Please help iPhone 4S won't turn on!

Okay so this all happened months ago when ios7 came out. I tried to update my iPhone 4S software straight off of my phone in the settings to ios7 and it wouldn't work. So than I hooked my iphone up to my computer and went on iTunes and tried to update from there manually. Everything was working it said like 95% done updating but than it said this operation can't be done. Now, my iphone won't turn on, it goes to the connect to iTunes screen, but i don't know what to do I tried to connect it to iTunes and it didn't turn on. Please help I need this iphone to turn on!

Assuming your phone was never jailbroken, try the following:
Install the latest version of iTunes on your computer if it isn't there already from apple.com/itunes
Reboot your computer
Connect the phone to a USB 2 port directly on your computer, not to a USB hub. If it is a desktop or tower computer use a port on the back, not on the front
Disable your antivirus and firewall
Launch iTunes
Connect the USB cable to the computer, but not to the phone
On the phone hold the HOME and SLEEP buttons for EXACTLY 10 seconds, then release the SLEEP button but continue holding the HOME button - if an Apple logo appeared you held too long; the screen should be black when you release the SLEEP button.
While still holding the HOME button connect the end of the USB cable to the phone
Wait until iTunes acknowledges the phone, then release the HOME button.
The phone should now restore. If it doesn't note the error number and post back.

Similar Messages

  • Please help, iPhone 3g 2.2 turning on problems!

    Just brought an iPhone 3g. gone onto itunes to update the firmware...downloaded successfully and when i went to install, it started then came up with an error saying it couldnt update.
    I then turned the phone off and on and now it just has the connect to itunes logo come up.
    I plug it into the comp, and it doesnt acknowledge the phone has been pluuged in.
    Turnd the comp off and on and still nothing. Just the connect to itune logo!
    Please help me!

    I plug it into the comp, and it doesnt acknowledge the phone has been pluuged in.
    Reboot. I think your USB driver crashed.
    If that does not help, uninstall (via control panel) ALL apple software, reboot (again) and then reinstall it all again.

  • Please Help!  MBP Won't Turn On... T_T

    So, my beloved MBP (2.4Ghz Core 2 Duo) finally bit the dust after years of service. Today, after work, when I press the power button, the sleep light turns on and I hear the faint sound of hard disk activation for a second. The screen stays black and there is never a startup chime. I've changed the RAM and hooked it up to an external monitor, but the monitor gets no signal and the MBP still does not turn on (same symptoms). After I leave it like this for 30+ minutes, nothing changes, but the laptop does get warm.
    So, is the motherboard dead? Please help!!!

    Although the lack of a startup chime bodes of other things, it may well be worth taking in the computer with this Apple article in hand:
    http://support.apple.com/kb/TS2377
    Your MBP has the nVidea 8600M GT chipset that is the subject of the Apple Repair Extension Program (REP) that the article details. Apple Stores and AASPs have a test gadget that will determine if the nVidea chipset has failed. If it has, the repair is free to you for a period of four years from date of purchase whether you have AppleCare or not. The repair consists of installing a new logic board.
    As you are in NYC, there should be an Apple Store nearby.
    If they determine the chipset has not failed, then you have the option of asking for a "Depot Repair." This is a flat fee service that pretty much fixes anything they find wrong as long as the case does not show evidence of damage. The fee is around US$300--much cheaper than a new computer. I do not know if the replaced DVD drive will negate your qualification for this service.
    One late-breaking thought: if you use headphones, can you here the startup chimes?

  • Please help motherboard(s) won't turn on

    After this story: https://forum-en.msi.com/index.php?topic=161402.0
    I know it was an asus, shame on me. I returned the Asus, and the pins were bent I believe in transport so no warranty  and bought a new MSI Z77A-G45 motherboard. Assembled the system again. Still no luck 
    Action for 200ms en then dead again.. I was fearing for the pins on the motherboard, I thought maybe I'm an idiot and Im doing something wrong with connection the cpu. But the pins are not bent so that's not it. I removed everything just a bare board. Plug in the power supply and nothing. Same problem.
    I don't believe all these boards are DOA. The changes of that are so minor. All I could think of next is the PSU. I connected the PSU to an older system boots just fine. Also just tried another PSU on this new motherboard.. same problem tries to go on but fails imminently.
    I googled and saw that like I thought a motherboard without a cpu should atleast go on, and maybe beep that the cpu is missing. But it should turn on. In my case it doesn't.
    Also when I plug the extra 4 pin next to the 24 pin connector on the motherboard it won't go on at all. Nothing nada, remove the 4 pin and it will try for a split second and die. (like stated above)
    I'm totally lost in this and I humbly like to ask some advice. I know in my last topic I've been a bit harsh and msi bashing.
    Btw, the supplier tested the first MSI board and found it dead as well. So somehow I dont think these problems are connected to the first MSI board.
    THANKS for your time/input!

    Quote from: xmad on 04-September-12, 07:55:21
    With all due respect, have you read through the manual that came with your motherboard?
    If it wasn't included with your motherboard it can be downloaded here:
    http://www.msi.com/service/download/manual-18064.html
    Refer to page 25 in regards to Jpwr1 & Jpwr2
    Re-install the mobo into your case after counting the stand offs and comparing them to the holes in the mobo after refering to page 24 of the manual.
    Install 2 sticks of ram for dual channel operations as seen on page 26 of the manual.
    Install your cpu and hook up BOTH  jpwr1 &  jpwr2 make sure you hook all 24 pins ups
    Then hook up the case connectors (page 35-40)
    Try to start it at this point/ w/o the discrete vga and let us know what happens. At worst with a bad cpu, it will spin up for a moment and enter a boot loop.
    Ofcourse this isn't my setup as I started. I had it all wired up and connected. Inclusing memory, vga, ssd etc. But it wouldn't start, and from that point you start removing part after part to get to the point where it will start. In this case it won't.

  • My iphone 4s won't turn on and it is in DFU mode, but my computer can read the device..... PLEASE HELP :((

    My iphone 4s won't turn on and it is in DFU mode, but my computer can read the device.... PLEASE HELP , and my iphone is not jailbroken

    http://www.youtube.com/watch?v=uuulql2u37U The title is "DFU Mode vs. Recovery mode - Which is Which? and How to Enter AND Exit (iphone, ipod, ipad) It helped me, Hopes it Helped you! Also you do not need to Restore! 

  • My Iphone 5 won't TURN on or OFF it won't do anything it's just showing the Apple logo the WHOLE time Please help

    MY IPhone 5 won't turn on or do ANYTHINGS please help

    Plug into computer then hold the lock and home buttons until it syncs

  • Iphone 4s won't turn on. broken lock button. It just randomly turned off and won't turn back on. Can't go to apple store because going on vacation. Please help

    iPhone 4ws won't turn on. I have a broken lock button. It just randmoly turned off and won't turn on. I can't go to the apple store because I'm going on vacation. Someone please help

    Your phone is broken; there's no magic solution for you.  You can try plugging it in to wall power and see if this turns the phone on, but if it doesn't, you can either go on vacation without your iPhone, or make the time to visit the Apple store before you leave.

  • My iPhone 4s won't turn on! help!

    My iPhone 4s won't turn off after being shut down at 60% battery. Tried every step I have found on here still nothing. It keeps vibrating when connected to computer please help!

    As long as you have iCloud Back up on automatic you will be fine ,thats the roll of iCloud .About the Phone have you tried booting it in recovery or DFU Mode?

  • My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone

    My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone

    Yes ive tried a different charger and it also nothing shows when i plug it in just makes a noise

  • Help! iPhone 4 won't turn on!

    My iPhone 4 won't turn on, all I did was hold down the home and sleep/wake button and let go of sleep/wake button but still hold home button and then tried turning it back on and it wouldn't turn on! Help! Need my phone back!

    You need to hold the sleep/wake and home buttons together until you see the Apple logo and then release them both.

  • HT4972 i have updated my itunes but when im restoring my iphone 5 phone it keeps coming up with 'unknown error occurred (3) please help as i cannot even turn my phone on now

    i have updated my itunes but when im restoring my iphone 5 phone it keeps coming up with 'unknown error occurred (3) please help as i cannot even turn my phone on now

    Hello there, BundyA.
    Error 3 is usually associated to security software settings. The following Knowledge Base article provides some great information and links for troubleshooting the issue:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    This section should prove useful:
    Configure your security software
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
    Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My iPhone 5 won't turn on, the screen just stays black!

    My iPhone 5 won't turn on I have held the power button to see if it's dead or not and it doesn't seem to change the screen it just black I thought the battery could of died or something similar it only happened about 2 hours ago please help!

    Hey Thermali,
    Thanks for the question, and great troubleshooting so far. To completely isolate the issue, you may want to follow these steps:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    - Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    - Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    - Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    - After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    - If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    - Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
    restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    - If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    For additional information, see this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thanks,
    Matt M.

  • In my ipad mini sound is there but somehow display turned off....please help...how to turn on the display

    In my ipad mini sound is there but somehow display turned off....please help...how to turn on the display

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • My iphone 3G won't turn on after I installed fonts

    My iphone 3G won't turn on and it just stuck on apple logo then loading then turn off then that apple logo appears again .Please help me to fix this problem

    As I thought, which means your iPhone has been hacked, which is not supported by Apple directly or indirectly via these discussions. You need to contact whoever you downloaded the garbage from that allowed you to hack your iPhone and/or the garbage fonts for support with this.

  • My iPhone 5s won't turn on

    My iPhone 5s won't turn on. All it does whenever I hit the home or power button is flash the apple logo several times. I've tried plugging it into a power source and it does the same but the logo flashes faster, same goes for when I plug it into my MacBook. It won't even recognize my phone so I can't restore it through there. I've tried everything I can find on the internet and nothing's working. Someone please help me.

    I've tried doing a restore but an error comes up. I have no idea what to do now.

Maybe you are looking for

  • Re-download and re-installation of licensed program

    In connection with a crash my photoshop elements program (for which I have a license) disappeared. How can I download and re-install the program?

  • Order Status not appeared in /DBM/ORDER

    Hi all, one of our branch cannot view the Order Status through T.Code /DBM/ORDER I've checked and found out that previously the plant configuration incomplete and does not included in "Assign Procedure for Order Status (SPRO). However i've transport

  • Table of contents - self listing

    Hello, I've already found a solution on this forum for my question but I'm hoping an expert can explain to my why something doesn't work as I expect it. Problem: When you make a table of contents (ToC), the entry for the ToC....page # doesn't appear

  • TS3276 how do I save changes in mail accounts preferences?

    how do I save changes in mail accounts preferences? I add and delete mail accounts but when I close and then reopen mail, my changes are not saved, despite messages within the mail window saying that my changes are saved.

  • Screen Resolution & Beep Sound

    Mine is T400 bought in NUS, Vista OS. Very happy experience using this fatastic laptop, only a few minor questions First question is How I can set my screen resolution high than 1280*800, which is right now the highest I can find on the display setti