Please help! iPod isn't working... : (

*_My iPod isn't working and nothing responds to it, so I sent it into Apple. They said it was submerged in water (even though I only had it a week and it didn't get near water) so I need to try to get it fixed. I would like to know if there are any recommendations on where to get this fixed and if anyone has an estimate as to how much this may cost. Any information or comments are usefull-please and thank you._*

These people will give you an estimate: http://www.missionrepair.com/iPodTouch_Diagnostic_Servicep/222-1000.htm

Similar Messages

  • Please help Ipod Classic stopped working

    My Ipod Classic has stopped. I followed previous instructions. to get to the white screen and the hard-drive and now instead of the red cross it says
    SMART DATA  (Cant open device)  ERROR! Diag Holt
    What do I do now?

    Did you try a hard reset?  To do this, make sure the hold switch is in the Off position.  Then press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.  This may or may not work the first time around, so give it a couple of tries if necessary.
    B-rock

  • Hello Please help me   I have worked erased     IPhone exists with me     But did not finish the process erased     What is the solution??

    Hello
    Please help me
    I have worked erased
    IPhone exists with me
    But did not finish the process erased
    What is the solution??

    Post in your native language, the above make not sense.

  • Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

    Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

    Many, many thanks for both of you Todd and Rick.
    to Rick:
    I suppose you mean the Color Settings in Project Settings as follows:
    - Working Space: None
    - Match Legacy ... Gamma Adjustments checked ON
    But it does not correct the colors in effects. And checking or unchecking Make Movie/Output Module Settings/Color Management/Profile/Preserve RGB does not make any difference.
    to both of you:
    Those parts of the video image that does not have color effects are just fine. In these parts the color is preserved when reimporting to FCP. However, those parts having color effects (except Levels, as decribed earlier) have altered color results. So, only the parts having effects affecting color are misinterpreted in the image area. The mismatch is of course seen in AE, before making the movie.
    What I ment with "Color Management not working properly" is that (instead of "disabling" it) Color Management does not seem to be able to correct this "misinterpretation" or difference in effect handling between AE 6 and 10.
    So, would you have any solution for this problem?
    Again, many thanks for your fast replies!

  • Hello to you all, my Macbook Air won's boot up and upon diagnosis, i realized my startup disk is full to 99% even with 2GB Hard Disk space. It wont also enable me boot into safe mode too. Please help as all my work documents and project files are on HD

    Hello to you all,
    My Macbook Air won's boot up and upon diagnosis, i realized my startup disk is full to 99% even with 2GB Hard Disk space. It wont also enable me boot into safe mode too.
    when i power up, i get this prolong gray screen which wont change screen but remain so. Infact i am handicapped.
    Please help as all my work documents and project files are on this machine and i can't afford to loose them all...
    Please, should you have any solution please send me the details to [email protected]
    Thanks you a millionh times.
    Al.

    The MBA seems to cause several problems to several users on boot ups
    On start up my MBA would not boot up the apple logo came on but only a blank screen appeared no fan i followed several start up recommendations but to no avail so I  took the MBA to the nearest Apple repair centre again the same symptoms on start up ......very sorry sir you need a new mother board that will be $500 not feeling confidant in the product declined and was going to put it on ebay for spares.
    On return home I pressed the start up button and it started normally everything was working fine i decided to reinstall all the software what has caused the problem I have no idea but it is after several attempted reboots it finally started on its own so don't give up if you have this problem it may come to life

  • Error 213.5 Please help me get DW working again. Thanks CaptJim4685

    I have a Mac OS 10.10 used the Migration Assistant to move all files from old computer to new computer yesterday. Now can not use my Dreamweaver CS 5.5 program I have my original install disk. Tried that. get error 213.5 Please help me get DW working again. Thanks CaptJim4685

    Hi Nancy O.
    Thing is, I was using it on my old MacBookPro, also w/ yosemite. No problem. So I think it should run on the new one with the same OS.
    I did figure out how to find the CC cleaner log file. It had a lot of stuff in it, but did not indicate any kind of failures. I did not see the word “failure in the log file at all.
    After your suggestions, I went thru all the steps again - twice - very carefully emptying the trash between steps and restarting. Got the same error message at the end.
    Now, I still have 5.5 working on the old computer. That was my first and only install. My notes suggest  I installed it in 2011.
    If I knew for sure that if I deactivated it (if I knew how to do that) on the old computer, and uninstalled it, AND I could then count on the install working on my new computer, I would do it, but I am afraid to do that for fear that then I wouldn’t have it to use at all.
    I had expected it to transfer over, and then I would clean the old computer, as my son wants it for his wife, They have no use for DW.
    I also had trouble w/ MS Office, but they allowed me to call them and get a new install code. Now that Works fine.
    I wish Adobe were as accommodating. I have my original install disk & code. I never expected any of this trouble.
    I hope you can come up with a new plan. I really can’t afford to buy a new copy, especially when I know that this one should work, if it would just get rid of this blocking action.
    I only use it for editing my own personal family website: http:www.americanfenner.com.  I am not a webmaster/webwriter/ computer programmer or anything like that. Just an old guy doing personal stuff on my mac.
    Jim Fenner
    [email protected]

  • HT4906 hello, my hard drive broke. I purchased a noew one. Now I have no access to Iphone or any of my old apps. even after I reldownload them. Please help. Important fro work.

    hello, my hard drive broke. I purchased a noew one. Now I have no access to Iphone or any of my old apps. even after I reldownload them. Please help. Important fro work.

    Not ure what this has to do with iPhoto. Perhaps you'd be better off asking on the forum for your MacBookPro.

  • Please HELP, "iTunes has stopped working" error after connecting iPod video

    People please help me out!  I have a Razer Blade gaming laptop with Windows 8 64bit.
    I have an iPhone 5, iPad 2 and an iPod video (80GB).  I had some weeks from not connecting the iPod to my computer, but this morning that I did so I can upload some new music to it, iTunes just crash, I get the "iTunes has stopped working" error message when I connect the iPod video.  I do not have this problem with either the iPhone 5 or the iPad 2, when I connect these, iTunes works fine, once I connect the iPod, then all goes down
    Procedures that I already tried and that were unsuccessful to solve the problem:
    Uninstall Quicktime
    Uninstall iTunes and reinstall
    Reset the iPod (several times)
    Delete TEMP files on computer
    Restart the computer (several times)
    Use a different cable and a different USB port
    The iPod is working fine, if I plug it to my car stereo or if I use it with headphones it works great, no problems nor errors.  My computer also identify the iPod as a hard disk, no error messages from Windows, it is just the freakin' iTunes that freezes everytime that I plug the iPod
    PLEASE HELP ME OUT, I've searched forums on this particular issue but with no luck.
    Thanks very much!

    It is only when I attempt to add a song to my iPod once plugged in that I receive the error "Itunes has stopped working" and forces me to exit the program, without the song being successfully transferred.
    Do you have the "Convert to 128 kbps AAC" preference enabled for syncing to the iPod, laur?
    If so, it's quite plausible that you've got the iTunes 10.1.0.54 bug and we need to get you updated to 10.0.1.56 as per the following document:
    [iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio|http://support.apple.com/kb/TS3591]

  • PLEASE HELP IPOD NOT WORKING EVEN AFTER FACTORY RESET!!

    I am having terrible problems with my ipod mini... it was my sister's earlier and I got it because she gave up on it. I have done everything in my power.. tried the 5'R's, reinstalling itunes, and everything INCLUDING the factory reset, and the same thing is persisting... the exclamation mark with file, and it just says to visit http://www.apple/support/ipod, which i've gone to several times, read everything relavent, and still nothing helped. Please someone help, any thing could work so please, i'd really appreciate it, I look foreward to your opinion!!

    iPod Folder with Exclamation Point After Disconnected From Computer
    iPod Folder with Exclamation Point After Turned On
    Good Thread About iPod Sad icon/Folder with Exclamation Point
    I hope this helps!

  • PLEASE HELP - Ipod Showing In My Comp But Not Itunes Etc

    Hi there
    Can someone PLEASE help me! I am at my wits end with my Ipod.
    A few weeks ago I was in the middle of listening to a song and my ipod crashed then switched itself off. Ever since then I haven't been able to get it to connect to Itunes or the Updater and it won't play anything.
    When I switch the ipod on I get various errors ranging from the unhappy ipod to the folder with the exclamation mark.
    When I connect my ipod to my pc an autoplay window appears and sometimes I get an error saying the drive my ipod is connected to isn't formatted.
    So far I have tried the following
    Reinstalled Itunes
    Going into Disk Management and changing the Drive the ipod uses
    Reset The Ipod
    Tried Using Another USB Port
    Put the Ipod Into Disk Mode
    Nothing Works! After I changed the drive the ipod uses things looked promising. The Ipod was detected by the updater and it was started to restore the ipod however after a few minutes the ipod seemed to lose the connection and I got the error with the Battery icon.
    Can someone please help me!

    "my dad pressed view and then he chose the 3rd picture thing and songs went into."
    Sorry, I don't know what that means.
    Have you had a chance to look through these?
    USB drivers are not installed properly or are out of date.
    iTunes 7 doesn't recognize the iPod.

  • Please help. ipod will not show up and i have tried everything

    i got my ipod two days ago. ipod nano 4gb.
    when i plug it into my computer it comes up with 'do not disconnect' and occasionally a small circle icon in the top left-hand corner. the computer recognises that there is a 'mass storage device' connected, but the ipod doesnt appear in itunes or my computer.
    when i unplug the ipod it displays the apple symbol and then goes to the language selection menu. after i disconnect it i also get a message saying that the file could not be saved to the drive because it was interrupeted or something like that and i should try storing it somewhere else.
    so thinking that maybe this was it being updated, i let it plugged in all day while i was at school because surely that would be plenty of time for anything to load onto it. But when i got home today it did the same thing.
    I have two computers and the same thing happens on both.
    I have tried it using my sisters usb cable, still nothing works.
    Any ideas? Oh on one of my computers it doesnt let me uninstall itunes as well.
    And when I try to open the updater to restore the ipod it freezes the application and i have to do controlaltdelete and close it.
    I am SO angry about it right now.
    Since i only bought it a few days ago do you think i could get a repleacement from the store where i got it or will i have to go all the way through apple.
    I havnt been able to use it once and it is making me very frustrated, please help me if you have any ideas.
    x
      Windows XP Pro  

    Sally,
    OK since you using 2 computers, we will first focus on the one that will not uninstall iTunes, afterwareds we will get the ipod working on one PC first.
    On the PC that will not uninstall iTUnes, goto control panel>add and remove and try if you can to uninstall iTUnes AND quicktime. Then go here and roll down to "Clean up iTunes installer files on the computer" http://docs.info.apple.com/article.html?artnum=93976
    Once done disable any antivirus or security programs, then goto apple.com to download and install the latest iTUnes.
    Also on BOTH pcs make sure you have "ipod updater 06-28-2006" you can download and install it here http://www.apple.com/ipod/download/
    Once iTunes is properly installed on this PC, you need to only connect your nano to the main PC you use for now so we can get it working, then we'll focus on the other PC if needed

  • Please help - Ipod freezes when playing any video

    Hi
    I only got my ipod video a day ago and it wont play any video files. Everytime i go to play a video it freezes and just shows a black screen. I have tried downloading a music video from the itunes store and this wont work either. When i first got it i did play one video, im not sure if this was before i updated the firmware though?
    I cannot figure out how to reset the firmware if this is what i need to do?
    I would really appreciate some advice.
    Thanks in advance.

    I just got my iPod like two months ago and it wouldn't play any video podcast until I downloaded the new iTunes software. Now it plays some video podcasts but not all. I tried to watch some new podcasts I had downloaded from iTunes and it would play some of it then just freeze and make these wierd sounds. I tried again and it totally froze where I couldn't do anything, not even turn it off. It stayed that way until the battery was completely drained then it turned itself off later that night. The next morning I charged it up and it worked fine but I still can't watch those podcasts. Please help, cause this thing is pretty much brand new and for the amount of money I spent on it I don't want it to start giving me problems after only two months.

  • Please help et mi nano working again

    The following happened to me.
    I copied file to my IPOD nano in windows explorer. After doing this my nanos is not recognized by windows. I get a message that the usb device is not working propely and I cant see the nano in the exporer anymore. It doesnt work with Itunes either.....
    Please help anyone.. I have noidea what to do to get it working again
    Thanks

    Thanks for the tip.
    I think that it could help if I can get my nano restored. The problem is that i cant get it to connect to the computer. When it doesnt connect to the computer I cant restore it that way. Is there any other way to restore the Ipod?
    I tried to connect the nono ti two different PC:s. It got it connected before "pasting" the fili on the Ipod:s harddisk (copied and pasted in windows explorer). After I did this I only get the error message that there is something wrong with the connection.
    Besides this the Ipod is working fine (can listen to music as earlier). It is even chargeing when it is connected to the usb cable. But I just cant get it to communicate with Win XP anymore.
    Please give me some advise if anyone have a clue what to do or heard of someone with similar problem.
    Thanks!

  • PLEASE HELP, Ipod corrupt

    I have a whole list of events that happened, but the worst part is, my ipod still will not work with my itunes. Here's my story (i'm trying to put in as much detail as possible for hope that somebody can help):
    I have a 30GB 5th generation Ipod video, and I use windows XP. I've had this Ipod for about 2 months and it worked great using Itunes 7.0 and 7.0.1.
    I updated to Itunes 7.0.2 and the next time I plugged in my ipod, the itunes didn't recognize it, nor did my computer. I went through a series of steps with an apple agent, including renaming the disk drive letter, and finally my Ipod would be recognized. Everytime the ipod was plugged in however, this "autorun" program began to run. It So eventually when the autorun would stop, it kept saying "This ipod may be corrupt. Restore it, or try disconnecting and reconnecting it". Once I got this message that said "an unknown error has occured [1418]. I've uninstalled and reinstalled itunes, and nothing seems to work.
    So I restored it. And then it restarts, and once again I get the same message over and over again. I keep restoring it and it doesn't work. So the agent told me to send it to apple for repairs.
    So apple sends it back saying nothing was wrong with the Ipod. But it still keeps saying it is corrupted on itunes.
    So I talk to another apple agent, and we go through another series of steps, and now the Ipod is not recognized by itunes anymore. I downloaded itunes 6.0 which wouldn't work with my existing libraries, so I went back to the original 7.0 and it still doesn't work.
    PLEASE HELP ME i'm dying without my ipod!

    This program http://www.copytrans.net/doctor.php may fix it up.

  • Please Help--It Won't Work At All!!!

    Today when I was using my iPod, the battery went completely down, to the point where I had to charge it. I plugged it into the computer, and iTunes didn't come up. So I took the USB cable out and plugged it back in. Still didn't work, so I manually brought iTunes up. My iPod is all black, and nothing works. On iTunes, it doesn't give me the option to sync my iPod. The battery is totally drained, so I can't toggle it or reset. Can someone please help me??!!??!!
    Kellie

    Quicktime or Quicktime Pro (which iTunes uses) don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
    See:iPod plays video but not audio.
    You need a 3rd party converter to convert the file with both audio and video.
    See this for help: Guide to converting video for iPod (Mac/Windows).

Maybe you are looking for