Please help! it concerns about E71

I need to download a windows live messenger to my mobile E71
May I know from where can we install that software?
And will they charge if I used it for chatting and stuff?
Thankssssssss in advance!
I'll be very grateful for your help

You can download and install using the link below.
http://europe.nokia.com/get-support-and-software/download-software/windows-live/compatibility-downlo...
There could be network charges if you use GPRS or 3G but free if you use a free wlan.

Similar Messages

  • My iPAD 2 won't restore or update or turn on! Please help I'm about to cry

    Good afternoon everyone :s!
    I was recently gifted an iPAD 2 and there was an iOS 6.1 update so I went and tapped on it. Bt insead of telling me yada install noow or it's done, my iPAD displayed a screen with itunes logo and a usb connector.
    SO I went ahead and connected the iPAD o the iNES n my laptop, the latest itunes version, only to notive it'll take like 24 hours to update. Tha and the fact that my iPAD would turn off then on every 10 minutes or so and so I had to click on ok every 10 minutes on iTunes
    I didn't sleep the whole night just to do that and in the morning, after the download was done, the file "was being processed" and then pouf! the freaking iTUNES displayed some kind oof 3251 -I think - unknoown errror and wentt on launching the same download again!
    Please help me! get me out of this freaking loop or just tell me what is going on?
    Ae tthe freaking updates supposed to ruin everything????????

    Disable your firewall and antivirus software and try recovery mode in order to restore the iPad.
    You can read about it here.
    http://support.apple.com/kb/ht4097
    Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • Please Read if Concerned about Bending iPhones

    In the past few days, there has been a lot of debate, questioning the structural integrity of the iPhone 6/6 Plus; is the iPhone 6/6 Plus prone to bending? Since the number of threads, regarding this issue, has increased, I'd like to alleviate some concerns by providing you with enough information to draw your own conclusions and make a well informed decision. You don't have to agree with my findings, but please be respectful in your comments.
    Short Answer:
    The short answer is No; there is no cause for concern about your iPhone 6 or 6 Plus bending in your pocket, unless normal use for you is exerting over 90 lbs of external force, which is highly unlikely for most. This test was conducted by Consumer Reports in a controlled environment in which the force applied was accurately measured. If you're concerned you might expose your pocket to 90 lbs of stress or more, you shouldn't be. Only 9 people out of 10 million iPhone 6 Plus users have reported a bent phone; which means that .00009% of iPhone 6 Plus users have actually subjected their devices to 90 lbs of force, or more.
    If your skeptical, or would like to know how I arrived to this conclusion, then please read further. I’ve provided a detailed explanation with supported links to articles and videos for your convenience. 
    Detailed Explanation:
    Most media outlets were quick to judge the iPhone 6 Plus, basing their reports from this youtube video below that went viral, along with massive retweets of bent iPhone 6 Pluses, circulating on the web. 
    https://www.youtube.com/watch?v=znK652H6yQM
    If you watch the video, you'll notice the phone doesn't bend on a dime; he's applying an aggressive amount of force when bending his iPhone 6 Plus. Because that force wasn't measured, you cannot conclude whether it accurately depicts normal or extreme conditions for which your phone may be subjected to.
    The same person posted a follow-up video in which he force bends other phones for comparison. Again, since the force being applied to each phone was not scientifically measured, there's no way to verify if more or less force was used to bend each phone being compared. For example, if he was fatigued from bending the first phone, then it's possible less force was applied to the subsequent phones in succession. You can watch his video below. 
    https://www.youtube.com/watch?v=IROcoJeVfSI
    As a result of this growing buzz, Apple's stock price took a hit to which they finally responded, stating there's no cause for concern with normal use. It's an extremely rare case, as only 9 people out of 10 million have reported a bent iPhone. You can read about it in the Wall Street Journal, below.
    http://online.wsj.com/articles/apple-defends-against-complaints-of-bending-iphon es-1411668618
    After reading Apple's response, the first thought that came to mind was "damage control", and I was somewhat skeptical of that low number (only 9 people reported a bent phone). It prompted me to do a little more research.The guy in the unbox therapy video, along with most other media outlets, kept boasting about an "increasing number of reports" of users with bent iPhones. I was guilty of saying bend-gate was a legitimate concern due to an increasing number of reports. But I hadn't actually verified that number; I was echoing what I had heard from other media outlets. In my research (or online search), I could not actually find a significant number of complaints of bending, from actual iPhone 6 Plus owners. Because I was unable to verify these “increasing number of reports,” suddenly Apple numbers didn't seem that far fetched.
    In contrast to videos posted by Unbox Therapy, Consumer Reports performed their own tests in a controlled environment in which they actually measured how many pounds of pressure it took to deform phones from a variety of different manufactures, including Samsung and Apple. Does this test reveal that some of the competition is less prone to bending than the iPhone 6/6 Plus? Absolutely, but keep in mind the iPhone 6 Plus is thinner, but more importantly, its structural integrity shouldn't be a concern, if your normal use doesn't exceed the breaking point of 90 pounds of exertion.
    http://www.consumerreports.org/cro/news/2014/09/consumer-reports-tests-iphone-6- bendgate/index.htm
    Factoring Apple's response, stating a total of 9 people out of 10 million reported bent iPhones, along with the tests performed by Consumer Reports, I was able to come to this conclusion. If Apple’s numbers are remotely accurate, it means only .00009% of iPhone 6 Plus users have actually bent their phones, which also means it's probable those bent phones were subjected to external forces of 90 lbs or greater. Even if the margin of error was give or take 1,000 phones, the probability of someone bending their phone would still be extremely low.

    ckuan wrote:
    Apple Stock price always took a beating no matter what it is.
    Apple stock price is subject to all kinds of manipulation with real news or generated (false) news.
    I don't disagree, but my point is while a declining stock price may be inevitable as a direct result of this news, perhaps faster damage control by Apple's PR could've softened the blow, and maybe not get hit as hard.

  • Please help me put about this mac more info back to the original setting

    my macbook pro, when i click about this mac and when I click on more info it doesnt show the orignal screen about the mac instead it show a big screen with alot of info, please help me fix it to the original way

    If the System Profiler application isn't in the /Applications/Utilities/ folder, the More Info button will be dimmed. Look for this application elsewhere on your hard disk; if it isn't on the hard disk, use Pacifist to extract it from your Mac OS X installation disks and then run the combo updater for your version of Mac OS X.
    (17644)

  • Please help me with Nokia E71 very strange problem...

    I have Nokia E71_v1, I got lots of strange problem like:
    1- The camera didnt save the images and create the images like this: Name of the image*jpg but I can take videos without a problem.
    2- when I put anything in the memory card or the phone memory it became currpted and then I couldnt open them at all, the message "can open the file" or "file is currpted" appears.
    3- I couldnt install any application to the phone, if I put any sis file on the memory I get "file currpted" message but if I sent it to the phone via bluetooth I could install it.
    4- The name of the folders usually change their name and currpted characters appeard in the folder naming.
    5- When I added any mp3 files to any memory the files are disappeared.
    410.21.010
    RM364
    Noka E71-1 (19)
    please help
    Attachments:
    090620091272.jpg ‏242 KB
    090620091273.jpg ‏299 KB

    You better reset the E71. Dial *#7370# 12345 reformat, you'll lose all data. Make a backup first and restore without the settings. Reformat the card in the phone and remove the card using the menu from the power button. Do not encrypt the card as a test.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Please help me..about JTable ..Please please

    I have a JTable and tried to set the width for its columns..but I dont
    know why it doesnt work..here's my codes:
    Please help me..thanks..
    import javax.swing.table.TableColumn;
    import javax.swing.table.*;
    JTable table = new JTable();
    //a method{
    DefaultTableModel model = new DefaultTableModel(rowData, columnNames) {
    public boolean isCellEditable(int row, int col){   return false; }
    table.setModel(model);
    TableColumn column = tblEntryList.getColumnModel().getColumn(0);
    column.setPreferredWidth(25);
    column = tblEntryList.getColumnModel().getColumn(1);
    column.setPreferredWidth(100);

    I did feed the data into the table..you can tell by looking at my codes..
    please show me..dont know why it doesnt work.
    I just have my tlbEntrylist declared as
    String[][] rowData = new String[0][];
    String[] columnNames = {"Cnt","Name","Text"};
    JTable tblEntryList = new JTable(rowData, columnNames);
    //then whenever I click a a button , will call loadTableEntries()
    to remove all row data and refresh with new data..so I have to
    set new new model for this table.
    private void loadTableEntries()
    tblEntryList.removeAll(); // Remove old entries
    Object[][] rowData = new Object[entries.length][3];
    //feed the table of new data
    for(int i=0;i<rowData.length;i++)
    rowData[0] =new Integer(entries[i].getTimesUsed());
    rowData[i][1] = entries[i].getName();
    rowData[i][2] = entries[i].getText();
    String[] columnNames = {"Cnt","Name","Text"};
    // Create a new model and load it with new values
    DefaultTableModel model = new DefaultTableModel(rowData, columnNames) {
    public boolean isCellEditable(int row, int col){   return false; }
    tblEntryList.setModel(model);
    TableColumn col = tblEntryList.getColumn(tblEntryList.getModel().getColumnName(0));
    col.setPreferredWidth(10);
    col = tblEntryList.getColumn(tblEntryList.getModel().getColumnName(1));
    col.setPreferredWidth(25);
    I dont know what i'm doing wrong here but it ddint work..

  • Please help... about multiple form..

    hello guys,
    when I try to pass parameter to another form, I get following error
    FRM-47023:No such parameter...
    I double check that no error with parameter name...
    well, I get information that we should set FORMS_60 path or
    For R12 set FORMS_PATH and for 11i set FORMS60_PATH to refer $AU_TOP/forms/US
    For eg:
    FORMS_PATH=$FORMS_PATH:$AU_TOP/forms/US
    I don't know well how to that...
    is there another thing I miss??
    please help
    Regard.

    well guys,
    thank you very much for all your help.
    I have double checked again n again.. now it work.
    But it stranges, there are two blocks. STUDENT (in the caller form) AND STUDENTENROLLMENT(STUDENT as Master, Enrollment as detail) in the calling form.
    But when the STudent calls STUDENTENROLLMENT, it's true the value is passed to The Master block, but nothing changed on The
    there is only one parameter names P_1
    I make program unit on STUDENT. ADD_ENROLLMENT
    >
    PROCEDURE ADD_ENROLLMENTS IS
         v_plist_id     PARAMLIST;
         v_where               VARCHAR2(50);
    BEGIN
    v_plist_id := GET_PARAMETER_LIST('forms_params');
    IF NOT ID_NULL(v_plist_id) THEN
              DESTROY_PARAMETER_LIST(v_plist_id);
    END IF;
    v_where := 'STUDENT_ID = '||:STUDENT.STUDENT_ID;
    v_plist_id :=CREATE_PARAMETER_LIST('forms_params');
    ADD_PARAMETER(v_plist_id, 'P_1', TEXT_PARAMETER, v_where);
    COMMIT_FORM;
    CALL_FORM('STUDENTENROLLMENT', NO_HIDE, NO_REPLACE, NO_QUERY_ONLY, v_plist_id);
    END;>
    this is the trigger WHEN NEW FORM INSTANCE at the calling form.
    >
    DECLARE
         v_where varchar2(50);
    BEGIN
         IF :PARAMETER.P_1 IS NOT NULL THEN
              v_where := :PARAMETER.P_1;
              SET_BLOCK_PROPERTY('STUDENT',DEFAULT_WHERE,v_where);
              EXECUTE_QUERY;
    SET_BLOCK_PROPERTY('STUDENT',DEFAULT_WHERE, '');
              GO_BLOCK('ENROLLMENT');
         END IF;
    END;
    >
    Regard.

  • PLEASE HELP i am about to crush this dang thing! im about to CRY!! AGHH!

    i SENT IN my first disfunctional ipod for service and got one back, and nothing has changed! so i would assume it was the computer that is the problem, but my sister uses the same computer as i do and hers works perfectly!!
    i put the songs on my ipod, the computer recognizes it and they go on there fine, but i take it out when it says to and it plays NOTHING. while its plugged in, it blinks or has a solid orange light, then when i take it out it does NOTHING, it just lights up solid green. i have tried EVERYTHING!! seriously, restoring, restarting the computer, deleting and putting back all songs, PLEASE HELP I AM DESPERATE!
    Dell   Windows XP  

    Have no fear! The ishuffle works!
    what i just spent 2 hours doing to fix the lil butthead:
    my shuffle symptoms:
    -endless orange flashing while in port
    -no songs being played
    -yes it had a green light for battery power
    -shows that all songs are in shuffle in itunes
    -i had a "internal manager error" when i tried to reset my shuffle in the ipod setup- so it would not let me re-register my ipod. grrr
    what i did to cure it:
    -go to your control panel:
    1.) uninstall itunes, and aything related to itunes that you see
    2.) AND uninstall REALPLAYER!!!!!!!!!!
    *real player kept acting as my default ipod host when i would put my ipod in the port. THEN itunes would come up. ANNOYING AS ALL ****! (and i think a part of the problem, i uninstalled JUST itunes, and reinstalled it, and my ipod setup did not work- same "internal manager error"!) so, do as i say and get rid of that stupid realplayer.
    3.)restart your computer
    4.)install itunes
    5.)restart your computer
    6.)do the "ipod setup"
    7.)restart your computer for good luck. . .
    8.)plug in your lil shuffle, rename it, and DOWNLOAD a song that plays! weeeeeeeeeee
    it worked for me!
    Compaq Presario   Windows XP Pro  

  • Please help advise me, About OID

    Hi
    I see OID javadoc ,Subscribe class will have getUsers method return User[] and I try to use this method but result of user array is not have data return.
    Please help advise me, how I get user list from OID?
    This is my code
    import oracle.ldap.util.*;
    import oracle.ldap.util.jndi.*;
    import javax.naming.NamingException;
    import javax.naming.directory.*;
    import java.io.*;
    import java.util.*;
    public class ListGroups
         /* Constant Value For Get User From OID */
         final static String ldapServerName = "test20";
    final static String ldapServerPort = "420";
    final static String rootdn = "cn=orcladmin";
    final static String rootpass = "iamverysmart";
    final static String subscriberDN = "dc=test,dc=com";
    final static String userDN = "cn=uglyboy,cn=users," + subscriberDN;
    public getListUsers()
    // Create the subscriber object using the default subscriber
    Subscriber mysub = null;
    String [] mystr = null;
              try
                   InitialDirContext ctx = ConnectionUtil.getDefaultDirCtx(ldapServerName,
    ldapServerPort,
    rootdn,
    rootpass);
    RootOracleContext roc = new RootOracleContext(ctx);
    mysub = roc.getSubscriber(ctx, Util.IDTYPE_DN, subscriberDN, mystr);
                   User [] myuser = null;
                   String [] attrs = new String[2];
                   attrs[0] = null;
                   myuser = mysub.getUsers(ctx
                                                 ,Util.IDTYPE_FILTER
                                                 ,subscriberDN
                                                 ,null
                                                 ,attrs);
                   /*After I try to get users, length of array is equal 0 */
                   for(int i = 0; i < myuser.length; i++ )
                        System.out.println(myuser.getDN()) ;
              catch(Exception e)
                   e.printStackTrace();
    After I tried to debug, I see array is result of getUsers method have length = 0
    Please advise me .
    Thanks

    Hi,
    since this is primarily a JDeveloper and ADF forum, i suggest to post yur question to the OID and J2EE forum as well
    Frank

  • Please help I am about to break my 2 week old Ipod because it has frozen

    My Ipod froze when I connected it to my computer and the computer isn't recognizing it. I tried holding the middle button to reset it, but that isn't working. PLEASE HELP. Do I need to send it away?

    To reset it toggle the hold button a few times then, with it not in hold of course, hold both the centre and menu buttons down together for at least six seconds to reset it.

  • Please help, simple question about Smart Playlists and Live Updating

    PLEASE for some reason I've never gotten an answer on this.
    I have a Smart Playlist called "Recently Played" with Live Updating. No matter how I set the parameters, the most recently played *song will ALWAYS appear on the bottom of the list when using my iPhone on the go.* I bolded that because I want you to be aware I'm not talking about on iTunes - I'm aware you can change how the list is viewed on iTunes.
    When using your iPod/iPhone on the fly and Live Updating is enabled, is there any way to make the most recently played song appear at the very top???
    Thanks so much

    Haven't seen that problem before but try the following: in iTunes, right-click the playlist name and enable the option "Copy to Play Order." Then sync.
    The normal use of "Copy to Play Order" when you have the playlist displayed in iTunes in some sort order, but you want it to display in the iPod in shuffled order (as it will actually play). Different problem than you are observing, but the same thing "might" help.... Let us know.

  • Please help a LE About-To-Be-Newbie?

    Hi there,
    I've just ordered Logic Express, and it will be here, probably, by Monday. I currently use a Roland VS2000, and have found 12 tracks @ 24 bit a bit confining. My Indigo iMac recently died, and, as I couldn't bring myself to adapt to my wife's PC, I bought a new 2GHZ 17" Core 2 Duo, with 2 gigs RAM. I am loving this machine, but it then occurred to me that I could use it to expand, or even replace, my VS2000. I've done a little research, and am aware that I will need a good firewire audio interface (I am leaning toward the RME Fireface 400) and an external FW HDD. Always something more to buy....sigh....
    A few weeks ago, I downloaded the Trial LE 7, and haven't really been able to do anything with it, except import other music files from my computer and play around with them a bit (I did enjoy reversing the envelope on The Beatles' 'And I Love Her'). I found getting LE to do what I wanted quite frustrating, for the most part, but I am willing to take the time to learn. So, this brings me to my questions:
    1) I do not have an audio interface yet. Is it possible that, when Logic was setting up, that I didn't set something correctly? Because I assume that I could've input audio via the mic on the iMac, but I couldn't. I get the message that it is using the stock audio/MIDI set-up that comes with the iMac. Yet, no audio recorded. I know this question is a little confusing...
    2) I recently bought a USB MIDI cable, and it works fine within Garageband, but not in Logic Express. Can anyone suggest a reason for this? Other than user ignorance, I mean....
    3) When I tried to access Appleloops, I was told that LE Couldn't find any. They're there, I use them in Garageband. Is there any reason why LE can't find them?
    4) Finally, it is going to be a little while before I can afford the RME Fireface, so I am wondering if I can just use the MIDI via the USB interface to slave to my VS, triggering sounds from my JV-1010 sound module. When I do get the Fireface, will it be easy enough to alter the settings for its optimal use?
    I've been using all-in-one Roland boxes since '98, so I am pretty well completely lost when it comes to the ins and outs of computer-based recording. Any help will be greatly appreciated!
    Cheers,
    Glenn
    17" 2 GHZ Core 2 Duo iMac 2 gigs RAM   Mac OS X (10.4.8)  

    Hey Paul,
    I guess it is kind of difficult to determine one's
    intention without the emoticons, sometimes.
    I get into trouble sometimes..
    Do you have many fanboys?
    I meant me, for RME.. I leurve them.
    At a site where you moderate, I believe, I asked
    about all of this stuff about a month ago, and it was
    you who put the Fireface idea into my head (I was
    thinking a MOTU Ultralite, which is about €350.00
    cheaper).
    You mean (shameless plug) http://www.logicuser.net. That's you then, nice.
    Anyways, thanks for the offer. I may take you up on
    it.
    Please do.
    It took me a bit to figure out what to click on to
    get at the audio instruments, and then, again, it
    took me about another hour of puzzling and
    hair-pulling to get the sampler-player working. It
    would, indeed, be helpful, if there were Quickstart
    pages with LE, and better ways of showing how to do
    something. Obviously, I am not the first person to
    make the mistake that the MIDI instruments are not
    the same as the audio instruments, given Miehmann's
    post, and the link that you cited.
    nyways, the next step, I suppose, will be figuring a
    way to get my JV-1010 sound module working within LE,
    and then syncing LE to my VS.
    So many of these issues would be solved if Apple would CHANGE THE DEFAULT SONG as it is confusing for almost every new user and external MIDI devices are not the norm any more.
    What doesn't kill you makes you stronger, eh?
    So my doctor tells me.
    As for the book, I really do hate reading .pdf files
    off of a computer screen. Much prefer to curl up with
    a book, or take it into the 'reading room' when
    necessary.
    The Sitter book comes with song files to mess with, which really helps.
    I am sure that once I get my head around the concepts
    and the environment, I'll love this program.
    Fingers crossed.
    All the best,
    Paul.
    Intel Mini 1.66, PPC G4 450MP   Mac OS X (10.4.8)   RME FF400/ Hammerfall Multiface. Apple Certified Logic Pro Trainer

  • I need confirmation, please help me! (about adding new hdd on my ix4-300d)

    Hello,
    I buy recently a Lenovo ix4-300d, I have installed one hdd seagate 2To (ST2000VN000).
    I saved many documents on it..
    Today I want to install 2 others hdd WD 1To (WD10EZEX).
    After reboot a message tells me I need to erase all data on the news disks before I can use it, so I confirm, all seems ok.. After that a message appear on the left "2 disks unused".
    Now (step 3 page74 on the .pdf guide) I need to check the box "add drives to storage system" and click confirm to activate the news disks, so I do, but I have this message:
    "Vous devez supprimer les données existantes pour pouvoir modifier la configuration du disque.
    Cochez cette case pour continuer."
    (in english "You must erase existing data for change the disk configuration" or something like that)
     I don't want to loose all the data on my first hdd already in use.. ..and the 2 others news disks are empty.
    So, there is my question:
    if I check the box and click continue what "existing data" will be erase??
    existing data on all hdd?? Or just on the new one??
    nb: Sorry for "my english" but there is no french section in the forum, and the assistance don't answer me by email, and on the phone there is an answerphone tells me "for help if you don't have the error number code, you must go on the forum, bye.."  .. ..  I hope my question is understandable. 
    Thanks 

    Hello tictictac
    Sorry that you experienced data loss, however it was preventable if a backup had been made as recommended.   
    From the screen shot you sent it looks like the drives were already added to the existing array after the first drive overwrite request.  With the array being made up of mixed disk models and none of the disks showing any green stipes indicating overwrite selection,  I can not say for certain what caused all the disks to be wiped.  I suspect that is was taken as a RAID change and all disks were wiped from there. 
    For future reference please check the device support page to see the guides, FAQ's, and download the full user manual( in French here ) and check with LenovoEMC support in your region.  The Europe support region has several languages available to choose from including the France number +33 17048 0388.  The full list of Europe numbers can be found here.
    LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
    US and Canada: https://lenovo-na-en.custhelp.com/
    Latin America and Mexico: https://lenovo-la-es.custhelp.com/
    EU: https://lenovo-eu-en.custhelp.com/
    India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
    http://support.lenovoemc.com/

  • Please help me think about logic in abap program

    Hello every one.
    i have question.
    my selection of program is
    company code
    brand from:    to:
    fiscal year
    period from:   to:
    example.
    company code  0145
    brand from:AAA    to: ZZZ
    fiscal year 2011
    period from: 4  to: 6
    and desired output report is
    brand AAA        April   May  June
    sale              700     600  700
    COG               300     250  350
    Net sale          400     350  250
    brand BBB        April   May   June
    sale             1000    500   800
    COG               500    250   400
    Net sale          500    250   400
    sum of all brand   April  May  June
    sale              1700    1100  1500
    COG               800     500   750
    Net sale          900     600   650
    pleae help me to think about logic.
    now i just have idea that i have to
    loop at internal_table_brand.
    Moderator Message: Do not dump your spec in the forum.
    Edited by: Suhas Saha on Jun 16, 2011 4:16 PM

    Hi,
    This works now. You just need to create your methods and link them in with your case statement as flounder showed you.
    import java.util.Scanner;
    public class CarConfiguration
         public static void main(String[] args)
         int choise = Menu();
         processSelector(choise);
         private static int Menu()
              System.out.println("\nWELCOME TO CAR CONFIGURATION APPLICATION PROGRAM");
              System.out.println("======================================");
              System.out.println(" Enter _1_ to Chasis Type");
              System.out.println(" Enter _2_ to Engine Type");
              System.out.println(" Enter _3_ to Transmission");
              System.out.println(" Enter _4_ to Options ");
              System.out.println(" Enter _5_ to Finish ");
              System.out.println("======================================");
              System.out.print("Select Your Choise: ");
         Scanner input=new Scanner(System.in);
         int choise=input.nextInt();
         return(choise);
         private static void processSelector(int choise)
              switch(choise)
                   case 1: //enter mehtods here and for all other empty cases
                   break;
                   case 2:
                   break;
                   case 3:
                   break;
                   case 4:
                   break;
                   case 5:
                   break;
                   default:
                   System.out.println("Invalid selection");
                   break;
    }

  • Please help..question about sending pdf file from my ipad to another

    I have a pdf file in Kindle that shows up under documents. I am wanting to locate it and send it from my ipad to another..whether through email or even share through kindle. I contacted kindle and they said I have to contact apple with instructions to retreiving the pdf before I can send it. Anyone know how to do it. It shows up in docs on my kindle app but doesnt show up in itunes or on amazon. Help appreciated!!!!

    I copied this from another discussion - that ironically enough - James and I both participated in. The OP never responded to what I suggested, but I think that this may work.
    I think that the Kindle app uses file sharing so see if you can transfer the files to the computer via iTunes with file sharing.
    iOS: About File Sharing
    Then drag the pdf file from the file sharing window (or use the save to button) onto your desktop. Email it from there and you can even email it to yourself on the iPad and store it any other other PDF app that you may have.

Maybe you are looking for