PLease Help !Jsp Session expired when open Window with "_blank" atributte
PLease please Help me!
Hi ,
I have a problem
First , all my pages when load evaluate if session exists .
If not exists session
this page redirect other page (page_expired.jsp)
this works correctly ... but
when page01.jsp open page02.jsp from :
<form action='page02.jsp' target ="_self"> - >works correctly (load on the same page ..)
but when :
<form action='page02.jsp' target ="_blank"> -> this redirect page_expired.jsp
why this ??
Sometimes work and Sometimes not work...
but now it does not work
Excuse my english not is goog...
Greetings From Lima - Peru
Hi
This problem ocurred when testing on my server of testing(this is in my office) ,
but when test in the server machine of my house this work!!! great! ,
not appear session expired.!!
this theme of configuration ??
if is ths ?
what configure ?
Please Help Me .
I am using EASERVER 5.2 with JSP
Bye! Greetings From Lima Per�
Similar Messages
-
PLEASE HELP! Pages Quitting When Opening
Pages keeps quitting when I am trying to open a document I have been working on for 3 days! Not sure why. I can't get it open anymore. PLEASE HELP!
I am happy to provide the file if someone can help me.
I have updated my software and also validated my fonts (these are things that I have researched to see if it would work- but didn't)
I am really stressing as I need this document tomorrow
I was even saving the file 3 different names as backups and none will open, yet when I go to open any other files they opens fine.
It happened when Pages just quit unexpectly and then I couldn't re-open the file again. ARRRRHHHHH!
PLEASE HELP!Have you inserted lots of large (Mb) images?
Keep these as small in both dimensions and resolution as possible.
Also keep the amount of effects like shadows, reflections transparency, charts etc low in both the interests of good taste, legibility and speed.
Peter -
Please help, my iMac crashed when i open safari and my screen was blinking, then blackout and force to restart. Why is this happening? This is the crash report from my iMac.
Anonymous UUID: 0CC51978-99A7-1665-7EFF-A04BF2E05D6E
Sun Aug 3 20:45:04 2014
panic(cpu 0 caller 0xffffff80100dc24e): Kernel trap at 0xffffff801005248e, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x00007fff73cf3638, CR3: 0x000000000952f04e, CR4: 0x00000000000606e0
RAX: 0xffb9b9b9ffbbbbbb, RBX: 0xffffff801c66d3c0, RCX: 0x0000000000000030, RDX: 0xffffff801c66d418
RSP: 0xffffff80abb23c80, RBP: 0xffffff80abb23cd0, RSI: 0x0000000000000001, RDI: 0xffffff801c66d3c0
R8: 0x0000000000000001, R9: 0xffffff8010601910, R10: 0x00000000000003ff, R11: 0xffffffffffffffff
R12: 0x0000000000000000, R13: 0xffffff801cff60d8, R14: 0xffffff801c9fefd8, R15: 0x0000000000000000
RFL: 0x0000000000010287, RIP: 0xffffff801005248e, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00007fff73cf3638, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8084698c50 : 0xffffff8010022f79
0xffffff8084698cd0 : 0xffffff80100dc24e
0xffffff8084698ea0 : 0xffffff80100f3746
0xffffff8084698ec0 : 0xffffff801005248e
0xffffff80abb23cd0 : 0xffffff8010051dc9
0xffffff80abb23dd0 : 0xffffff7f909ef726
0xffffff80abb23e50 : 0xffffff7f909ef15c
0xffffff80abb23ed0 : 0xffffff7f909eee0b
0xffffff80abb23f20 : 0xffffff80104353b5
0xffffff80abb23f50 : 0xffffff8010440a33
0xffffff80abb23fb0 : 0xffffff80100f3f46
Kernel Extensions in backtrace:
com.apple.kec.pthread(1.0)[882075E6-12C4-3225-8750-928715183739]@0xffffff7f909e a000->0xffffff7f909f4fff
BSD process name corresponding to current thread: ReportCrash
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide: 0x000000000fe00000
Kernel text base: 0xffffff8010000000
System model name: iMac12,2 (Mac-942B59F58194171B)Both Memory Clean and Clean My Mac could have cause the damage which triggered the kp.
I would back up your Mac, erase and reinstall. Then Migrate your user data from the backup.
Uninstalling Tuxera is a troubleshooting process. You don't have to keep it uinstalled, just long enough to test to see if it is causing the problems.
However, if it doesn't happen regularly, it would be hard to determine if it was the cause. And, as I mentioned, I don't think it would be the cause. -
Please help, I am trying to open a GIF file and I am told it may be damaged or use a file format that preview does not recognize. Is there another path I can take to be successful? Many Thanks John
Please log out or restart the computer and try again.
-
i am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??
You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.
-
Hi can someone please help, my imac crashed, when i try to start it up, it just beeps loudly 3 times, then there is a pause before it beeps 3 more times, this just continues to happen, any sugestions? please help
allanpar wrote:
i am having to use my laptop to post this question, missing my imac so much, its just not the same using this slow windows laptop.
Then maybe it's time to buy a new Windows notebook.
The RAM has either gone bad or somehow become unseated. Also there is the chance that the RAM slots have failed. -
Please help! Itunes fails to open on my macbook pro. I have removed itunes and reinstalled it and it still will not work!
Try removing the Genius database. In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.
-
everytime i try to download itunes it says rolling back action and error . i dont know what to do please help . P.S. i have windows 8
Hello there Unicornbarf534,
Thank you for using Apple Support Communities.
It sounds like you are unable to successfully install iTunes. I recommend the troubleshooting instructions in this article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Here is a general outline of where the troubleshooting will take you:
General installation troubleshooting
1. Empty your Temp directory and restart
2. Completely remove iTunes and related components
3. Install the latest version of iTunes
Additional troubleshooting
After performing each of the steps below, you will need to completely remove iTunes and related components and then install iTunes again to determine whether the issue is resolved.
1. Make sure you have administrator account access
2. Make sure your folder names don't contain strange characters
3. Get the latest Windows updates
4. Disable other conflicting software
Additional Information
If you only need to install QuickTime, or if iTunes installs but QuickTime installation did not complete
Try downloading and installing the standalone version of QuickTime from http://www.apple.com/quicktime/download/. Be sure you download the version that does not include iTunes.
If the steps outlined in this article don't help, you may be able to find a solution to your issue by searching the Microsoft support website.
All the best,
Sterling -
I purchased as a Download Lightroom 5.5, My pc got a virus. I saved Lightroom on ext. drive. I am trying to reload onto pc BUT it's asking me for a serial number..I cannot find receipt. Please help. I registered when I downloaded purchase.
Find your serial number quickly
You might want to develop a more secure system of saving your serial numbers and other critical information. -
Please help. I can't open pdf comparables report from MLS Realist website.
Please help. I can't open pdf comparables reporT from MLS Realist website. Thank you!
I have this problem too and no one seems to be able to figure out what should be done. Feel like not using iPad any more.
-
Please help, my music would not open after syncing to computer.
Please help, my music would not open after syncing to computer.
Try quitting the music app completely and restart your iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that didn't help - reboot your iPad. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If that doesn't work, there may be a corrupt song in your Music app that you have to find and remove. -
Emergency! Please Help. I have an iPhone 4 with all my pictures from the vacation on it and I plugged into my computer and it sync'ed to my ipod. all of my pictures are gone. How do I get my pictures back?
If all you did was sync your phone, and if you haven't synced again since this happened, you can restore your phone from the backup that was created at the beginning of the sync process (camera roll photos are included in the backup). If you have synced again since this happened this backup has already been overwritten and your photos are lost. Also, if you restored your phone from the backup of your iPod, rather than just synced, then your photos are lost too.
If you have an intact backup that contains these photos, do the following:
Without connecting your phone, open iTunes on your computer and go to Preferences. On the Devices tab check "Prevent...from syncing automatically".
Connect your phone to your computer, right-click on the name of your phone when it appears in iTunes on the left sidebar and select Restore from Backup, choose your most recent backup to restore from.
When complete, you can go back to iTunes>Preferences>Devices and re-enable automatic syncing. -
Adobe Bridge CC crashes when opening file with Photoshop CC or Camera RAW!
Adobe Bridge CC crashes when opening file with Photoshop CC or Camera RAW!
- Tried to Reset the preference with CTRL + Click.
- It's just new clean install didn't do anything with it yet.
- Windows 8.
Any help?Just that one project, or any project? Can you create new projects?
-
Dreamweaver very slow when opening files with external links
Is there any way to fix Dreamweaver CS5 (Windows 7, 64bit) when opening files with external references?
For example, I have a very simple CSS file, and toward the top the file has a line that says:
@import url("https://fonts.googleapis.com/css?family=Ubuntu:500,700");
This causes the file to take around 20 seconds to open in DW. If I comment out the line or remove it, the file opens almost instantly. This behaviour is also present in files that contain an SSI.
DW often crashes before being able to open the file and I need to restart the app.
Can I disable DW from attempting to load the references?? It's obviously what is causing the issue IMO and would love to make DW workable again!"Enable Related Files" isn't the fix for this issue. It's slightly different - I wanted to still load related files, but only the ones local to the file I was editing.
The fix was to use DW's Resolve To IP Address feature. It required adding a registry value - it fixed the issue straight away
This Adobe support doc helped: http://kb2.adobe.com/cps/887/cpsid_88742.html -
Please Help :( iMac 20" refuses to boot up with anymore than 1gb ram?
Please Help iMac 20" refuses to boot up with anymore than 1gb ram? It was fine 4 days ago and had been working with a 1gb stick in one slot and a 2gb stick, which had replaced the orignal 1gb stick that I got it with, in the other and it had shown 3gb of ram and was working just fine with that since November? It went to sleep briefly 4 days ago while I was waiting on a customer and I came back to try to wake it up and it never would forcing me to hard boot it. When I did that it would only go to a black screen with a solid white light on the power indicator. Over and over again and same thing. I read and tried every suggestion I could possibly find in this and a few other mac forums to no avail.
I finally after reading about RAM issues etc. I decided to power off and take out the ram sticks and try them one at a time in each slot. So I took out the 2gb stick and did the SMC reset and it would boot up and work just fine with the 1 gb of ram. So then I went through the same process with the 2gb stick and it would not boot up only go to a black screen with white solid light again (NOT flashing). So then I tried the other original 1gb I had replaced with the 2gb and it worked just find like the other 1gb. So then I tried just 1gb stick in the other ram slot (back facing one) and with just the 1gb strip it booted up and worked fine. Tried it with the other 1gb stick and once again that one too worked just fine. So I determined it wasn't the slot itself I thought? I then tried the 2gb in the back slot and it would not boot only go to the black screen white solid light deal like before. So I thought well ok it's obviously the 2gb ram must have somehow went bad (even though I have only had it since November) and I thought well I will just use the (2) 1gb sticks in each slot and then that will at least give me 2gb because only 1gb really ***** LOL. So I proceeded to go through the same shut down process installed both sticks (I always push them to I feel them click and my fingers have a nice indention on them) reset the SMC and turned the power one and.... It would only go to the black screen with white solid light on power indicator???? I went through the same above process at least 3 times and again today a few times and I can't figure it out and I tried to search and search and I couldn't find anything like what I am experiencing.....What happened? Please help this slow Imac is killing me. It will work with 1gb ram only nothing more? Here are the specifics of my Imac.
It is a 20" Late 2006 Intel Core 2 Duo 2.16 ATI Radeon X1600 256 MB graphics card and Ram with now only 1gb (did have 3gb) and I am running OSX Lion 10.7.5
When I go to system report and go under memory it shows this:
BANK 0/DIMM0:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0xCE00000000000000
Part Number: 0x4D342037305432393533435A332D43453620
BANK 1/DIMM1:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
Any help I can get would really be appreciated. Thanks in advance
ALSO...Here is also a pic of the system log right before it happened. It even changed the date to 07/2014????
I have some more if needed???????????????
<Personal Information Edited by Host>The Memtest just completed and came back like this? It only test the single 1gb chip because anything more in this computer it won't go past the black screen with solid white power light.
Memtest version 4.22 (64-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004-2008 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
NOTE: No command-line arguments have been specified
Using defaults: Test all available memory, one test pass, no logfile
Mac OS X 10.7.5 (11G63) running in multiuser mode
Memory Page Size: 4096
System has 2 Intel core(s) with SSE
Requested memory: 250MB (263086080 bytes)
Available memory: 250MB (263086080 bytes)
Allocated memory: 250MB (263086080 bytes) at local address 0x0000000101000000
Attempting memory lock... locked successfully
Partitioning memory into 2 comparison buffers...
Buffer A: 125MB (131543040 bytes) starts at local address 0x0000000101000000
Buffer B: 125MB (131543040 bytes) starts at local address 0x0000000108d73000
Running 1 test sequence... (CTRL-C to quit)
Test sequence 1 of 1:
Running tests on full 250MB region...
Stuck Address : ok
Linear PRN : ok
Running comparison tests using 125MB buffers...
Random Value : ok
Compare XOR : ok
Compare SUB : ok
Compare MUL : ok
Compare DIV : ok
Compare OR : ok
Compare AND : ok
Sequential Increment: ok
Solid Bits : ok
Block Sequential : ok
Checkerboard : ok
Bit Spread : ok
Bit Flip : ok
Walking Ones : ok
Walking Zeroes : ok
All tests passed! Execution time: 362 seconds.
logout
[Process completed]
Seems Okay I guess?
Maybe you are looking for
-
Adapter specific message attributes in ABAP proxy
Dear all, i have a short question. I have a file to ABAP server proxy scenario. When picking up the file i write communication data from the adapter in the message header using dynamic configuration and route the message to a abap proxy. My question
-
Hello All, My scenario is SAP(IDOC) - >XI-->SAP(RFC synchronous)--> Webservice(synchronous) using BPM and Scenario running successfully. But my new approach is Source SAP(IDOC) expects the acknowledgement , If BPM process is success till step and af
-
Summary :- A service order was created with an operations.The complete confirmation was done and 3 operations were confirmed. 1st and 2nd operation have same activity type and 3rd has different activity type. A document was created through DIP profi
-
How can I pass parameter from report to form?
Hi :) Now I try to build conference room like this by using form and report. And i design that when users click at group report then i'll show page that contain questions report and add question form. And question form and report must receive the sam
-
3D sdo_util.reverse_linestring
Hello, Does anyone know how is it possible to reverse a non-LRS 3D geometry (SDO_GTYPE = 3002)? The User Guide (for 10g and 11g) says that's only possible for non-LRS 2D geometries (SDO_GTYPE = 2002)... Thanks in advance.