Please, Help!... K7n2 Delta L And Temp...

well, i´ve a K7N2 DELTA L and noticed that the processor temp., since it began to work, two days ago, is around 47 ~ 51°C in idle mode.... and when i play any game, just like Call of Duty, or RTCW Enemy Territory, it stays around 56 ~ 62°C... is it okay or too hot... I see it in PC ALERT 4....
Please, help!

I get the exact same temperatures, 60'C max load though. I don't see it as a problem since I live in Greece and right now the temperature outside is a good 40'C ! During the winter the temps (cpu, case and outside ) drop a lot (don't know how much since I only built my system about a month ago).
For me, under these circumstances, the best cooling option if I want to further drop my temps, is turn on the airconditioner in my room !
Jorge

Similar Messages

  • Please help - K7N2 delta-L upgrade compatibility?

    Hello there,
    Having perused the forms for a while in research I know my appeal will not fall on deaf ears. I'm about to buy a new mobo, CPU, vid card and RAM and would be eternally grateful for an OK as regards memory issues etc.
    I'd like:
    MSI K7N2- Delta L
    Duron 1.6 GHz
    Geforce4 MMX 400 64MB
    256 Crucial PC3200
    But I've heard the mobo is picky about both the memory and Duron CPUs. Would getting the latest driver solve the CPU problem and would this RAM work? I'm a newbie but would like to get into overclocking eventually. With this in mind, what should I look for in RAM? CL? I will drop in an XP 2500+ eventually and another stick of RAM for the dual channel goodness!
    Many thanks.

    I get the exact same temperatures, 60'C max load though. I don't see it as a problem since I live in Greece and right now the temperature outside is a good 40'C ! During the winter the temps (cpu, case and outside ) drop a lot (don't know how much since I only built my system about a month ago).
    For me, under these circumstances, the best cooling option if I want to further drop my temps, is turn on the airconditioner in my room !
    Jorge

  • K7n2 delta L and sempron 2800 troubleshooting

    I have put an sempron 2800 on my mothercard msi k7n2 delta L
    and my computer tell me that is an athlon xp 1200 +
    My bios is update i have the v5.8 and i have put it in 166mhz
    My memory its an kingston pc3200
    I don't understand can you help me.
    My computer run normaly but it don't recognize the real cpu

    Same problem!!!, i already check the j11 jumper and the j10, theyre ok, also i reset the bios
    Same problem!!!, i already check the j11 jumper and the j10, theyre ok, also i reset the bios
    this is my configuration
    AMD sempron 2400
    2 256 kingston 3200 400mhz
    MSI nvidia 5700 256MB
    Maxtor 80GB
    but the problem is with the cpu. it says that is an athlon XP 1000!!!, unbelieveable!!!,
    i already try to reset the jumper more that 4 times and nothing same result, and i already update the Bios yo 5.80, something else that i need to try? or do i need to do somethign specific?, please help me out here!!

  • [Help]K7N2 Delta-L

    I have a real problem and dunno what wrong or how to fix....
    I just bought an MSI Motherboard for AMD Processors Model K7N2 Delta-L Retail
    Athlon(tm) XP 2400+ with 266FSB
    DDR PC2100 512MB
    350Watts power supply
    PNY 5200 Ultra FX video card 128MB
    Soudblaster Audigy 2
    Problem come, when turn on the power, it on for few second then it off.... and can't turn it on again, unless I switch it off and on with power supply.  All items are brand new. Bought from retail store.
    Someone please help.... wat did I do wrong.... thnx ..... first time build a pc....

    Quote
    Originally posted by [T-A]_Super_10
    Set your jumpers to safe mode and clear cmos and try to boot.  When you switch PSU off and back on can you boot to OS? To bios? or just all the fans spin lights come on but nothing?  What does the D-Led say?
    well, I did as u instruct... but still ..... power on, just couple sec, then it automatic off... so quickly I don't even know wat D-Led is... however, when I take out the cpu and power it on... it's staying there. however I can't turn it on switch unless I switch off the PSU.... GZZZZZZZZ I'm going crazy.... I did using MSI KT4 Ultra-SR and it has the same problem so, i thought my MOBO damage, then I order new MSI K7N2 Delta-L and now, still same problem. I did exchange twice of CPU b/c i thought it damage too, but it not CPU.....
    I recheck and recheck the installation, nothing change.... Man, I never thought it so hard like it now.... Someone help please....

  • NEED HELP - K7N2 Delta ILSR

    I really need help. I recently bought my new moboard the K7N2 Delta ILSR and with it a GeForce FX 5600 256DDR, 512 DDD Ram PC3200, an 80Gb Seagate SATA HD, andi have a 2800+ AMD Athlon Xp Barton Core Cpu. The problem i get is that when i try to install Windows XP it says it cant find any hard drives. I saw the other thread that was like this but that one had about RAID so i thought i would ask again. I even tried it with Windows 98 which finds my hard drive and even installed once but after that i tried to upgrade to Windows Xp which didnt work, overwrited some of my Windows 98 files and so that didnt work either and when i try to install it again it gives me errors. PLS help im desperate to get my lan workin with my other PC. I havent changed any options in the bios and i dont know if i have to change anything to make sata work. I dont have a floppy disk either for the hd. I found it in the array thigy as well.  

    Windows will not find a SATA drive you have to tell it you have one bios will only find IDE drives.
    you must hit ctrl F when the screen comes up during boot and creat an array just follow the on screen promps.
    If you bought a OEM board and don't have the SATA Promise disk download it from MSI and a Manual too.
    Either a Raid 0 or Raid 1.
    It looks like you have only one drive so just tell it that and the array will work.
    Than go to your Bois and set Bois to boot from CD first SCSI secound.
    Now you can load your OS. When your OS starts to load it will flash a line across bottom of screen asking if you have SCSI hit F6 do so. The OS will keep loading but when its done it will ask for you 3.5 promise disk. Put it in and load the Fast Track 376 program.
    When you OS is finished loading it will again ask for this disk as the first time it just loads the drivers to memory the secound time to your HDD.
    Good Luck it a little confussing the first time as the programers think there talking to techs not people so use terms that sometimes don't make sense.

  • Jumper Settings for K7N2 Delta LISR and Athlon 3200 FSB400

    Hello Everyone,
    (I think I sent this to Raven By E-Mail but I'm not sure, I'm still new to this)
    Having problems understanding jumper settings.
    I cheched out the forum and the motherboard users guide to see which way the jumpers are set for my Board K7N2 LISR + Athlon 3200+ 400FSB.
    In the user guide it say's:-
    FSB Mode Jumper: J10
    This jumper allows you to set the CPU FSB mode, (It then shows two diagrams of Jumper 10) - first with pins 1 and 2 jumpered "user mode default 133Mhz" and the secound shows pins 2 and 3 jumpered "safe mode 100Mhz".
    What has settings 133Mhz or 100Mhz got to do with a 400 FSB??????  
    CPU FSB Frequency Jumper: J11
    This jumper is used to specify the CPU FSB frequency. (again it shows two Diagrams) first: Leave the jumper short connected if a 133/166Mhz FSB is installed.
    Secound:If the CPU supports 100Mhz FSB, leave the jumper open connected.
    To use a 200Mhz FSB CPU, set the jumper short connected and enter BIOS setup Utility to adjust the CPU FSB Clock Frequency.
    Again what has 133/166Mhz or 100Mhz got to do with a 400 FSB???????
    For my K7N2 Delta LISR and Athlon Barton 3200+ 400 FSB, what Would I set J10 to:- (Jumpered Pins 1 and 2,= 133Mhz) or (Jumpered 2 and 3,= 100Mhz).
    Also what would I set J11 to:- (Jumper pins Open = 100Mhz) or (Jumper short 133/166Mhz). Hope someone can help!!!!!!!!!
    It would be nice if the User's Guide had a (If .... Then..... in it)
    If CPU = Athlon 2800+ 333 FSB, Then J10 is jumpered pins 1 and 2,
    If CPU = Athlon.... etc etc.... or even a couple of examples
    Sorry this is so long, but I just need to tell someone, Thanks.

    1 insafe mode it will boot at 100 fsb regardless of what you set in the bios
     in user it will boot by what it sees the cpu as or what you set it to in the bios
     just leave it in user
     if you o/c and it will not boot shut down put it in safe
     then lower the o/c once it boots
     again shut down and put it back in user
    2 just leave it shorted
     only alter it if you used a 100 fsb cpu

  • I forgot my icloud account and my email how can i recover it please help me icloud maker and icloud password and username holder

    i forgot my icloud account and my email how can i recover it please help me icloud maker and icloud password and username holder

    If you don't know your ID, you can try to find it as explained here: http://support.apple.com/kb/HT5625.  Then you can reset the password as explained here: http://support.apple.com/kb/PH2617.  Of course, you can only do this if it's your ID.

  • Hi there, can anyone please help? Download itunes and it says The Itunes library .itl file is locked, or on a locked disk or you do not have write permission for this file.

    Hi there, can anyone please help? Download itunes and it says The Itunes library .itl file is locked, or on a locked disk or you do not have write permission for this file.

    Holding down the shift key while iTunes is opening. That will bring up the 'choose iTunes library' dialog. Select 'Choose LIbrary' from the choices and navigate to your music folder and iTunes music folder.
    Or refer to this article:
    iTunes for Windows XP: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
    http://support.apple.com/kb/HT1866

  • Please Help me in Labview and MS Access Database Connective

    Please Help me in LabVIEW and MS Access Database Connective through an example . I am new to LabVIEW .I need simple example that take a data from a table and display it on front panel .
    thanks in advance .

    duplicate post

  • My macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does

    my macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does not even let me turn it on

    Have you attempted to reset the SMC? That would be the first step. Hold the left control, option, shift key and the power button for about 5 seconds and release. Then try to reboot. Might as well reset the PRAM as well. Hold command, option, P, R on start up until the machine restarts. If that doesnt' have any affect we'll have to dig deeper into a potential hardware failure.
    If this method doesn't work, check the webcam that will tell the problem is on the iSight & WiFi cable. If your webcam is ok, then it'll be the WiFi card problem. Hope it can help ;-)
    - xia_us9

  • I am having a problem converting word onto PDF . PDF into word.Please help .I am signed and paid to Feb 2015

    Can someone advise me why I am having this problem

    Always in the past .I have my Word Document on screen and then I go to 
    Publish and it atomatically PDF the doc.
    The same if I have a PDF to convert to word. I have the PDF on screen and 
    to the right of my screen it will say Convert .I press on convert it
    converts to  word
    In a message dated 12/17/2014 10:01:32 A.M. Eastern Standard Time, 
    [email protected] writes:
    I  am having a problem converting word onto PDF . PDF into word.Please help
    .I am signed and paid to Feb 2015
    created by florencejohn (https://forums.adobe.com/people/florencejohn) 
    in  Adobe Acrobat.com Services - View the full  discussion
    (https://forums.adobe.com/message/7023171#7023171)

  • Dear Apple,please help me.the glitch and lags on games made me sad beause i am too love with my 4s. Why iOS 7 really made me sad...please help me.im beg for you.

    Dear Apple,please help me.the glitch and lags on games made me sad beause i am too love with my 4s. Why iOS 7 really made me sad...please help me.im beg for you.

    www.apple.com/feedback/iphone.html
    No one from Apple is listening on these forums.

  • ITune message is asking iPhone restore while I am trying to transfer pictures and video from the iPhone to iTune. Before that, software update is suggested. The display on iPhone is stacked to iTunes connection sign. Please help to save pictures and let i

    While trying to import pictures from iPhone to iTunes, iTunes request to make software update and then  to restore iPhone. I have cancelled the restore to rpotect pictures. The pictures have not been imported yet, but the iPhone display freezed at ITune connection page. Please help me save pictures and use the iPhone as usual. Restarting of the phone did not work so far.
    Ringomon 

    If the device is in recovery mode there is no date on the device to salvage.
    Restore the device.

  • K7N2 Delta ILSR and XP2500+ - strange overclocking problem

    Relevant configuration data:
    - K7N2 Delta ILSR (with 7.6 BIOS version)
    - Barton 2500+ (AQXEA)
    - Arctic Silver 3 thermal compound
    - GlobalWin CAK 38 (7000 rpm DELTA, all copper)
    - 2x512 MB Corsair XMS cmx512 3200c2 (it should run 6-3-3-2 at 200MHz on AMD systems according to older documents, and on 6-3-3-2.5 at 200MHz  on AMD systems according to newer documents)
    - PSU Enermax EG465P-VE (430W)
    - Gigabyte ATI Radeon 9800Pro 128MB
    - Battlefield 1942 game  
    I have 2 seperate problems:
    1. When I try to set my proc on 13x166 (Barton XP3000+) BIOS won't recognise that settings and it gives me real-clock rate of 833MHz (and no name, just "Athlon XP"). Just a note, when I set proc to be XP2600 or XP2800, everything is great in BIOS and in real conditions (Windows, Battlefield). I had 7.4 version of BIOS and I tried with new 7.6 version and nothing has changed (as I suspected). Can someone help me about this ?
    2. Second problem is a bit more serious.
    I'm having problems setting my proc to work with 100% stability on 200MHz FSB speed.
    This is what's going on:
    - Behaviour in Windows is pretty much good (no random restarts).
    - Sometimes (on rare occasions) blues screen appears when I'm in windows or some program. Last time when it appeared it said something about "memory managment". I tried to lower memory settings but nothing seemed to be better.
    - If I try to freshly install windows on 200 MHz FSB in 98% of the cases installation will be abrupted (blue screen or resets) or it won't even start to install.
    - What's bothering me the most is this: Battlefield 1942 is crashing on regular basis. Sometimes it can hold for 5 minutes, sometimes 20 minutes, sometimes half an hour. But on certain moment, puff, and I'm out in Windows. Not a computer restart, just it throws me on desktop.
    I've been checking the temperature on regular basis when I'm playing. It is always low.
    I've tried to raise core voltage all the way to 1.8v, but same thing happens.
    I've tried to lower memory settings, but I get same BF crashing.
    I don't know what else to do or what other component to acuse for instability.  
    Can somebody please help me ?
    Thank you in advance !

    Quote
    Originally posted by ellswt
    On the newer 2500+'s the multiplier is locked, this could be your problem
    Nope, because I am changing multiplyers without probs. The only multiplyer that doesn't work is 13x.
    Quote
    ...loosen up your memory timings to add stability, and give it a try again at the 200 mhz fsb without changing the multiplier.
    I drove the memory according to the Corsair's specs, and I drove it on lower settings also. No change.
    Quote
    also you may wish to go up to 2.7 volts for your ram, and 1.7 volts on your processor to add stability, remember sometimes you have to go up gradually a step or two at a time and keep it there for a day or two before you reach your top OC.
    I might try upping ram voltage but that doesn't sound good, because it IS DDR 400 memory (an excellent one too !).
    It's not like I'm trying to drive it over 200MHz. 200MHz is this memory's normal frequency.
     Quote
    Newest video driver from ATI may help with the stability on your gaming.
    Already have newest drivers.
    Anyway, thanks for the tips !  

  • MSI K7N2 Delta ILSR and Serial ATA Drive

    I've got a very strange problem....
    Yesterday i have installed my new motherboard (MSI K7N2 Delta ILSR) but i have a problem with the SATA feature.
    I've got two drives : one 40GB ATA (Western Digital) and one 160GB SATA also from Western Digital.
    My SATA drive is recognized by the FastTrak BIOS (v2) but i'm unable to reinstall Windows XP Professional (with SP2 Slipstreamed) because Windows Setup didn't recognize the SATA disk. I have loaded the Promise Serial ATA Drivers at the begin of the installation (F6)...
    I have also tried 2 different versions of the Promise SATA Drivers; the one that cames with my motherboard CD, and the most recent from the MSI website. But with both drivers the same result. How can i get my Serial ATA Harddisk get work with this motherboard?
    Any help will be appreciated. 
    Thanks,
    Computerfreakje.
    PS : My specifications are the following:
    MSI K7N2 Delta ILSR (Rev. 7.4)
    AMD Athlon XP 2500+
    2x 256MB Kingston PC3200 Dual Channel
    ATI Radeon 9800 Pro 128mb (R360)
    Western Digital 40GB ATA
    Western Digital 160GB SATA

    Thanks for your reply Richard,
    My motherboard didn't came with a floppy (I have bought an bulk version..) I have created a SATA floppy by myself. (I have got the drivers from the motherboard cd..) These drivers are also good, right?
    Which type of RAID Array should i create? Because i have only one SATA drive.....
    I think the "auto" feature is the easiest way?
    Thanks.
    Computerfreakje.

Maybe you are looking for