Please help, k8t neo2 FIR problem when flashed

Hi, I had the system running fine untill I tried to flash it to 9.2. I wanted flashed it because I wanted to run my dual channel ram into it.(512 x 2)
When it deleted the old Bios I HAD A POWER CUT and the new bios wasnt installed.
Now every time I turn on my PC there nothing on the screen, no post.
I have tried using just one ram DIMM now, still the same.
Unpluged the HD, dvd drive and case fans still no sign of working.
Tried pressing insert key.
Tried without any ram, the motherboard doesnt even beep!
The 4 LED light on the D-bracket shows red.
My system is;
3200 xp venice
msi k8t neo 2 FIR
512 x 2 dual channel GEIL ram @ 400mhz
160 IDE Maxtor HD
leadtak FX5900
Sony dvdrw
Thanks in advance

Danny,
A power cut during a BIOS flash is truly a dreadful event (kiss of death). You have already tried numerous corrective actions with no success. You did not mentioned in your post if you attempted resetting your BIOS by using the jumper on your motherboard. If you have not give it a try before going to what I think you will be faced with.
If above does not work and you live in Europe ot the UK goto this URL and investigate having them force flash your BIOS ROM or by a new one as suggested: https://forum-en.msi.com/index.php?topic=86809.msg621517#msg621517
If you live elsewhere it is likely more economical to buy a new motherboard as well as consider acquiring an APC if power is a problem at yourr location.
Good luck,

Similar Messages

Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

K8T Neo2 - SATA problem when installing XP pro SP2

hardware
MSI k8t neo 2 with athlon 3200+
2*512MB corsair and no name
ATI radeon 9200
HDD maxtor 200GB and HDD samsung 200GB
The mainboard offer 2 sata controller, but i can't success to install windows on,
1) If I use the promise fasttrack sata controller :
I boot from my xp installing CD, hit F6 and load the drivers from the floppy drivers, I choose where installing xp, and when he start to copy the data he ask again the ftsata2.sys load from the previous floppy disk drivers, and here he refuses to copy the file(but he is accessing to the floppy).
I'm stuck here because without this ftsata2.sys files he refuses to continue the process.
2) If I use the VIA sata raid driver :
first, he found only one HDD the maxtor.
I boot from my xp installing CD, hit F6 and load the drivers from the floppy drivers, but there the process stop because he cannot found the HDD.
PS: sorry for my English, I'm french speaker but not french, (Switzerland ) x)

Quote from: Hans on 06-January-07, 17:14:20
Yep, I agree.
But: what are you trying to set up? Are you trying some RAID with these drives? If so, it is preferable to use two disks that are the same size (you have that) but also the same make and model.
I'm just trying to install windows xp sp2. I don't use any raid settings.

MSI K8T Neo2 FIR, need help installing drivers

Hi there,
I need help with installing drivers. Here’s my setup:
CPU: AMD Athlon 64 3500+
Mainbord: MSI K8T Neo2 FIR (VIA K8T800Pro)
OS: Windows XP Professional, SP2 installed
ATI Radeon 9600 Pro
I updated per MSI Live Monitor, but when I run ‘dxdiag’, I says I have to update the ‘VIA standard host bridge’. I don’t know what this is or where it can be found. It could be I saved the updated drivers in the wrong file (F:\ Program Files\...) where F is my primary harddisk and the drivers should be saved in F:\Windows\ System 32.
Also, my hardware setup tells me there are two videocards 'installed': a Radeon 9600 Pro and a radeon 9600 Pro (secundary). Do I need to de-install the secundary one?
Here’s a piece of my most recent dxdiag:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
System Information
Time of this report: 5/22/2005, 10:22:20
Machine name: UIWDC2ARUPUS49X
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Language: Dutch (Regional Setting: Dutch)
System Manufacturer: MSI
System Model: MS-6702E
BIOS: Version 07.00T
Processor: AMD Athlon(tm) 64 Processor 3500+, MMX, 3DNow, ~2.2GHz
Memory: 1024MB RAM
Page File: 285MB used, 2687MB available
Windows Dir: F:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
DxDiag Notes
DirectX Files Tab: No problems found.
Display Tab 1: No problems found. DirectDraw test results: All tests were successful. Direct3D 7 test results: All tests were successful. Direct3D 8 test results: All tests were successful. Direct3D 9 test results: All tests were successful.
Sound Tab 1: No problems found.
Music Tab: DirectMusic test results: All tests were successful.
Input Tab: No problems found.
Network Tab: No problems found. DirectPlay test results: The tests were cancelled before completing.
DirectX Debug Levels
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: RADEON 9600 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: ATI RADEON 9600 Series AGP (0x4150)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4150&SUBSYS_000217EE&REV_00
Display Memory: 128.0 MB
Current Mode: 1280 x 1024 (16 bit) (60Hz)
Monitor: Plug en Play-monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6546 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 5/4/2005 04:28:54, 226816 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n.v.t.
Mini VDD: ati2mtag.sys
Mini VDD Date: 5/4/2005 04:28:34, 1133056 bytes
Device Identifier: {D7B71EE2-0210-11CF-CC6D-0820A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x4150
SubSys ID: 0x000217EE
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: All tests were successful.
D3D7 Test Result: All tests were successful.
D3D8 Test Result: All tests were successful.
D3D9 Test Result: All tests were successful.
Sound Devices
Description: Sound Blaster Live! 24-bit
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0007&SUBSYS_10061102&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: P17.sys
Driver Version: 5.12.0001.0314 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 6/4/2004 10:27:46, 840960 bytes
Other Files:
Driver Provider: Creative Technology Ltd.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 4000, 96000
Static/Strm HW Mix Bufs: 64, 63
Static/Strm HW 3D Bufs: 64, 63
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
Sound Capture Devices
Description: Sound Blaster Live! 24-bit
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: P17.sys
Driver Version: 5.12.0001.0314 (English)
Driver Attributes: Final Retail
Date and Size: 6/4/2004 10:27:46, 840960 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
DirectMusic
DLS Path: F:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Sound Blaster Live! 24-bit, Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI-mapper (emulatie), Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SoundFont Synth (emulatie), Hardware (Not Kernel Mode), Output, No DLS, Internal
Microsoft GS Wavetable SW Synth (emulatie), Hardware (Not Kernel Mode), Output, No DLS, Internal
Registry: OK
Test Result: All tests were successful.
DirectInput Devices
Device Name: Muis
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Toetsenbord
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
Registry: OK
USB Devices
+ USB-hoofdhub
| Vendor/Product ID: 0x1106, 0x3038
| Matching Device ID: usb\root_hub
| Lower Filters: vulfntrs
| Service: usbhub
| Driver: usbhub.sys, 8/3/2004 23:08:44, 57600 bytes
| Driver: usbd.sys, 9/7/2001 14:00:00, 4736 bytes
Gameport Devices
PS/2 Devices
+ Standaardtoetsenbord (101/102 toetsen) of Microsoft Natural PS/2-toetsenbord
| Matching Device ID: *pnp0303
| Service: i8042prt
| Driver: i8042prt.sys, 8/4/2004 00:55:30, 53760 bytes
| Driver: kbdclass.sys, 8/4/2004 00:57:18, 25216 bytes
|
+ Toestenbordstuurprogramma voor Terminal Server
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 01:03:48, 40840 bytes
| Driver: kbdclass.sys, 8/4/2004 00:57:18, 25216 bytes
|
+ HID-compliant Wheel Mouse
| Vendor/Product ID: 0x046D, 0xC03D
| Matching Device ID: hid\vid_046d&pid_c03d
| Upper Filters: LMouFlt2
| Lower Filters: LHidFlt2
| Service: mouhid
| Driver: mouhid.sys, 9/6/2001 19:04:40, 12288 bytes
| Driver: mouclass.sys, 8/4/2004 00:53:38, 23552 bytes
| Driver: LHidFlt2.Sys, 12/17/2003 09:50:00, 25505 bytes
| Driver: LMouFlt2.Sys, 12/17/2003 09:50:00, 70801 bytes
| Driver: Logi_MwX.Exe, 12/17/2003 09:50:00, 19968 bytes
|
+ Stuurprogramma voor muis van Terminal Server
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 01:03:48, 40840 bytes
| Driver: mouclass.sys, 8/4/2004 00:53:38, 23552 bytes
DirectPlay Service Providers
DirectPlay8 Modem Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 Serial Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 IPX Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 TCP/IP Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
Internet TCP/IP Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.2180)
IPX Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.2180)
Modem Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.2180)
Serial Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.2180)
DirectPlay Voice Wizard Tests: Full Duplex: Not run, Half Duplex: Not run, Mic: Not run
DirectPlay Test Result: The tests were cancelled before completing.
Registry: OK
DirectPlay Adapters
DirectPlay8 Serial Service Provider: COM1
DirectPlay8 TCP/IP Service Provider: LAN-verbinding 2 - IPv4 -
DirectPlay Voice Codecs
Voxware VR12 1.4kbit/s
Voxware SC06 6.4kbit/s
Voxware SC03 3.2kbit/s
MS-PCM 64 kbit/s
MS-ADPCM 32.8 kbit/s
Microsoft GSM 6.10 13 kbit/s
TrueSpeech(TM) 8.6 kbit/s
DirectPlay Lobbyable Apps
Disk & DVD/CD-ROM Drives
Drive: C:
Free Space: 65.4 GB
Total Space: 76.3 GB
File System: NTFS
Model: ST380011A
Drive: F:
Free Space: 56.7 GB
Total Space: 78.2 GB
File System: NTFS
Model: Maxtor 6Y080L0
Drive: D:
Model: LITE-ON COMBO SOHC-5232K
Driver: f:\windows\system32\drivers\cdrom.sys, 5.01.2600.2180 (Dutch), 8/3/2004 22:59:54, 49536 bytes
Drive: E:
Model: LG CD-ROM CRD-8521B
Driver: f:\windows\system32\drivers\cdrom.sys, 5.01.2600.2180 (Dutch), 8/3/2004 22:59:54, 49536 bytes
System Devices
Name: VIA CPU to AGP2.0/AGP3.0 Controller
Device ID: PCI\VEN_1106&DEV_B188&SUBSYS_00000000&REV_00\3&61AAA01&0&08
Driver: F:\WINDOWS\system32\DRIVERS\VIAAGP1.SYS, 5.01.0000.3442 (English), 7/2/2003 04:42:00, 27904 bytes
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_7282&SUBSYS_00000000&REV_00\3&61AAA01&0&07
Driver: n/a
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_4282&SUBSYS_00000000&REV_00\3&61AAA01&0&04
Driver: n/a
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_3282&SUBSYS_00000000&REV_00\3&61AAA01&0&03
Driver: n/a
Name: VIA Standard PCI to ISA Bridge
Device ID: PCI\VEN_1106&DEV_3227&SUBSYS_00000000&REV_00\3&61AAA01&0&88
Driver: F:\WINDOWS\system32\DRIVERS\isapnp.sys, 5.01.2600.0000 (Dutch), 9/6/2001 18:20:18, 36352 bytes
Name: VIA USB 2.0 Enhanced Host Controller
Device ID: PCI\VEN_1106&DEV_3104&SUBSYS_70201462&REV_86\3&61AAA01&0&84
Driver: F:\WINDOWS\system32\drivers\usbehci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 26624 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Driver: F:\WINDOWS\system32\hccoin.dll, 5.01.2600.2180 (English), 8/4/2004 01:03:12, 7168 bytes
Name: VIA OHCI Compliant IEEE 1394 Host Controller
Device ID: PCI\VEN_1106&DEV_3044&SUBSYS_702D1462&REV_46\3&61AAA01&0&70
Driver: F:\WINDOWS\system32\DRIVERS\ohci1394.sys, 5.01.2600.2180 (English), 8/3/2004 23:10:10, 61056 bytes
Driver: F:\WINDOWS\system32\DRIVERS\1394bus.sys, 5.01.2600.2180 (English), 8/3/2004 23:10:08, 53248 bytes
Driver: F:\WINDOWS\system32\DRIVERS\nic1394.sys, 5.01.2600.2180 (English), 8/3/2004 22:58:30, 61824 bytes
Driver: F:\WINDOWS\system32\DRIVERS\arp1394.sys, 5.01.2600.2180 (English), 8/3/2004 22:58:30, 60800 bytes
Driver: F:\WINDOWS\system32\DRIVERS\enum1394.sys, 5.01.2600.0000 (English), 8/17/2001 23:46:40, 6400 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&83
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&82
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&81
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&80
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_2282&SUBSYS_00000000&REV_00\3&61AAA01&0&02
Driver: n/a
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_1282&SUBSYS_00000000&REV_00\3&61AAA01&0&01
Driver: n/a
Name: VIA Bus Master IDE Controller
Device ID: PCI\VEN_1106&DEV_0571&SUBSYS_70201462&REV_06\3&61AAA01&0&78
Driver: F:\WINDOWS\system32\DRIVERS\viaide.sys, 1.00.0001.0001 (English), 8/3/2004 22:59:44, 5376 bytes
Driver: F:\WINDOWS\system32\DRIVERS\pciidex.sys, 5.01.2600.2180 (Dutch), 8/3/2004 22:59:42, 25088 bytes
Driver: F:\WINDOWS\system32\DRIVERS\atapi.sys, 5.01.2600.2180 (English), 8/3/2004 22:59:44, 95360 bytes
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_0282&SUBSYS_00000000&REV_00\3&61AAA01&0&00
Driver: n/a
Name: Sound Blaster Live! 24-bit
Device ID: PCI\VEN_1102&DEV_0007&SUBSYS_10061102&REV_00\3&61AAA01&0&30
Driver: F:\WINDOWS\system32\ksuser.dll, 5.03.2600.2180 (Dutch), 8/4/2004 01:03:14, 4096 bytes
Driver: F:\WINDOWS\system32\ksproxy.ax, 5.03.2600.2180 (Dutch), 8/4/2004 01:03:38, 130048 bytes
Driver: F:\WINDOWS\system32\drivers\ks.sys, 5.03.2600.2180 (Dutch), 8/3/2004 23:15:22, 140928 bytes
Driver: F:\WINDOWS\system32\drivers\drmk.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:00, 60288 bytes
Driver: F:\WINDOWS\system32\drivers\portcls.sys, 5.01.2600.2180 (English), 8/3/2004 23:15:50, 145792 bytes
Driver: F:\WINDOWS\system32\drivers\stream.sys, 5.03.2600.2180 (Dutch), 8/3/2004 23:08:04, 48640 bytes
Driver: F:\WINDOWS\system32\wdmaud.drv, 5.01.2600.2180 (English), 8/4/2004 01:03:40, 23552 bytes
Driver: F:\WINDOWS\system32\CtDvInst.dll, 0.00.0000.0008 (English), 7/25/2003 11:35:48, 131072 bytes
Driver: F:\WINDOWS\system32\drivers\ctoss2k.sys, 5.12.0001.0172 (English), 9/22/2003 02:47:38, 178672 bytes
Driver: F:\WINDOWS\system32\drivers\ctsfm2k.sys, 5.12.0001.0172 (English), 9/22/2003 02:48:06, 130192 bytes
Driver: F:\WINDOWS\system32\sfman32.dll, 5.12.0001.0130 (English), 8/17/2001 08:35:46, 36864 bytes
Driver: F:\WINDOWS\system32\sfms32.dll, 5.12.0001.0172 (English), 9/22/2003 02:51:52, 172032 bytes
Driver: F:\WINDOWS\system32\ct2mgm.sf2, 9/22/1999 09:18:00, 2167684 bytes
Driver: F:\WINDOWS\system32\P17res.dll, 5.12.0001.0308 (English), 3/29/2004 04:02:48, 136704 bytes
Driver: F:\WINDOWS\system32\P17.dll, 1.00.0001.0029 (English), 4/8/2004 04:37:40, 60928 bytes
Driver: F:\WINDOWS\system32\drivers\P17.sys, 5.12.0001.0314 (English), 6/4/2004 10:27:46, 840960 bytes
Driver: F:\WINDOWS\system32\drivers\Pfmodnt.sys, 3.00.0000.0003 (English), 3/5/2003 12:19:28, 15840 bytes
Driver: F:\WINDOWS\system32\A3d.dll, 80.00.0000.0003 (English), 4/11/2002 03:41:06, 65536 bytes
Driver: F:\WINDOWS\system32\P17CPI.dll, 1.00.0000.0002 (English), 10/2/2003 12:48:18, 53248 bytes
Name: Ethernet-controller
Device ID: PCI\VEN_10EC&DEV_8169&SUBSYS_702C1462&REV_10\3&61AAA01&0&58
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1103&SUBSYS_00000000&REV_00\3&61AAA01&0&C3
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1102&SUBSYS_00000000&REV_00\3&61AAA01&0&C2
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1101&SUBSYS_00000000&REV_00\3&61AAA01&0&C1
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1100&SUBSYS_00000000&REV_00\3&61AAA01&0&C0
Driver: n/a
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Help would be very much appriciated, thnx!

The two vis.cards issue is normal, it sees the primary output (VGA) as a device and the TV-out a separate device.
Go to device manager to see if there's any device on ur rig that doesn't have drivers.
Did u install the 4-in1 drivers, get the latest version from the MSI support site.
good luck.

With MSI K8T NEO2 FIR Mb (help)

Hi.
I need some help....!
My computer contains:
AMD64 3500+ (130nm, Newcastle) socket 939
MSI K8T NEO2 FIR Hovedkort for S939 K8T800PRO
Kingston PC3200 HyperX DDR 1024MB CL2 Non-ECC Ultra Low Latency (2-2-2-5-1)
Gainward GeForce 6800GT 256MB GS GDDR3 AGP, "Ultra/2400 Golden Sample"
9 X Western Digital HD's
2 X Nec dvd-burning-r
A Gainward psu. (delivers "+3,3=28a" "+5=45a" "+12=20a" and a total of 550W)
I think I have a power problem... because the "+12" has a rather low number for this kind of system... and the BIOS is showing me that the "+12" reading is -- 11,42V -- This is idle in BIOS... and I got the same reading in Win... (idle)
The first thing I thought of was to disable as many disk's/cd-drives as I was able to... the only thing I have left is C: BUT!! the bios and windows gives me the same reading of the "+12" 11,42V.
Both +3,3 and +5 are on the + side.
The main problem is when I ex starts a game or a benchmark prog... Like HL2,battlefield,War3,3dmarks,Prime95 + + + the pc shuts down, or the prog/game won't run properly.... Kind of irritating!!!
Do anybody have any experience with this kind of problem?!?!?! I need help!
I thought of buying the OCZ 520w psu.... Does it solve the problem?
http://www.ocztechnology.com/products/power_management/ocz_powerstream_power_supply
This psu should give me these specs:
520W:
+3.3V(28A)
+5V(40A)
+12V(33A)
Many Thanks for your help!!
regards.
Kris

Prime95 version 23.8.1 is my first choice, I run the torture test in blend mode because it uses lots of ram, very sensitive to errors. Pure math computataions and matched against known results.
I also use Hot Cpu tester Pro 4.2.2, they do have a free version as well it tests alot of different cpu instructions as well as memory simultaniously as well as doing a burn-in. Faster than Prime, nice when your overclocking since you can see what is failing sse instructions for example, then you can either up the cpu voltage or ram voltage depending on the test or back off the oc a bit.Used it alot with my old Barton 2500 rig.
I've seen a third program used on some of the overclocking sites Superpi. I believe, lol, been meaning to bookmark and try it myself. I imagine it's used to quickly detect memory errors as well as being a benchmark without stressing components.
This board isn't made for overclocking kind of useless without a working agp/pci lock. Sata corruption over 220 fsb so I've been content with using the first 2 programs to tweak my memory settings and test for stability.
Yeah I noticed that too when I set the DDR to 400 the bios will override the Cas being set to 2 and run it at 2.5 My board doesn't freeze when saving it though. I leave it set at 2.5 in the bios and use A64Tweaker to manually set the Cas to 2 in windows it works fine that way and is easily verified with cpuz or everest. Personally I don't trust using spd in the bios and prefer to manually set all the timing to the manufacturers recommended settings. *edit* I also forgot to mention to when you check your ram manufacturer's website to see if the sticks of ram are capably of Command Rate 1T(CR) some can't other can only if one stick is being used. You may need to set the Dram 1T timing to disable, sorry about that

Problem with my older K8T Neo2-Fir or my bios?

Hi there Friends
Can someone help me with a problem i got. I have installed this video card:
Sapphire Radeon X1950 Pro 512MB DDR3 / AGP / 2xDVI / TV-OUT
On this older motherboard: K8T Neo2-Fir [Gbe Lan;IEEE1394, SATA RAID] Socket 939.
Do I need a Bios upgrade because this board seams only supporting max 256mb of video memory. Doesn`t this motherboard and bios version supporting 512 mb?
What should I doing to be able to change my settings in bios to the correct size for the memory. From 256 to 512 mb
This is my bios: Amibios Bios 9.10
Someone help me with this problem

Quote from: Mr Freddy on 03-November-07, 04:39:19
Thats correct, and i want to setting the right memory size in bios, but i cant doing that in my bios. The maximum value i can choice is 256mb. Do you understand wath i mean? Why cant i change this settings to more than 256mb? Is this because this bios are not supporting more than 256mb? (sorry for my bad english)
"Thats correct, and i want to setting the right memory size in bios, but i cant doing that in my bios."
That do NOT setup VGA memory size...
"The maximum value i can choice is 256mb. Do you understand wath i mean? Why cant i change this settings to more than 256mb?"
because there no need to be more than 256...
"Is this because this bios are not supporting more than 256mb?"
that setting doesn't affect VGA memory size...(you can't change VGA memory size, its fixed...) for your VGA with 512MB memory you should apply 64MB for AGP aperture size.

Hello, i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

hello,
i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

I sloved this issue by resting my phone from settings>general>reset>reset all settings...the problem will be fixed

HT204088 Dear sirs, Could you please help me on my problem with my apple ID I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working, My account have 50$ and stil

Dear sirs,
Could you please help me on my problem with my apple ID
I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working,
My account have 50$ and still didn't buy anything

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100546)

HT1349 The nice man Joseph Shen helped me with my google problem on my iPhone and worked for 2 days and now not working again please help me solve this problem were I can retrieve my messages on the I phone when I am not at home on my wi Fi is the only t

The nice man Joseph Shen helped me with my google problem on my iPhone and worked for 2 days and now not working again please help me solve this problem were I can retrieve my messages on the I phone when I am not at home on my wi Fi is the only time it works correct. Bill. [email protected] 708 752 3667

http://lifehacker.com/5852948/what-to-do-if-youve-forgotten-your-iphones-passcod e

Details: i have 15 dollar but i cant by gem on clash of clan game when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction please help me to solve problem

Details:
i have 15 dollar but i cant by gem on clash of clan game
when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction
please help me to solve problem

رائد wrote:
please help me to solve problem
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I have 99 dollar but i cant by gem on clash of clan game when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction please help me to solve problem

i have 99 dollar but i cant by gem on clash of clan game when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction please help me to solve problem agen !!
halep me

If I were you, I would "Contact iTunes support to complete this transaction."
http://apple.com/emea/support/itunes/contact.html

K8t neo2-FIR lock ups

hey i'm posting for my friend who recently got a new setup for his computer
antec 400W power supply
3200+
k8t neo2-FIR
sapphire radeon 9600XT
512 meg major brand ram
2 80 gig harddrives
onboard sound/lan
i'm not too sure of the psu specs
the computer (with latest driver updates) has a tendency of locking up where the screen will just go black at random periods
no matter the situation and we will have to restart it (we tried in optimizeed bios settings and default)
the computer when i was there ran fine in video games except for the locking up part
i'm not sure what the problem is nor does my friend any help is appreciated

Run Memtest86 and find out which RAM models he uses. Likely as not it is going to be part of the issue. See if you can read the lable on that PSU as well and find out how many amps are on the 12v rail.

MSI K8T Neo2-FIR: No fan control since BIOS 3.3?

Hi!
First my system:
MSI K8T Neo2-FIR (BIOS 3.3)
Athlon64 3000+ Winchester (with Arctic Freezer 64)
Connect3D Radeon 9700 (Zalman Hetapipe)
2x512 MB MDT RAM CL2.5 PC3200 (DIMM1+3)
Terratec Cinergy TV400
PSU Chill Innovation CP-510A (Click for output ratings)
Since BIOS V3.3 Speedfan (V 4.20) is not able to reduce the rpm of the CPU-Fan (of course connected to CFAN1). Before flashing BIOS 3.2, it worked well (CPU

Quote from: Zipfelklatscher on 27-January-05, 16:10:52
Hi!
First my system:
MSI K8T Neo2-FIR (BIOS 3.3)
Athlon64 3000+ Winchester (with Arctic Freezer 64)
Connect3D Radeon 9700 (Zalman Hetapipe)
2x512 MB MDT RAM CL2.5 PC3200 (DIMM1+3)
Terratec Cinergy TV400
PSU Chill Innovation CP-510A (Click for output ratings)
Since BIOS V3.3 Speedfan (V 4.20) is not able to reduce the rpm of the CPU-Fan (of course connected to CFAN1). Before flashing BIOS 3.2, it worked well (CPU < 40°C = Fan spins with 60%). After flashing BIOS 3.3 (because it resolves the problem with USB legacy and WindowsXP), Speedfan (and Corecenter) do not reduce die fan power. If i stay a while in the BIOS, i can hear, how the fan runs lower and lower. But under windows the fan runs on full power.
I have this problem too.
I don't have ability to change speed fan for CPU, and then I have 60 degrees on full load.
When I setup in CoreCenter utility to user mode and fan to high speed, as if by miracle on cpu fan speed change from 1600 to 2400,
but now it's on 1600 again and setup in core center dont't make any change on speed fan.
Is it OK in bios 3.2 ? with setup speed on cpu ?

I can't click below the toolbar .half inch to 3inch from right to left. all words or letters are not working. please help to resolve this problem. thanks!

Everytime I open firefox, all words or letters below the toolbar half inch to 3 inch from right to left are not clickable(not working). but they are working or clickable on google crhome or internet explorer. please help to resolve this problem. thanks!

The '''''Yahoo! Toolbar''''' and the '''''Babylon''''' extension have been reported to cause that problem. They seem to invisibly extend downward over the top of the web page display area. Disable or uninstall those add-ons.
*See --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*See --> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
*See --> http://kb.mozillazine.org/Uninstalling_toolbars
*See --> https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

MSI K8T Neo2-FIR w/ AMD Athlon64 3000 (Venice)

I am looking at purchasing the MSI K8T Neo2-FIR with the AMD Athlon64 3000 (Venice). However, it appears that many have issues with this. I found a link to a MSI german forum that had a beta version of the newest bios but I have a few questions.
Would a german version work if i am living in canada (toronto)?
How can the bios be flashed if it doesnt recognize the cpu?
When will the new bios be released?

Quote from: Ui30 on 08-June-05, 16:36:37
The Venice core will be supported by the K8T neo2 shortly, I'm convinced about that, since Asus (I'm sorry to mention them) are supporting it already, with the same bios.
Even ECS published Venice-ready BIOS updates...
Quote
My advice: just wait a few weeks.
Yepp.
btw: MSI Korea published BIOS 9.14, see http://www.msi-korea.co.kr/program/support/support_dld_detail.php?part=1&serials=61
Michael

Please help, k8t neo2 FIR problem when flashed

Similar Messages

Maybe you are looking for