Please Help. Lightbox Gallery Widget will not work

When I put it into Dreamweaver and then go preview it in browser there are just a bunch of empty boxes where the images should be. The images actually show up in dreamweaver but not as a functioning widget, but the images will not show up when I preview them in browsers... any help will be appreciated.
Avery

So I think I figured it out... I guess it didnt transfer all the files needed when I brought it from the widget browser... so i downloaded it from adove exchange I think... and then I went to insert and went to the bottom to tcn widgets and then it worked....

Similar Messages

HT1766 please help my ipad min is not working on the scren it says iPad disabled connect to itunes

please help my ipad min is not working on the scren it says iPad disabled connect to itunes

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Is it still the case that the Muse CC Forms widget will not work properly unless you have Business Catalyst?

I am looking into options for our next office website redesign. We will definitely need a forms function. I downloaded the Muse CC free trial and went through all of the tutorials. The video on the forms (Contact Form) stated that the forms widget would not work or would not work properly if you do not have Business Catalyst. I'm hoping that has changed since the video was created.
Is this still true that you need to purchase the Business Catalyst product for Muse CC form widgets to work correcty???

Piruki have you tried utilizing the Previous version option within the Creative Cloud Desktop application? You can find additional details under the install Previous version section of CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

Please help me my phone will not do anything screen just blank was working 15min previous??

Please help me!!!!! My phone was working went to it 15min later and screen blank wont do anything tried turning it on, battery was not flat????

Try a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.

HELP!!!!...please help me...ipod not working

my uncle bought me an ipod as a gift for me couple of months ago..and for about 5 months, i was able to upadte songs into my ipod using the MAC OSX...but now, i got a new labtop and has windows XP, i installed the CD and downloaded itunes 7.01..
then when i connect my ipod with the USB, it reads the following:
DO NOT DISCONNECT
and my computer cannot read the ipod...i always have to reset it to listen to my songs, but i cannot update new songs..
PLEASE HELP ME!!!!

OK first see this article...
http://docs.info.apple.com/article.html?artnum=61672
One thing to note is that you can format the iPod as FAT32 (Windows format) and it "may" work on your Mac. So one thing you might try is plug it into the Windows machine and follow the directions here...
http://docs.info.apple.com/article.html?artnum=60983
Now that it is reformatted for Windows, go into the preferences and click on the iPod and click the box to "Enable Disk Mode". Now, take it and plug it into the Mac.
It hopefully will show up on your Mac's desktop as a disk drive. You can grab your iTunes folder and drag it into the iPod to copy everything over onto the iPod's hard drive. Eject, move it back to the Laptop, open the iPod as a disk drive, and copy the iTunes folder onto your Laptop. You should now be able to add all your stuff to the iTunes library on that computer.
Then delete that folder out of the iPod to free up room and then sync the iPod to iTunes on the laptop.
How to use your iPod to move your music to a new computer
http://docs.info.apple.com/article.html?artnum=300173
Patrick

Please help CS 4.2 will not import ANY video file

I've been working for days to get this fixed. Everything installs fine software wise and I am using a
Matrox RTX2 for capture/playback but Prem CS4.2 will not import any video file type.
My system is up to spec.
I've seen this problem discussed but none of the (many) suggested solutions have helped.
I've uninstalled and re-installed the OS and clean install multiple times and still I get "file format not supported" with EVERY file type.
Please help!
Brian

Brian,
Welcome to the forum.
When issues occur with Matrox cards, updating its drivers often fix things.
If you create a non-Matrox Project, can you then Import AV files?
Good luck,
Hunt

Please help!! Laptop is not working and needed for homework!!!

I have a Toshiba laptop. The model is Satellite A215-S5837. The problem I have is this. Starting this morning when I turned on my laptop it was black for 10 minutes and then it starts loaing files. After it is finished loaing it goes to the regular Windows Vistas is loading screen. Then it goes black again and after 10 more minutes the mouse cursor shows up an nothing else. It nevr gets to the welcome screen where I can log on. It just stays black with a mouse cursor that responds when I move it. Please help quickly because I have homework ue soon for my summer class and I need to finish it tommorrow else I fail.
P.S. Please don't tell me to restore my computer because I don't have my restore disk with me because I am currently studying abroad.

Re: Please help, printer is not working "ink system failure"
12-13-2009 02:52 AM
Please help, printer is not working "ink system failure"
13
-12-2009 02:29 AM
Hi,
Any help appreciated. My printer is Photosmart C7288 All-in-One Printer.
As of 2 days ago my printer has not been working. It comes up with several error messages after I switch it on. The first one is "Ink system failure: Ink system has failed. Unable to copy, recieve faxes or print. Refer to printer documentation. Error: 0xc18a0105. Turn power off then on again."
However when I turn power off then on again via the 'power' button, ".ink system failure Then the same original error message comes up (0xc18a0105). This is the most frequent error message and won't go away. Then I also keep getting a message saying "Photo Tray Problem: Lift output tray up, verify the photo tray is pushed in until it stops, lower output tray". Despite the fact that I have not used the photo tray in several months and it is in the correct position.
So far I have tried switching the printer on and off several times using the power button. I also switched the printer off at the plug last night (after it had been properly shut down) and switched it back on this morning. I have looked through the printer documentation but could not find any troubleshooting advice for this kind of problem. I have updated the HP driver using software update on my mac, and the problem is still there.
I'm getting desperate now, I rely on my printer/scanner/photocopier a lot!
Thanks
karaman bera

Please help, my phone layout will not load by default.

I created a phone layout for my website, but it is not loading on the iPhone 5 (using Safari)- unfortunately I don't have another type of device to test it on. If I manually enter "device=phone" instead of "device=desktop" it loads the correct format, but it will not load unless I do that. I tried it in 2 different iPhones, one of which had not previously visited my site, and it's a persistent issue. I am considering deleting the site via business catalyst and then publishing it again fresh to kind of reset things, but I'm new to Muse/Business Catalyst/Web Design in general so I'm concerned that might be overkill and might cause other issues. Any advice on further troubleshooting would be much appreciated.
The url is http://www.annagator.com/
Thanks!
-Anna
Update: I just tried re-publishing the site making sure "all files" was checked instead of "modified files" but that didn't help either :/

No problem, here is a shot of my plan mode in Muse for both versions, so you can see how it's supposed to work. The issue is less important on some pages than others, like it's a big issue on the illustration and resume page, its difficult (kind of impossible) to access all the content on those without the proper layout. Also, I did get confirmation through some other people that it is definitely not working properly on their devices.

Help, my tab order will not work? Tried to troubleshoot, no luck!

I created a form used the manual tab order and it would not work. I adjusted the hierarchy and erased all the traversal's in the XML. The tabbing order is now automatic but still out of order pretty badly. Can someone please guide me in the right direction. I really want this form to be over with.

Hope you considered following point.....When you set the Tab order you set the order starting 1 to n with in each subform. Setting taborder across the subforms is not an option at least in LC 7 and 8. However there is workaround for this, using setFocus() method.... look more in the help.
Example: xfa.host.setFocus("xfa.form.form1.TextField1");
If you still have difficulty attach a copy of your template and explain in detail what you try to do.

Please help! 60Gb Vision:M not worki

This is a long story, I suspect my Zen is dead but I'd be delighted to be proven wrong!
Recently my Zen was not playing particular songs - a message saying "playback error" would come on the screen.
I tried to replace the musiclibrary on the player by clearing all music files and adding the new ones. However, having cleared the music files I noticed that while the player now had no tracks on it, the information menu on the player still said the amount of memory used BEFORE i cleared the tracks was still being used. I switched off the player, with the intention of loadingthe musicon the next day. Now here's the problem that faces me.
The Creative logo comes on, then the "rebuilding" status bar, which fills about /8 of the bar and then goes blank. The device is unresponsi've, but is still powered as the light by the switch is on. It doesn't switch off until it powers out, and the Creative media explorer doesnt recognise it when i plug it into the laptop.
I have tried the reset button, but the player simply goes through the same sequence.
PLEASE help - apart from the personal use I get from the player, I use it for work - the dictaphone is essential as I'm a journalist.
Also, I bought this Zen when on holiday in New York, and being from Ireland, returning it to the store isn't an option and I'm fairly sure it's no longer in warrenty (bought in November 06) .

Sounds like hardri've is going bad. The Creative website does have refurbs in the Saving Center section or you may be able to replace the hard dri've one that size would be pricey. Check to see if there are any solutions here http://epizenter.net/e07_plugins/forum/forum.php or post the problem see what info you can get.

PLEASE HELP ME MY IPOD WILL NOT SYNC !!!!!!!!!!!!!!

OK SO I DID HAVE THREE THOUSAND SONGS IN MY ITUNES BUT A RECENT SOFTWARE UPDATE TO BY IPOD TOUCH BY ITUNES HAS COMPLETLY WIPED EVERYTHING FROM MY LIBRARY!!!!!! SOO I HAVE NOW DOWNLOADED ITUNES AGAIN ONTO A DIFF LAPTOP AND ONCE AGAIN DOWNLOADED SOME SONGS INTO MY LIBRARY...... HOWEVER WHEN I PLUG MY IPOD INTO USB ITS NOT SYNCING AND MY SONGS ARE NOT DOING ONTO IPOD !!!!!!!!! I HAVE TRIED RESTORING TO FACTORY SETTINGS AND CLICKING THE AUTHORIZE COMPUTER TAB AND STILL NOTHING ........... PLEASE HELP !!!!!!!!!!!!!!!!!!!!!!!
ALL IT SAYS IS IMPORT PICTURES AND VIDEOS BUT DOESNT SAY ANYTHING ABOUT SYNCING MY SONGS .........................

Firt make sure y ohave the right setting checked for syncing:
iTunes 11 for Windows: Syncing overview
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
Next try this:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
The iPod does appear i iTunes right? If not:
iOS: Device not recognized in iTunes for Windows
You are really not giving us much information like what happens when you try to sync.

Please Help! My Powerbook will not boot up and is SCREAMING at me!

I went to change my laundry and when I returned my mac was emitting a high pitched "scream" from the hardware (not from the speakers). It would not respond to any commands.
I removed the battery and now it will not start up...it will go to a grey screen and make that very loud screaming noise...it sounds like it is coming from a moving part (the hard drive or fan). What should I do?
Thank you all for your time!

hard drive is located in the lower middle of the case, under trackpad, if noise comes from that area could be failed hard drive.

Please help!! Adobe reader not working

Hello,
My Adobe Reader XI will not open all docs. It says (57) in the message. What can I do? I tried to uninstall all Adobe programs to start fresh but it keeps saying something about the "patch"?
I'm doomed over here!!
Thank you, Bill V

Download and run the Adobe Cleaner to remove Reader completely. http://labs.adobe.com/downloads/acrobatcleaner.html
Then download the FULL installer to replace it. http://get.adobe.com/reader/enterprise/
Open Reader and accept the EULA, and you should be "good to go".

Please help... jam packs not working with logic express 8

my jam packs do not work. i go to the library tab, open one of the jam packs category, "Symphony Orchestra" for example. i choose an instrument folder ("strings" for example), and then an instrument. a window pops up and says "File not found... Result code = -43". What does this mean? What can i do to fix it?
You my also know that the jam packs work fine in Garage Band.

Hi,
on a UNIX based system, every file has it's own set of permissions who own it, who can read it or who can write to it. Sometimes, things get corrupted (often during an install or update, when administrator rights are used or not used....)
However: Open the Harddisk Utility in the Applications/Utilities Folder. Select your Harddisk and klick on "repair permissions". Wait for some minutes (takes some time).
You should do this not only now, but before and after every major update/change to your system.
The next step, if this doesn't work, would be to manually locate the files EXS24 is missing, but for this better ask someone in the Logic Pro forum.
Fox

Will you please help me? ipad will not reset "network settings" or forget network!

My ipad will not connect to WiFi although my laptop does. When I try to reset network settings the old settings reappear. It will not "forget this network". What do i need to do next?

I don't fully understand what the System Reset does but I've found that it cures many ills. It's easy, quick and harmless:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
Also, you might wish to download the iPad-2 User Guide. Pay special attention to page 162. Note that this Guide also applies to the iPad-1 with IOS 4.3 except for those functions that are not supported by the hardware.
http://support.apple.com/manuals/#ipad
Finally, the User Guide can be downloaded at no charge via iBooks and a less comprehensive version of the Guide is included as a Safari bookmark.

Please Help. Lightbox Gallery Widget will not work

Similar Messages

Maybe you are looking for