Please help locate imported contacts

new iMac: OS X 10.8.2
I am trying to help someone locate their contacts- which were imported (not by me) from a NON Apple computer
when they click on "Address Book" now, it is empty
I tried Applications / Contacts and same result
please advise-- thank you

These may help:
Importing contacts into Address Book
http://support.apple.com/kb/PH4672
http://support.apple.com/kb/PH4648
http://support.apple.com/kb/PH4655

Similar Messages

HT203167 I can't even find the app in the store. Please help. I contacted the camadu app support but they haven't rep

I bought the app peru tv in march. Sometimes it stays idle when downloading a tv channel so I ended up deleting the app and reinstalling it. Today I can't even find the app in the store. Please help. I contacted the camadu app support but they haven't replied regarding problems with channels and lost app

In order to properly upgrade the OS of your Mac. 10.1 Puma is really old. Your Mac has to meet the tech specs for Lion: And it would probably need to be a clean install. If you recently purchased Lion. Call Apple Care CPU and ask them to be sure. You get 90 days Free of phone support. 1-800-275-2273
Apple - OS X Lion - Technical specifications
General requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.

HT4906 hello, my hard drive broke. I purchased a noew one. Now I have no access to Iphone or any of my old apps. even after I reldownload them. Please help. Important fro work.

hello, my hard drive broke. I purchased a noew one. Now I have no access to Iphone or any of my old apps. even after I reldownload them. Please help. Important fro work.

Not ure what this has to do with iPhoto. Perhaps you'd be better off asking on the forum for your MacBookPro.

Please help me - importing videos

Please help me if you can... I just finished converting a video on Videora, and now I have located the file, but I cannot drag and drop it into iTunes. I have tried going to File > Import... locating the file, and entering it, but that has not worked. Then I tried putting the file as a desktop icon and dragging and dropping it into iTunes, but that appeared to have failed also. Your suggestions would be greatly appreciated - please!

I have the same problem too. I downloaded videos from limewire and it says that its a WAV file or something but its really quicktime. Maybe I have that backwards but I wonder if it can be converted to the correct file that the ipod plays.

Could someone please help me import my iphoto photos into aperture? They are now just referenced files.

Hello,
I am a longtime iphoto user and installed aperture this past december. At that time I imported all my iphoto photos as referenced files and kept them in their iphoto location. Since that time, every photo I took was uploaded directly into aperture and stored there. I am now comfortable enough with aperture that I would like to use it as my primary photo viewer / manipulator and would like to merge my two libraries into one single aperture library. Unfortunately, I cannot figure out how to do this.
I tried consolidating all originals yesterday, however this did not seem to have any effect. I then tried reimporting my iphoto library, however, this simply duplicated many of my events (and the duplicated ones were not even adjustable via aperture, and each photo had a little exclamation point in the lower right corner). Both of these attempts did nothing to combine my aperture projects and my iphoto events (which are now seen as a seperate iphoto tab under projects). I am aware that I can now switch to my iphoto library within aperture in version 3.3, but I just want everything stored in one place and in my aperture library. Can someone please help me with this?
The only thing I can think of is deleting all of the iphoto events from aperture and then reimporting them, but I am scared I will either delete something permenantly or that they will simply reimport as referenced files and remain within iphoto.
Please help!
Thanks,
- Mike

Mike,
I am not quite clear about the current state of your iPhoto and Aperture libraries. It looks like you have plenty of broken links to referenced masters in either library. Whatever you do now, it is very important to ensure that you have a working backup, both of your iPhoto Library and your Aperture library, before you try a major reconstruction.
I tried consolidating all originals yesterday, however this did not seem to have any effect.
In what way did it not have any effect? From the effects you are describing, it looks like all your original master images have been removed from the iPhoto Library and are now inside the Aperture library as managed masters - at least, this would explain, why trying to import the iPhoto library resulted in duplicated projects (and the duplicated ones were not even adjustable via aperture, and each photo had a little exclamation point in the lower right corner). You removed the original masters from the iPhoto library, and now you could not import it, since the originals are now in Aperture.
For me it looks, like you simply need to delete the iPhoto images marked with an exclamation mark, for these are already bound to images that you imported earlier. It is perfectly o.k. that the recently imported iPhoto Library appears in a separate section of the projects in your Library Inspector Panel. Each iPhoto event should appear as a project. Aperture will put them there, so you can find them easily.
You should check now, if the originally imported images, that you imported as referenced, are now managed. If you enable badge overlays you should see no longer any arrows on the thumbnails of your earlier imports. Also, if you select one of these images, you should be able to toggle between original master and version by typing the "M" key.
Define some smart albums (File > New > Smart album) based on the file status: Add a rule: File status is.
One smart album: File Status is referenced
One smart album: File Status is managed
One smart album: File Status is missing
The first album should be empty.
The second album should show all your images you originally imported from iphoto as managed, and that you recently consolidated.
The third album should show your recent import - the images imported from iPhoto after you consolidated the originals to Aperture and removed these images from iPhoto.
Post back, when you have checked the file status of your images in Aperture and we can be sure were the images are exactly.
Regards
Léonie

Please help !! Contact form not sending mail

www.concretegta.com
in the contact us page i have made a little contact form, but i am not recieving mail to my email. Can someone please help, http://www.concretegta.com/contact.html is where the form is.
this is the coding for the php
<?php
$mailto = '[email protected]' ;
$subject = "Feedback from General Concrete Solutions" ;
$formurl = "http://www.concretegta.com/contact.html" ;
$thankyouurl = "http://www.concretegta.com/emailsent.html" ;
$errorurl = "http://www.johnsmith.com/oops.html" ;
$email_is_required = 1;
$name_is_required = 1;
$comments_is_required = 1;
$uself = 0;
$forcelf = 0;
$use_envsender = 0;
$use_sendmailfrom = 0;
$smtp_server_win = '' ;
$use_webmaster_email_for_from = 0;
$use_utf8 = 1;
$my_recaptcha_private_key = '' ;
// -------------------- END OF CONFIGURABLE SECTION ---------------
define( 'MAX_LINE_LENGTH', 998 );
$headersep = $uself ? "\n" : "\r\n" ;
$content_nl = $forcelf ? "\n" : (defined('PHP_EOL') ? PHP_EOL : "\n") ;
$content_type = $use_utf8 ? 'Content-Type: text/plain; charset="utf-8"' : 'Content-Type: text/plain; charset="iso-8859-1"' ;
if ($use_sendmailfrom) {
ini_set( 'sendmail_from', $mailto );
if (strlen($smtp_server_win)) {
ini_set( 'SMTP', $smtp_server_win );
$envsender = "-f$mailto" ;
$fullname = isset($_POST['fullname']) ? $_POST['fullname'] : $_POST['name'] ;
$email = $_POST['email'] ;
$comments = $_POST['comments'] ;
$http_referrer = getenv( "HTTP_REFERER" );
if (!isset($_POST['email'])) {
header( "Location: $formurl" );
exit ;
if (($email_is_required && (empty($email) || !preg_match('/@/', $email))) || ($name_is_required && empty($fullname)) || ($comments_is_required && empty($comments))) {
header( "Location: $errorurl" );
exit ;
if ( preg_match( "/[\r\n]/", $fullname ) || preg_match( "/[\r\n]/", $email ) ) {
header( "Location: $errorurl" );
exit ;
if (strlen( $my_recaptcha_private_key )) {
require_once( 'recaptchalib.php' );
$resp = recaptcha_check_answer ( $my_recaptcha_private_key, $_SERVER['REMOTE_ADDR'], $_POST['recaptcha_challenge_field'], $_POST['recaptcha_response_field'] );
if (!$resp->is_valid) {
header( "Location: $errorurl" );
exit ;
if (empty($email)) {
$email = $mailto ;
$fromemail = $use_webmaster_email_for_from ? $mailto : $email ;
if (function_exists( 'get_magic_quotes_gpc' ) && get_magic_quotes_gpc()) {
$comments = stripslashes( $comments );
$messageproper =
"This message was sent from:" . $content_nl .
"$http_referrer" . $content_nl .
"------------------------------------------------------------" . $content_nl .
"Name of sender: $fullname" . $content_nl .
"Email of sender: $email" . $content_nl .
"------------------------- COMMENTS -------------------------" . $content_nl . $content_nl .
wordwrap( $comments, MAX_LINE_LENGTH, $content_nl, true ) . $content_nl . $content_nl .
"------------------------------------------------------------" . $content_nl ;
$headers =
"From: \"$fullname\" <$fromemail>" . $headersep . "Reply-To: \"$fullname\" <$email>" . $headersep . "X-Mailer: chfeedback.php 2.16.2" .
$headersep . 'MIME-Version: 1.0' . $headersep . $content_type ;
if ($use_envsender) {
mail($mailto, $subject, $messageproper, $headers, $envsender );
else {
mail($mailto, $subject, $messageproper, $headers );
header( "Location: $thankyouurl" );
exit ;
?>

>? i dont understand why there would be secuirity
>risks... did i do something wrong??
Most of the time McAfee SiteAdvisor gets it right but it's not perfect. It's possible there is something suspicious on your site but if you think everything is ok request a review:
https://www.siteadvisor.com/analysis/recommendchanges/?url=http%3A//www.concretegta.com/

Please HELP very important video lost after restoring from backup

I used my iphone 4 to record me preposing to my fiance and then today I stupidly sync to computer and restore from my 3GS backup before backing up the video files. Is there anyway to get the video back? Please help this is the most important thing in our life. Anything, Anyone please help. I am very devastated right now!

Too be honest. If you recorded the video on the iPhone 4, and then synced the iPhone 4 to iTunes to the computer it is usually connected to, then the video should be backed up.
I'm not sure though, how you managed to have your iPhone 4 up and running, but then restore from a backup from your 3GS?? If you have synced your iPhone 4 to iTunes before, then the backup will have been from the iPhone 4. You get the option the first time you connect the iPhone 4 to iTunes, to either setup as a new device or restore from a backup (that's if you have had a iPhone previously). You can restore the iPhone (which would set it up has a new device, which would remove everything off of it). If you have done this, has far as I know the old information off of the iPhone, would be still there until you synced the iPhone to iTunes again.
In Windows, the library file for iTunes is in username (whatever you are called) music/iTunes, the library file is called iTunes Library.itl, also in this location is the iTunes/iTunes Media folder, in there should be any video/s that have been synced from your iPhone.
Other information off of the iPhone are in the following location:
(You will need to first make sure you have Windows set to show hidden files & folders), Username/AppData/Roaming/Apple Computer
I hope you manage to find your video.

PLEASE HELP LOCATE SONGS FROM EXTERNAL HD (Cloud)

First off, I would like to thank ANYONE who can help me out please! I am desperate now for some advice to help me through this, I have spent the last 10 Hours (Not Exaggerating) trying to find a solution to my problem online and reading through countless things I HAVE NOT been able to get an answer to resolve the issue that I am having. Please I beg you to help me! I just wanna call Apple Support so that someone can walk me through this but I am using a Windows and they won't take calls from Windows users (which is kind of lame since I am an Iphone/Ipad/Itunes customer just not on an Apple Computer) and honestly I would even pay money to have this issue fixed already I just don't wanna waste any more time on it!!!
SO, that being said. Here is the most concise explanation I can give you of my troubles!
1. I have both a Laptop and a Desktop. My Laptop has been my primary source for Itunes for the passed 8 years, however, it is old and I want to start using my Desktop for Itunes from now on..also, I NEED to free up space on my Laptop so that I can back up my Iphone 5 which has a broken screen, but that's another story!
2. I Purchased something called a "WD MY CLOUD" Which is basically a personal ICloud that has 2TB of external HD Space on it. I hooked up my WDMyCloud and configured it, got it working perfectly, and I began the multiple hour long process to transfer my ITUNES Folder from my Laptop over to the WDMyCloud.
3. All of the files and songs were successfully transferred from my Laptop to the WDMyCloud.
4. I Installed Itunes onto my Desktop.
5. I shift+clicked Itunes and chose the Itunes Library from my WDMyCloud. I believe the file is found in: \\WDMYCLOUD\Oliver\iTunes\iTunes Library. (And that is the .itl)
6. When I have Itunes open, I go to preferences, and I change the MEDIA Folder to the iTunes Music Folder located on my WDMyCloud. I believe the file is found as: \\WDMYCLOUD\Oliver\Itunes\iTunes Music. (It does have all of my songs in there on the WDMyCloud in Folders by Album or however itunes had it organized)
7. Now I am staring at my Itunes Playlists and All of my Songs are there, however, whenever I try to Play ANY Song on there I receive this error: "The song "xx" could not be used because the original file could not be found. Would you like to Locate it?" (And no, I would not like to manually locate over 3,000 songs)
Also, every single Song has an "!" Exclamation mark next to it.
8. If I use "Get Info" about the track to see where Itunes is looking for the track, I will show you an example now here to what it says:
"file://localhost/C:/Users/Oliver/Downloads/Firebeatz - Gangster (Original Mix).mp3"
(Now I do realize that this is incorrect, it should be looking for the songs in my WDMyCloud, that path above is from my Laptop's Downloads Folder and I have no idea how to fix this.)
9. I have also tried using the "FindTracks.vbs" on my \\WDMYCLOUD\Oliver\Itunes\iTunes Music Folder and this did nothing, at all.
10. I have opened the Itunes Library XML that is saved onto my WDMyCloud from my Laptop, and it shows the script as:
<plist version="1.0"><dict><key>Major Version</key><integer>1</integer><key>Minor Version</key><integer>1</integer><key>Date</key><date>2014-05-24T16:40:35Z</date><key>Application Version</key><string>11.2</string><key>Features</key><integer>5</integer><key>Show Content Ratings</key><true/><key>Music Folder</key><string>file://localhost//WDMYCLOUD/Oliver/Itunes/iTunes%20Music</string><key>Library Persistent ID</key><string>5C3728163E81BB1D</string><key>Tracks</key>
<p
^^ Now I'm not really sure how clumped up that is going to look once I post cuz when I tried copy/pasting it from the XML on to here it came out looking super weird, but as you can see the key thing there is that the file it says it's looking in is the Itunes Music file in my WDMyCloud. So I don't know what could be wrong with the XML script path if there is anything wrong with it at all. The rest of the XML is super super long list of all my tracks and albums an such which is obviously unimportant to this matter. But maybe this can help figure out my problem.
Anyway, that's about as far as I was able to get after 10 hours of research, and like I said, still no solution. I'm stuck! Please please please help me figure this out! One of the biggest reasons I purchased this WDMyCloud was to use it as a consistent Itunes mediator between my devices and I absolutely MUST free up space on my Laptop ASAP and this is the only way! Thank you so much for your help in advance!!

See Make a split library portable for some general advice on making a working library portable. It should be less hassle than fixing a broken one.
Since the library works perfectly on the laptop I would suggest you start over and do it like this;
1. Create a new iTunes folder in the root of the external as \\WDMYCLOUD\iTunes (capitalised as shown please, just to appease my OCD)
2. Copy into it the following items from C:\Users\Oliver\Music\iTunes
Album Artwork
iTunes Library.itl
iTunes Library Extras.itdb
iTunes Library Genius.itdb
sentinel
3. Shift-start iTunes and open the library at \\WDMYCLOUD\iTunes\iTunes Library.itl
4. Under Edit > Preferences > Advanced change the media folder to \\WDMYCLOUD\iTunes\iTunes Media (again capitalised as shown please)
5. Use File > Library > Organize Library. Tick both boxes, or the one that isn't greyed out, then click OK.
iTunes will gather in copies of all your media files, putting them into the correct locations so that the library is in the modern layout, and able to be moved from one machine to another.
I'd recommend you clone the entire iTunes folder to another drive (see this backup tip) before you think about cleaning the originals.
If your library is large then having the library files on a network share will slow things down as the database has to be written out almost any time you do anything with your library. Once you've connected the library to the new computer and had it opened and working you can copy the library files and Album Artwork folder into the local C:\Users\Oliver\Music\iTunes folder (deleteing what is already there first) then shift-start-iTunes and connect to C:\Users\Oliver\Music\iTunes\iTunes Library.itl. If/when you want to move the library to a different drive/computer copy the files back out to the drive and access the library there at lease once before the move.
tt2

At My Wits End - Please Help Before I Contact OFCO...

I have been loyal BT customer since... well having a landline in my name.
We have been experiencing problems with BT / BT Broadband now for over 3 months. During this period we have had over 6 engineer visits an countless phone calls to BT Customer Services and also their Priority Care desk and the problem is still not resolved.
Over 3 weeks ago I also sent an email to BT asking for contact from someone residing in the UK that could assist with the issue. I asked for a response within 10 working days and stated failure to respond would result in contacting OFCOM, watchdog and/or Trading Standards.
The problem comprises of two issues -
1] very slow broadband connection - no more than 0.13Mb/s at best (and that is when we have a connection at all
2] zero broadband connection
The telephone line crackles badly too, but as the landline is only there for the broadband this doesn't really concern us too much. We use our mobiles for phone calls.
A similar fault stems back to 2008 when we started experiencing slowing connection speeds, but after a service visit the fault appeared to be fixed until this time last year it slowed to a death again. Following another engineer visit connection stabilised at around 1Mb/s. Then 3 months ago the problem started all over again.
Whenever I call the customer service line, we get routed to their call centre in India where we just keep being fobbed off by engineer visits by engineers that are either not capable of doing the work or do not have the time allocated to do a comprehensive service.
We have been told a huge number of excuses (From aluminium in the ground running next to the cables to faults with our equipment in the house (which has all been replaced for new within the last 3 months) to "we can't find a problem") as to why the service is unstable and slow.
Another Engineer is booked for tomorrow morning, but I am fairly confident they will not solve the issue.
The lack of service is causing problems trying to sort out year end Self Assessment, book holidays, online banking etc... over and above communicating with family living abroad (via Skype) and general surfing - all things we can not do from work.
I have a brief record of all the attempts to resolve the issue including records of speed tests. I can also get the entire case history from BT if necessary (as I think they are compiled by law to hand over any notes they have taken). I also obviously have a copy of the email sent to direct to BT.
Can someone here please, please help or advise who I need to contact to get the issue sorted out for once and for all before I take the matter further?
Solved!
Go to Solution.

1) What is the maximum speed you can get in your area? Type your number into the box on the right of the following web page:
http://www.productsandservices.bt.com/consumerProducts/displayTopic.do?topicId=29017
It will tell you whether you can get BT Infinity and what your potential line speed is for your area.
2) What package are you on? All BT packages are subject to a Fair Usage policy. Even if you are on the 'Unlimited' package your speed will be slowed down if you are a heavy user. Contact BT (call 150 from a BT landline) and choose the options concerning questions about products. Don't choose the fault options else you'll be put through to India. This way you will hopefully be put through to somebody in England as I was, and you can get the matter solved more easily. Try and find out whether your account / line has been put under Network Management.
3) What products do you connect to the Internet with? Xbox? BT Vision? Give us a full list.
4) As the above user imjolly said, run the BT speedtester and post some of your router information. A moderator then may be able to provide assistance.

Problem-PLEASE HELP! IMPORTANT!

I have a Lenovo G530 laptop and all of a sudden, for no reason at all, the integrated webcam that is built into the computer won't work. I always keep my laptop in the same safe place, have never spilled anything on it, have done nothing to make it not work properly. I bought it brand new in September (it is February now) so it isnt that old either. I went to use my webcam on windows live messenger and it came up as a white screen. I went to My Computer, then to take pictures with it from its icon and it came up as the same white screen. I just used my webcam on Skype the other night and it worked fine. Everything else on my computer is running normally, but my webcam is very important to me as I use it alot to keep in touch with friends and family while I'm in university. If someone could please help me it would be greatly appreciated.
Solved!
Go to Solution.

right click my computer > manage > device management > camera > right click > remove device.
restart your computer and let windows install it again.
also you may need to re-install camera software, too.

Please help with importing and using imovie and idvd

Hi,
Please forgive my lack of knowledge. I previously had a mini dv camcorder that was so easy to use with imovie hd. Now that I have switched to an HD Usb 2.0 camcorder that has built in 16gb memory and memory cards, I have had such a great deal of trouble. I really hope you can help and point me in the right directions.
Importing movies are fine, but they take so long! Currently, when I import a movie, I set the camcorder to PC mode and import through imovie. But the camcorder stays on, and I'm not sure if this is the best way or healthiest for the camcorder. Do you have a better/faster way to import movies? Is there a way to drag the video from the memory onto the computer, and then from there import the movie? I think at least I wouldn't have to leave the camcorder on.
Also, one major issue I have is that each movie is broken down into 100 or so clips. I coach basketball, and videotape the games. When there is stoppage, I pause the camcorder. I guess that creates so many clips, so that when the film is imported, there are over 100 clips for the entire movie. Is there a way of making that just 1 entire movie/clip?
Once I have imported the entire movie, which is 100+ clips, I want to simply create a dvd of the game. I know I have to share it, but do you have a better suggestion as to how I should handle this?
In the past, all I did was import the mini dv movie into imovie HD, share into idvd, and then that was it, dvd made. This process had become so time consuming.
Please help!

Yes, I recognized there would be a slight pause between clips - but after all - you paused the camera at those points.
Putting them all in sequence in iMovie and then encoding in iDVD will take a lot of time.
An old favorite saying of mine is "not every job worth doing, is worth doing well'. The meaning being sometimes 95% is good enough so you can go on to the next job.
How much work do you want to put into each DVD? Can you live with the slight pauses?
would you suggest using a memory card?
Yes, but 16GB cards aren't cheap (yet).

Please help with importing packages

I am trying to learn the Java Advanced Imaging (JAI) API. I have successfully installed java2SDK.
I downloaded the JAI library (jai-1_1_2-rc-lib-windows-i586.exe) and have installed it.
After installation, I added the JAI lib to the CLASSPATH.
CLASSPATH = C:\java\jai-1_1_2-rc\lib
when I try compiling a demo program from this tutorial page:
http://developer.java.sun.com/developer/onlineTraining/javaai/jai/src/FrontPage.java
I get these errors,
package javax.media.jai does not exist
import javax.media.jai.JAI;
how do I know which directory to copy the JAI lib files to so that
this import statement can find JAI
import javax.media.jai.JAI;
please help if you can
Thanks
John

Hi,
You have to give the full path of the jar file in classpath along with the jar file name
something like CLASSPATH = C:\java\jai-1_1_2-rc\lib\jai.jar ...see the jar file name and include that also

Please help - CD import issue in itunes

I would really appreciate some help.
I have a Sony Vaio laptop and a HP I Pod.
Have used Itunes with no problems for 9 months and have imported/ripped hundreds of CDs into my library with no issues.
Recently, however, iTunes stopped allowing me to import/rip CDs into my library. When I try, it imports the first 4-5 seconds of the first song and then locks my entire computer up. I have to power down the laptop.
I attempted to run the CD diagnostic through iTunes, that also locked up the laptop.
I have uninstalled and re-installed iTunes several times.
I had my IT guy look at the laptop and do some preliminary research. He indicated that this is not uncommon and that others have reported having this problem since upgrading to iTunes 6.0.
Based on that, I un-installed 6.0 and went back to the version that came with the iPod. I think it is 4.9. Problem still exists.
Please help. I still have a lot of music I would like to load into iTunes.
Thanks!

This is what my CD Diagnostics results are:
Microsoft Windows XP Home Edition Service Pack 1 (Build 2600)
HP Pavilion 061 PE529A-ABA A523X
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: Pfc (2.5.0.204), PxHelp20 (2.0.0.0), AFS2K (3.1.19.0), MxlW2k (1.1.0.116),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: VIA/S3G UniChrome Graphics\VIA/S3G UniChrome Graphics Adapter
IDE\DiskSAMSUNGSP1203N________________________TL100-24, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskGenericUSB_CF_Reader__1.01, Bus Type USB
USBSTOR\DiskGenericUSB_MS_Reader__1.03, Bus Type USB
USBSTOR\DiskGenericUSB_SD_Reader__1.00, Bus Type USB
USBSTOR\DiskGenericUSB_SM_Reader__1.02, Bus Type USB
IDE\CdRomNEC_DVD+RW_ND-2100AD___________________1.26___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: _NEC DVD+RW ND-2100AD, Rev 1.26
Audio CD in drive.
Found 12 songs on CD, playing time 54:58 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 06:08:02
Track 3, start time 10:47:27
Track 4, start time 15:01:15
Track 5, start time 19:07:55
Track 6, start time 22:46:30
Track 7, start time 27:29:05
Track 8, start time 31:34:72
Track 9, start time 35:35:07
Track 10, start time 39:56:50
Track 11, start time 43:22:07
Track 12, start time 49:42:17
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 20 24 32.
The drive CDRW speeds are: 4 8 16 20.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.

Please help with restoring contacts on Iphone 4S

Still haven't gotten an answer to my question yet. I want to perform a complete restore on my 4S before upgrading to IOS 6. The only data I want transfered over are my contacts. Can I do this without restoring from a backup via Itunes on my PC? Someone told me awhile ago that the only way to get contacts back on your iphone is by restoring from a backup. Please help. Thanks

if you're in the UK try a company called fixmyiphone. I had the same issue - Apple told me it was not repairable. I tried the 'hairdryer trick' (look it up on youtube) but it did not work and finally I found this company - fixed it on the spot for £40. Highly recommend. An iPhone without wifi is called an iBrick.....

Please help, very important file corrupt

Hi,
I am writing my final thesis, (more than 100 pages) and indesign crashed this moring while writing. Now the file can't open anyware anymore. I am using CS6 trial version, and even on other mac and pc it will not open anymore.
How can I get my file back? Please help me..
Thanks a lot!

It's usually a bad sign when the file will no longer open even on another computer. Do you get any error messages?
Find, and empty, the InDesign Recovery folder in your user library to keep ID from crashing over and over when it tries to open the bad recovery data. (The recovery folder is in the same folder where the InDesign SavedData file is stored, and the path information for your OS can be found in Replace Your Preferences Note that this folder is gong to be a hidden folder if you run Lion, so you need to display hidden folders in your search).
Once that is done, start InDesign and use FIle > Open... to navigate to the original location where the file is saved. Tick the radio button to "Open as a COPY" and cross your fingers. If you are REALLLLLLY lucky it will open, and if it does, IMMEDIATELY export to .idml, then save the file with a new name as a backup, too. File > Open... and open the .idml file you just made, Save As to yet another name and you should be good to go.
If it doesn't open, do you have any backup copies someplace? If not, you best hope is probably Markzware: Bad InDesign or Quark File Recovery Submission Form
Now some advice on preventing this from happening again (though a crash is outside your control). First, never work directly off a removeable drive, if that's your habit. Copy the file to the hard drive, edit, then copy back to the removeable drive. Do a Save As from time to time to clear out the old, useless and inaccessible change data from previous sessions and reduce the file size. Make backup copies every day. If you do the save as each time you are done working, and add a versioning sequence to the name or something similar you take care of two birds with one stone.

Please help locate imported contacts

Similar Messages

Maybe you are looking for