PLEASE HELP! Mail recieving thousands of already recieved emails...

I'm still on an iMac ver. 10.2.8. Prehistoric, I know.
Almost daily, my Mail will suddenly start retrieving over a thousand or so "New" messages. These emails are not new, but just a re-retreiving of my incoming mail from the last few days or weeks.
It doesn't matter if I've deleted mail, responded or otherwise. It just suddenly retrieves the last thousand or so emails that I've already been sent.
CLUE- Every time this happens, I also get a single strange email. There is no content to read/see, no subject in the header, and no email address that it's coming from! I would try blocking this specific spammer (if that's what the problem is) but there's no visible email address to block...
PLEASE HELP! This happens randomly, and now sometimes twice a day. It takes me almost an hour each time to filter out the doubled, tripled, and quadrupled emails!
Thanks so much in advance for any help you can give!

Have you tried removing the emails from the mail server? Perhaps your setting keeps them there and Mail is redownloading them.
goto preferences>Accounts>Advanced and make sure "Remove copy from server after retrieving a message" is checked and "Right away" is selected on the drop down. Also, try clicking the "remove now" button.
in theory, Mail shouldn't be downloading messages you've already gotten off the server with Mail, but things don't always have to make sense when it comes to computers.
Hope this helps!
iBook G4 Mac OS X (10.3.9)

Similar Messages

I am facing this issues that music stops playing when the display goes...Please help me with this, I already reset and checked headphones still quits working.

My IPod Nano stops playing music when display goes out. I already tried the resolutions suggested and still having problem. Please help!

i've had my ipod for awhile and it just started doing this - last night. it plays for about 30 seconds and stops. i press play again and it restarts where it had stopped. i had wondered if i had accidentally set it to 'sample' or something.

PLEASE HELP MAIL KEEPS CRASHING!!!!

For some reason my mail keeps crashing. Whenever I try to do anything with my junk mail, the program crashes. If I mark an email as junk it crashes. If I try to move an email out of my junk mail it crashes. Can someone please please please help me out? I've tried to reset my junk mail settings and it still crashes....
Thanks
Joe

Are you really using Mac OS X 10.4.2, as your profile indicates?
There is probably some corruption in one or more of the files used by the junk filter. The following procedure thoroughly gets rid of all those files, so that Mail creates them anew:
1. Quit Mail if it's running.
2. In the Finder, go to ~/Library/Mail/.
3. Locate LSMMap2 and move it to the Trash. This file stores information about what does and doesn't constitute junk, and is what allows the junk filter to learn. Clicking the Reset button in Preferences > Junk Mail also deletes LSMMap2. The file was called just LSMMap in early versions of Mail, delete that as well if you see it.
4. Locate DefaultCounts and move it to the Trash. This file keeps statistics about the number of messages that have been marked as junk, either automatically by the junk filter or manually by the user.
5. Locate MessageRules.plist and move it to the Desktop. This is where Mail 2.x stores all rules, including those used by the junk filter. If there is a file called MessageRules.plist.backup, move it to the Desktop too. You may also see MessageSorting.plist files there; this is where Mail 1.x stored the rules, and they are no longer used by Mail 2.x, so just move them to the Trash if you see them.
6. Look for the account folders. The name of each account folder starts with the account type (POP, IMAP, Mac), followed by the account username and the incoming mail server. Open each of the account folders, locate the Junk.mbox or Junk.imapmbox folder within it, and move it to the Trash if present.
7. Go to ~/Library/Mail/Mailboxes/. Locate any Junk.mbox folders there (their name may include the account name in parenthesis), and move them to the Trash.
Note: Messages in Junk folders with an .mbox suffix are stored locally, and will be lost forever as a result of doing steps 6 and 7. If there is a chance that you have legit messages there and you want to preserve them, move them to another mailbox in Mail first. If you cannot do that for some reason, move the folder to the Desktop (to be imported later), instead of to the Trash. Messages in Junk folders with an .imapmbox suffix are stored on the server and can be deleted blindly (Mail will rebuild those mailboxes automatically).
8. Open Mail. As a result of removing the rules file, the junk filter will be disabled now. You may want to either tell Mail to go offline immediately after opening it, or shut down the Internet connection before opening Mail, to prevent it from downloading anything until the junk mail filter has been enabled again.
9. Go to Mail > Preferences > Junk Mail, enable junk filtering, and configure it however you wish.
10. Go online again if you went offline in step 8.
If the above solves the problem and you don't have any rules you'd like to preserve or recreating them is not a daunting task, just delete the MessageRules.plist files that were moved to the Desktop and be done with it.
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder, i.e. ~/Library is the Library folder within the user's home folder. You can easily locate any of the folders referred to in this post by copying the file path here, doing Go > Go to Folder in the Finder, and pasting the file path there.

Mebody Keep on getting a message that says write access not granted if i whant to safe my edited images! Please help? Preview check box already unchecked

please help me with this problem? I keep on getting a message saying write access not granted, so i cant safe my files!

The drive appears in the sidebar with a tiny lock icon, and when I try to copy a file from my internal HD to the external (top level directory, or drag the items right onto the icon), the following things happen:
Open the Terminal in the /Applications/Utilities/ folder and enter the following:
chflags nouchg
followed by a space; next, drag the disk into the Terminal window and press Enter. The lock should now be gone.
The fact that my account was named both as owner and group seemed odd, since in Group the access was "read only".
Recent versions of Mac OS X create a group with the same name whenever you create an account from the Setup Assistant or System Preferences. The Group permissions don't apply in this case.
I changed the Group access to "read & Write", but it's not "sticking" -- when I close teh details field and reopen it, or close the get info window and reopen, the Group access settings go back to "read only".
Did you get an error message after doing this?
Verify/Repair permissions were dimmed for this drive (I assume becuase it doesn't have MacOS X installed on it?)
That is correct. The Repair Permissions mechanism uses data from the /Library/Receipts/ folder on a disk to function, and this data is only present on disks which have Mac OS X installed.
(12377)

Please help, I'm unable to send an email with a pdf attachment

We have Windows 8 Pro on the pc, I have been trying to send a pdf document that my husband needs to his work and no matter how I try to send it (either from reader or directly from my email with the attachment it just will not send. Can anyone please help?

No worries. But it is strange that you cannot even send email with a PDF attachment from Microsoft Mail. At this point, no PDF viewers (e.g. Microsoft Reader, Adobe Reader Touch) are involved because you are not viewing PDF files.
Instead of saying "It won't send", you need to describe exactly what you see on the screen for every step. Where does the problem start?
Step 1: Attaching a PDF file to new email in Microsoft Mail
Are you able to find the PDF file and attach it to new email?
Step 2: Sending email with a PDF attachment
What happens when you click the Send button? Does it hang forever? Does it show an error message? Could you confirm that you can send email with other type of attachments (e.g. text file, Word file) from Microsoft Mail from the same PC?
You can provide the details to Microsoft for troubleshooting.
Alternatively, you can try to send email with the PDF attachment from other accounts like Gmail (Google Mail) or Yahoo Mail via the web browser (Internet Explorer) interface.
Sometimes, rebooting your system solves "mysterious" problems, too.
Good luck!

PLEASE HELP! I have lost all my Emails and Addresses

I recently upgraded to Mac OS 10.3.9 and Mail 1.3.11. I don't know what happend but when I started my computer today all my personal settings were set back to the default settings, all my emails and addresses are gone, and in Safari all my bookmarked pages are gone. I did a search here for relevant solutions but it seems most issues have to do with converting to 10.4. I'm begging...... Can anyone please help me recover this info?
Thanks in advance.
Steve

Hi Steve
This is Tiger's Mail & Address Book Discussion Forum. To get to Panther's, click on 'Discussions' at the top of this page, then choose Panther and earlier, then Mail & Address Book.
Good luck.

** please help - mail view issue **

ok, this is driving me nuts and i dont know how i did it.... the view on my mail changed while i was navigating through emails one day. Originally, it had the mail displayed On My Mac with all of my folders underneath it. NOW all of a sudden it is showing On My Mac (aka Mail) AND my mac email address where all of my folders are located...
does this make sense? Its a small issue but so annoying. I want to go back to the view it was at originally, pulling everything off of my .mac mail account and showing it as my only MAIL account on the computer.
Please let me know if you can tell me what i did, i've looked everywhere. Thks.
iBook G4 Mac OS X (10.4.9)

Here’s an explanation of how mailboxes are supposed to appear in Mail that I’ve posted in other cases. I believe that #10 is the only paragraph below that doesn’t apply to you, so you may want to read the rest and post back with any further questions you may have:
1. Instead of grouping mailboxes by account, Mail groups mailboxes by purpose first, regardless of whether they are stored locally or on the server, then groups by account the mailboxes that don’t serve a specific purpose in Mail. If you have more than one mail account, each has its own Inbox, Drafts, Sent, Trash and Junk mailboxes, which appear under the respective group showing the account name instead of the real name of the associated mailbox in the filesystem.
This has the advantage of letting you choose at any time, and independently for each mailbox, whether you want to look at your Inbox, Sent, Trash, etc. mailboxes as if you had just one of them shared by all accounts (i.e. an aggregate), or look at each of the corresponding individual mailboxes separately.
2. Each mailbox under a pre-defined group is associated with a mailbox in the filesystem whose name may or may not be exactly the same as the name of the corresponding mailbox group. By default, the name of the actual mailboxes in the filesystem associated with Sent and Trash, for example, would be Sent Messages and Deleted Messages, respectively.
3. The association between a mailbox in a pre-defined group and the actual mailbox in the filesystem is fixed for POP accounts, but can be changed for IMAP accounts by means of Mailbox > Use This Mailbox For or the corresponding Preferences > Accounts > Mailbox Behaviors > Store messages on the server setting.
4. Mail may defer the creation of a pre-defined mailbox until actually needed to store messages there. Also, in some circumstances Mail may be unable to create or locate the actual mailbox in the filesystem (see #10 below for an example), but the association does still exist in those cases from a logical point of view, even though Mail may be unable to display or store messages there.
5. Each and every mailbox appears once and only once in the mailbox list, be it (1) under one of the pre-defined groups with an icon that conveys its purpose and the name of the account it belongs to (if you have more than one mail account), or (2) with a generic folder icon and the real name of the associated mailbox in the filesystem if it serves no specific purpose as far as Mail goes. Under no circumstances can the same mailbox appear both ways; it’s either one or the other, depending solely on whether it serves a specific purpose in Mail or it’s treated by Mail as a generic mailbox like any other.
6. By itself, the name of the mailbox is no indication of whether it serves a purpose in Mail. If it appears in Mail with a generic folder icon, then as far as Mail goes it’s a generic mailbox like any other, no matter what its name.
7. For IMAP accounts, a mailbox with a generic folder icon can “disappear” and become associated with one of the pre-defined groups as a result of changing the corresponding Store messages on the server setting in Preferences > Accounts > Mailbox Behaviors or doing Mailbox > Use This Mailbox For on it (server-stored mailboxes only). This, in turn, would cause the mailbox being previously used for that purpose to become dissociated from the corresponding group and “appear” as a mailbox with a generic folder icon.
8. In addition to the account-specific mailboxes that appear with the account name under each of the pre-defined groups, Trash and Junk may also have an “On My Mac” mailbox. This is where messages deleted or marked as junk are moved if they were previously stored in a custom “On My Mac” mailbox or in a locally stored mailbox associated with an IMAP account (i.e. a mailbox for which Store messages on the server has been turned OFF in Preferences > Accounts > Mailbox Behaviors).
9. Generic mailboxes that don’t serve a specific purpose as far as Mail goes (i.e. mailboxes that appear in Mail with a generic folder icon), appear below the pre-defined groups. In principle, “On My Mac” mailboxes (i.e. locally stored custom mailboxes) would appear as top-level folders, whereas server-stored mailboxes would appear grouped under a globe icon for each IMAP or .Mac account. However, if there is no need to differentiate between “On My Mac” and server-stored mailboxes (e.g. because you only have one IMAP account and no custom “On My Mac” mailboxes), Mail will display the server-stored mailboxes as top-level folders instead, just as if they were “On My Mac” mailboxes.
Note: In Mail 1.x, generic mailboxes always appeared grouped, never as top level folders. “On My Mac” mailboxes, in particular, appeared under their own On My Mac group. In Mail 2.x, this changed to offer greater flexibility in how the user wants his/her custom mailboxes to be organized — see Mail Help’s “My mailbox organization was lost after upgrading Mac OS X” article. This allows the user to have multiple top-level “On My Mac” hierarchies, for example.
10. Some IMAP accounts use a NAMESPACE feature that Mail doesn’t handle properly and that causes server-stored mailboxes to appear as subfolders of the account’s Inbox, even though they really aren’t — see “Can't create folders, only subfolders of INBOX” in the Courier FAQ, for example. Those IMAP accounts require INBOX to be typed in Preferences > Accounts > Advanced > IMAP Path Prefix for Mail to handle them properly.

Please Help - Mail 4.3 will receive fine but not send

Everything is the same; my computer has been working totally fine for over a year. All the settings are just as they were...But for the last week it keeps coming up with this message: "Cannot send message using the smtp.live.com" Sometimes it would do this then work again straight away.
I'm in the process of updating to OS X10.6.6 to see if that helps, but don't have enough internet credit so have to use it at work at lunch times.
I can go thru the hotmail webpage and get my mail that way, also my iphone is sending and receiving fine too. But I prefer my Mac!! Any suggestions? Normally I can find answers to my problems straight away with just a quick search but I'm totally stuck on this one
I've tried - deleting all info & re entering it
-someone suggested an outgoing server of smtp.hotmail.com
-setting outgoing server to "none" which for some reason used to work
I'm wondering if hotmail is causing it to stuff up, so I have to go thru their site, thus see their advertising, they get money etc?
thanks in advance!!

This message would indicate that you have this SMTP set up without Authentication, which if that is the case it is also likely getting presented on Port 25, which most connection providers block.
Change the SMTP to Password authentication, SSL, and change to Use Custom Port and enter 587 -- this prevents Mail for some temporary issue changing to use another of the default ports.
Let me know if this solves.
Ernie

PLEASE HELP. shell/tcp: bind: Address already in use

Hi,
I am getting theses messages every 10 minutes and I don't know why.
Feb 17 03:17:21 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:17:21 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 03:27:22 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:27:22 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 03:37:22 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:37:23 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 03:47:24 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:47:24 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 03:57:26 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:57:26 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:07:26 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 04:07:26 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:17:27 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 04:17:27 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:27:29 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 04:27:29 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:37:30 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 04:37:30 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:47:30 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
The only strange thing that I see is that in /etc/inetd.conf
there are theses lines:
shell stream tcp nowait root /usr/sbin/in.rshd in.rshd
shell stream tcp6 nowait root /usr/sbin/in.rshd in.rshd
exec stream tcp nowait root /usr/sbin/in.rexecd in.rexecd
exec stream tcp6 nowait root /usr/sbin/in.rexecd in.rexecd
But I haven't enabled IPv6 on my system.
I also have this message at random time:
Feb 18 18:43:46 MONTSENY inetd[157]: [ID 268928 daemon.error] rusersd/rpc/datagram_v,circuit_v: could not get transport information
Feb 18 18:43:46 MONTSENY inetd[157]: [ID 307641 daemon.error] rusersd/rpc/datagram_v,circuit_v: tli_socket: No such file or director
There is only one instance of inetd running.
I haven't installed any additional services. At the beginning things went ok I think that the problem started when I added an IP address to the second eth interface.
The system is a Sun Netra T1.
The system version is: Solaris 8.
Please reply also to: [email protected]
Thanks in advance.

Hi,
I am getting theses messages every 10 minutes and I don't know why.
Feb 17 03:17:21 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:17:21 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 03:27:22 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:27:22 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 03:37:22 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:37:23 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 03:47:24 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:47:24 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 03:57:26 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:57:26 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:07:26 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 04:07:26 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:17:27 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 04:17:27 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:27:29 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 04:27:29 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:37:30 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 04:37:30 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:47:30 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
The only strange thing that I see is that in /etc/inetd.conf
there are theses lines:
shell stream tcp nowait root /usr/sbin/in.rshd in.rshd
shell stream tcp6 nowait root /usr/sbin/in.rshd in.rshd
exec stream tcp nowait root /usr/sbin/in.rexecd in.rexecd
exec stream tcp6 nowait root /usr/sbin/in.rexecd in.rexecd
But I haven't enabled IPv6 on my system.
I also have this message at random time:
Feb 18 18:43:46 MONTSENY inetd[157]: [ID 268928 daemon.error] rusersd/rpc/datagram_v,circuit_v: could not get transport information
Feb 18 18:43:46 MONTSENY inetd[157]: [ID 307641 daemon.error] rusersd/rpc/datagram_v,circuit_v: tli_socket: No such file or director
There is only one instance of inetd running.
I haven't installed any additional services. At the beginning things went ok I think that the problem started when I added an IP address to the second eth interface.
The system is a Sun Netra T1.
The system version is: Solaris 8.
Please reply also to: [email protected]
Thanks in advance.

Please help - mail wont stop pushing

I've read several places that to save battery life, disable push.
Well I have disabled push. My yahoo mail is set to fetch, 30 min. Also advanced is set to fetch. And the push "slider" is off.
However, I still get mail pushed down within minutes.
I want to maximize battery and don't feel the need to have it pushed right away. 30 min would be fine.
I've looked allover and cannot find resolution. Can someone clear this up for me?
Thank you.

I understand, however it does it even while the mail app is not open.
I've heard some apps say running in the background. Is it possible its leaving the program open? If so, would that cause it?
I dont think so because just because its open (if it even is) then why would it constantly fetch?
Either way, push IS off, and I get email instantly. I have set to 30 and 60 min with no change.
Thanks

Please Help - Mail Application Erased

I am trying to move all of my info from Entourage to Mac Mail because I just bought an iphone. Somehow my Mac mail application has been erased. I don't have an original system boot disk. How can I replace the mail application? I am running 10.4.11 on a Powerbook G4 laptop. Thanks!

Hi Jay, and a warm welcome to the forums!
You need those install discs, or another Mac with it. Downloads are only updates.
Custom installs in Mac OS X 10.4...
http://docs.info.apple.com/article.html?artnum=301229
"Here's a list of all the custom installation options available with Optional Installs.mpkg:
* Applications
o Address Book 4.0
o iCal 2.0
o iChat 3.0
o iTunes 4.7.1
o Mail 2.0
o Oxford Dictionaries
o Safari 2.0
o X11"

I have installed 12c Release 4 cloud control in RHEL 6.5 and now trying add target in that setup. I am facing the below issue in the installation . Please help me if anybody have already faced this error

2015-02-16_20-08-17:INFO:exit-code: 0
2015-02-16_20-08-17:INFO:pdp command with shell out /usr/bin/sudo -u oracle /bin/sh -c '(cd /agent12c/oem/core/12.1.0.4.0/cfgtoollogs && /agent12c/oem/core/12.1.0.4.0/bin/zip -q -r /tmp/remoteArchivesADXD2VSR1034_mgt2015-02-16_08-07-11-PM.zip * )'
2015-02-16_20-08-17:INFO:Action de@@@scription Execution of command /usr/bin/sudo -u oracle /bin/sh -c '(cd /agent12c/oem/core/12.1.0.4.0/cfgtoollogs && /agent12c/oem/core/12.1.0.4.0/bin/zip -q -r /tmp/remoteArchivesADXD2VSR1034_mgt2015-02-16_08-07-11-PM.zip * )' on host ADXD2VSR1034_mgt
2015-02-16_20-08-17:INFO:Attempt :1 pty required false with inputs
2015-02-16_20-09-23:INFO:/usr/bin/sudo -u oracle /bin/sh -c '(cd /agent12c/oem/core/12.1.0.4.0/cfgtoollogs && /agent12c/oem/core/12.1.0.4.0/bin/zip -q -r /tmp/remoteArchivesADXD2VSR1034_mgt2015-02-16_08-07-11-PM.zip * )' execution failed on host ADXD2VSR1034_mgt
2015-02-16_20-09-23:INFO: OUT null
2015-02-16_20-09-23:INFO: ERR /bin/sh: line 1: /agent12c/oem/core/12.1.0.4.0/bin/zip: not found
2015-02-16_20-09-23:INFO: EXIT CODE127
2015-02-16_20-09-23:INFO: ACTION Execution of command (cd /agent12c/oem/core/12.1.0.4.0/cfgtoollogs && /agent12c/oem/core/12.1.0.4.0/bin/zip -q -r /tmp/remoteArchivesADXD2VSR1034_mgt2015-02-16_08-07-11-PM.zip * ) on host ADXD2VSR1034_mgt
2015-02-16_20-09-23:INFO:InvocationTargetException Exception
2015-02-16_20-09-23:INFO:Printing Exception :java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.sysman.core.agentpush.ui.deployer.BaseDeployerOps.executeActions(BaseDeployerOps.java:1924)
    at oracle.sysman.core.agentpush.ui.deployer.NewAgentDeployer.deploy(NewAgentDeployer.java:59)
    at oracle.sysman.core.agentpush.ui.deployfwk.DeploymentWorker.run(DeploymentWorker.java:26)
    at oracle.sysman.util.threadPoolManager.WorkerThread.run(Worker.java:311)
Caused by: CommandException: err: /bin/sh: line 1: /agent12c/oem/core/12.1.0.4.0/bin/zip: not found
out: null exitcode: 127
stacktrace:
null
    at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCommandOnNodeInteractive(DeployerOps.java:1204)
    at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCommandOnNodeInteractiveUsingRunAs(DeployerOps.java:1026)
    at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCommandOnNodeInteractiveUsingRunAs(DeployerOps.java:912)
    at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCmdOnNode(DeployerOps.java:638)
    at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCmdOnNode(DeployerOps.java:588)
    at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.copyDirFromNode(DeployerOps.java:484)
    at oracle.sysman.core.agentpush.ui.deployer.BaseDeployerOps.doCollectLog(BaseDeployerOps.java:1038)
    ... 8 more
2015-02-16_20-09-23:INFO:=========Command Exception :Error Message:/bin/sh: line 1: /agent12c/oem/core/12.1.0.4.0/bin/zip: not found
<br><br> Exit Code :127
2015-02-16_20-09-23:INFO:Updating Action CollectLogwith Status FAILED and error Message :Error Message:/bin/sh: line 1: /agent12c/oem/core/12.1.0.4.0/bin/zip: not found
<br><br> Exit Code :127 and problem Execution of command (cd /agent12c/oem/core/12.1.0.4.0/cfgtoollogs && /agent12c/oem/core/12.1.0.4.0/bin/zip -q -r /tmp/remoteArchivesADXD2VSR1034_mgt2015-02-16_08-07-11-PM.zip * ) on host ADXD2VSR1034_mgt Failed and recommendation Not Available
2015-02-16_20-09-23:INFO:=================action status is not empty FAILED
2015-02-16_20-09-23:INFO:Breaking since the action has failed
2015-02-16_20-09-23:INFO:Skipping action Cleanup since some previous step has failed
2015-02-16_20-09-23:INFO:The following action failedInstall
2015-02-16_20-09-23:INFO:TIME TAKEN by NewAgentDeployer on host ADXD2VSR1034_mgt is 0: hrs 5: mins 39 sec
2015-02-16_20-09-23:INFO:PERF:HOSTNAME:ADXD2VSR1034_mgt:NewAgentDeployer_EXECUTION_TIME:339774
2015-02-16_20-09-23:INFO:HOST:ADXD2VSR1034_mgt
2015-02-16_20-09-23:INFO:Destroying Logger
2015-02-16_20-09-23:INFO:======================================New Agent Deployer END ====================================
2015-02-16_20-09-23:INFO:Clearing EMSecurityContext EMExecutionContext in BaseDeployerOps

if you see the log clearly you see
2015-02-16_20-09-23:INFO: ERR /bin/sh: line 1: /agent12c/oem/core/12.1.0.4.0/bin/zip: not found
unable to unzip the file - check the zip file location in server - "which zip"

HT4910 Good Day. Please help me get an icloud customer service email address. I have forgotten my password and Apple ID. My iphone needs that password i order to function. It all started after updating my software to Ios7.

Good Day
Can anyone help me get icloud customer service help email address? I need to contact them to help me reset my password.
I cant use my iPhone since upgrading to Ios7
Thank you in advance
Moagi.(RSA)
<E-mail Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. No-one is goingto email you.
Go to http://iforgot.apple.com and sign in with your iCloud login. A new password will be sent to your associated email address. If this doesn't work you will have to contact Support. Go to https://getsupport.apple.com; click' See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password'.

Whenever i or anyone else close the mozilla browser and later try to open it i always keep being told that the browser is still operating and will not re-open. if anyone can please help or explain it to me my email is *********@*******.***

this happens every time i close my browser and try to reopen it, whether I'm opening it 1 minute later or 10 hours later. Every time i have to open my start task manager and end process.

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

Mail authentication problem - PLEASE HELP

I was trying to set up my email account on my new Droid phone. Apparently, it requires that the incoming mail server use authentication. I went into my Mac Mail account settings and changed the Advanced setting to Password. Now I can't receive any mail (though I can send). I also can't UNDO this change, None is no longer an option on the drop down menu. WHAT?
Please help. I tried adding a new email account, by my Mac tells me there's already and account with that email address and gives me no options for deleting/starting over.

William Boyd, Jr. wrote:
AnnetteG wrote:
That is the case, assuming you picked "Edit Serve List" from the "Outgoing Mail Server" list, then selected your SMTP server. I'm not surprised that you had "Authentication" for the outgoing mail server set to "None". If your broadband account is like mine, authentication depends on you being connected through the ISP's connection. Is that the entry you were unable to set to "None"?
Yes, that's correct.
The settings for incoming mail servers are just above the field for "Outgoing Mail Server". The type of security is declared under the "Advanced" tab. Is the password declared there the correct one for your incoming e-mail?
Yes.
That's normal. Why do you want anything different?
I meant that now I have two mailboxes and the new 'working' mailbox takes much longer to fetch new emails. I don't understand why changing the settings in the old mailbox doesn't fix the problem, and why I can't delete or change the new mailbox. I created it in haste and it doesn't show my name correctly. Yes, its a small annoyance at this point but I'm baffled as to why I now have two sort of mailboxes and why none of my edits worked (yet entering the exact same info in a new box did). Seems like Mail is f*ed up and there's no convenient way to reinstall.
Anyway, thanks for the help, I'm moving on.

Large attachment in mail stalls the application. Please help!

I accidentally tried to send a 10mb email. I realized the issue immediately and tried to delete the email from Outbox, which didn't show up till later. And when it did I deleted the large email in the Outbox. Or so I thought.
Next, my Internet got knocked out at some point and I had to reconnect.
Now, I'm back on line. Mail is not working at all on its own. When I try to send a test mail to myself, the Sent button gets busy and it reproduces the same copy of the 10mb email under On My Mac category and in Sent Messages. And my test email would sit in the Outbox.
Meanwhile nothing else is working. I have no mail coming in and obviously cannot send anything out. Please help.
BTW, I have already tried to go into Finder/home/library/Mail and tried deleting Outbox.mbox and Sent Messages.mbox. When I relaunch Mail, the same problem persists.
If you know how to fix this, I would love to know. Thanks!

Hello leaflet:
Try a couple of things:
Select the mailbox giving you problems. Select mailbox>rebuild from the drop down menu.
If that does not help, move the preference file (com.apple.mail.plist) to the trash. Do not empty the trash just yet. Restart mail and see if the problem is corrected. You will need to reenter your personal preferences.
Barry

PLEASE HELP! Mail recieving thousands of already recieved emails...

Similar Messages

Maybe you are looking for