Please help major problems

I have a p4 2.8ghz northwood, msi 865pe platinum, 1gb corsair 400 3200 c2pro, 9800xt, but have swapped for 9700 pro and get same problems.
Firstly i was playing lineage and the game had corrupted textures a lot, this had never happened before, this soon spread to windows and the desktop and start bar were most affected and were majorly fecked, not long after the bios was pink and so was memtest with smileys also in pink. Now the computer also turns itself on when power is 1st connected, and sometimes the video card outputs nothing. Also the corsair ram leds, have not come on sometimes, this coincides with one of the other problems i am sure.
please help

Please post your power supply specs - see here: Moan Guide
You should also run Memtest86

Similar Messages

Please Help | Major Problems | Lost Job/Need Fix

Hello guys, I have an Early 2011 Macbook Pro with many problems and I don't know where to begin. There are so many things that Ill just list a few to get started.
Here are my specs:
MacBook Pro (15-inch, Early 2011)
2.2 GHz Intel Core i7
8 GB 1067 MHz DDR3
Intel HD Graphics 3000 512 MB
NOTE: about a week ago I reinstalled the OS to fix a problem temporarily Ive been out of work for 3 months now because of these problems and am now out of money so I cannon afford to take it to a shop or the Apple store for fixing. If I cant get this fixed ill be unable to start my work again and that would be terrible.
SOME PROBLEMS TO START: I really need someone/something to look at my computer and determine ALL the problems with it both internal hardware and also within the OS itself.
*The core of all this is that i NEED windows 7 installed on my mac for work and bootcamp wont allow me to do it for some reason, I also don't want it installed virtually. I want windows installed cleanly. If i could install windows in place of the Mac os and then bootcamp Mac OS I would rather do that.
- Console has so many errors its crazy.
- Computer randomly restarts when I play games or am watching a movie
- I CANNOT install Windows 7 via bootcamp or any other method
- My Optical Drive failed so I have removed it so my only option is to install windows via a usb drive
- For some reason my External HDD that I save everything on now all of a sudden wont read.
- Disk Utility reads it and if i verify it and repair it it tells me everything is ok but then also reads that its updating drivers but nothing ever happens
I THINK IF I CAN GET THESE PROBLEMS FIXED THEN THE OTHERS MIGHT GO AWAY
Please respond asap as every minute my laptop sits like this is another dollar that I am losing

Make an appointment at an Apple store genius bar and have them test you MBP and define what is exactly wrong with it. The evaluation will be FREE!
Ciao.

.problem is that icon of iblacklist in i tune is "disc phone" like One, named iblacklist, but on screen appear as "secret contact" not as iblacklist icon wich is contact like icon .please help . iblacklist problem still , I download it again ,this was

.problem is that icon of iblacklist in i tune is "disc phone" like One, named iblacklist, but on screen appear as "secret contact" not as iblacklist icon wich is contact like icon .please help .
iblacklist problem still , I download it again ,this was not helpfull

Have you read my reply to one of your duplicate threads : https://discussions.apple.com/message/22774845#22774845 ?

PLEASE HELP : Major IPOD Problem

Please Help:
Recently I downloaded the new Itunes(Itunes 7). After downloading it I was prompted to upgrade my Ipod (30g Video) to the new system (1.2). Almost immediatly after finishing this download my Ipod turned off, and is now frozen and will not turn on. Also, my computer doesn't recognize when my Ipod is plugged in, nor does the "Do not disconnect" screen come up, my Ipod stays blank. I called Apple they told me that I can send in my Ipod for it to be fixed, but the hard drive on the Ipod will be wiped. I recently bought a new computer and do not have any of my songs in my library, this is over 2000 (2000 + dollars) songs I have bought that I am currently on the verge of losing.
I have tried various USB ports, two different computers, restarting my Ipod, talking to apple technichal support, putting my Ipod into disk mode, manually trying to get the compter to recognize the Ipod through the manager, and smashing on my desk out of anger hoping that something might happen (just kdding). I believe thats everything, any other ideas you have are greatly appreciated.
If anybody has any ideas on how can get my computer to recognize the Ipod is plugged in so I can back up all the songs (via my computer, ipod...copy all music files) would be greatly appreciated, that way when I send in my Ipod and then get it back, I can put my songs back on.
Thank you in advance!
Windows Windows XP

one thing that you can try is something my dad taught me. This works great especiall if you have a PC.
When i had to replace my laptop and was worried about losing all of my purchased songs from itunes, i was told to plug the ipod into the computer BEFORE installing itunes. it will read on your computer as a mass storage device and then all you need to do is simply go into the folders and copy all of the files into your "my music" folder (or whatever folder you choose). After that, you need to install/reinstall itunes and when it searches your computer for music, ALL of your music (including purchased songs) will show up and all will be okay.
Just a few hints;
although this seems very simple, if you're a simple person like i am, you'll expect to see the songs on your ipod show up with normal/regular titles.....THEY WONT. They'll show up as letter-number combinations, but the music is all there.
In short;
1. uninstall/delete itunes
2. Plug in our ipod (but don't reinstall itunes yet)
3. copy ALL of the files you can find on your ipod
4. reinstall itunes
5. let it search your computer for music
you should be fine at this point.
I hope this helps!

HELP PLEASE! Major Problem with FCP Project

OK I am starting to panic. I was editing a wedding video for a client on this 150GB proMAX external hard drive. Everything as fine until this morning. Now when I go to open the project I always get a fatal error.
What happens is the project begins to load but then gets to one unrendered point on my timeline and it just hangs. I get that spinning ball of death and I'm not sure why. Then the program "quits unexpectedly." I have tried this several times and consistently get the same result.
I have tried opening this project on my MacBook and the same thing occurs. Can anyone PLEASE help me with this issue? I would appreciate any help

sounds like a corrupted clip.
disconnect the proMAX drive first, then open the project.
when the project has opened (with all media offline) then reconnect and mount the proMAX drive.
now you can start to reconnect the media ... but do it in parts, not all in one go. by a gradual process you should eventually discover which clip is causing the crash .... when you find out the corrupt clip, recapture from source.
good luck
Andy

Please Help! Problems with Windows Vista 32-bit on Boot Camp (Wireless/Etc)

We recently purchased a new aluminum Mac Book (13 inch) with Leopard (10.5.4). I attempted to install Boot Camp and Windows Vista 32-bit. I can successfully alternate between both operating systems with no problems. However, I am having 2 problems:
1) I cannot connect to wireless internet. No connections will even show up when I attempt to connect, its almost as if an adapter hasn't been installed.
2) I cannot set up the trackpad to do right click.
I've read articles everywhere and nothing has helped. Can anybody please help me??? Any support/advice is greatly appreciated. Thanks in advance!
- Pierce

dpierceNKC:
Welcome to the Apple discussions.
It appears that you may not have installed the boot camp drivers. Boot into Windows and insert your Leopard installation disk in the CD/DVD drive. This should automatically begin installation of the necessary drivers. Reboot the computer when instructed and all the hardware should work as designed.
The right click is accomplished by placing two fingers on the trackpad and then depressing the trackpad button. This should also work after the drivers are installed as instructed above.
Axel F.

Please help-image problem (display)

Can someone please help with this?
I keep receiving an error (below) while trying to execute the code...
2001-07-19 11:55:02 - Ctx( /dev ): IOException in: R( /dev + /servlet/getImage + null) Connection reset by peer: socket write error
My setup is Tomcat 3.2
JDBC: Oracle's classes12.zip
JDK: Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.0-C)
Java HotSpot(TM) Client VM (build 1.3.0-C, mixed mode)
I have copied my simple code below for review:
package lmmfcd.images;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.sql.*;
import javax.servlet.jsp.*;
import javax.servlet.jsp.tagext.*;
import org.apache.jasper.runtime.*;
import java.beans.*;
import org.apache.jasper.JasperException;
public class getImages extends HttpServlet
     public void doGet(HttpServletRequest request, HttpServletResponse response)
               throws ServletException, IOException
          //Grabs and assigns the PageContext
               JspFactory _jspxFactory = null;
               PageContext pageContext = null;
               Object page = this;
               _jspxFactory = JspFactory.getDefaultFactory();
               pageContext = _jspxFactory.getPageContext(this, request, response,
                    "", true, 8192, true);
          //End of the PageContext Stuff
          Connection conn = (Connection)pageContext.findAttribute("conn");
               try
                    ResultSet rset = null;
                    String queryCmd =
                              "SELECT     image "+
                              "FROM          sgps.images "+
                              "WHERE          pn = '13507028' "+
                              " AND          pic_num = '1' ";
                    Statement stmt = conn.createStatement();
                    rset = stmt.executeQuery(queryCmd);
                    rset.next();
                    Blob blob = null;
                    blob = rset.getBlob("image");
                    response.setContentType("image/jpeg");
                    byte[] ba = blob.getBytes(1, (int)blob.length());
                    System.out.println("just above OutputStream");
                    response.getOutputStream().write(ba, 0, ba.length);
                    response.getOutputStream().flush();
                    response.getOutputStream().close();
               catch(SQLException e)
                    throw new ServletException("Problem");
}

It compiled okay, but still displayed the broken image as the result....
          if (rset != null)
               try
                    BLOB blob = null;
                    blob = (BLOB)rset.getObject("image");
                    response.setContentType("image/jpeg");
                    InputStream in = rset.getBinaryStream("image");
                    //Have also used:
                    //InputStream in = blob.getBinaryStream();
                    OutputStream out = response.getOutputStream();
                    byte b;
                    while ((b = (byte)in.read()) != 1)
                         out.write(b);
                    in.close();
                    out.flush();
                    out.close();
               catch(SQLException e)
                    throw new ServletException("Problem");
          }

Please Help Printer Problems

I have just bought an Airport Extreme Base Station. I have a Mac Book, iBook G3 and a Win XP Laptop that I have so far connected to the network.
On the base station itself I have a Western Digital My Book External Hard Drive and an HP Photosmart C4180 all in one printer connected via a USB hub.
All the computers can see the external hard drive but I can only get the Win XP Laptop to print. The two Apple laptops will not print.
One last thing all my computers connected to the internet wirelessly via my BT Fusion Home Hub before buying the base station. When I first installed the base station I connected the WAN port to the BT hub. As far as the base station is telling me everything must be setup right as I have the solid green light.
What am I doing wrong. Please help I love Apple products and really do not want to send this back.

I'd like to suggest you go to www.tune-up.com and download and install this program.
You get a 30 day free trial to start. If you sign up as a reseller you can get the program for $29 after that.
I'm not an employee of the company but I just recommend the program as it has fixed many a friends
problems and has kept my computers and my familys computers running straight and clean with no problems.
Even if you don't buy the program after using it and it fixes your problems you can uninstall it and consider it a blessing.
I'm sure once you see what it can do you will think twice to buy it.
Other than that, I don't know much about your system to even begin to try to tell you what to do as a troubleshooter.
It could be any number of things that are wrong with it. Number one, the registry might be really messed up.
Tune-up will fix that fix off for you. A computer is like a car, it has to be kept in tune in order to keep running right.
Another problem area is malware and viruses. We all know about them but do we ever really know if we might have been bit
by any of them. Most times not until something serious causes us problems. Can I suggest another program you might try?
AVG Internet Security 2011 at www.avg.com. It's another 30 day free trial program. I am also a reseller and have all my computers
and family members registered and using it.
I can tell you that with only these two programs installed on your computer you can rest easy and use your computer without any fears or problems. Let me know how it goes for you. Good luck.
Paul Streicher
Tampa, FL

Please help. proxy problem

Hi there,
I am facing a problem in accessing net content. I am using proxy to get net access.
here is my code:
Properties props=System.getProperties();
props.put("proxySet", "true");
props.setProperty( "proxyHost", "192.168.6.22" );
props.setProperty( "proxyPort", "80" );
props.setProperty( "proxyUser", "mv5217" );
props.setProperty( "proxyPassword", "surya" );
System.setProperties(props);
     String content="";
     URL url = new URL("http://www.rediff.com");//ew URL("http://www.yahoo.com");
BufferedReader in = new BufferedReader(new InputStreamReader(url.openStream()));
     String inputLine;
     while ((inputLine = in.readLine()) != null)
     content+=inputLine;
     in.close();
     System.out.println("Content "+content);
}catch(Exception e){
e.printStackTrace();
the above code some time returns me blank string and some times below exception
java.io.IOException: Server returned HTTP response code: 407 for URL: http://www.rediff.com
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:558)
     at java.net.URL.openStream(URL.java:851)
     at TestingClass.<init>(TestingClass.java:26)
     at TestingClass.main(TestingClass.java:40)
I am getting the exception even sending a mail to yahoo pop server. below is the my java mail code.
public static String MAIL_HOST = "smtp.mail.yahoo.com";
public static String MAIL_HOST2 = "pop.mail.yahoo.com";
* Constructor
public JavaMailToYahooServer() {
String from = "[email protected]";
String subject = "Testing of sending mail";
String body = "this is the mail content";
String to = "[email protected]";
MAIL_FROM = from;
MAIL_SUBJECT=subject;
MAIL_BODY=body;
MAIL_TO=to;
Properties props = System.getProperties();
props.put("proxySet", "true");
props.put("proxyHost", "192.168.6.22");
props.put("proxyPort", "80");
props.put("proxyUser", "proxy user id");
props.put("proxyPassword", "proxy password");
//Properties props = new Properties();
props.put("mail.smtp.host", MAIL_HOST);
System.setProperties(props);
Session sess = Session.getDefaultInstance(props, null);
try {
// Connect to host
//Store store = sess.getStore("pop3");
//store.connect(MAIL_HOST2, -1, "vmeghraj", "surya");
// Create a message
Message msg = new MimeMessage(sess);
msg.setFrom(new InternetAddress(from));
InternetAddress[] address = {new InternetAddress(to)};
msg.setRecipients(Message.RecipientType.TO, address);
msg.setSubject(subject);
msg.setSentDate(new Date());
msg.setContent(body, "text/html; charset=ISO-8859-1");//HTML type
//msg.setContent(body); //Text type
// Send the message
Transport trans = sess.getTransport("smtp");
trans.connect(MAIL_HOST,"my yahoo id","my yahoo password");
trans.send(msg);
// Let the user know that the mail was sent
trans.close();
}catch (Exception ex) {
System.out.println("Errorr : "+ex);
for this I am gettin below shown Exception
Errorr : javax.mail.MessagingException: Unknown SMTP host: smtp.mail.yahoo.com;
nested exception is:
     java.net.UnknownHostException: smtp.mail.yahoo.com
What wrong I am doing in the above coding..
Please help me .... it is an urgent requirement
thanks in advance,
Veerendar

refresh

Please Help, Mobo problems

Hello all, i have the new K8N neo platinum nforce3 motherboard and it has been working fine up until today when i attempted to install a stick of 256mb of PC2700 memory. After i installed the memory properly, i attempted to boot up my computer and i got the Diagnostic Sound of RAM problem. Nothing is showing up on my screen so i cant enter BIOS or CMOS. Please help i need my computer back asap

I cannot even get into BIOS. I boot up and get a blank screen and the diagnostic sound So tried to reset the jumper and that didnt work...my only other solution is that i get a few sticks of PC3200 memory. Another suggestion i hvae recieved was that i fractured my motherboard. Possibly a little hairline fracture in my motherboard that would render it useless. But why would my motherboard turn on if it was fractured? doesnt make sense. Computer powers on, but no visual on the screen and Diagnostic sound indicating a RAM problem.

Please help username problems!

My blackberry curve9300 has a username attached to the device which isnt even a email address so i cant change it! I have tried accessing my blackberry id to update my apps but i cant as my username is incorrect! I have created a new blackberry id on my laptop but my blackberry wont accept it as it isnt linked to my device! please help i will be eternally grateful!

Hi casharding
Welcome to BlackBerry Support Forums
We Can reset our BBID password and even the Username , but if the username or the email is incorrect or invalid then you have very limited Options. Have to create a new BlackBerry ID but in this process you will loose access to any of your paid apps.
Changing the BlackBerry ID on web itself will solve this issue.So first do a Backup of your device using Desktop Software or refer to this helpful article : How To Backup Your BlackBerry
When you are done follow this Knowledege Base to resolve the issue:
KB26694 : How to change the BlackBerry ID on a BlackBerry PlayBook tablet or BlackBerry smartphone.
Try it and let us know of your progress.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Please help Install problems

I boot from CD run through the sun boot part ok.
Then i select to boot from my CD at the end. THis works fine.
It then starts to load sunOs 2.8 but restarts very shortly after and does'nt give me a chance to read error message.
I tryed loads of different configs with no sucess Please help.
The system i run is a p4 wit intels G850GB Mainboard geforce2, 128MB PC 800

P4, seems not supported yet. Try to look into the
Solaris Intel forum next to this. Some discussions
about P4 already. Maybe you will find what you want.Indeed.
Have a look at
http://groups.google.com/groups?q=solaris+p4+setup_mca+kadb&hl=en&lr=&safe=off&site=groups
these usenet articles give a procedure to boot solaris 8
on a P4 cpu.
Once you've got the system installed using the kadb
procedure given above you should try to install the latest
kernel patch 108529-08 that fixes problem solaris has with
these P4 cpus.

Please Help, Numerous Problems

Had a problematic iPod not being recognized by windows, resetted, remformmated everything. Sent it back, got a new one. reinstalled itunes, reinstalled ipod update, same problem. Only now, it's stuck on do not disconnect whenever plugged in and whenever not plugged in displays the exclamation and folder with www.apple.com/ipod/support written underneath. Please help me, i am really upset as I have been having these problems for a long time

Well, I've now gotten back to the point where it's the iTunes problem again, my pc recognizes that my ipod is plugged in, but iTunes doesn't. And I tried updating the software, but it says that the ipod isn't supported.
I guess this makes me more certain that I'm going to switch to OS X and get a powerbook. I highly doubt that Macs have these problems with ipods. I guess I could get mad at Apple and say it's their fault, but my guess is it's a software issue, one relating to XP, oh well.

Please HELP! Problems booting K8N Neo2 Plat.

Hey peeps,
I've been having major problems with getting my system to work with the Neo2. My first board worked ok and I finished installing windows and switched it off for the night. Then about 3 hrs later it TURNS ITSELF ON... and the power supply blows up. I returned both and now I've just rebuilt the system. Worked fine for a few hours... went to sleep and woke up when my power LED on my case started flashing for no reason. Now the computer won't boot. I just get the power LED flashing. I'm REALLY annoyed at this board cos it's been giving me no end of problems with my Audigy as well. My specs are below. ANY help would be appreciated cos I only have today to resolve this problem.
Athlon 64 3500+
1GB Crucial Ballistix
Tagan 480W PSU
Galaxy GeForce 6800GT
-Viper-

Tagan PSU bad...very bad.
How bad?
BAD BAD BAD BAD BAD BAD BAD BAD BAD BAD
Seriously though, I would supect The Tagan PSU first because those things are loose cannons.
Hope this helps.

PLEASE, PLEASE HELP: Big problems with my Zen Touch. (Firmware/driver issu

So here's the deal:
Last night I thought I'd finally take the time to upgrade my Zen Touch to 2. from .3 or something like that. I noticed that there was a warning saying that this was no small upgrade, and that I should back up everything I have on it.
I'm glad I did, because now my MP3 player situation is seriously screwed up, big time. During the upgrade process, my computer froze, leaving my Zen Touch without firmware (ok, so firmware version 0.0.0). Upon turning the device on, it boots up in recovery mode. This allows me to either format, clean up, or "reupload" firmware. I've tried all of these options, but the fact is clear that my computer simply will no longer recognize my MP3 player.
It does, however, recognize it at as a generic storage device. However, this isn't enough for me to reinstall the player's firmware unfortunately.
So basically, I can't update driver or firmware right now, because my computer won't acknowlege my Zen Touch!
Somebody please, please help.
I've already tried using the setup file from http://www.jumpingcholla.com/jce_nomad_ZEN.htm.
Seriously, please help!

Sort of success!
I now finally have firmware 2. installed on my Zen Touch! Yeah! I'm not entirely sure how I did it, and I'm not bothering to find out, I'm just glad I finally got it on there.
But some problems still remain. After all this fiddling with my driver and firmware and whatnot, my computer just doesn't see my MP3 the same way as it used to. Before, it was great, all I had to do was plug her in and I could bring up Zen Explorer in Windows Explorer, or organize my stuff in Creative MediaSource.
Now that's not the case. The only way I can sort of add stuff to my player now is by going into Windows Explorer, which is still more or less acknowleging my player as a "portable device". Granted, there is a dri've called "My Zen", but it doesn't bring up Zen Explorer like it used to when I click on it. Furthermore, when I go into MediaSource, I can't select it as a location, there just isn't anything there.
It almost seems as if my computer thinks I'm just using a portable hard dri've. Is there anyway I can tell it that it's an MP3 player, too?
Thanks!

Please help major problems

Similar Messages

Maybe you are looking for