Please HELP ME ACCESS OR DELETE MY RESTRICTIONS PASSCODE COZ' EVERYTIME I ENTER MY RESTRICTIONS PASSCODE IT WILL SAYS.. PASSCODE ATTEMPT FAILED.. I AM ATTEMPTING TO ENTER MY RESTRICTIONS PASSCODE SINCE THIS MORNING AND UNTIL NOW I HAVE ENTERED 13 TIMES...

Please.. HELP ME HOW TO DELETE OR RESET MY RESTRICTIONS PASSCODE BECAUSE EVERYTIME I ENTER MY RESTRICTIONS PASSCODE IT IS ALWAYS PASSCODE ATTEMPT FAILED... I AM STARTING THIS SINCE THIS MORNING BUT UNTIL NOW I CAN'T ACCESS MY RESTRICTIONS PASSCODE... I ENTERED 13 TIMES ALREADY SINCE THIS MORNING... BUT UNTIL NOW ITS USELESS.. I CAN'T VIEW MY OWN BUILT-IN APPS LIKE CAMERA, YOU TUBE, ITUNES, APPS, SAFARI, ICLOUD, TWITTER, FACETIME.... PLEASE HELP ME SOLVE MY PROBLEM ... PLEASE... THANK YOU SO MUCH...

Please turn off your CAPS LOCK, it's considered shouting and therefore rude.
If you have forgotten the restrictions passcode the phone will become locked and the only way to use it again will be to restore the phone to factory settings, which will wipe all data from the phone in the process. After restoring the phone you can then restaore it to the last backup that you made.

Similar Messages

  • I went to make a call this morning, and all my contacts have disappeared! How can I can them back? I only just entered them all the other day, this is my first iphone

    I went to make a call this morning and all my contacts have disappeareed, how do i get them back? This is my first iphone (4s) and i only just entered them all manually 4 days ago! Please help me!

    I entered them directly into my phone. Two days ago, I plugged it into my mac and synced it with itunes, but i didn't sync the contacts and they were still in there after.

  • I tried to Update my Itunes this morning and I now get Runtime Error R6034

    I have tried to Upgrade Itunes this morning and all I am getting now is Runtime Error R6034 can Anyone Help ??

    Am assuming that the upgrade didn't complete which was what happened to me and that now you get this message everytime you start Windows.  I use Windows7
    Apple has published a fix at http://support.apple.com/kb/ts3074.
    In it they suggest the issue may be caused by a bad installation of a version of Microsoft's .NET Framework.
    Find this somewhat preposterous for the simple reason that all was well until the attempt to load the new upgrade of iTunes.  For Apple's suggestion to hold true it can only mean that none of my other applications make any use of MS.NET Framework, which I very much doubt.
    Performed the fix for Windows7 prescribed by Apple, namely downloaded and ran Microsoft's .NET Framework taking the 'Repair' option when prompted.  When Repair completed successfully you have to shut down and restart Windows to make the repaired software available.  Did this and on restart lo and behold the R6034 message appeared again.
    Did a search of the Registry for 'R6034' but not found.
    Being unsure what was issuing the message deleted iTunes and restarted the system.
    Again lo and behold the R6034 message appeared again.
    Had been away from my computer for several weeks, and as the only upgrade actioned since my return was the problem iTunes carried out a Sydney Restore.  This got rid of the R6034 message, everything worked fine, and when I shut down Microsoft automatically reinstalled all its upgrades after the Restore point.
    Then moved to put back the iTunes upgrade prior to the current one, and ITunes stopped me in my tracks by halting the reinstall because "A later version of the program had been installed".
    Appreciate that this doesn't do much for you Barry, but as I see the iTunes upgrade as the problem, I'm hoping firstly that someone from iTunes will read this and firstly, provide more support than it has to date, and secondly, for those who want to pass up on the upgrade allow them to reinstall the previous version of ITunes.
    Cheers.

  • I downloaded the IOS 6.1.2 on my iPad since this morning and I still see the apple icon...

    what do I do when I downloaded IOS 6.1.2 and still have the apple icon on my ipad...I can't turn off my Ipad

    If the above doesn't work, you'll have to force the iPad into Recovery Mode.
    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • Please explain me, how to remove an usb stick or memory chip? With experiences only in pc:s, I do not find on my first apple e.g. MacBook Air a solution. Until now I have succeeded to destroy one chip full of photos and - there's no life more in the port.

    Please explain me, how to remove an usb stick or memory chip? With experiences only in pc:s, I do not find on my first apple e.g. MacBook Air a solution. Until now I have succeeded to destroy one chip full of photos and - there's no life more in the port...
    Someone told me just to remove the chip in clicking it to the trash can and voilá - it would be done. But as I did so, on the screen appeared a text which let me know, that that way had been the wrong one...
    I should have clicked Finder plus something.... which I do not now remember but which was then not found behind the Finder.
    So please would someone be so kind and tell me, where I can find explanations for the most simple functions. The manual I got does not include a clue.
    Thank you!

    First make sure that no application is using or has open any files on the disk. Then:
    Click and drag the disk icon on the desktop to the trash. Wait for the system to recognize the action, and the icon should disappear from the desktop. It is then safe to remove the device.
    Alternatively, you can secondary click on the disk icon, and then primary click "Eject (name of disk)". Wait for the icon to disappear off the desktop, and then it is safe to remove the drive.
    Here is a detailed help document on the subject.
    http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1056.html

  • Until now, I have used Bridge and PS, and when I enter any map with Bridge, it shows me thumb nails

    Until now, I have used Bridge and PS, and when I enter any map with Bridge, it shows me thumb nails of all the pictures in this map. CAn't I do that with PS Elements 11??

    contact adobe support by clicking 'still need help' as soon as available, https://helpx.adobe.com/contact.html

  • The Apple  store reinstalled completly the OS this morning on my Mac , I have now to restore the data from  the time machine . I have done it but its going on for already 2 hours and it continues ; Shall I wait ? and how long ,?

    Question : The Apple  store reinstalled completly the OS this morning on my Mac , I have now to restore the data from  the time machine . I have done it but its going on for already 2 hours and it continues ; Shall I wait ? and how long ,?

    Let it alone. No one can tell how long it will take as that is a function of your data.
    Barry

  • TS3988 please help i upgraded my iphone5 to new ios7 yesterday 2pm and untill now its already 17hours and why cant access or back to normal?is this normal or stil upgrading? it only appears the apple logo on screen and keep coming the logo screen on and o

    please help i upgraded my iphone5 to new ios7 yesterday 2pm and untill now its already 17hours and why cant access or back to normal?is this normal or stil upgrading? it only appears the apple logo on screen and keep coming the logo screen on and off.do i need to bring my phone to apple center or is this iops 7 takes longer time or an hours to successfully upgraded.please help me what can i do?

    Anyone have any suggestions? or is everyone else just as clueless as me !

  • HT4623 I "updated" my iPhone4S 16gig this morning and can't get past the "Rescue Email" screen.  I entered emails as well as opted out.  I have gone back, but Apple ID Security insists I add security questions and mail.  HELP!

    I "updated" my iPhone4S 16gig this morning and can't get past the "Rescue Email" screen.  I entered emails as well as opted out.  I have gone back, but Apple ID Security insists I add security questions and mail.  HELP!

    Claudius,either you didn't read my post, or you jumped to conclusions. I had a skype account that was created using a microsoft account (NOT THE ACCOUNT I AM USING NOW). PURE MICROSOFT ACCOUNT NO OTHER ACCOUNT LINKING.I had to change the primary mail of that account.I was told "no can do" by skype support.I found that if I went to account settings and clicked on the link on the line below the one that said "MICROSOFT etc" (labeled something along the lines of "TV or Device") I got the opportunity to set the password of the "live:username" account (WHICH YOU COINCIDENTALLY HAVE TO DO IF YOU WANT TO USE SMART TVs ETC).Once that was done, I COULD SUCCESSFULLY DO WHAT SKYPE SUPPORT SAID WAS IMPOSSIBLE- I could change the primary mail address. once that was done, and NOT BEFORE, I linked the account to a facebook account as well, just to be sure I have more than one way to access the skype account. What caused you to get the impression that I was writing something else? furthermore this sentence - "The solution you described in your initial message isn't actually once since all the time you were operating on different account that weren't actually linked" does not make sense, I think you mis-edited it.and I need to point out that you are incorrect. I WAS NOT OPERATING ON DIFFERENT ACCOUNTS I WAS OPERATING ON ONE SKYPE ACCOUNT, THAT WAS CREATED USING A MICROSOFT ACCOUNT just like you say you recommend. I still don't know how you can misread my initial entry like that.  If you have a better solution to my initial problem - changing the primary mail of a skype account created throuth either a microsoft account or a facebook account, Please write a sticky to explain how to do it, and please inform skype support that Yes it can be done, and this is the way it is done. So far my "lucky shot" seems to be the only way to do it.     

  • Can i use my time capsule to wirelessly backup my macbook and its external hard drive, which up until now was it's time machine and storage? How?

    Can i use my time capsule to wirelessly backup my macbook and its external hard drive, which up until now was it's time machine and storage? How?

    The external drive must be connected to the Mac using either USB or FireWire
    You must remove the external hard drive from the list of items that are "excluded" from backups in Time Machine Preferences.
    Here's how:
    Open System Preferences (gear icon on the dock)
    Open Time Machine
    Click Options
    Look for the name of the hard drive in the list of "excluded" items and click on it to highlight it
    Click the -- (minus) button at the bottom of the list to remove the hard drive from the list of "excluded" items....so it will now be backed up
    Strongly recommend that you do the first backup using Ethenret from your computer to the Time Capsule since the entire contents of the external drive will be copied on the first pass. Ethernet will be 3-5 faster than wireless.
    Once you have the first backup done, you can use wireless for subsequent backups since they will nornally be much smaller....unless you add large files to the external drive.

  • TS2518 I upgraded to Aperture 3.4 this morning, and now it will not open at all! It crashes every time, and tries rebuilding the library and repairing most times. The Library open fine in Iphoto

    Every time since I upgraded this  morning, attempting to open Aperture causes a crash. I upgraded to Aperture 3.4 this morning, and now it will not open at all! It crashes every time, and tries rebuilding the library and repairing most times. The Library open fine in Iphoto

    If you do not have the original install DVDs, use the Aperture Trial installer instead:
    Try if this download link for the trial version still works: if yes, you can unlock it with your serial number:
    http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
    Regards
    Léonie

  • I have bought a time capsule to use as time machine device. Until now I have used a external hard disk. How can I transfer the the old time machine datas to the time capsule?

    I have bought a time capsule to use as time machine device. Until now I have used a external hard disk. How can I transfer the the old time machine datas to the time capsule?

    This is really difficult to the point of not really worth it.
    Keep the old TM backups in archive.. and start afresh on the TC.
    Time Machine has a different way of backing up on Network drives cf Local drives.
    Pondini does have a method to do it... but I would not recommend it.
    http://pondini.org/TM/18.html

  • How do I know if I have an extended warranty? I purchased Now 9, 2011 almost 2 years. I dropped it this morning and broke the screen. I want to replace it, do I still get a new one?

    how do I know if I have an extended warranty? I purchased Now 9, 2011 almost 2 years. I dropped it this morning and broke the screen. I want to replace it, do I still get a new one?

    hudsonclub wrote:
    how do I know if I have an extended warranty?
    Enter your iPad's serial number in the following page: https://selfsolve.apple.com/agreementWarrantyDynamic.do
    Your warranty and service options will appear. If you purchased AppleCare+ (AppleCare Plus) you may be in luck.
    If you do not know its serial number you can find it stored in your last iTunes backup:
    Open iTunes on the computer you used to sync the iPad and select Preferences…from the iTunes menu. (In Windows, choose Edit > Preferences.)
    Select the Devices pane. Position the cursor over any of its backups. The iPad's serial number will appear in a popup window.
    For a screenshot read: iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
    Scroll down to:
    Additional Information >
    Getting the information from your computer >
    If you have access to your computer, but not your device

  • Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried

    Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried the whole site again, and then tried publishing as a new site altogether. Thought I would then try to export as HTML in the hope of uploading the files via an FTP client and Muse crashes and locks up again. I am extremely stressed about this as I am in the last few days of of website I have been working on now with no issues since December. We are due to go live and my client needs to see it. I am desperate for an answer. It is not looking good. I am on an Apple Mac and have not had any isses publishing it for the last 6 months. Not very happy to say the least. Need desperate help.

    Hi Zak, I got onto Adobe Customer Care Live Chat this morning and gave them the error message. After some trouble shooting with them it appears the older archived file of the site still publishes. I have now reverted back to the old file and copied and pasted out of the new file and from some ideas given to me by support I am now able to publish to Business Catalyst. It seems there was something corrupt within the new pages added yesterday. I have no idea if this would have still happened if I hadn't updated but I am glad it wasn't a Muse specific problem. I am loving using Muse and the support from Adobe has been excellent. Thanks everyone. By the way I do love the new version and apart from this hick up that lost me a few hours, aged me some more and gave me grey hair I really love Muse. Thanks again.

  • I have two phones that share an itunes acct and a notice came up this morning and I hit yes. Now I get a text everytime I send a text to the other phone. How do I turn that off?

    I have two phones that share an itunes acct and a notice came up this morning and I hit yes. Now I get a text everytime I send a text to the other phone. How do I turn that off?

    search google for "iphone remove picture from contact"

Maybe you are looking for

  • When accessing shared folder - 'You might not have permission to use this network resource" .. A device attached to the system is not functioning

    On a Windows 2008 R2 server that had been working fine, all of a sudden some shared folders became inaccessible.  Clicking on them returned the following: "<Folder> is not accessible.  You might not have permission to use this network resource.  A de

  • SAP FICO Tables for the ECC 6.0-Needed

    Hello Gurus, Please send me the ECC 6.0 master and Transaction data Tables. Below is link shared by Murukan Arunachalam which is quite useful, but it belongs to lower version  of ECC 6.0, deleted I am looking for updated version. Thanks a lot.

  • RTMP + HTTP Dynamic Streaming

    Dear, We are about to build a flash based online application. We need the best video support, therefore we would like to have a video player that has all the advantages like adaptive bitrate, caching, dynamic seek. We just got to know the new HTTP Dy

  • Generate password protected zip file

    Hi, I have a requirement of creating password protected zip file. Any guidance would much appreciate. Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production Thanks in advance Prashant

  • Canon MP 3120 Error when using MP Navigator

    Cannot start the MP Navigator EX. Check the following points. 1. The supported model of this software is as follows. Check your product model is listed.           Canon E500 series           Canon MG2100 series           Canon MG3100 series