Please help me activate my cs3

I had previuosly used bthe cs3 on my buisness laptop , but it was deactivated and now I am tryiong to install on my new ASUS computer

And what specific issues do you have? You need to provide a lot more information.
Mylenium

Similar Messages

  • Please help me!  Illustrator CS3 can't maintain correct size when saving to PDF!

    Hi - please help me!
    We run a Mac with CS3 Suite to design our signs for print & vinyl cut.
    Most of our files are 50 - 120 cms wide & high, some larger.
    If I create a document in Illustrator for exapmle of 100 cms x 100cms, put some artwork (vector) inside, and save it as a high res PDF, then close the file and open the PDF in illustrator, you can gaurentee that the dimensions will have changed by a fraction of a mm.  If working with bigger artwork it can be out but up to half a mil.  Typically a file could become say 58.687cm instead of 59cm.
    Anyone know why the heck this does that??
    It's the artwork & the artboard.
    Thanks,
    Henoch

    All of AI's math is based on points and inches and depending on DPI settings, there may be rounding errors with otehr unit systems. Perfectly normal. Has been forever that way. you may try to place an empty dummy frame around the entire artwork to enforce a specific artboard/ crop board size. Sometimes helps, but not always...
    Mylenium

  • I now own a second hand unit ipad3 but I cannot activate because the original ID and password is not recognized by itunes. Please help me activate my ipad3?

    I now own a second hand unit ipad3 but I cannot activate because the original ID and password is not recognized by itunes.

    renefromnl wrote:
    I now own a second hand unit ipad3 but I cannot activate
    The Apple ID and Password that was Originally used to Activate the iDevice is required
    If you do not have that information you will not be able to use the Device.
    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818

  • I purchased microsoft office 2011. I have downloaded and installed the software but at no time was I prompted to enter my product key. As a result I am unable to use the software. Please help me activate the software. Thanks

    I purchased downloaded and installed microsoft office 2011 onto my iMac. At no time was I prompted to enter the product key so I am unable to activate the software. Can anyone tell me what to do in order to activate the software?

    Welcome to Apple Support Communities
    Where did you download Office for Mac? If you downloaded it from Microsoft, read > http://support.microsoft.com/kb/2391941/en-us

  • Help me activate my iMessage and FaceTime.

    HI,
    I am not able to activate my iMessage and FaceTime through my numbers it says activation unsuccessful. Can you please help me activate my iMessage and FaceTime.
    Thank you.

    http://support.apple.com/kb/TS4268

  • Trying to activate a creative suite (mac)... please help

    Have had a rough day with Adobe... have been "helped" by the chat people at least 10 times today with no resolution.  Some component of my computer (Mac) got fried, and the Apple geniuses advised me to retrieve the data and applications by getting an external enclosure and hooking the hard drive up to another Mac.  I did that, but the adobe applications said that I needed to put in a new serial number.  After several attempts at using the chat feature, one of the Adobe employees said that I needed to uninstall and try again (and they would do something on their end to make it work). I have this latest transcript (see below), BUT IT STILL DOES NOT WORK after re-installing.  Please help...
    info: You are now chatting with Sparks.
    Sparks: Hello! Welcome to Adobe Customer Service.
    Sparks: Hi Jay.
    Jay Hilscher: Hi Sparks!
    info: Your chat transcript will be sent to {email] at the end of your chat.
    Sparks: I have received your query.
    Sparks: I will check and help you with this.
    Sparks: May I please have your email address registered with Adobe?
    Jay Hilscher: I'll let you know that I have been disconnected 5 times... this issue is not on my end.
    Sparks: And also the serial number of the product?
    Jay Hilscher: [email protected]
    Jay Hilscher: [removed by moderator - never share publicly]
    Sparks: Thank you for the serial number.
    Jay Hilscher: you're welcome!
    Sparks: Thank you for your patience.
    Sparks: May I please know if you have a installed the software again?
    Jay Hilscher: Yes I have
    Jay Hilscher: But I can't activate it with this serial number
    Sparks: If the deactivate button is grayed-out the product is already activated. 
    Jay Hilscher: Yes... I need to deactivate it.
    Sparks: In that case, please go ahead an uninstall the product.
    Jay Hilscher: I need it deactivated on the old hard drive so that I can activate it on the computer that I's like to use it on.
    Jay Hilscher: I've read on the forum that I don't want to uninstall without first deactivating...
    Sparks: No, problem.
    Jay Hilscher: What is a problem?
    Sparks: Please go ahead and uninstall the product, and install it on the new computer.
    Sparks: I will make certain changes for you to activate it on a new computer.
    Jay Hilscher: Ok... thanks...
    Sparks: You are welcome.
    Sparks: Is there anything else I can help you with?
    Jay Hilscher: Not right now, I guess... I hope this works!
    Sparks: You may contact us back if you face an issues.
    Sparks: Is there anything else I can help you with?
    Sparks: Are we still connected?

    Ned, thanks for the reply.  However, that doesn't seem to solve (or actually get me any closer to solving) the problem.  I uninstalled and reinstalled the creative suite, but I still get the window that says that I have 30 days to activate the software.  Then, the serial number that should activate it (per Sparks above) does not.  This is followed by another window that says, "We are unable to activate Adobe Design Suite Standard CS3.  Click the Phone Activation button to learn how to speak with one of our Customer Care representatives."  After clicking the phone activation button, however, and going through that whole process, no opportunity to speak with a Customer Care representative occurs.  Before being hung up on by the automated menu voice, I am directed to use the chat feature to "speak" with a representative.  This is how I've come to communicate with a number of representatives today (Sunita K / Case # 0213839182; Souvik S / Case #0213841272;  Naacom N / Case #0213841941;  Sparks / Case # Unknown;  and others) - none of whom has been able to follow through on assisting.

  • I am getting an error message when installing Photoshop cs3 extended on my Mac!!!! Please help

    Error message when installing Photoshop cs3 extended on my Mac!!!! PLEASE HELP!!!

    check compatibility first, http://roaringapps.com/apps:table

  • I am located in india, using reliance gsm network on my iphone 4, however i was unable to activate facetime on my iphone 4. please help

    i am located in india, using reliance gsm network on my iphone 4, however i was unable to activate facetime on my iphone 4. please help

    Is reliance a supported carrier for the iPhone?  If not, you will be unable to get facetime to activate.

  • HT4623 please help!! how can i configure my iphone 3gs because i've been updated a new version i did it but it's hard to activate it again.

    please help!! how can i configure my iphone 3gs because i've been updated a new version, i did it but it's hard to activate it again. this message i always recieved in my iphone
    "We're sorry, we are unable to continue with your activation at this time."

    You phone was hacked. You can not get help with it here. Hacking / Jailbreaking voids any warraty and forfeits your right to support. Discussing jailbroken / hacked devices is forbidden by the terms of service here.

  • HT4623 please help me when update my i phone 3G i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect

    please help me < when update my i phone 3G < i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect

    Sounds like your phone was hacked to use with your carrier.  Updating it has relocked the phone to it's original carrier.  You will not get the phone working again without a SIM from the original carrier.

  • Can't activate after installing iOS5 on iphone 4..PLEASE HELP!

    Went to update my iPhone 4 on Thursday, 14th. This is a phone that I have been using without any problems since the release of the iPhone 4. At this point I am using my PC (I have also tried on my Mac), so I download the new iTunes 10.2 or whatever the latest one is, then I download the iOS5 for my phone, then update.  Well, it gave me an error half way through and said that I needed to restore.  That fine cause I just backed eveything up, so I hit restore and everything seems fine until it trys to activate. Here's what come on the iPhone screen:
    Welcome Screen
    Select a language - english
    Country or region - US
    Location Services - Enable Location Services
    Wifi Networks
    Activation your iphone (it may take up to 3 minutes to activate your iPhone)
    Activation Error - Activation request could not be completed.  If problems persists, please contact customer care.
    In iTunes it has a similiar error that says: "We're sorry, we are unable to continue with your activation at this time.  Please try again later, or contact customer care."
    I called Apple that night and talked to someone for about 2 hours and tried everything he knew to try and fix the error with no resolution in the end.  He ended up transfering me to his supervisor and I talked to him for about 30 minutes until he said he would have to talk to someone else the following day and call me back.  He did call me back the next day, but only to tell me that they were already working on it and it should be resolved by Saturday night. He told me to keep restoring it every 2-3 hours and eventually it will finish activating.
    Well needless to say, it still still wasn't working by Sunday, so I called them back and talked to another supervisor and he said there was nothing he could do and that I just have to keep trying because they are already working on it.  That guy was kinda rude so I just decided I would call back Monday and get someone else.
    Well, on Monday I called AGAIN, and get a supervisor who said he was aware of the problem, but that it should have been fixed the middle of the previous week.  He said he would e-mail the person who was working with the problem and see what else I should do.  He also said he would be calling me back today (now Tuesday, 18th) after I get off work and tell me what that guy says.
    I have tried all these things on both my PC and Mac: restarting the computer, restarting itunes, restarting the iPhone, restoring the phone (like 100 times), reauthorizing the computer, restarting my internet (but it works fine for everything else), taking the SIM card in and out, connecting my phone to the internet and try activating without the computer, and calling AT&T (not a problem on their side).
    I don't have an apple store anywhere close or I would just go there.  I am getting so tired of dealing with this crap, and not having a phone (this is day 5 with a brick for a phone).  I am just wondering if ANYONE can help me at all!! I am desperate and will try anything, PLEASE HELP ME!!!

    has anyone solve this problem? i upgraded my iphone 4 to 5.1.1 and now i can see only ""We're sorry, we are unable to continue with your activation at this time.  Please try again later, or contact customer care."
    i tried mani sim card, laptops, wifi. but for 7 days the problem is still exist....
    Please help me!!!

  • I restored my 2nd hand ipad 2, previous owner released my ipad from their account and I still can not activate it using my apple id and password.  What do I have to do now?  Please help!

    I bought my ipad 2 from an acquintance.  I updated my software to iOS7 and after that was when all this started.  I got locked out because I was not using the right password.  After that, I restored my ipad.  After learning that the previous owner had to remove the ipad from their account, I contacted her and she did remove it.  Now, when I get to the Activate screen, it will not take my ID and password.  I've done all the steps necessary but can not get past this.  I've read so many threads and other articles on restoring and having the previous owner remove it, I've done all of that, but what do I do now?  Please help! Thank you.

    The previous owner/user should have done this.
    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT5661
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    http://support.apple.com/kb/ts4515
    Buying or Selling a Used iPhone or iPad Running iOS 7? Read This First!
    http://www.makeuseof.com/tag/buying-or-selling-a-used-iphone-running-ios-7-read- this-first/
     Cheers, Tom

  • I recently downloaded the new ios 5 software onto my 3gs, and now it won't activate and says 'no sim' on my itunes screen, i know this sim works because it did 30 mins ago and i tried it in other phones since. please help

    I just downloaded ios 5 update to put onto my 3gs, it is now saying i need to activate my phone and not allowing me. the phone screen says server is down, when my internet is fine. and my itunes says there is no sim in the phone, i know the sim works as i tried it in another phone to check, and i have also tried a different sim. please help, how do i activate it?

    Unfortunately, you might have to wait a little bit.  I know how you feel.  I can't live without my phone either.  The activation servers are probably overloaded with everyone trying to update to iOS 7 today.

  • My iMessage wont activate on my new iPhone 5c, I have tried everything. Please Help!

    I have tried everything in all of these discussions and i still cant get my imessage or facetime to activate on my iphone 5c. Please help! I've been trying since Thursday!

    I add to this discuss topic.  I have similar problem and tried everything in Apple Help support for this problem.
    Trying to activate iMessage, and appears "Waiting for activation..." (Esperando activación... in spanish).  In the iMac and iPad an advise window shows saying another device is using the Apple ID.  OK, accept in both devices but in the iPhone 5S still "Waiting activation...".
    I did a reset about all settings, activate iMessage for 1 hour and active again, hard reset, under wifi or 3G/LTE connection, loging out and in again with my Apple account and the problem still there.  "Waiting activation...".
    Solution anyone?
    Thanks!!

  • Photoshop CS3 crashes all the time - Please help!

    Hello
    I didn't find any answer in the forum.
    I work with Photoshop CS3 Version 10.0.1. on Mac Powerbook 10.4.11.
    Photoshop quits all the time, no work possible anymore. It quits when I want to open a file or when I want to safe an new file (message PS unexpectedly quite).
    The trouble (maybe - actually I am not sure) may started after I updated all Adobe program. There were some messages popping up that not everything was updated properly.
    Anyway I reinstalled Photoshop 3 times and CS3 completely 2 times and the last time I run the clean up program as well. No change.
    Please help! Thank you very much.
    Rosa

    Rosa,
    >So, you are also suggesting that I don't upgrade but install new.
    NEVER, ever use the "upgrade" option.
    Rather, do an "Archive and Install".
    >What do I have to take care of beside of making a backup from everything?
    Routine maintenance is imperative.
    I still advocate Repairing Permissions (with Apple's Disk Utility) before AND after any system update or upgrade, as well as before AND after installing any software that requires an installer that asks for your password.
    I have seen software installations go sour because the installer did not find everything as and where it should be.
    I have also seen software installations go bad because the installer did not clean up after itself properly and did not leave everything as and where it should be.
    This is just my own personal opinion and practice based on my own observations. Others may disagree and that's OK. I can only base my routines and my advice to others on my own experience and conclusion. I don't pretend to know why others believe otherwise.
    Repairing Permissions after the fact (i. e. not immediately before and after an install) seldom helps.; Try it anyway, though.
    ====
    Additionally, if your machine does not run 24/7 so that it runs the daily, weekly and monthly Cron Scripts in the middle of the night as intended by Apple, run Cocktail (shareware) as well.
    Cron Scripts are maintenance routines designed by Apple to run on a daily, weekly and monthly basis in the middle of the night.
    If you don't run them, you WILL run into trouble, sooner rather than later.
    Here's an excerpt from the Apple tech doc
    http://docs.info.apple.com/article.html?artnum=107388
    Mac OS X performs background maintenance tasks at certain times if the computer is not in sleep mode. If your computer is shut down or in sleep at the designated times, the maintenance does not occur. In that case, you may want or need to run these manually.
    Mac OS X periodically runs background tasks that, in part, remove system files that are no longer needed. This includes purging older information from log files or deleting certain temporary items. These tasks do not run if the computer is shut down or in sleep mode. If the tasks do not run, it is possible that certain log files (such as system.log) may become very large.
    Also, from:
    http://docs.info.apple.com/article.html?artnum=106978
    The disk activity generated by find is a normal part of file system maintenance, used for tasks such as removing invisible temporary files that are used by the system. It is scheduled to occur early in the morning at 03:15 everyday, 04:30 on Saturdays, and 05:30 on the first day of each month.
    NOTE:
    There have been comments to the effect that Apple "fixed" this in 10.4.2 and later versions of the OS, but I have not been able to verify this to my satisfaction. The reference in the 10.4.2 release notes are far from explicit on this subject.
    = = =
    If you have DiskWarrior, run it regularly too.

Maybe you are looking for

  • Mouse Wheel  under Windows XP Does not work- 9.0.3

    I use Windows XP and JDeveloper9.02 handled mouse wheel scrolling reasonably well(help files could not be scrolled). I can not use the mouse wheel in the Jdeveloper9.03 editor or the help files. Am I missing something? I thought JDeveloper9.03 added

  • Generating and transferring purchase requisition IDoc

    In ECC 6.0 there exists ALE_PR_CREATE which gave us all the required fields for generating the IDoc that we needed to transfer to our JCo program. Once the IDoc was generated using this program, it's status was set to '30' automatically. The next ste

  • Component MethodBinding NullPointerException

    Hey everybody.. this is an issue that has been giving me problems for a while now, and I haven't been able to figure it out. I've created a menu bar component which I use in this fashion in my pages: <or:menuBar pageClass="#{menuBarBean.PAGECLASS_HOM

  • Sync from ATV to Itunes

    Ok my ATV shoe in the device list and it is streaming. How do I get movies I have downloaded on ATV to Itunes? Is it suppose to be automatic? Because stuff that is on my ATV is not showing up in Itunes. I can sync from Itunes to ATV but I a can seem

  • When I try to scan I get an error that HP_IZE.exe is missing. Help!!

    I am unable to scan to my printer, it says that the file HP_IZE.exe is missing. HP Photosmart C4480, I have tried reinstalling the software and it indicates that it is already installed. I have removed it (I thought) but it still insists it is alread