Please help me, cannot start I-tunes since Update 7,5

Pleas Help me,
cannot start I-tunes since Update 7.5. Informtion is, currant files are missing, i-tunes doesn´t start.
Try to reinstal everything, and install i-Tunes with an old version from cd.
Then information will be, cannot start becaus some parts from an newer Version.,
so iám started updat to the new Version 7.5 and also i-tunes cannot started, because some current files are missing.
Can anybody help me, i don´t now what to do now. I hade my new I-pod, because i have only problems, please help me to love it again.
Ulrich

ok I am no expert on PC's or itunes but I have had the same problems as a lot of you on here. Have a look at what the solutions are. You need to remove the itunes 7.5 program and the quicktime program as it is causing the problem. Uninstall may or may not work, manually deleting the programs will work but your regisry will still indicate it is installed. My advice is to install
Windows Installer CleanUp Utility
I am not sure how to make an active link to it so have a look through this forum, install it, run it, remove all traces of itunes and QT then install from the downloads section version 7.4.3 which was ok. Then dont update, not yet, let them get sorted first. I hope this helps, it did me after about 4 hours and the info was right there all the time.

Similar Messages

Please help, I cannot start-up my PowerBook G4 (grey screen, no options)

Sir/Madam,
My PowerBook (PB) started misbehaving two weeks ago. It seemed difficult for i to access its drive (repetitive whirring sounds). I made a clone while I could and tried to fix any problems using Disk Utility.
At first, minor problems were detected so I booted using the clone (on firewire) and tried to repair. Disk Utility reported the drive was fine. I tried Drive Genius, Disk Warrior and Techtool. I rebuilt the directories, and yet when using the drive, the access problems and delays continued. During this whole process, I kept finding that in System Preferences - Startup Disk list, my firewire clone was not detected. I had to boot with the OPT key pressed to use it (this was unusual).
Anyway after hours of trying to find the fault, I decided to boot from the firewire clone again and completely erase the built in PB drive. After this, I thought, I will do a clean reinstall.
When the time came to do a reinstall, I found that my PB got stuck on the grey screen. Even if I pressed OPT-C on startup (to reinstall the system from optical) nothing would happen. In fact the only thing that does anything different is when I just press OPT on startup. I then get asked my firmware password and there follows what should be a menu of startup options but is actually blank. My firewire clone is absent from the menu, as is any optical disc that I may have placed (eg Leopard installation or the original system discs that came with my PB). The screen with the curly arrow on the left and the straight arrow on the right remains while a little clock mouse pointer shows time passing. After about 45 seconds, the clock hands stop rotationg and the pointer will not longer move. This remains as long as I have waited (hours)
I am now at an impasse where I do not know what to do. I am frustrated. I cannot run any hardware tests, I cannot install any system, I cannot get my PB to see my clone and startup. I would appreciate any help.
Thank you
Message was edited by: Touch

Maybe this will be if interest. Hi everyone. First post...
Anyway, I was updating my 1.5 G4 Powerbook to 10.5.7 and scored the interminable grey screen. No joy from Option, C, Safe Boot, Verbose Mode etc, etc. Ran fsck in Single User Mode and got the all clear from the hard drive. So...
Off to the Genius Bar in Sydney's new Apple store. Again, all clear on the hard drive, so must be an operating system error.
Back home, transferred everything I could think of via Target Disk mode and Firewire to the other Mac and re-installed Panther - yep, it's an oldie but a goodie. Then updated. Then upgraded to Tiger. Then updated. Then tried to load Leopard again. No joy. Grey screen, blue screen, spinning beachball, and clicks and whirrs from the DVD drive.
After about a day of wracking my brains - I may be slow - I checked the About This Mac feature and it hit me. The RAM was 256MB, not the standard 512. Which is a prerequisite for Leopard. And the Diagnostics line said Memory Failure...
Then I found the faulty RAM slot thread/lawsuit/recall notices... None of which applied to my serial number.
To cut a long story shorter, either the RAM module or the slot is stuffed. I need to do a bit more diagnosis, but I can see an expensive swap to a MacBook Pro coming up...
If you're having trouble booting your G4 Powerbook, check it for memory failure. Apparently it's not uncommon. And apologies if this has all be covered before. Hope it helps.

Help! Cannot answer calls ever since update.

After I did an update, I can no longer answer calls. It's like the answer button is dead when I hit it but ignore button works fine. Seen somewhere that it could have something to do with the keyboard being locked but it's always been locked and I never had a problem before this. I have a BB Curve 8530.

Hi,
My suggestion would be to reload your software again on your device. From what you describe, it sounds like the software may have been corrupted. Make sure you load your device software from a computer and not wirelessly from your device. You can get all the software you need from Verizon right here. Hope this helps.
Doc

Why is my ipad doesnt have a software update?please help,i cannot find it.. :(

why is my ipad doesnt have a software update?please help,i cannot find it..

The ipad 1 (no camera) can't be updated beyond IOS 5.1.1.

HT201302 please help.. i lost all the data in my ipad after upgrade to ios 702 i want my 3500 pictures back.. please help.. because my i tune also dont have the data

please help.. i lost all the data in my ipad after upgrade to ios 702 i want my 3500 pictures back.. please help.. because my i tune also dont have the data. please anybody help me...

Only possible if you have made an iTune or iCloud backup before the update.

Please help i cannot open the pdf files of cic.gc.ca

please help i cannot open the pdf files of cic.gc.ca

Hi ooovvvaaaiiisss12345.
Are you trying to view the pdf's from the browser are after downloading it and viewing via Reader.
Please let me know the OS and browser you are using.
Are you able to view the pdf's on other websites?
Let me know what errors you get while viewing the pdf's

Please help I cannot update my Keynote

Please help I cannot update my Keynote.I am trying to download the update but the message that I get says: The application could not be downloaded the file keyedobjects.nib couldnt be saved in the folder "com.apple.iwork.keynote.Gizmo.Turntable.nib" and it prompts me to retry but everytime I get the same report.

try goind to apple, support, type keynote update in the search box and download the version you need.
Also one or more of your third party apps could be the prolem. You can try uninstalling them one at a time till the download goes, then re-install them.
Make a back up FIRST!

Please help I cannot buy anything in AppStore I'm here in Dubai it says YOUR PURCHASE COULD NOT BE COMPLETED FOR ASSISTANCE, CONTACT ITUNES SUPPORT Help me please I need to buy something please asap

Please help I cannot buy anything in AppStore I'm here in Dubai it says YOUR PURCHASE COULD NOT BE COMPLETED FOR ASSISTANCE, CONTACT ITUNES SUPPORT Help me please I need to buy something please asap

Click here and request assistance.
(84901)

Please help! I have been trying to update iTunes 10.5.3 and it wont work?

Please help! I have been trying to update my iTunes for a few months with no luck! I click install and it will make it to 10% then tells me it has been interupted, so i resume and then it pops up with "iTunesSetup.exe couldnt be downloaded." I have done the repair thing and still nothing! This is driving me crazy!! I need iTunes updated to update my iPhone.

If your profile is correct you are using 10.6.8 Snow Leopard. The latest iTunes version for that OS is 11.3.1 If your profile is wrong and you have 10.9.5 Mavericks, then the iTunes version is 11.4. You cannot use Mavericks versions on Snow Leopard.

My canon p-150m scanner gives the error message "cannot load drivers" ever since updating to yosemite

why does my canon p-150m scanner gives the error message "cannot load drivers" ever since updating to Yosemite ? I have had 2 reload the driver 2x - but each new time I start I keep getting the same error message .

Try resetting the printing system.
OS X Mavericks: Reset the printing system

Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Subject:
Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Settings>General>International.
Set the calendar to "Gregorian". You have it set to Buddhist.

Keep beeping, cannot start, after installing security update. Please help.

I just apply the security update today in my MacBook (aluminum), but then the laptop cannot start.
When starting, it beeps 3X, pauses, then beeps 3X, pauses, and so on - never stops.
I press the power button to stop, but when pressing the power button back on, this keeps happening.
Does somebody also have this kind of issue? What should I do?
Sorry if I may have repeated other reports, I just cannot find here. I googled a bit and somebody tells that beeping 3X relates to graphics device problem. What should I do with this?
Thanks

Hi T,
Yes, that is the key we all are getting while the announced shows the key first presented in the update released as 2010-001, back in January. Nothing else reported besides the SHA1 diff.
I am sorry to tell you but this issue would hardly, if not ever, be related to the update. It seams to be the hardware fault in fact, test each memory in each slot, one at a time trying to boot the 4 times, 3 in the case, you are already up with this mem/slot combination.
Good luck.

Please Help. Cannot Install Itunes 8.0.1..."Ipod Service" Error.

Can someone please help. I cannot update to Itunes 8.0.1. Ever since I first tried it has given me the "iPod Service" Error. Now it won't let me update my iPhone either. I have tried rebooting my PC and still no luck. Any help would be hugely appreciated.

Below are the instructions to clean up iTunes installer from the apple website. It worked great for me at first. Now all the songs have ! next to them. Ugh. Any ideas?
Clean up iTunes installer files on the computer
You can download the Windows Installer Cleanup Utility from Microsoft, which will clean up any leftover installer files that may be causing issues with your current installation. To do this:
Click here first, and read the important information about the software.
Click the "Download the Windows Installer Cleanup Utility package now" link on that page to download a file titled msicuu2.exe.
Open the msicuu2.exe file and follow the prompts to install it.
On the Start menu, point to All Programs and then click Windows Install Cleanup; the Windows Installer Clean Up Utility window appears, listing software that is currently installed on your computer.
Select iTunes from the list and click Remove.
Click OK in the confirmation dialog that appears.
Repeat steps 5 and 6 if you have multiple iTunes entries listed.
Select QuickTime from the list and click Remove.
Click OK in the confirmation dialog that appears.
Repeat steps 8 and 9 if you have multiple QuickTime entries listed.
Click Exit.
Restart the computer.
Install the latest version of iTunes from http://www.apple.com/itunes/download.

Please help, I cannot open Firefox at all! crash ID: cf9fa02c-586d-4033-999b-a7a242110501 and Signature: mcffplg.dll@0x1cb20

It happened a few weeks a go, I have re-installed the Firefox but still didn't work. I can only open Internet Explorer. I cannot open Firefox and Google Chrome at all!. I am using windows 7.
Please help, I want my Firefox back...

The crash is reporting a problem with the McAfee Site Advisor (mcffplg.dll), try uninstalling the McAfee Site Advisor and see if you can then start Firefox.

Please help me to start up

Hi
I am newbee in Oracle after 11 years in IT.(in microsoft products with MCSE, etc ).
i want to just focuse on pl\sql programming but i don't know where to start.
1.does pl\sql is capable of writting apps in web or n-tier?
2. pl\sql is environment (like visual basic) or it's a tool that is attached to database?
3.for me to start up do you know any good book with exercises or just random pick?
4.if pl\sql is a database tool that means i have to install oracle db and create a table in order to exercises pl\sql is that righ? if so what you recommend?
is there like ready-to-use db just for learning and exercising purposes?
Please help me to get started i am totally confused.
tanx
Shawn

Hi Matt or whomever would answer!
Thanks for quick response. although i need to ask few more questions if you don't mind.
I know it's way too early that i would think about web and n-tier apps development using pl\sql. I just want to measure up capability of pl\sql in long run and job demanding.
1. As you mentioned I can use the Oracle html package functions or the PSP compiler to write web-pages in PL/SQL.( i guess it's advance issue down the road).
where can i download those you mentioned above as i am new to the site too. if you don't mind include URL.
2. Where can I or can i download third-party products like TOAD and PL/SQL Developer? if you don't mind include URL. (which one you recommend that's used by other companies).
3. As you mentioned I at least need access to a database either on my pc or via a network connection.
you mean I have too download Oracle database? where and what version you recommend? Please include URL.
after downloading db do i have to create tables?
since i am new to oracle is there any on line reading material in Oracle site on how to creat tables (for learning and doing pl\sql exercises)
please include URL.
is there any ready-to-use database in the internet that i can connect through net instead of creating one on my pc in order to do pl\sql exercises or i have to start from scratch?
4. where and what version of the Oracle client do i need to install on my pc? if you don't mind include URL.
5. where can i download SQL*PLUS which is a command-prompt type interface which allows pl/sql compilation?
if you don't mind include URL.
6. Between TOAD, PL\SQL Developer and SQL*PLUS which one is good to go with in long run in sense of being demanding and doing the actual work and capability?
7. Do i have to install oracle client, oracle database and compilation tool (either TOAD, PL\SQL Developer or SQL*PLUS) all in one pc or laptab?
8. what setup do you recommend (for installing database, oracle client and compilation tool) in sense of familliarity and challenges for learning and doing actual work in live working environment.
9. Is it useful using Oracle Developer 10g suite for learning and doing PL\SQL exercises and overall pl\sql programming language in real work environment?
Thank you so much for leading me and helping me out to start my new career.
Shawn

Please help me, cannot start I-tunes since Update 7,5

Similar Messages

Maybe you are looking for