PLEASE HELP Me Choose the Perfect dv7t Quad Specs

am customizing an HP Pavilion dv7t quad edition notebook PC.
I have a few choices to make. Money is not really a problem, but I don't really want to spend an extra $150 if the difference for the price is utterly minimal. I would really appreciate you reviewing my current selections and determining whether or not I should upgrade or downgrade them, where applicable. Also, I would really appreciate you answering any questions found throughout my post. Thank you so much.
I want my laptop to:
1) Run RuneScape with no lag (except for lag from the game itself)
2) Load webpages and programs extremely fast, and maintain the performance as the computer gets older.
3) I do not want my laptop to overheat. My current dv7t from 2009 becomes so hot every time I use it that I cannot let it touch my skin or it will hurt badly.
4) Have a beautiful graphics display
5) Be physically appealing. My scale is: The Samsung Series 9 is considered beautiful, the Alienware is considered hideous
With these requirements in mind, please tell me whether or not you think my proposed laptop is a good choice. Also feel free to tell me about any other laptops that you think might work well for me. (PS: would the Samsung Series 9 be able to handle Runescape? Thanks!)
1) Operating system
Genuine Windows 7 Home Premium 64-bit
2) Processor
2nd generation Intel(R) Quad Core(TM) i7-2720QM (2.2 GHz, 6MB L3 Cache) w/Turbo Boost up to 3.3 GHz
One step down: 2nd generation Intel(R) Core(TM) i7-2670QM (2.2 GHz, 6MB L3 Cache) with Turbo Boost up to 3.1 GHz
One step up: 2nd generation Intel(R) Quad Core(TM) i7-2820QM (2.3 GHz, 8MB L3 Cache) w/Turbo Boost up to 3.4 GHz (+$200.00)
"Both of those processors are rated at 45 watts, so if you go with the lower powered one, you might see just a few minutes of battery at best over the higher rated processor. Since the speed is ever so close, and the features are the same between the two, I would go with the 2720 due to the fact that it's about $200USD less. You will not see a difference in speed for 100mhz. Only long calculations, such as compressing a movie, MIGHT gain you just a minute or so with the extra 2mb of cache on the 2820, but not really worth it I think."
3) Graphics card
2GB Radeon(TM) HD 6770M GDDR5 Graphics [HDMI, VGA]
One step down: 1GB Radeon(TM) HD 6770M GDDR5 Graphics [HDMI, VGA] (-$50.00)
Two steps down: 1GB GDDR5 Radeon(TM) HD 6490M Graphics [HDMI, VGA] (-*75.00)
What is the importance of the memory of a graphics card?
4) Memory
8GB DDR3 System Memory (2 Dimm)
5) Hard drive
1TB 5400RPM Hard Drive with HP ProtectSmart Hard Drive Protection
One step down: 750GB 7200RPM Hard Drive with HP ProtectSmart Hard Drive Protection (-$80.00)
6) Primary battery
9 Cell Lithium Ion Battery
One step up: One 6 Cell and One 9 Cell Lithium Ion Battery (+$30.00)
Two steps up: Two 9 Cell Lithium-Ion Batteries (+$60.00)
When does it become oversized? does a larger battery make the laptop hotter?
7) Display
17.3" Full HD BrightView Infinity LED(1920x1080)
One step down: 17.3" HD+ HP BrightView LED (1600 x 900) (-$150.00)
Is there a noticeable difference?
8) Primary optical drive
Blu-ray player & SuperMulti DVD burner
9) Personalization
HP TrueVision HD Webcam with Integrated Digital Microphone and HP SimplePass Fingerprint Reader
10) Networking
Intel 802.11b/g/n WLAN and Bluetooth(R)
What does bluetooth do?
This question was solved.
View Solution.

Hi,
For computers/laptops, nothing is perfect. You always can find a better one tomorrow. Depending on what do you need/want you can buy a suitable laptop for TODAY.
2. Processor: 2670QM should be fine
3. Graphics: stick with 6770M
5. HDD: I prefer 7200rpm HDD, in theory should be faster
6. 6 or 6 cells is ok, again depending how long you use the machine w/o power point nearby
7. It depends but I prefer full HD (1920 x 1080)
8. I would buy BD/DVD combo as mentioed in the specs
9. No choice anyway
10. BT (Bluetooth) is a technology which allows you to transmit and receive wirelessly over a short distance (I really don't know how far it can go but my phone only works within around 10 meters). You can use it for a BT mouse, keyboard, phone ... Please read more information from this:
http://en.wikipedia.org/wiki/Bluetooth
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Please help with choosing the right text component

Hello,
In my applet, I need a single-line text component with the following capabilities:
1: Support for bold font (entire text,not just part of it)
2: Support for underlined text (entire text,not just part of it)
3: Support for blinking text
4: Ability to put caret anywhere within the text field with mouse
5: Support for field validation
6: Ability to handle various key events and modify the text and/or move around caret position accordingly.
Now, I know there are at least 4 different text components: JTextField, JTextArea, JEditorPane, JTextPane. Which one of these is most suitable for the above features? Is it possible to use JTextField to support all of the above?

Here is a link to the Java Swing tutorial which discusses the text components.
http://java.sun.com/docs/books/tutorial/uiswing/components/text.html
I think you need to use a JEditorPane or a JTextPane (although I'm not sure any of the components support blinking text). A demo program shows some of the capabilities of these components:
http://java.sun.com/docs/books/tutorial/uiswing/components/generaltext.html

HT4436 I am using IOS 4.1 in Ipod touch. I would like to take my data back using icloud. I am not able to enable icloud in to my ipod touch. please help me for the same.

I am using IOS 4.1 in Ipod touch. I would like to take my data back using icloud. I am not able to enable icloud in to my ipod touch. please help me for the same. Basically I am trying to take back to upgrade my ios to 5 or 6 version.

You can't back up to iCloud until you update to iOS 5 or higher. You will have to back up your iPod on your computer using iTunes. Update iTunes on your computer to the latest version, then connect your iPod to your computer, open iTunes, if iTunes give you a pop-up asking if you want to update your iPod, decline. Then click on the name of your iPod in iTunes, go to File>Devices>Transfer Purchases to transfer any purchased media to your iTunes library. Next, go to the Summary tab of your iTunes sync settings and click on Back Up Now to back up your iPod on your computer.
When it's done backing up, click on Check for Update (or Update) on the Summary tab of your iTunes sync settings. Allow your iPod to update, and leave it connected to your computer. At the end, it will restart and give you the option to restore to the iTunes backup you made earlier. Choose this option to restore your backup and sync your apps and other iTuens media to your phone.
This process is outlined in this article: http://support.apple.com/kb/HT4972, under "If you are attempting to update using a Mac or PC with which you normally sync".

Help With Choosing The Technology

Hello,
I need help in choosing the appropriate technology for the application that I'm going to be creating.
The characteristics of the system that have been decided until now:
Standalone app built on either Flex/Flash/AIR
Restricted to using the system on a single computer, hence can be a tightly coupled system
The server component of the system needs to be closed source and robust, for which im thinking something like a Java backend,etc,etc.
In a completely new environment, all that i need to be able to do is install just the AIR application and not worry about installing extra stuff for the server support.
Thanks In Advance for anyone who can help me out with this.

If you are saying you want the server component to be on the same machine as the Flex app, then your choices are severely limited due to the sandbox, unless of course you are using AIR, then you can just use the SQLite database.
But if there will be a sevrer component on another machine on the web, you could use BlazeDS, and like I said, its free and very robust.
http://opensource.adobe.com/wiki/display/blazeds/download+blazeds+3
http://learn.adobe.com/wiki/display/Flex/Creating+a+BlazeDS+web+service+application+in+Fle x+Builder
http://learn.adobe.com/wiki/display/Flex/Creating+a+BlazeDS+messaging+application+in+Flex+ Builder
http://sebastien-arbogast.com/2008/04/10/flex-spring-and-blazeds-the-full-stack/
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services

HT1414 Turn Passcode Off is disabled in my iPod touch 5. Could you please help me for the same ?

Turn Passcode Off is disabled in my iPod touch 5. Could you please help me for the same ?

What do yoo mean?

Can you please help me out the Info Cubes info for Budget Execution?????

Hi,
Can you please help me out the Info Cubes info for Budget Execution and Cash Management.
Thanks in advance,
Andy

Take the memory card out of the camer and put it in a card reader. When it mounts on the desktop select it and try to change the name. However, that might make it incompatible with the camera. You'll just have to try and see.
OT

Please help me with the installation process.

i have got free norton antivirus activation keybwith the pirchase of hp 16 gb pendrive .
please help me with the installation process.

Hey @10p,
Welcome to the HP Support Forums!
I understand that you need assistance with the installation of Norton Antivirus that you received with the purchase of an HP 16gb Pendrive. Did you get the Pendrive with a computer or just purchase the Pendrive on its own?
Once I know if the Pendrive came with the purchase of a computer I will be able to point you in the right direction for support. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Please help me with the homework given to me by my teacher

hello,i am new in java programming please help me with the home work given to me by my teacher at school, help me to build an interface that can work with this code.i can build an interface but i dont just understand this code.
//references:
//http://forums.techguy.org/development/570048-need-write-java-program-convert.html
import java.util.Map;
import java.util.HashMap;
import java.util.Iterator;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.BufferedReader;
import java.io.FileReader;
public class Translate
public static void main(String [] args) throws IOException
    if (args.length != 2)
      System.err.println("usage: Translate wordmapfile textfile");
      System.exit(1);
    try
      HashMap words = ReadHashMapFromFile(args[0]);
      System.out.println(ProcessFile(words, args[1]));
catch (Exception e)
      e.printStackTrace();
// static helper methods
   * Reads a file into a HashMap. The file should contain lines of the format
   *    "key\tvalue\n"
   * @returns a hashmap of the given file
@SuppressWarnings("unchecked")
private static HashMap ReadHashMapFromFile(String filename) throws FileNotFoundException, IOException
    BufferedReader in = null;
    HashMap map = null;
    try
      in = new BufferedReader(new FileReader(filename));
      String line;
      map = new HashMap();
      while ((line = in.readLine()) != null)
        String[] fields = line.split("\\t", 2);
        if (fields.length != 2) continue; //just ignore "invalid" lines
        map.put(fields[0], fields[1]);
finally
      if(in!=null) in.close(); //may throw IOException
    return(map); //returning a reference to local variable is safe in java (unlike C/C++)
   * Process the given file
   * @returns String contains the whole file.
private static String ProcessFile(Map words, String filename) throws FileNotFoundException, IOException {
    BufferedReader in = null;
    StringBuffer out = null;
    try {
      in = new BufferedReader(new FileReader(filename));
      out = new StringBuffer();
      String line = null;
      while( (line=in.readLine()) != null ) {
        out.append(SearchAndReplaceWordsInText(words, line)+"\n");
    } finally {
      if(in!=null) in.close(); //may throw IOException
    return out.toString();
   * Replaces all occurrences in text of each key in words with it's value.
   * @returns String
private static String SearchAndReplaceWordsInText(Map words, String text) {
    Iterator it = words.keySet().iterator();
    while( it.hasNext() ) {
      String key = (String)it.next();
      text = text.replaceAll("\\b"+key+"\\b", (String)words.get(key));
    return text;
   * @returns: s with the first letter capitalized
String capitalize(String s)
    return s.substring(0,0).toUpperCase() + s.substring(1);
}... here's the head of my pirate_words_map.txt
hello     ahoy
hi     yo-ho-ho
pardon me     avast
excuse me     arrr
yes     aye
my     me
friend     me bucko
sir     matey
madam     proud beauty
miss     comely wench
stranger     scurvy dog
officer     foul blaggart
where     whar
is     be
are     be
am     be
the     th'
you     ye
your     yer
tell     be tellin'

Heres your answer. Run it in on your pc.
public class Annoy
public static void main(String[] args)
   System.out.println("I am a triple poster.");
   System.out.println("I can not understand why I can not understand the help I have receved to date on the java forums.");
}

Please help me with the digital signature validation problem?

Please help me with the digital signature validation problem?

Hi
Execute the program in the Debuggin mode.
In the Debugger Window
Select Breakpoint -> Break point at -> Breakpoint at source code Menu Item and enter the details of the program/include/line no..
Activate the System Debugger On from the Settings Menu.
Hope this would help you.
Murthy
Edited by: Kalyanam Seetha Rama Murthy on Jul 18, 2008 7:20 AM

Please help me with the accounting records of iTunes. At step in placing credit card details are asked to contact iTunes Support

Please help me with the accounting records of iTunes. At step in placing credit card details are asked to contact iTunes Support

Brenda, the easiest way to contact the support team is thru the iTunes Customer Service website:
http://www.apple.com/support/itunes/contact/

Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it

Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks

Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks
Assuming your rig can support virtual machines, you can use Hyper-V and run another OS there.
Better practice however is to use a dedicated machine and use remote desktop to the server.
Corsair Carbide 300R with window
Corsair TX850V2 70A@12V
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Enterprise x64
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

[Urgent] Please help me verify the debug output on E&M interface.

Hello,
    I've got a problem when trying to make a call from the E&M interface on the router to PABX(Panasonic). I've got any dail-tone back. Please help me verify the logging output. It seemed to already send the digits.
###########################debug vpm signal####################
.Sep 20 06:43:43.911: htsp_process_event: [0/0/0, EM_ONHOOK, E_DSP_SIG_1100]em_onhook_offhook htsp_setup_ind
.Sep 20 06:43:43.911: [0/0/0] get_local_station_id calling num= calling name= calling time=09/20 13:43 orig called=
.Sep 20 06:43:43.915: htsp_timer - 3000 msec
.Sep 20 06:43:43.923: htsp_process_event: [0/0/0, EM_WAIT_SETUP_ACK, E_HTSP_SETUP_ACK]em_wait_setup_ack_get_ack
.Sep 20 06:43:43.923: htsp_timer_stop interdigit timer cfgd to 3000
.Sep 20 06:43:44.183: htsp_digit_ready: digit = 38
.Sep 20 06:43:44.183: htsp_process_event: [0/0/0, EM_OFFHOOK, E_VTSP_DIGIT]em_offhook_digit_collect
.Sep 20 06:43:44.443: htsp_digit_ready: digit = 39
.Sep 20 06:43:44.443: htsp_process_event: [0/0/0, EM_OFFHOOK, E_VTSP_DIGIT]em_offhook_digit_collect
.Sep 20 06:43:44.724: htsp_digit_ready: digit = 30
.Sep 20 06:43:44.724: htsp_process_event: [0/0/0, EM_OFFHOOK, E_VTSP_DIGIT]em_offhook_digit_collect
.Sep 20 06:43:44.996: htsp_digit_ready: digit = 38
.Sep 20 06:43:44.996: htsp_process_event: [0/0/0, EM_OFFHOOK, E_VTSP_DIGIT]em_offhook_digit_collect
.Sep 20 06:43:45.004: htsp_process_event: [0/0/0, EM_OFFHOOK, E_HTSP_PROCEEDING]
.Sep 20 06:43:46.224: htsp_call_bridged invokedhtsp_progress_notify
.Sep 20 06:43:46.228: htsp_process_event: [0/0/0, EM_OFFHOOK, E_HTSP_VOICE_CUT_THROUGH]em_offhook_voice_cut
.Sep 20 06:43:51.184: htsp_process_event: [0/0/0, EM_OFFHOOK, E_DSP_SIG_0000]em_offhook_onhook, HF duration=480
.Sep 20 06:43:51.184: mlpp_detection_enabled MLPP is not supported on this interface
.Sep 20 06:43:51.184: em_start_timer: 480 ms
.Sep 20 06:43:51.184: htsp_timer - 480 msec
.Sep 20 06:43:51.664: htsp_process_event: [0/0/0, EM_OFFHOOK, E_HTSP_EVENT_TIMER]em_offhook_wait_release_req
.Sep 20 06:43:51.664: htsp_timer_stop
.Sep 20 06:43:51.664: htsp_timer_stop2
.Sep 20 06:43:51.676: htsp_process_event: [0/0/0, EM_RLS_WAIT_RLS_REQ, E_HTSP_RELEASE_REQ]em_wait_rls_release em_onhook (0)
.Sep 20 06:43:51.676: [0/0/0] set signal state = 0x0 timestamp = 0
.Sep 20 06:43:51.676: em_start_timer: 400 ms
.Sep 20 06:43:51.676: htsp_timer - 400 msec
.Sep 20 06:43:52.076: htsp_process_event: [0/0/0, EM_WAIT_CLR_DONE, E_HTSP_EVENT_TIMER]em_clr_done
.Sep 20 06:43:52.076: htsp_process_event: [0/0/0, EM_ONHOOK, E_DSP_SIG_0000]em_onhook_onhook
##########################debug vpip vtsp all####################
.Sep 20 07:02:51.640: //44/D16BA46380FC/VTSP:(0/0/1):-1:-1:-1/vtsp_timer_stop:
   Timer Stop Time=23417277
.Sep 20 07:02:51.640: //-1/D16BA46380FC/VTSP:(0/0/1):-1:-1:-1/vtsp_free_cdb:
   CDB=0x47575388
.Sep 20 07:02:55.416: //-1/xxxxxxxxxxxx/VTSP:(0/0/1):-1:-1:-1/vtsp_allocate_cdb:
   CDB=0x47574E08
.Sep 20 07:02:55.416: //-1/xxxxxxxxxxxx/VTSP:(0/0/1):-1:-1:-1/vtsp_insert_cdb:
.Sep 20 07:02:55.416: //-1/xxxxxxxxxxxx/VTSP:(0/0/1):-1:-1:-1/vtsp_process_event:
   [state:INVALID STATE MACHINE, event:E_CC_SETUP_REQ]
.Sep 20 07:02:55.416: htsp_timer_stop3
.Sep 20 07:02:55.416: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_og_call_req:
   Echo Cancel=TRUE, Gain Control=0
   Auto Gain Control=FALSE, Dual Tone Detect Mask=0x0, Seq Tone Detect=FALSE
.Sep 20 07:02:55.416: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_do_call_setup_req:
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_opened_cb:
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_SETUP_REQ_PEND, event:E_VTSP_DSM_OPEN_SUCCESS]
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_req_pend_succ:
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_request_call:
   Mode=0, Peer=2
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_create_call_active_on_setup_req:
   Target Carrier ID=
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_create_call_active_on_setup_req:
   Source Carrier ID=htsp_setup_req
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_request_call:
   Progress Indication=3, Info Trans Capability=16
   Calling Number=, TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed
   Called Number=7744, TON=Unknown, NPI=ISDN
.Sep 20 07:02:55.420: htsp_process_event: [0/0/1, EM_ONHOOK, E_HTSP_SETUP_REQ]em_onhook_setup
.Sep 20 07:02:55.424: em_offhook (0)
.Sep 20 07:02:55.424: [0/0/1] set signal state = 0x8 timestamp = 0
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_SETUP_REQUEST, event:E_TSP_PROCEEDING]
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_proceeding:
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_timer:
   Timer Start Time=23417655, Timer Value=10000(ms)
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_proceeding:
   Peer=2, Progress Indication=0, Return Code=2
.Sep 20 07:02:55.424: htsp_process_event: [0/0/1, EM_BRANCH, EM_EVENT_IMMEDIATE]em_branch_immediate
.Sep 20 07:02:55.424: htsp_timer - 300 msec
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_opened_cb:
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_NULL, event:E_VTSP_DSM_OPEN_SUCCESS]
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_req_wait_pend_success:
   Event=72
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_timer_stop:
   Timer Stop Time=23417655
.Sep 20 07:02:55.724: htsp_process_event: [0/0/1, EM_WAIT_DIALOUT_DELAY, E_HTSP_EVENT_TIMER]em_imm_send_digits em_send_digits htsp_dial
.Sep 20 07:02:55.724: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_SETUP_REQ_PROC, event:E_TSP_DIAL]
.Sep 20 07:02:55.724: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_dial:
   Digits=7744, Tone Mode=0
.Sep 20 07:02:55.724: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dial:
.Sep 20 07:02:55.724: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/ds_do_dial:
   Digits To Dial=7744
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_dial_done_cb:
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_DS_DIALING, event:E_VTSP_DSM_DIALING_COMPLETE]
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/ds_dialing:
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/ds_do_dial:
   Digits To Dial=
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_dial_comp:
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/ds_do_dial:exit@556
.Sep 20 07:02:56.568: htsp_process_event: [0/0/1, EM_WAIT_DIAL_DONE, E_DSP_DIALING_DONE]em_offhook_digit_done
.Sep 20 07:02:56.568: htsp_timer_stop2 htsp_progress
.Sep 20 07:02:56.568: htsp_timer2 - 850 msec
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_SETUP_REQ_PROC, event:E_TSP_PROGRESS]
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_progress:
   Progress Indication=8, Signal Indication=2, cdb->answer_supervision=0
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_ring_noan_timer_start:
   Timer Start Time=23417770, No Answer Timer Value=180000(ms)
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_bridge_check_cb:
.Sep 20 07:02:56.572: htsp_call_bridged invoked
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_bridge_check_cb:exit@1187
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_bridge_status_cb:
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_save_fax_config:
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_save_fax_config:
   Fax Relay=ENABLED
   Primary Fax Protocol=CISCO_FAX_RELAY, Fallback Fax Protocol=NONE_FAX_RELAY
   Fax Relay CM Suppression :=ENABLED, Fax Parameters Set By=Global Settings
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_set_fax_feat_param:
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_save_tty_config:
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_save_tty_config:
   Save TTY configuration
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_set_tty_feat_param:
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_set_tty_feat_param:
   Set TTY feat parameters
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_SETUP_REQ_PROC, event:E_CC_DO_CAPS_IND]
.Sep 20 07:02:56.576: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_peer_event_cb:
   Event=E_DSM_CC_CAPS_ACK
.Sep 20 07:02:56.576: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_SETUP_REQ_PROC, event:E_CC_CAPS_IND]
.Sep 20 07:02:56.576: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_peer_event_cb:
   Event=E_DSM_CC_CALL_MODIFY
.Sep 20 07:02:56.580: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_feature_notify_cb:
   Feature ID=0, Feature Status=1
.Sep 20 07:02:56.580: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_reactivate_ringback:
.Sep 20 07:02:56.580: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_reactivate_ringback:exit@996
.Sep 20 07:02:56.580: htsp_process_event: [0/0/1, EM_WAIT_FOR_ANSWER, E_HTSP_VOICE_CUT_THROUGH]
.Sep 20 07:02:56.580: htsp_timer_stop2
.Sep 20 07:03:13.913: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_bridge_status_cb:
.Sep 20 07:03:13.913: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_SETUP_REQ_PROC, event:E_CC_DISCONNECT]
.Sep 20 07:03:13.913: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_disconnect:
   Cause Value=16
.Sep 20 07:03:13.913: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_ring_noan_timer_stop:
   Timer Stop Time=23419504
.Sep 20 07:03:13.913: htsp_timer_stop3
.Sep 20 07:03:13.925: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_WAIT_STATS, event:E_VTSP_DSM_STATS_COMPLETE]
.Sep 20 07:03:13.925: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_dsm_dsp_stats_complete:
.Sep 20 07:03:13.925: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_timer:
   Timer Start Time=23419505, Timer Value=60000(ms)
.Sep 20 07:03:13.929: htsp_process_event: [0/0/1, EM_WAIT_FOR_ANSWER, E_HTSP_RELEASE_REQ]em_wait_answer_release
.Sep 20 07:03:13.929: em_stop_timers
.Sep 20 07:03:13.929: htsp_timer_stop
.Sep 20 07:03:13.929: htsp_timer_stop2 em_onhook (0)
.Sep 20 07:03:13.929: [0/0/1] set signal state = 0x0 timestamp = 0
.Sep 20 07:03:13.929: em_start_timer: 400 ms
.Sep 20 07:03:13.929: htsp_timer - 400 msec
.Sep 20 07:03:14.329: htsp_process_event: [0/0/1, EM_GUARD_ALL, E_HTSP_EVENT_TIMER]em_guard_all_timer
.Sep 20 07:03:14.329: em_stop_timers
.Sep 20 07:03:14.329: htsp_timer_stop
.Sep 20 07:03:14.329: em_start_timer: 3000 ms
.Sep 20 07:03:14.329: htsp_timer - 3000 msec
.Sep 20 07:03:14.329: htsp_process_event: [0/0/1, EM_PARK, E_DSP_SIG_0000]em_park_onhook
.Sep 20 07:03:14.329: htsp_timer_stop
.Sep 20 07:03:14.329: htsp_timer_stop2 htsp_report_onhook_sig
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_WAIT_RELEASE, event:E_TSP_CALL_FEATURE_IND]
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_call_feature_ind:
   Feature Type=6
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_WAIT_RELEASE, event:E_TSP_DISCONNECT_CONF]
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_wrelease_release:
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_play_busy_timer_stop:
   Timer Stop Time=23419546
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_timer_stop:
   Timer Stop Time=23419546
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_do_call_history:
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_do_call_history:
   Coder Rate=16
.Sep 20 07:03:14.333: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_dsm_closed_cb:
.Sep 20 07:03:14.333: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_process_event:
   [state:S_CLOSE_DSPRM, event:E_VTSP_DSM_CLOSE_COMPLETE]
.Sep 20 07:03:14.333: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/act_terminate:
.Sep 20 07:03:14.333: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_timer_stop:
   Timer Stop Time=23419546
.Sep 20 07:03:14.333: //-1/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_free_cdb:
   CDB=0x47574E08
Thanks in advance.
Toshi

EDIT:
            I've not got any dial-tone back from PABX.
Thanks in advance
Toshi

HT201320 I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration

I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration

Contact the email provider and obtain the correct setup information.

HT1338 Could you please help me with the problem. I have mac os 10.7.4 on my macbook pro retina and want to update it to 10.7.5. I had been waiting for 2 hours to do it, but then it appeared that it was impossible. What should I do?

Could you please help me with the problem. I have macbook with retina with mac os 10.7.4 ann want to update it to mac os 10.7.5. I had been waiting for 2 hours to do it and had tried 3 times but it appeared that it was impossible. What should I do?

You can download the standalone updates:
OS X Lion Update 10.7.5 (Client Combo)
OS X Lion 10.7.5 Supplemental Update

Please help me get the latest version of adobe flash onto my iPad. Thanks so much

Please help me install the latest version of adobe flash
Onto my iPad. Thanks so much

Unfortunately, you cannot install adobe flash player on your iPad. This is because the iPad was not made to support the flash player software. However, you can try using third party apps to try and play flash videos on your iPad. Check out http://www.ehow.com/info_8163812_ipad-compatible-flash.html for more details.

PLEASE HELP Me Choose the Perfect dv7t Quad Specs

Similar Messages

Maybe you are looking for