Please Help me!!! DVLA/Courts : 1 - ME : 0

Hi, I am a complete novice but think I know how powerful database can be.
My problem is I have recently lost a court case against the UK Driver Vehicle Licence Agency.
I lost because the DVLA Barrister blinded the Judge with science about how hard it would be for DVLA to put error checking in their Database.
I am in court again next week asking a Higher Judge to allow me to appeal the lower courts decision.
Does anyone know if there is a qualified DB consultant or academic (Judges love letters after names) who can pen a quick e-mail on the approx cost of implementing error checking on a large DB. I don't need a full report since I only need to convince the Judge in a 5 minute hearing that there is more to come and allow me to move on to full appeal.

The facts of the situation are that in 2004 I was convicted of no MOT, Insurance and licence in my absence and got points on my licence. I spoke to DVLA who told me only the original court could overturn conviction and remove points.
I went back to the court three weeks later and, overturned my conviction, the court told me they would inform DVLA that points were removed from my licence.
Years later after my car was seized, Her Majesties Court Service said they sent notice of points removed from licence, DVLA claimed to have not received it.
I took DVLA to court under the Data Protection Act 1998 arguing that since a convicted motorist only has 28 days to appeal a conviction then a second data check some time after that could double check whether an appeal was succesful and correct any bad data the DVLA would pass onto the Police National Computer.
Also they would only have to check those convictions where they are planning to revoke the licence of the motorist. My licence was revoked for four years without me knowing about it. In all that time the police had been given the power by the DVLA's bad data to seize any vehicle I was driving.
It was May 2009 that my car was seized and me and the kids were left at the side of the road with our buckets and spades.
The DVLA said they have 52,000 court cases a month notified to them and since there are 330 courts therefore 'over 1.7 million convictions would have to be checked' and this would not be 'reasonable' to expect of the them.
Totally ignoring the fact that they have multiplied the national court cases by the 330 courts again. I still think a DB is more than capable of checking vast numbers of digital records once a month.
I just need an 'expert' to state the above in an e-mail which I can show the judge to proof there is merit in my appeal and I can dig further to prepare for a later appeal trial.

Similar Messages

  • The latest issue of Pages for iPad: 1. Very slow. 2. Late in reacting to typing. 3. When I go to a specific file, informs me that some images were deleted and therefore file has been changed. Then when OPEN option used, opens file slowly. Please, help!

    What I have to do to correct the following problems with Pages app. For iPad:
    Hesitates to display results of typing, some times for 5-6 characters;
    Very slow in opening files;
    Before opening of a specific file displays message: DOCUMENT DETAILS. SOME CHANGES WERE MADE TO YOUR DOCUMENT. SOME IMAGES ARE MISSING BECAUSE THEY WERE DELETED FROM YOUR DOCUMENT. We'll, nothing is missing. But it takes forever to open this file. The previous issue of Pages worked very good. But they would not let me to go back to it. Please, help!

    Tmobile did the exact same thing to me. So that is customer service at work in general. Nice try though lol.
    To the OP
    I see you said You paid for shipping, did you Insure it? Claim insurance on it. If you did not, It may not be Verizon or your fault in the sense of the phone not making it to the warehouse. There are people out in the postal world that will steal phones that are not insured. It could have been a Verizon employee, i suppose.
    But, if this was to be a bought in court, if you shipped it with out insurance, sadly your at fault.
    Do you still have the Serial number of your old phone? If so, you should be able to track where your phone is (if it is reported as a defect/damaged) If so, you may be able to use that as proof. If it does not show up as a defect or what ever they determine use as a loss, then you know it did not make it to the warehouse to be checked in. I would suspect Apple or Verizon could tell you what the Serial number came up as.

  • HT201472 can you guys please help me find my ipod because i lost it a week ago and i cant find it i've been trying really hard to find it but i cant cause i didn't set up find my phone before i lost it so my question is can you help me someway here my

    can you guys please help me find my iPod because i lost it a week ago and i cant find it I've been trying really hard to find it but i cant cause i didn't set up find my phone before i lost it so my question is can you help me someway  or somehow because my iPod i love it i would always take pictures with my friends and i have all my memories in it so i don't know where it is for all i know it could be on the street getting ready to get ran over because the last time i ever saw it was on last Sunday when i went to my cousins house when we were leaving i grabbed something to eat then i sat at the table then i left but i swear i had it in my pocket when i left but i didn't so i asked my cousin if he could look for it and he said sure so he started looking for it but didn't find anything and so i lost it sense and i asked my dad if i could get a new one and he said in a couple of years but i want that iPod back it has all my memories in it it's really special to me and i'm really desperate so please help me someway somehow anyway just help me please i don't know what else to do but beg for someone to help me because I've tried looking for it in my car in my room in my coats and nothing i tried looking for it on the website find my iPhone/iPod/iPad and it didn't help so please help me i beg of you if you are reading this and don't care you really are heartless because a little 12 year old girl can't find the most precious thing she got from her father 1 year ago and if you are reading this and you have a heart please help me find it if you do want to help me find it****
    <Personal Information Edited by Host>

    You are not addressing Apple here. We are all just users like yourself
    lost/stolen                                     
    No app on the iOS device is required.                           
    - If you previously turned on FIndMyiPod/iPhone/iPad on the iOS device in Settings>iCloud and wifi is on and connected or cellular data is on and connected for, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
    - You can also wipe/erase the iOS device and have the device play a sound via iCloud.
    iCloud: Erase your device
    iCloud: Use Lost Mode
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the device and report to police and carrier if iPhone or cellular iPad
    - There is no way to prevent someone from restoring the erase (it erases it) using it unless you had iOS 7 or later on the device. With iOS 7 or later, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                               
    Reporting a lost or stolen Apple product                                              
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • Please help me with this strange problem again!

    Hi gurus,
    I can't, for the life of me, figure out why this does not work in a procedure but works in an anonimous block.
    The XML is like this (part of it),
    <CaseNotification messageProducedDateTime="2005-07-20T13:58:11-05:00" xmlns="http://www.courts.state.mn.us/CourtXML/2.0.0">
                   <NotificationAdminHeader caseNumberKey="87CR0569" xmlns="http://www.courts.state.mn.us/CourtXML/2.0.0">
                        <CaseCountyIdentifier>87</CaseCountyIdentifier>
                        <CaseLocationText>Yellow Medicine County</CaseLocationText>
                        <BaseCaseTypeText>Adult</BaseCaseTypeText>
                        <CaseCategoryText>Criminal</CaseCategoryText>
                        <PartyIdentifier partyKey="854">
                             <PartyCaseAssociationText>Jurisdiction</PartyCaseAssociationText>
                        </PartyIdentifier>
                        <PartyIdentifier partyKey="123637">
                             <PartyCaseAssociationText>Defendant</PartyCaseAssociationText>
                        </PartyIdentifier>
                   </NotificationAdminHeader>
                   <InterimConditionsNotification>
                        <TriggeredDateTime>2005-07-20T13:57:53-05:00</TriggeredDateTime>
                        <NotificationEvent>InterimConditionsDeleted</NotificationEvent>
                        <InterimConditionsOrder orderEventKey="1760110">
                             <OrderDate>2005-07-20</OrderDate>
                             <OrderedBy judgeKey="00001J">
                                  <JudgeName>
                                       <PersonGivenName>John</PersonGivenName>
                                       <PersonMiddleName>P.</PersonMiddleName>
                                       <PersonSurName>Smith</PersonSurName>
                                       <PersonFullName>Smith, John P.</PersonFullName>
                                  </JudgeName>
                                  <JudicialAgencyIdentifier>MN011015J</JudicialAgencyIdentifier>
                             </OrderedBy>
                             <CourtCaseNumber documentVersion="1" effectiveDateTime="2005-06-06T00:00:00-06:00">
                                  <MNCISCaseNumber>
                                       <CountyNumber>87</CountyNumber>
                                       <CaseType>CR</CaseType>
                                       <YearFiled>05</YearFiled>
                                       <SequenceNumber>69</SequenceNumber>
                                  </MNCISCaseNumber>
                                  <CaseNumberIdentifier caseNumberKey="87CR0569">87-CR-05-69</CaseNumberIdentifier>
                             </CourtCaseNumber>
                             <ConditionSubject>
                                  <Party partyKey="123637" currentNameIndicator="true">
                                       <StandardName>
                                            <PersonGivenName>Clanry</PersonGivenName>
                                            <PersonSurName>Ogavitz</PersonSurName>
                                            <PersonFullName>Ogavitz, Clanry</PersonFullName>
                                       </StandardName>
                                       <PartyCaseAssociationText>Defendant</PartyCaseAssociationText>
                                  </Party>
                             </ConditionSubject>
                             <InterimConditions>
                                  <InterimConditionText>Anger management</InterimConditionText>
                                  <InterimConditionAmount>0</InterimConditionAmount>
                             </InterimConditions>
                             <InterimConditions>
                                  <InterimConditionText>Attend AA (Alcoholics Anonymous)</InterimConditionText>
                                  <InterimConditionAmount>5000</InterimConditionAmount>
                             </InterimConditions>
                        </InterimConditionsOrder>
                   </InterimConditionsNotification>
              </CaseNotification>
    The code is basically the same except that in the procedure the passing clause gets a differnt param, which is the passed in param from the procedure.
    xmltable
                             xmlnamespaces
                             ---     'http://schemas.xmlsoap.org/soap/envelope/' as "saop",
                                  'http://www.courts.state.mn.us/CourtXML/2.0.0' as "ic"
                             'for $ics in //ic:CaseNotification/ic:InterimConditionsNotification/ic:InterimConditionsOrder[@orderEventKey = $val/oeKey]/ic:InterimConditions
                             return
                             <ic:ICS>                    
                                  <ic:ICSText>{$ics/ic:InterimConditionText}</ic:ICSText>
                                  <ic:ICSAmount>{$ics/ic:InterimConditionAmount}</ic:ICSAmount>
                             </ic:ICS>'
                             passing p_XMLDoc, xmlelement("oeKey", v_OEKey) as "val"
                             columns               
                             ICSText          varchar2(100)      path '/ic:ICS/ic:ICSText',
                             ICSAmount     number           path '/ic:ICS/ic:ICSAmount'
    The strange thing is the procedure gets the ic:ICSText with the namespace value, which is http://www.courts.state.mn.us/CourtXML/2.0.0, so the finaly result is
    the whole thing: <InterimConditionText xmlns="http://www.courts.state.mn.us/CourtXML/2.0.0">Anger management</InterimConditionText>.
    I get the correct values when testing with the anonimous code!
    What did I do wrong? Please help!
    Thank you.
    Ben

    Hi gurus,
    OK, I did another test. I ran the same PL/SQL anonymous block that gets the correct element value in 10.2.0.3.0 and it gets the same wrong value: the element name plus the namespace value and the data itself. It gets the correct element value in 10.2.0.1.0 (my local database).
    Could anyone help me with this?
    Thanks!
    Ben

  • My ipod touch has been stolen. Please Help. I cant find the serial number anywhere. what should I do? I really want my Ipod back.

    Please help guys. It would mean the world if I got my Ipod back. What should I do?

    lost/stolen                                      
    No app is required.                                               
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    iCloud: Find My iPhone
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    iCloud: Find My iPhone
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • HT4009 Everytime I puchase an extra move..it only gives me 3 turns, therefore making me more frustrated and causing me to require even more purchases. Last night it gave me only 2 turns for a purchase. Please help!!

    While playing Candy Crush and purchasing more moves, it never gives me the correct amount of moves therefore forcing me to buy many more purchases. Last night it only gave me 2 moves on 1 purchase! PLEASE HELP!!

    Tmobile did the exact same thing to me. So that is customer service at work in general. Nice try though lol.
    To the OP
    I see you said You paid for shipping, did you Insure it? Claim insurance on it. If you did not, It may not be Verizon or your fault in the sense of the phone not making it to the warehouse. There are people out in the postal world that will steal phones that are not insured. It could have been a Verizon employee, i suppose.
    But, if this was to be a bought in court, if you shipped it with out insurance, sadly your at fault.
    Do you still have the Serial number of your old phone? If so, you should be able to track where your phone is (if it is reported as a defect/damaged) If so, you may be able to use that as proof. If it does not show up as a defect or what ever they determine use as a loss, then you know it did not make it to the warehouse to be checked in. I would suspect Apple or Verizon could tell you what the Serial number came up as.

  • ITHMB converter to Win XP? URGENT PLEASE HELP!

    I have about 200 pictures on my Windows XP PC that are from my iPhone. I took a bunch of pictures that I need this Friday for a court case. I can't open them! I no longer have the iPhone, only the pics. I looked everywhere I can imagine for a file converter program to no avail. What is needed to open these .ITHMB pictures?!? If I use a MAC will I be able to see them? Can probably rent one at a Kinkos for awhile if that's the case. Please help...

    I bet I have to find someone with a MAC, as I doubt that anyone at Kinkos will let me download a program onto their machines...thank you though for your suggestion! It's a good last resort - post to craigslist maybe for a MAC user as I don't know anyone with one

  • Please...I cant find my ipod and i think my friend has it so please help me!!!????!?!?!

    Please help me i cant find my ipod touch and i think my friend has it please help me any tips?!?!?!

    Gently ask our friend
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • Someone stole my ipod. They erased it and i cant find it. Please help! How do i find it?

    Someone stole my ipod. They erased it and i cant find it. Please help! How do i find it?

    lost/stolen                                      
    No app on the iPod is required.                            
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • I lost my iPod and it's offline. Can someone PLEASE help me?

    I lost my iPod and it's offline. Can someone PLEASE help me?

    No.
    lost/stolen                                     
    No app on the iPod is required.                           
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    iCloud: Erase your device
    iCloud: Use Lost Mode
    - If not shown/or off-line, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                               
    Reporting a lost or stolen Apple product                                              
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • Problem with threads and simulation: please help

    please help me figure this out..
    i have something like this:
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class DrawShapes extends JApplet{
         private JButton choices[];
         private String names[]={"line", "square", "oval"};
         private JPanel buttonPanel;
         private DrawPanel drawingArea;
         private int width=300, height=200;
         public void init(){
              drawingArea=new DrawPanel(width, height);
              choices=new JButton[names.length];
              buttonPanel=new JPanel();
              buttonPanel.setLayout(new GridLayout(1, choices.length));
              ButtonHandler handler=new ButtonHandler();
              for(int i=0; i<choices.length; i++){
                   choices=new JButton(names[i]);
                   buttonPanel.add(choices[i]);
                   choices[i].addActionListener(handler);
              Container c=getContentPane();
              c.add(buttonPanel, BorderLayout.NORTH);
              c.add(drawingArea, BorderLayout.CENTER);
         }//end init
         public void setWidth(int w){
              width=(w>=0 ? w : 300);
         public void setHeight(int h){
              height=(h>=0 ? h : 200);
         /*public static void main(String args[]){
              int width, height;
              if(args.length!=2){
                   height=200; width=300;
              else{
                        width=Integer.parseInt(args[0]);
                        height=Integer.parseInt(args[1]);
              JFrame appWindow=new JFrame("An applet running as an application");
              appWindow.addWindowListener(
                   new WindowAdapter(){
                        public void windowClosing(WindowEvent e){
                             System.exit(0);
              DrawShapes appObj=new DrawShapes();
              appObj.setWidth(width);
              appObj.setHeight(height);
              appObj.init();          
              appObj.start();
              appWindow.getContentPane().add(appObj);
              appWindow.setSize(width, height);
              appWindow.show();
         }//end main*/
         private class ButtonHandler implements ActionListener{
              public void actionPerformed(ActionEvent e){
                   for(int i=0; i<choices.length; i++){
                        if(e.getSource()==choices[i]){
                             drawingArea.setCurrentChoice(i);
                             break;
    }//end class DrawShapes
    class DrawPanel extends JPanel{
         private int currentChoice=-1;
         private int width=100, height=100;
         public DrawPanel(int w, int h){
              width=(w>=0 ? w : 100);
              height=(h>=0 ? h : 100);
         public void paintComponent(Graphics g){
              super.paintComponent(g);
              switch(currentChoice){
                   case 0:     g.drawLine(randomX(), randomY(), randomX(), randomY());
                             break;
                   case 1: g.drawRect(randomX(), randomY(), randomX(), randomY());
                             break;
                   case 2: g.drawOval(randomX(), randomY(), randomX(), randomY());
                             break;
         public void setCurrentChoice(int c){
              currentChoice=c;
              repaint();          
         private int randomX(){
              return (int) (Math.random()*width);
         private int randomY(){
              return (int) (Math.random()*height);
    }//end class drawPanel
    That one's from a book. I used that code to start with my applet. Mine calls different merthod from the switch cases. Say I have:
    case 0: drawStart(g); break;
    public void drawStart(Graphics g){
      /* something here */
    drawMain(g);
    public void drawMain(graphics g){
    g.drawString("test", x, y);
    //here's where i'm trying to pause
    //i've tried placing Thread.sleep between these lines
    g.drawLine(x, y, a, b);
    //Thread.sleep here
    g.drawRect(x, y, 50, 70);
    }I also need to put delays between method calls but I need to synchronize them. Am I doing it all wrong? The application pauses or sleeps but afterwards, it still drew everything all at once. Thanks a lot!

    It is. Sorry about that. Just answer any if you want to. I'd appreciate your help. Sorry again if it caused you anything or whatever. .n_n.

  • Apple Mini DVI to Video Adapter is not working. Please Help...

    I bought an Apple Mini DVI to Video Adapter to connect my Macbook to a TV using normal video cable. When I connect the cable, my Laptop DIsplay gives a flickr once and then it shows nothing. I checked Display in the system preference where I don't get a secondary monitor option. My TV is panasonic and it's an old one. I work on Final Cut Pro and it's very very important to see my videos on a TV. What am I doing wrong with the connection? Anyone Please Please help...

    Your probably not doing anything wrong. There are thousands of users with Similar issues and it seems to be with many different adapters.
    We have Mini DP to VGA (3 different brands) and they all fail most of the time. This seems more prevalent with LCD Projectors. I've tested some (50+) with VGA Monitor (HP) and they all worked, LCD Projector (Epson, Hitachi, and Sanyo) and they all fail, DLP Projector (Sanyo) and one worked.
    My Apple Mini DP to DVi works most of the time. My Mini DP to HDMI (Generic non Apple) works every time.
    The general consensus is that Apple broke something in the OS around 10.6.4 or 10.6.5 and its not yet fixed. As we are a school we have logged a case with the EDU Support group so will see what happens.
    Dicko

  • PSE icons instead of the photo. I need to view photos at a glance. Please help me????

    Please help, this is driving me crazy.  I have downloaded my free PSE #9, it came with my Leica Camera.  I cannot view at a glance any of my photos.  There is only an icon that reads, PSE.  To view any of my photos, I must click select and then preview.  This gets old, and I am doing 4 times the work. I am having to use the dates to guess where my photos might be.  I hate this!  My old Photo Shop #5 didn't do this.  When you went to my pictures, you could see every photo.
    I have tried the right click and open as any program.  What ever program I choose, that is the icon that appears.  No photo. Still no good.
    Please help.
    Thanking anyone in advance,
    Leica

    Hi,
    Are you using Windows Explorer to view the files?
    If so, load Explorer, go to the Tools menu and select Folder Options.
    Click on the View tab and make sure the first option (Always show icons, never thumbnails) is not checked.
    Click on OK and see if that is any better.
    Brian

  • Error Log during logon of RAR 5.3 Portal - please help

    Hi Experts,
    We are unable to login into the CC portal [GRC RAR 5.3]. The login screen is appearing again and again without logging into the CC portal
    Below is the log file which we are getting and we understand that the product is not responding properly to the application
    Can somebody please help us in resolving this at the earliest
    Thanks in Advance
    Best Regagards,
    Srihari.K
    Date : 12/05/2008
    Time : 2:38:16:008
    Message : Exception of type com.sap.sql.log.OpenSQLException caught: Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?"..
    [EXCEPTION]
    com.sap.sql.log.OpenSQLException: Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
         at com.sap.sql.jdbc.common.CommonPreparedStatement.setNull(CommonPreparedStatement.java:303)
         at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:509)
         at com.sap.sql.sqlj.runtime.profile.ref.RTStatementJDBCPrepared.setString(RTStatementJDBCPrepared.java:359)
         at com.virsa.cc.xsys.mgmreport.dao.sqlj.MGMTotalDAO.getResult(MGMTotalDAO.sqlj:63)
         at com.virsa.cc.ui.RARiskVGraph.refreshData(RARiskVGraph.java:476)
         at com.virsa.cc.ui.RARiskVGraph.wdDoInit(RARiskVGraph.java:130)
         at com.virsa.cc.ui.wdp.InternalRARiskVGraph.wdDoInit(InternalRARiskVGraph.java:191)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
         at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
         at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
         at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Severity : Error
    Category : /System/Database/sql/jdbc/common
    Location : com.sap.sql.jdbc.common.CommonPreparedStatement
    Application : sap.com/tcwddispwda
    Thread : SAPEngine_Application_Thread[impl:3]_32
    Datasource : 1666450:/apps/usr/sap/HLG/JC00/j2ee/cluster/server0/log/defaultTrace.trc
    Message ID : 0003BAF96A51006E0000001F0000265200045D4A46588084
    Source Name : com.sap.sql.jdbc.common.CommonPreparedStatement
    Argument Objs : com.sap.sql.log.OpenSQLException,Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".,com.sap.sql.log.OpenSQLException: Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
         at com.sap.sql.jdbc.common.CommonPreparedStatement.setNull(CommonPreparedStatement.java:303)
         at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:509)
         at com.sap.sql.sqlj.runtime.profile.ref.RTStatementJDBCPrepared.setString(RTStatementJDBCPrepared.java:359)
         at com.virsa.cc.xsys.mgmreport.dao.sqlj.MGMTotalDAO.getResult(MGMTotalDAO.sqlj:63)
         at com.virsa.cc.ui.RARiskVGraph.refreshData(RARiskVGraph.java:476)
         at com.virsa.cc.ui.RARiskVGraph.wdDoInit(RARiskVGraph.java:130)
         at com.virsa.cc.ui.wdp.InternalRARiskVGraph.wdDoInit(InternalRARiskVGraph.java:191)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
         at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
         at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
         at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Arguments : com.sap.sql.log.OpenSQLException,Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".,com.sap.sql.log.OpenSQLException: Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
         at com.sap.sql.jdbc.common.CommonPreparedStatement.setNull(CommonPreparedStatement.java:303)
         at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:509)
         at com.sap.sql.sqlj.runtime.profile.ref.RTStatementJDBCPrepared.setString(RTStatementJDBCPrepared.java:359)
         at com.virsa.cc.xsys.mgmreport.dao.sqlj.MGMTotalDAO.getResult(MGMTotalDAO.sqlj:63)
         at com.virsa.cc.ui.RARiskVGraph.refreshData(RARiskVGraph.java:476)
         at com.virsa.cc.ui.RARiskVGraph.wdDoInit(RARiskVGraph.java:130)
         at com.virsa.cc.ui.wdp.InternalRARiskVGraph.wdDoInit(InternalRARiskVGraph.java:191)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
         at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
         at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
         at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Dsr Component : n/a
    Dsr Transaction : d2d9c100c2b811dd9eb60003baf96a51
    Dsr User :
    Indent : 0
    Level : 0
    Message Code : com.sap.sql_0019
    Message Type : 1
    Relatives : /System/Database/sql/jdbc/common
    Resource Bundlename :
    Session : 92
    Source : com.sap.sql.jdbc.common.CommonPreparedStatement
    ThreadObject : SAPEngine_Application_Thread[impl:3]_32
    Transaction :
    User : ac_admin

    Hi,
    The shear length  of your post is frightening - this would keep many potential replies away !!
    What i woudl recommend is --> Open an OSS messgae ! This would resolve your problem !!
    Thanks

  • Lock-Ups and Freezes PLEASE HELP

    Hello everyone..
    I come here to see if anyone can help me... Ive done it all and nothing is working.
    I just recently started having problems with my computer, im not sure why this happend but ill try to explain everything as best as I can.
    The problem started a few days ago while I was playing SWG's. I was playing and all of a sudden my machine froze, the screen locked-up and then after about 2 min the entire system restarted. I then logged back into my windows and after a while a system froze and restarted yet again. I though it was a SWGs issue but then the computer would freeze while browsing the net and doing other tasks.
    I have formated my machine, re-installed my drivers, and re-installed the hardward. Nothing has worked.
    My computer specs are
    300watt PSU Enermax True Power
    MSI K7n2 nforce2 8xagp mobo
    athon 1700xp
    512mb of Kingmax DDR 2700
    SB audigy x-gamer sound card
    MSI geforce4 ti 4200 8xAGP graphics card
    Hope thats enough..
    One last thing... When my computer restarts after the problem i get a message asking me to report the problem to microsoft... i located the error file and this is what was writen in it....
    // Watchdog Event Log File
    LogType: Watchdog
    Created: 2003-07-19 01:30:24
    TimeZone: 300 - Eastern Standard Time
    WindowsVersion: XP
    EventType: 0xEA - Thread Stuck in Device Driver
    // The driver for the display device got stuck in an infinite loop. This
    // usually indicates a problem with the device itself or with the device
    // driver programming the hardware incorrectly. Please check with your
    // display device vendor for any driver updates.
    ShutdownCount: 5
    Shutdown: 0
    EventCount: 5
    BreakCount: 5
    BugcheckTriggered: 1
    DebuggerNotPresent: 1
    DriverName: nv4_disp
    EventFlag: 1
    DeviceClass: Display
    DeviceDescription: MSI MS-StarForce GeForce4 Ti 4200 with 8X (NVIDIA GeForce4 Ti 4200 with AGP8X)
    HardwareID: PCI\VEN_10DE&DEV_0281&SUBSYS_89431462&REV_A1
    Manufacturer: NVIDIA
    DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0C1C 0006000D 000A0C1C 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
    DriverCompanyName: NVIDIA Corporation
    DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 31.00
    DriverFileVersion: 6.13.10.3100
    DriverInternalName: nv_disp.dll
    DriverLegalCopyright: (c) NVIDIA Corporation. All rights reserved.
    DriverOriginalFilename: nv_disp.dll
    DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 31.00
    DriverProductVersion: 6.13.10.3100
    Hope this helps, i dont understand what it means so maybe one of you might...
    Please help me on this... Ive tried everything i can...
    Thanks in advance

    If what you are saying, and I am reading correctly:
    The machine and game was working just peachy and all of a sudden the problem manifested itself?
    Did you do ANYTHING to change your system prior to this happening to possibly have an effect?
    the fast that you said you have re-loaded the OS and removed and re-installed the hardware with the same result tells me that there may be some sort of hardware failure and this could get difficult to troubleshoot.
    First things first, try a memory testing software like memtest86 to see if you get any errors.
    http://www.memtest86.com/

  • My app store wont let me download apps, says they are not available in the uk please help??

    my app store wont let me download apps, says there not available in the uk?? please help??

    Try This...
    Close All Open Apps...  Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

Maybe you are looking for

  • Looking for a small project via internet (part time )

    Hello! I'm a beginer in labview with only one year experience in device programming (e.g.-power supply) and i search for some little project for develop my skills in labview. I am available maximum 15 hours/week. If someone is interested plese e-mail

  • Report for WT & GL

    Hello Experts, One query......... Do we have any report from which we can fetch the details of Wage types assign against the GL ????? Like which  GL account is assign to which Wage type? Regards,

  • 12 employee id cards ( 2 * 6) on a4 in smartforms( Anybody dare to do this)

    Hi friends There is requirement to print 12 employee id cards ( 2 * 6) in A4 size in smartforms. Id card consist of these fields company address emp id emp name emp photo designation address Option 1 : Photos are on desktop Option 2 : Photos are stor

  • Forbidden: Error 403

    I just changed modems recently. Ever since I installed the new modem I can only get Firefox to work as my browser. This is what I see in Safari: Forbidden You don't have permission to access http://www.google.com/ on this server. Apache Server at www

  • PROGRESS BAR IN FORMS6I

    HI.. FRIENDS HOW TO USE PROGRESS BAR IN FORMS6I PLEASE GIVE ME SAMPLE CODE REGARDS SANTOSH RANE