Please help me fast with my 5310XM
okey so here is a really tricky problem!
I dropped my 5310 (6 months old) on the ground and the power button flew off and i couldnt get it back on, later that day i lost the power button, i think it was the vacumer that ate it...
well to move on i could still start and turn om the phone couse there was an orange thing that was under the power button so it wasno problem until about 3-4 days ago when also that dissapered somewear.. so now i dont have anything to start or turn off the phone.. NOWS the TRICKY part.. i accidently removed the battery earlier this day and it died ofcourse, so please help me!! How can i start the phone wihtout having to delete everything, couse i got really important messeges on it, or can i atleast get the messages to a computer or something?
yea and btw, i got about 19000 messeges and like 1000 of them is important...
Synced with Ovi Suite of course. and backup of the phone's contents.
If the phone is synced with Ovi Suite, then you can see all of your messages on your PC, even if you delete everything from your phone, it would be there everytime you open ovi suite. Ovi suite also backs up the entire phone.
If you find my post helpful please click the green star on the left under the avatar. Thanks.
Similar Messages
-
My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to listen I had to put on loud speaker or to use hands free please help me out with this problem if some body have answer?
Hi Venkata from NZ,
If you are having an issue with the speaker on your iPhone, I would suggest that you troubleshoot using the steps in this article -
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
the apps we have downloaded are not working, please help, extremely frustrated with our ipod 4
See my previous reply for for the apps closing.
For the wifi problem:
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect OK before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
firefox is not able to load any websites... i tried everything given in the support forum under the topic firefox is not able to load any websites but other programs can.. but still i am facing the same problem. so please help me out with this issue!!
firefox is not able to load any websites... i tried everything given in the support forum under the topic firefox is not able to load any websites but other programs can.. but still i am facing the same problem. so please help me out with this issue!!
-
Please help me out with some fundamentals in BW
Hello,
Please guide me regarding the below mentioned questions.
1. what is the key date in query designer.
2. when do we perform attribute change run
like once the master data is loaded then we perform attribute change run and load the transactional data ?
3.what is the disadvantage of using aggregates.
4. what is full repair options?
please help me out with these questionsHI,
Repair full request :
If you indicate a request in full update mode as a repair request, then it is able to be updated in all data targets. This is also true if they already contain data from initial runs or deltas for this DataSource / source system combination, and they have overlapping selections.
Consequently, a repair request can be updated at any time without checking each ODS object. The system supports loading in an ODS object by using the repair request without having to check the data for overlapping or request sequencing. This is because you can also delete selectively without checking an ODS object.
Posting such requests can lead to duplicate data records in the data target.
Hierarchy/attribute change run after loading master data;
When hierarchies or attributes of characteristics change, the aggregate affected by the change can be adjusted manually or calculated automatically in process chains.
Aggregates:
Aggregates are materialized, pre-aggregated views on InfoCube fact table data. They are independent structures where summary data is stored within separate transparent InfoCubes. The purpose of aggregates is purely to accelerate the response time of queries by reducing the amount of data that must be read in the database for a given query navigation step. In the best case, the records presented in the report will exactly match the records that were read from the database.
Aggregates can only be defined on basic InfoCubes for dimension characteristics, navigational attributes (time-dependent and time-independent) and on hierarchy levels (for time-dependent and time-independent hierarchy structures). Aggregates may not be created on ODS objects, MultiProviders or Remote Cubes.
Queries may be automatically split up into several subqueries, e.g for individual restricted key figures (restricted key figures sales 2001 and sales 2002). Each subquery can use one aggregate; hence, one query can involve several aggregates.
If an aggregate has less than 15 components, BW 3.x puts each component automatically into a separate dimension that will be marked as line item (except package and unit dimension); these aggregates are called flat aggregates. Hence, dimension tables are omitted and SID tables referenced directly. Flat aggregates can be rolled up on the DB server (i.e., without loading data into the application server). This accelerates the roll up (hence the upload) process.
Disadvantage : The more aggregates exist, the more time-consuming is the roll-up process and thus the data loading process; the change run is also affected.
Hope this info Helps.
Thanks,Ramoji. -
Please help me out with the function code of print option in module pool
please help me out with the function code of print option in module pool, along with CASE condition.
regards,
asifHi
you can use the Function module
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
destination = 'LP01' "'Printer name
list_name = 'TEST'
list_text = 'SUBMIT ... TO SAP-SPOOL'
immediately = ' '
line_size = '2000'
no_dialog = 'X' "pass space to Pop screen for Print option
IMPORTING
out_parameters = wa_pri_params
valid = w_valid.
"next call below things
NEW-PAGE PRINT ON NO DIALOG PARAMETERS wa_pri_params.
"and try to Print the values inside the new-page
NEW-PAGE PRINT OFF.
Prabhudas -
How to access the activities created by an end user especially when the end user has left the organization?Please help me out with the possible solution
Hi Ramesh,
In the web UI we have business role IC_manger where you can search the activities based on employee responsible and you can use business transaction assignment functionality to assign those activities to any other end user or team.
Else you can also use Agent inbox functionality if you have configure the agent inbox for those activity.
Hope this helps solving your query -
My apple account is disabled, please help me deal with as soon as possible!
My apple account is disabled, please help me deal with as soon as possible!
Change the password, but did not receive the letter to change the password
-
Please Help Urgent:Fast Search returning wrong result sets
Hi All,
We are facing below issue with fast search.
Currently in My project when we are searching for a phrase it is returning wrong result sets.
For example if we search for “Endura”, It is returning documents related to
Endura as well as Centura.
But the expected results are only Endura documents.
When we look in to the documents we didn’t find the search term (“Endura” ) either inside document content or in its meta data.
In order to resolve the issue we tried the below steps
1-
We manually edited and saved the document, to ensure the appropriate Guid association to metadata.
2-
Index reset
3-
Full crawl
But no luck so far.
Please help.Thanks in advance.
Regards
SubratSubrat,
This may be related to spellchecking or may be synonym. Spellcheck is based on indexed terms.
The best test would be to run the queries from qrserver (13280) and then look at the spellcheck query transformations. If spellchecking is not doing it, then you must have a synonym setup .Check your keyword/synonyms from the SharePoint side. -
My Pc shutDown When Running Game Then Bettery Be Hot. Please Help Me Fast
My Pc shutDown When Running Game Then Bettery Be Hot.
Like iM Play FaceBook Game'S FarmVille Etc Or AnyGame Like San Andreas MultiPlayer / Online Games...... After 10-20 Mnt My Pc ShutDown i ReFormated iT But The Same Problem . Here My Computer Details Please Help Me .. .. . . . . . .. .. . . . . .. . .. . . . . i Need Help .. . .. . .. .. . . . .. . .. .. . . ..
http://img204.imageshack.us/img204/4028/detailsb.png
Please Help Me i Need Fast Help .... . . . . . . .... .. . .. . .. . . .. . . . .. .. .. . . .
subject edited by moderator.
ps: no need to add "not solved" tag into the subject.Hi and welcome to the forum!
Which lenovo notebook is it? Does it have a sticker on the bottom bearing a number like 2668-KHU? Let us know that number, there is no need to post S/N though.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel -
Please help: deploy Bean with "No resource available" error for M:N relationship
Hi all,
I wonder any one comes across with deploying beans with M:N relationship with
"No resource available".
I defined the relationship in ejb-jar.xml and dbms in the
weblogic-cmp-rdbms-jar.xml, but when I deployed the beans I got
the following error
------ Error message-----
weblogic.common.ResourceException: No resources available at weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:568) at weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:400) at weblogic.common.internal.ResourceAllocator.reserveNoWait(ResourceAllo
cator.java:368) at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.j
ava:166) at weblogic.jdbc.common.internal.ConnectionPool.reserveNoWait(Connection
Pool.java:127) at weblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiData
Source.java:194) at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
ce.java:219) at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getConnection(RDBMSP
ersistenceManager.java:317) at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.createDefaultDBMSTab
le(RDBMSPersistenceManager.java:1149) at weblogic.ejb20.utils.TableVerifier.verifyTableExistsAndCreateMaybe(Ta
bleVerifier.java:428) at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.verifyTablesExist(RD
Unable to deploy EJB: CustomerBean from \ejb:
Errors encountered ''The Container-Managed Persistence Entity EJB failed while
creating its SQL Type Map. The error was: Invalid object name 'localcustomer_localsubscription'.
Severity 16, State 1, Procedure 'IVM_SERVER null', Line 1', 'Error encountered
while attempting to create Default DBMS Table: 'localcustomer_localsubscription'.
Error Text: 'weblogic.common.ResourceException: No resource s available'.''
---------------End error ----------------------
---------------my ejb-jar.xml
<ejb-jar>
- <enterprise-beans>
- <entity>
<ejb-name>AddressBean</ejb-name>
<local-home>customer.LocalAddressHome</local-home>
<local>customer.LocalAddress</local>
<ejb-class>customer.AddressBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
- <cmp-field>
<field-name>addressID</field-name>
</cmp-field>
- <cmp-field>
<field-name>street</field-name>
</cmp-field>
- <cmp-field>
<field-name>city</field-name>
</cmp-field>
- <cmp-field>
<field-name>zip</field-name>
</cmp-field>
- <cmp-field>
<field-name>state</field-name>
</cmp-field>
<primkey-field>addressID</primkey-field>
</entity>
- <entity>
<ejb-name>CustomerBean</ejb-name>
<local-home>customer.LocalCustomerHome</local-home>
<local>customer.LocalCustomer</local>
<ejb-class>customer.CustomerBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>CustomerBean</abstract-schema-name>
- <cmp-field>
<field-name>customerID</field-name>
</cmp-field>
- <cmp-field>
<field-name>firstName</field-name>
</cmp-field>
- <cmp-field>
<field-name>lastName</field-name>
</cmp-field>
<primkey-field>customerID</primkey-field>
- <query>
- <query-method>
<method-name>findByLastName</method-name>
- <method-params>
<method-param>java.lang.String</method-param>
</method-params>
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM CustomerBean AS o
]]>
</ejb-ql>
</query>
- <query>
- <query-method>
<method-name>findByFirstName</method-name>
- <method-params>
<method-param>java.lang.String</method-param>
</method-params>
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM CustomerBean AS o
]]>
</ejb-ql>
</query>
</entity>
- <entity>
<ejb-name>SubscriptionBean</ejb-name>
<local-home>customer.LocalSubscriptionHome</local-home>
<local>customer.LocalSubscription</local>
<ejb-class>customer.SubscriptionBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>SubscriptionBean</abstract-schema-name>
- <cmp-field>
<field-name>type</field-name>
</cmp-field>
- <cmp-field>
<field-name>title</field-name>
</cmp-field>
<primkey-field>title</primkey-field>
- <query>
- <query-method>
<method-name>findAllSubscriptions</method-name>
<method-params />
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM SubscriptionBean AS o
]]>
</ejb-ql>
</query>
</entity>
</enterprise-beans>
- <relationships>
- <ejb-relation>
<ejb-relation-name>LocalCustomer-LocalAddress</ejb-relation-name>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalCustomer-Has-LocalAddresss</ejb-relationship-role-name>
<multiplicity>one</multiplicity>
- <relationship-role-source>
<ejb-name>CustomerBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>addresses</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalAddress-Has-LocalCustomer</ejb-relationship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>AddressBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>customer</cmr-field-name>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
- <ejb-relation>
<ejb-relation-name>LocalCustomer-LocalSubscription</ejb-relation-name>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalCustomers-Have-LocalSubscriptions</ejb-relationship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>CustomerBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>subscriptions</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalSubscriptions-Have-LocalCustomers</ejb-relationship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>SubscriptionBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>customers</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
</relationships>
- <assembly-descriptor>
- <container-transaction>
- <method>
<ejb-name>AddressBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
- <container-transaction>
- <method>
<ejb-name>CustomerBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
- <container-transaction>
- <method>
<ejb-name>SubscriptionBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
------------------End of ejb-jar.xml---------------
Please help
Thanks in advance
MikeHi Gaurav,
Other applications used the same the datasource, which I used for this application,
are running fine.
I think there is some bug in the wlserver 6.1 to create the join table. I think
it is the time I should ask the bea wlserver 6.1.
Mike
"Gaurav Khanna" <[email protected]> wrote:
This implies that there are no database connections available. You need
to
check if you can log into your database instance. By default there are
30
connections specified for an instance in Oracle. FYI.
"Mike" <[email protected]> wrote in message
news:[email protected]...
Hi all,
I wonder any one comes across with deploying beans with M:Nrelationship with
"No resource available".
I defined the relationship in ejb-jar.xml and dbms in the
weblogic-cmp-rdbms-jar.xml, but when I deployed the beans I got
the following error
------ Error message-----
weblogic.common.ResourceException: No resources available atweblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:568) atweblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:400) atweblogic.common.internal.ResourceAllocator.reserveNoWait(ResourceAllo
cator.java:368) atweblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.j
ava:166) atweblogic.jdbc.common.internal.ConnectionPool.reserveNoWait(Connection
Pool.java:127) atweblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiData
Source.java:194) atweblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
ce.java:219) atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getConnection(RDBMSP
ersistenceManager.java:317) atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.createDefaultDBMSTab
le(RDBMSPersistenceManager.java:1149) atweblogic.ejb20.utils.TableVerifier.verifyTableExistsAndCreateMaybe(Ta
bleVerifier.java:428) atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.verifyTablesExist(RD
Unable to deploy EJB: CustomerBean from \ejb:
Errors encountered ''The Container-Managed Persistence Entity EJB failedwhile
creating its SQL Type Map. The error was: Invalid object name'localcustomer_localsubscription'.
Severity 16, State 1, Procedure 'IVM_SERVER null', Line 1', 'Errorencountered
while attempting to create Default DBMS Table:'localcustomer_localsubscription'.
Error Text: 'weblogic.common.ResourceException: No resource savailable'.''
---------------End error ----------------------
---------------my ejb-jar.xml
<ejb-jar>
- <enterprise-beans>
- <entity>
<ejb-name>AddressBean</ejb-name>
<local-home>customer.LocalAddressHome</local-home>
<local>customer.LocalAddress</local>
<ejb-class>customer.AddressBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
- <cmp-field>
<field-name>addressID</field-name>
</cmp-field>
- <cmp-field>
<field-name>street</field-name>
</cmp-field>
- <cmp-field>
<field-name>city</field-name>
</cmp-field>
- <cmp-field>
<field-name>zip</field-name>
</cmp-field>
- <cmp-field>
<field-name>state</field-name>
</cmp-field>
<primkey-field>addressID</primkey-field>
</entity>
- <entity>
<ejb-name>CustomerBean</ejb-name>
<local-home>customer.LocalCustomerHome</local-home>
<local>customer.LocalCustomer</local>
<ejb-class>customer.CustomerBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>CustomerBean</abstract-schema-name>
- <cmp-field>
<field-name>customerID</field-name>
</cmp-field>
- <cmp-field>
<field-name>firstName</field-name>
</cmp-field>
- <cmp-field>
<field-name>lastName</field-name>
</cmp-field>
<primkey-field>customerID</primkey-field>
- <query>
- <query-method>
<method-name>findByLastName</method-name>
- <method-params>
<method-param>java.lang.String</method-param>
</method-params>
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM CustomerBean AS o
]]>
</ejb-ql>
</query>
- <query>
- <query-method>
<method-name>findByFirstName</method-name>
- <method-params>
<method-param>java.lang.String</method-param>
</method-params>
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM CustomerBean AS o
]]>
</ejb-ql>
</query>
</entity>
- <entity>
<ejb-name>SubscriptionBean</ejb-name>
<local-home>customer.LocalSubscriptionHome</local-home>
<local>customer.LocalSubscription</local>
<ejb-class>customer.SubscriptionBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>SubscriptionBean</abstract-schema-name>
- <cmp-field>
<field-name>type</field-name>
</cmp-field>
- <cmp-field>
<field-name>title</field-name>
</cmp-field>
<primkey-field>title</primkey-field>
- <query>
- <query-method>
<method-name>findAllSubscriptions</method-name>
<method-params />
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM SubscriptionBean AS o
]]>
</ejb-ql>
</query>
</entity>
</enterprise-beans>
- <relationships>
- <ejb-relation>
<ejb-relation-name>LocalCustomer-LocalAddress</ejb-relation-name>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalCustomer-Has-LocalAddresss</ejb-relationshi
p-role-name>
<multiplicity>one</multiplicity>
- <relationship-role-source>
<ejb-name>CustomerBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>addresses</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalAddress-Has-LocalCustomer</ejb-relationship
-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>AddressBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>customer</cmr-field-name>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
- <ejb-relation>
<ejb-relation-name>LocalCustomer-LocalSubscription</ejb-relation-name>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalCustomers-Have-LocalSubscriptions</ejb-rela
tionship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>CustomerBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>subscriptions</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalSubscriptions-Have-LocalCustomers</ejb-rela
tionship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>SubscriptionBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>customers</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
</relationships>
- <assembly-descriptor>
- <container-transaction>
- <method>
<ejb-name>AddressBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
- <container-transaction>
- <method>
<ejb-name>CustomerBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
- <container-transaction>
- <method>
<ejb-name>SubscriptionBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
------------------End of ejb-jar.xml---------------
Please help
Thanks in advance
Mike -
Please Help! Problems with Windows Vista 32-bit on Boot Camp (Wireless/Etc)
We recently purchased a new aluminum Mac Book (13 inch) with Leopard (10.5.4). I attempted to install Boot Camp and Windows Vista 32-bit. I can successfully alternate between both operating systems with no problems. However, I am having 2 problems:
1) I cannot connect to wireless internet. No connections will even show up when I attempt to connect, its almost as if an adapter hasn't been installed.
2) I cannot set up the trackpad to do right click.
I've read articles everywhere and nothing has helped. Can anybody please help me??? Any support/advice is greatly appreciated. Thanks in advance!
- PiercedpierceNKC:
Welcome to the Apple discussions.
It appears that you may not have installed the boot camp drivers. Boot into Windows and insert your Leopard installation disk in the CD/DVD drive. This should automatically begin installation of the necessary drivers. Reboot the computer when instructed and all the hardware should work as designed.
The right click is accomplished by placing two fingers on the trackpad and then depressing the trackpad button. This should also work after the drivers are installed as instructed above.
Axel F. -
Can anyone please help me? I haven't the slightest clue on how I would undo emptying my trash with a Mac laptop. I have been told that even though you've emptied your trash, it's never really emptied it can always be found hidden somewhere! I'm hoping that is true. I lost over 6000 photos and videos dating back 8 years :( and to think I was finally organizing them all to back up on an external hard drive lol. Any suggestions much appreciated :)
Well you must stop using the Mac if you want to have any hope of recovering any of them.
Then you are going to need sofware such as list on http://data-recovery-software-review.toptenreviews.com/mac-recovery-software/dat a-rescue-review.html
Yopu will also need another disk for any recovered files
Allan -
Please help me out with embedding!
HI CAN ANYBODY HELP ME OUT. OUR TEAM IS WORKING ON A SITE N I
HAVE JUST CREATE A ANIMATION IN FLASH CS3 BUT WHEN I MAKE .SWF FIE
IT WILL NOT SHOW UP ON WINDOWS I THINK WE NEED TO EMBEDD FONTS.
PLEASE HELP ME OUT ASAP.tanya Verma wrote:
> HI CAN ANYBODY HELP ME OUT. OUR TEAM IS WORKING ON A
SITE N I HAVE JUST CREATE
> A ANIMATION IN FLASH CS3 BUT WHEN I MAKE .SWF FIE IT
WILL NOT SHOW UP ON
> WINDOWS I THINK WE NEED TO EMBEDD FONTS. PLEASE HELP ME
OUT ASAP.
>
Give us link to the problematic file so we can check it out.
Meantime - if you animate regular text and use STATIC font,
you don't need to embed
anything. Make sure text is not set to DYNAMIC.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami> -
Please help me out with "Data only excel option "
Post Author: pavan pusuluri
CA Forum: Crystal Reports
When i am trying to spool the data with data only excel option using crystal reports XI, the records are appearing in two rows instead of single row. i have studied that when we use data only excel option entire record will be displayed in a single row,but it is not appearing in that way.Please help me out in fixing this bug. I am very much new to crytal reports.Post Author: pavan pusuluri
CA Forum: Crystal Reports
I thank you for the prompt reply.
All the field are of same size and height. The format is fine. The report is designed in such a way that data is displayed in three detail sections. What i would like to have is " i want the data in these three sections to be displayed in a single row when i select the data only excel export option".Please help me out in fixing this issue.
Thanks in anticipation
Maybe you are looking for
-
I'm not responding issue on chat with Windows XP user
Hi Everyone, First off, My ability to log on is still spotty with a mac.com or AIM address. I've done everything from my last posting regularly but still get spotty log ons, appoximately 1 in 8 log ons is successful, the rest is hoist unexpectedly lo
-
Why Won't it Export to Word ?
I just bought one year of this Export PDF thing for $20 just for the sake of one file I want to convert. The prog goes about uploading it - takes forever (It's 66megabytes) - and then closes with a curt, fleeting message that there was an unexpected
-
Can anybody help with this? thanks Export: Release 11.2.0.1.0 - Production on Tue Mar 19 13:31:18 2013 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.
-
Mac In Design CS3: Crashing when exporting to PDF
I have been trying to get ID to export to pdf for 2 days now.. and it keeps crashing. Has someone else had this problem too? If so can you please tell me how to fix the issue... I need to get this project in and I am at a loss here. Even if someone c
-
PSE8 Organizer not automatically reading media card
Hi, I have a client that is using PSE8 Organizer and all of a sudden it has stopped reading the media card automatically. My client believes this happened after an update by Adobe Updater. They say that it used to be a simple process of placing the c