Please help me figure out why my i move program will not capture?? sound with my videos

Hello anyone, I am not real good at this but when I go to imovie and capture a vidio using the camera and mic of the computor, I get now sound. I checked all mics ect. but when I use the Voice over coice , It does capture the sound, so how do I get it to capture the sound for the original video? Thank you for any help.

did you ever use any plugins to clean up your library?
http://support.apple.com/kb/TS3430

Similar Messages

Can someone please help me figure out why I keep getting the "can not reach server" when I try to download the ebook? This is happening with Adobe Digital Editions.

When I try to download the ebook I bough, the Adobe Digital Reader shows the following message: "can not reach server". Can someone please help me with this?
TO be precise, it says "licensee server communication problem"
Thank you

The thread running through your explanation has to do with connectivity to your server. (iCloud out of the blue asking for password, unable to message your boyfriend, unable to access e-mail). You said that you boyfriend restart his device and then the two of you were able to then imessage. My best advice for you would be to go to settings to reset to reset network settings. Once this has been done you then will need to enter the name and password of your wifi. ONce this is done you then can attempt to check to see that all passwords are enter correctly.
Good luck.

Can someone please help to figure out why Flash player won't download to my system???

When I go into facebook I have to download flash player every time. This has been going on for about 6 months. I have tried to get help but can not seem to get it figured out. Last week when I downloaded it started to say it was finished but wasn't in the system and now I can't play games on facebook at all. Please someone help.

moggies10 wrote:
C:\Windows\system32\Macromed\Flash
That means you do not have Flash Player on your system at all.
Download the offline installer from http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header and save it to disk, then close all browser windows and run the downloaded installer.

Hi , can someone please help me figure out why my site looks sooooo different in Chrome and I.E??

Hello and thank you for the time.
Here is my site in question. I've been redesigning things lately ... and checked it out in Chrome and I.E. (haven't checked out the other browsers yet) and the color schemes look extremely different on my end. I am at a loss for why this is.
http://prodigypianostudios.com
I am not even an amateur by any means ... I really suck at designing and this is hard for me. So please be gentle in technical language
Thanks for the help Oh great wizards of CSS and HTML !!
And just to add - The color schemes in I.E. were actually colors I used in dreamweaver but I changed them to the colors that are showing in Chrome. Chrome is the one I want and I.E. is being difficult. I can't find in my code where I could possibly have multiple colors selected as background colors.

When you have layout problems, the first place to go is to the W3 validator. I say this because it make no sense to chase a layout issue when you know your page contains HTML that doesn't validate. Unfortunately, your page does not validate -
http://validator.w3.org/check?uri=http%3A%2F%2Fprodigypianostudios.com%2F&charset=%28detec t+automatically%29&doctype=Inline&group=0
Most of those errors are simple fixes - you have been pretty sloppy about making sure that tags are properly closed, and your table structure is a tad hinky. See if you can fix these first.

Please help me figure out why Firefox is hanging - with problem signature

Hi, I am having a repetitive issue with Firefox where it just freezes up ("not responding). Most of the time it never responds and I have to just shut it all down and restart. When I do this, even though I click the option to check for a solution and close the program, it thinks for a second and gives me the following "problem signature" but it doesn't inform me of any solution. Here is what it usually says:
Problem signature:
Problem Event Name: APPCRASH
Application Name: plugin-container.exe
Application Version: 31.0.0.5310
Application Timestamp: 53c75e91
Fault Module Name: mozalloc.dll
Fault Module Version: 31.0.0.5310
Fault Module Timestamp: 53c72e91
Exception Code: 80000003
Exception Offset: 0000141b
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
**Except this last time, it instead said:
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangB1
Application Name: firefox.exe
Application Version: 31.0.0.5310
Application Timestamp: 53c75e72
Hang Signature: 6fe5
Hang Type: 0
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Hang Signature 1: 6fe5a46c27c960d6794641adcb9f9725
Additional Hang Signature 2: 3ecb
Additional Hang Signature 3: 3ecb099458780b94b15832cd5ce3bb6a
Additional Hang Signature 4: 6fe5
Additional Hang Signature 5: 6fe5a46c27c960d6794641adcb9f9725
Additional Hang Signature 6: 3ecb
Additional Hang Signature 7: 3ecb099458780b94b15832cd5ce3bb6a
Then a box pops up and says "Plugin container for firefox has stopped working" and the problem signature is:
Problem Event Name: APPCRASH
Application Name: plugin-container.exe
Application Version: 31.0.0.5310
Application Timestamp: 53c75e91
Fault Module Name: mozalloc.dll
Fault Module Version: 31.0.0.5310
Fault Module Timestamp: 53c72e91
Exception Code: 80000003
Exception Offset: 0000141b
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e78
At this point firefox totally shuts down and does not restart unless I open it again. When this happens I get the "this is embarrassing" screen where I can uncheck or leave checked what I want to be restored. I will point out that I usually have a few windows and multiple tabs in each window open at any given time. I don't know if this factors into it because I never only have one window or tab open to compare it to. I also generally leave them open even when I close my laptop so basically they stay open until the next time is crashes. Maybe this is the issue? Not sure. I also sometimes get an error type message about a script not working right. The most recent one is:
"Script: chrome://global/content/bindings/tabbox.xml:734"
I only use Firefox generally, browser-wise. I am using IE to post this because Firefox just keeps freezing and when I try to restart it and re-open the previous windows I had open, it freezes again. I do not have Chrome or any other browser installed. I love Firefox!
Thank you for any help you can provide. I skipped over some of the recommendations that are generally suggested before posting a question but they all would have involved scrapping the many tabs I have open and then I would lose all of them because they aren't bookmarked. I hope that doesn't sound really stupid. I'm (obviously) not super technically inclined when it comes to the internet. Thanks again for reading this and I would very much appreciate any input.
Oh and I am using Windows 7 and I think the Firefox version is 31.0
Thanks!!!!

Try to create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Please help me figure out why this thread's performance degrades over time

Hello.
The code below is from a Runnable that I've tested inside a Thread operating on a TreePath array of size 1500; the array 'clonedArrayB' is this TreePath array. The code is designed to create a more stepped version of setSelectionPaths(TreePath[]) from class JTree.
The performance decrease of the thread is very rapid; this is discernible simply from viewing the println speed. When it gets to about 1400 TreePaths added to the JTree selection, it's running at roughly 1/10 the speed it started running at.
I know there's no problem with maintaining a set of selected paths of that size inside a JTree. I also know that the thread stops when it should. So it must be some operation I'm performing inside the brief piece of code shown below that is causing the performance degradation.
Does anyone have any idea what could be causing the slowdown?
Many thanks for your help. Apologies if you would have liked an SSCCE, but I very much doubt it's necessary for this. Either you can see the problem or you can't. And sadly I can't x:'o(
int indexA = 0;
public void run() {
     // Prevent use of / Pause scanner
     try {
          scannerLock.acquire();
     } catch (InterruptedException exc) {
          Gecko.logException("Scanner lock could not be acquired by expansion thread", exc);
     while (!autoExpansionComplete) {
          while (indexA < clonedArrayA.length) {
               int markerA = indexA + 10;
               for (int a = indexA; a < markerA && a < clonedArrayA.length; a++) {
                    pluginTreeA.addSelectionPath(clonedArrayA[a]);
               indexA = markerA;
               System.out.println(indexA + "," + clonedArrayA.length);
                    if (autoExpansionComplete) {
                         break;
               stop();
};

Well, since I've had no responses, I tried to think of other ways to speed the code up.
I'd already made nearly every tweak I know. The only additional thing I could think of was to use addSelectionPaths(TreePath[]) on a subarray of the cloned array, instead of addSelectionPath(TreePath) on the cloned array's elements, since obviously it would be fewer method calls. It has sped things up an awful lot (my new code is shown below - I've left in some things I chopped out above, so you can see exactly what I see). The problem is though, obviously an increase in initial velocity doesn't solve the problem of deceleration occurring, if you get me.
// Clone the selection arrays to non-volatile arrays for better access
// speeds
final TreePath[] clonedArrayA = selectionPathsArrayA.clone();
final TreePath[] clonedArrayB = selectionPathsArrayB.clone();
// Create a new runnable to perform the selection task
Runnable selectionExpander = new Runnable() {
     /** Position within cloned array A */
     int indexA = 0;
     /** Position within cloned array B */
     int indexB = 0;
     /** Length of subarray grabbed from cloned array A */
     int lengthA;
     /** Length of subarray grabbed from cloned array B */
     int lengthB;
     /** Subarray destination */
     private TreePath[] subarray = new TreePath[100];
     public void stop() {
          autoExpansionComplete = true;
          automatedSelection = false;
          scannerLock.release();
      * Grabs 10 blocks of each selection paths array at a time, adding
      * these to the tree's current selection and then moving to the next
      * cycle
     public void run() {
          // Prevent use of / Pause scanner
          try {
               scannerLock.acquire();
          } catch (InterruptedException exc) {
               Gecko.logException("Scanner lock could not be acquired by expansion thread", exc);
          while (!autoExpansionComplete) {
               while (indexA < clonedArrayA.length || indexB < clonedArrayB.length) {
                    // Set subarray lengths
                    lengthA = subarray.length;
                    lengthB = subarray.length;
                    // If subarray length is greater than the number of
                    // remaining indices in the source array, set length to
                    // the number of remaining indices
                    lengthA = indexA + lengthA > clonedArrayA.length ? clonedArrayA.length - indexA : lengthA;
                    lengthB = indexB + lengthB > clonedArrayB.length ? clonedArrayB.length - indexB : lengthB;
                    // Create subarrays and add TreePath elements to trees'
                    // selections
                    System.arraycopy(clonedArrayA, indexA, subarray, 0, lengthA);
                    pluginTreeA.addSelectionPaths(subarray);
                    System.arraycopy(clonedArrayB, indexB, subarray, 0, lengthB);
                    pluginTreeB.addSelectionPaths(subarray);
                    // Remember the latest index reached in source arrays
                    indexA += lengthA;
                    indexB += lengthB;
                    System.out.println(indexA + "," + clonedArrayA.length);
                    System.out.println(indexB + "," + clonedArrayB.length);
                    if (autoExpansionComplete) {
                         break;
               stop();
// Create and start new thread to manage the selection task runner
selector = new Thread(selectionExpander);
selector.start();I really can't think what could be causing the slowdown. I've done everythng I can think of to increase the velocity, such as cloning the source arrays since they're volatile and access could be slightly slower as a result.
Nothing I try gets rid of the slowdown effect though :(
- Dave

Can you please help me figure out why Firefox is so slow on my brand new computer?

Hi, my name is Michael Stevenson and I'm a long time Firefox user, but for the longest time Firefox has been extremely slow for me. I currently have a 4 month old PC that Firefox lags when opening tabs, scrolling pages, right clicking, typing, etc. The whole browser just feels slow. On this PC, even IE8 runs smooth and fast. So I know there must be an issue!
I currently have Firefox 6 installed, with all add-ons and unnecessary extensions currently disabled. My PC specs are: Windows 7 64 bit, Sandybridge i7 2.6ghz, 6gb RAM, Firefox+OS installed to SSD, ATI Radeon 6850M Graphics card.
As I do design and amateur developing for a living, I really need Firefox to be as snappy as chrome or (gasp) IE on this PC. Thank you for your help!

Try to create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Would someone please help me figure out why Time Machine has stopped backing up?

Hi, I am a Macbook Pro User running 10.6.8. I recently moved all of my photos, music and videos over to a 1TB Western Digital HD that I attach via usb. I believe that this is when the problem started. When I enter Time Machine, the last backup was on Feb. 17th, which I believe might have been the date that I moved everything.. Thankfully, I just happened to catch that my 2TB iomega HD that I had been using with Time Machine was no longer working, even though I have received no indication otherwise. I've poured over many queries on this site, as well as many others. I've tried deleting the TM plist file in my main file folder to no avail, reset TM and reselected the backup disc as well, but nothing seems to correct the problem. I have noticed, incidentally (or not), that my first backup date was one day short of a year before the last one. Maybe just a coincidence, maybe not, but worth noting, I thought.
I just tried a backup, and got this from Console:
Apr 18 14:50:07 Doyle-Hinsons-MacBook-Pro com.apple.backupd[1399]: Starting standard backup
Apr 18 14:50:07 Doyle-Hinsons-MacBook-Pro com.apple.backupd[1399]: Backing up to: /Volumes/Untitled 1/Backups.backupdb
Apr 18 14:50:08 Doyle-Hinsons-MacBook-Pro com.apple.backupd[1399]: Event store UUIDs don't match for volume: Macintosh HD
Apr 18 14:50:08 Doyle-Hinsons-MacBook-Pro com.apple.backupd[1399]: Forcing deep traversal on source: "Macintosh HD" (mount: '/' fsUUID: BB64A636-C7FA-3269-9643-D253B36CAEB5 eventDBUUID: 5C700854-D109-4ADA-970E-9DA378F0CBB5), {1, 1, 1, 0}
Apr 18 14:50:08 Doyle-Hinsons-MacBook-Pro com.apple.backupd[1399]: Node requires deep traversal:/ reason:must scan subdirs|require scan|
Apr 18 14:56:26 Doyle-Hinsons-MacBook-Pro com.apple.backupd[1399]: Error: Flushing index to disk returned an error: 0
Apr 18 14:56:26 Doyle-Hinsons-MacBook-Pro com.apple.backupd[1399]: Backup canceled.
I'm a bit of a novice at this, so explanations in laymen's terms would be greatly appreciated, and I express my deepest appreciation in advance to anyone willing to try and help.
Many thanks!

Thanks for your response, Linc. I have everything important to me i.e. pics, music, files, etc backed up elsewhere. Being that this is the backup drive I've used since the beginning, do I need to worry about losing other data that is on the drive, if I plan on backing up with a different one? In other words, is there irreplaceable data on the drive that a new backup won't be able to replace (data that's imperative to my computer's functions)? Thanks again!

Can someone please help to figure out why I can not read or burn audio cds?

I am unable to read or write an audio cd. Message keeps telling me to reinstall itunes. I have reinstalled 3 times.... Still doesn't work.

Hello Jackalope75,
The following article provides further detail regarding the nature of this message, and steps to restore functionality to your system.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
Cheers,
Allen

HT1933 I make a purhase on March 6 at 11:33 Order number MHOXX3TK9J for $1.99 and my credit card was charged $20.00 can you please help me find out why this happened

I made a purchase on itunes on March 6 at 11:33 order umber MHOXX3TK9J for 1.99 and my credit card was charged $20.00 please help me find out why this happened.

Contact iTunes support at the link below.
https://ssl.apple.com/emea/support/itunes/contact.html

Can someone please help me figure out how to "clear" recent email addresses used in Mail?

Can someone please help me figure out how to “clear” recent email addresses used in Mail? For example, as I begin typing a name/email address in the “To:” field, Mail begins suggesting addresses that I’ve previously used. I don’t want any suggestions unless they are in my contacts.
Another example: When using MS Outlook, it will also remember and suggest email accounts previously used, but I can arrow down and delete an account from the list so it won’t automatically popup or suggest in the future.
I appreciate any guidance in this matter.

The iOS email app stores all email recipients in a list of previous recipients which cannot be turned off. The email address autofill feature when addressing an email pulls from contacts and from the list of previous recipients which can't be prevented. There is no option to clear the list of previous recipients - not at the present time anyway.
If you don't want any suggestions, select from contacts instead when addressing an email.

Can you please help me figure out my i phone and how to use the features

i need some help on figuring out my phone can you please help me figure out how to use my i phone and the blue tooth features to listen to music or how can a friend or a relative send me songs for me to listen to.....

To listen to music with a headset or earbuds via bluetooth requires a bluetooth stereo headset.
File transfer via bluetooth is not supported. A friend or relative can purchase music for you via the iTunes music store with an iTunes store gift card or by sending you the music gift via email from iTunes.

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara

Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service.

Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service. I would prefer to talk to someone directly.

Are you using any disk cleaner or optimization tools like CleanMymac or Mackeeper?
Regards,
Ashutosh

My macbook pro will not play a video without pausing every 11 seconds. PLEASE help me figure out what is wrong. very frustrating

my macbook pro will not play a video without pausing every 11 seconds. PLEASE help me figure out what is wrong. very frustrating. I have already tried restarting

buckmacie,
has the video been completely downloaded onto your MacBook Pro when you start to play it? Or are you playing it while it downloads, AKA streaming it?

Please help me figure out why my i move program will not capture?? sound with my videos

Similar Messages

Maybe you are looking for