Please help me for icloud activation ???
Hello if the device is locked on any Cloud for more than four months is not a closure device or reporting that he stole should not consider your esteemed company this subject because I began to hate Apple this reason please help my devise and activation icloud !!!
and sory for bad english.
You need the previous owner Apple ID and password to activated the iPhone. There is nothing you can do to bypass it.
This is iCloud: Activation Lock
Similar Messages
-
I am using IOS 4.1 in Ipod touch. I would like to take my data back using icloud. I am not able to enable icloud in to my ipod touch. please help me for the same. Basically I am trying to take back to upgrade my ios to 5 or 6 version.
You can't back up to iCloud until you update to iOS 5 or higher. You will have to back up your iPod on your computer using iTunes. Update iTunes on your computer to the latest version, then connect your iPod to your computer, open iTunes, if iTunes give you a pop-up asking if you want to update your iPod, decline. Then click on the name of your iPod in iTunes, go to File>Devices>Transfer Purchases to transfer any purchased media to your iTunes library. Next, go to the Summary tab of your iTunes sync settings and click on Back Up Now to back up your iPod on your computer.
When it's done backing up, click on Check for Update (or Update) on the Summary tab of your iTunes sync settings. Allow your iPod to update, and leave it connected to your computer. At the end, it will restart and give you the option to restore to the iTunes backup you made earlier. Choose this option to restore your backup and sync your apps and other iTuens media to your phone.
This process is outlined in this article: http://support.apple.com/kb/HT4972, under "If you are attempting to update using a Mac or PC with which you normally sync". -
hi everybody,i have a ipad 2 wifi 3G , and i want to share my internet from ipad to an other ipad or pc , when i check setting menu,i cannt see ,"personal hotspot" ,please help me ,for active this option on my ipad
how can i ,install this function on my ipad ?please help me
is there any way for solution my problem?i mean that how can i personal hotspot or an onther application for this purpose
i will have a internet sharing by ipad for my labtop -
I want to transfer my Adobe CS3 licence to my new Laptop.
Please help me for Deactivate Adobe CS3 licence from old LaptopHi sanket chalke,
I'm not sure what Adobe product you need help with, but you might want to start with this document, which has deactivation information: Activation & Deactivation Help
Please let us know how it goes.
Best,
Sara -
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
HT1414 Turn Passcode Off is disabled in my iPod touch 5. Could you please help me for the same ?
Turn Passcode Off is disabled in my iPod touch 5. Could you please help me for the same ?
What do yoo mean?
-
please , help me for apple id....... i made new id but there is a credite card option and that's why i am not able to download any free application for iphone,.....so,.....what i do about this problem..???
You can create an Apple ID without a credit card by following this guide exactly: http://support.apple.com/kb/ht2534. Note that you have to start by downloading a free app, then create the ID.
-
I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.
1.)If i am using the continuous output mode.and the size of generated data is less than 32 MB.If i want to preload the memory,what should i do?I want that first of all i load all my data to onboard memory & then i want to make start the transfer between 6534 & peripheral.Is it possible?As per me it should be.Plz tell me how should i do this?I think that in normal procedure the transfer between 6534-peripheral & outputting data from pc buffer to onboard memory works parallely.But i don't want this.Is it poss
ible?
(2).Similarly in finite input operation(pattern I/O) is it possible to preload the memory and then i read it?Because i think that the PC memory will be loaded automatically when 6534 acquires the data and then when we use DIO read vi the pc buffer data will be transferred to application buffer.If this is true,i do not want this.Is it possible?
(3) One more question is there if i am using normal operation onboard memory will be used bydefault right?Now if i want to use DMA and if i have data of 512 bytes to acquire.How will it work and how should i do it?Please tell me the sequence of operations.As per my knowledge in normal DMA operation we have 32 Bytes FIFO is there so after acquisition of 32 bytes only i can read it.How it will known to me that 32 bytes acquisition is complete?Next,If i want to acquire each byte separately using DMA interrupts what should i do?Provide me the name of sourse from which i can get details about onboard memory & DMA process of 6534 specifically
(4).In 6534 pattern Input mode,if i want to but only 10 bits of data.and i don't want to waste any data line what should i do?Hi Vishal,
I'll try to answer your questions as best I can.
1) It is definitely possible to preload data to the 32MB memory (per group) and start the acquisition after you have preloaded the memory. There are example programs on ni.com/support under Example Code for pattern generation and the 6534 that demonstrate which functions to use for this. Also, if your PC memory buffer is less than 32MB, it will automatically be loaded to the card. If you are in continuous mode however, you can choose to loop using the on-board memory or you can constantly be reading the PC memory buffer as you update it with your application environment.
2) Yes, your data will automatically be loaded into the card's onboard memory. It will however be transferred as quickly as possible to the DMA FIFO on the card and then transferred to the PC memory buffer through DMA. It is not going to wait until the whole onboard memory is filled before it transfers. It will transfer throughout the acquisition process.
3) Vishal, searching the example programs will give you many of the details of programming this type of application. I don't know you application software so I can't give you the exact functions but it is easiest to look at the examples on the net (or the shipping examples with your software). Now if you are acquiring 512 bytes of data, you will start to fill your onboard memory and at the same time, data will be sent to the DMA FIFO. When the FIFO is ready to send data to the PC memory buffer, it will (the exact algorithm is dependent on many things regarding how large the DMA packet is etc.).
4) If I understand you correctly, you want to know if you waste the other 6 bits if you only need to acquire on 10 lines. The answer to this is Yes. Although you are only acquiring 10 bits, it is acquired as a complete word (16bits) and packed and sent using DMA. You application software (NI-DAQ driver) will filter out the last 6 bits of non-data.
Hope that answers your questions. Once again, the example code on the NI site is a great place to start this type of project. Have a good day.
Ron -
i need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.
ASk in the DW firum and be much more specific. Web page rendering issues are specific to specific versions of browsers and you may simply be using some bad code that messes up your page.
Mylenium -
TS1292 Please help me for, I don't have any code to redeem applications or to update application
Please help me for I don't have any code to redeem application or update applications
What 'redeem code' are you expecting, and why do you think that you need one ? iTunes gift cards are country-specific (they can only be redeemed/used in the country in which they were issued), if they aren't available in your country then you won't be able to get one. You shouldn't need a gift code in order to update an app.
-
I'm unable to play game in hp 15-r009TU.. what can i do for this. please help me for this
i'm unable to play game in hp 15-r009TU.. what can i do for this. please help me for this
Hi Madhuama, I'll try to give you a hand with this. First off, what OS is running on your notebook, what game are you attempting to play, and how is it not working? Is it not installing?
Thanks,
Fenian Frank
I work on behalf of HP -
Hi please help me for my blackberry 8900
hi please help me for my blackberry 8900 reload software. i make a password but stil not working now the screen is all white and the writen only is reload software 513....please help me
Hi bheth_16,
Welcome to BlackBerry Support Community Forums.
Try backing up your device via the BlackBerry Desktop Software and performing a clean reload of your device software. http://bbry.lv/bpv7DT
If the Desktop Software is unable to connect to your BlackBerry, try the following:
1. Verify that the BlackBerry Desktop Manager and BlackBerry Device Software are installed on the computer.
2. Remove the battery from the BlackBerry. Do not re-insert.
3. Connect the BlackBerry to the computer.
4. On the BlackBerry Desktop Manager main screen, click Application Loader.
5. Click Start.
6. Click Options to add or remove applications.
7. Click Next.
8. Click Next.
9. Click Finish.
10. When the application load starts, insert the battery into the BlackBerry smartphone.
This will remove all personal data from your BlackBerry. To restore your data you will need a previously taken backup file.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
I forgot restrictions cod in ipad air1 and don't off it , please help me for recovery this cod
i forgot restrictions cod in ipad air1 and don't off it , please help me for recovery this cod...
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.
And also see How to Recover Forgotten iPhone, iPad Restrictions Passcode. -
when i run installation itunes,i see this massage "there is a problem with this windows installer package.a program required for this install to complete could not be run. contact your support personnel or package vendor."please help me for installation itunes on my pc completely.
Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm. So will have to wait
-
Please Help! For some reason when ever I type in PSE it comes out very faint and almost invisable???
Please Help! For some reason when ever I type in PSE 10 it comes out very faint and almost invisable like. I'm not sure what I did but I cant get it back to the normal black font??? Please help. I know this seems like a very simple and easy question. I could use any advise. I've tried everything.
Further to what dominic said, in PSE 11 and 12, you get to Reset Tool by clicking the four-lined square on the upper right of the Tool Options area. In older versions, click the tiny triangle or tool icon at the far left of the Options Bar.
Maybe you are looking for
-
HPE 1420b Measurement Problems
I have an HPE 1420B freq/cntr board. I can read frequencies using the hpe1420b_stand_meas() NI driver calls (CVI 5.0), HOWEVER, for low frequency signals I get time-out errors. It is not symetrical across channels (occurs near 150 HZ on inp2 but low
-
Multiple Boot Camp Issues & Questions
Hello, I installed windows xp on my late 2008 macbook a couple months back. My Mac has 4gb RAM and 250gb HDD. I allotted 80gb to Windows XP, as I use it to run 3D Studio Max as well as Adobe CS4. Ever since the Mac side has been running sluggish (not
-
Hello frenz, Can anyone give me a sample XSL mapping program with proper explanations. I just want to know how to coin the coding for mapping. U'll be rewarded with points if it's with proper documentation. thank
-
Weblogic 9.1 - problems running Liferay portal
I'm working on getting the Liferay portal 3.6.1 working on Weblogic 9.1. Anyone here succesfully got it working!? So far i can get the ear file to deploy and start ok, but when i access the page in a browser i get alot of Exceptio
-
HP Probook 6570 WIN 8.1 64-bit sound not working, headphones works
After I unpluged headphones my speakers don't work anymore. Tried to reinstall IDT software, but no luck. My speakers properties show 3 audio jacks, but no internal audio speakers. Need help!