Please help me, i'm about to ditch my nano!!

Whilst charging my nano after not using it for quite some time (it was totally dead) I accidentally unplugged it after about 15 minutes while it said "do not disconnect" anyway.... now it won't turn on, won't charge when its plugged in, and my computer won't recognise it.
I have tried the 5 r's.
I can't restore or reset as my computer won't recognise it so what on earth do i do?!?!?! Please help me, have i murdered my nano??

I can't restore or reset as my computer won't
recognise it so what on earth do i do?!?!?! Please
help me, have i murdered my nano??
your computer doesn't need to recognise your iPod to reset it.
put HOLD on, then turn it off
hold the MENU and SELECT buttons down together for 5-6 secs
the apple logo should appear

Similar Messages

  • Someone please help. It's about DVD playback.

    OK, so I MADE a DVD on iDVD with my MacBook and I burn it with a "Maxwell DVD -RW DATA - Video" disc.
    So after my MacBook succesfully burned the DVD. I took it out and played the DVD on my old old DVD Player in the living room. Played fine, everything was great(Except one of the movies I had on there was all blue; no other colors, something must of gone wrong with the burning because in the iDVD project that section played normal). So I played it on my roommates computer, he has a old Toshiba running Windows XP, and it played perfectly(except that chapter that played in all blue). I take it back to my MacBook to play it and I insert the disc. The DVD program comes up but nothing happens. I click the play button and it says "Disc is not supported" or something like that.
    I do not get why it doesnt play, especially if I made the DVD on the same computer and it played on my old dvd player and on my roommates old computer.
    Can someone please help me?
    Thanks a lot.

    hiya - if this is a new mac (and you haven't played another disc yet) try putting in a bought dvd from your collection - it should then ask you to select a region
    once you have selected your appropriate region (remember that you only get so many changes) - try inserting your idvd disc and see how you get on - it should now recognise it and play fine
    let me know - it did work for me...
    good luck
    dc/uk

  • Microsoft support. Please help file a complaint about abuse of microsoft account support and peoples personal data.

    I was receiving technical support from the support phone number from a person in India.
    He began to ask me personal questions not related to the software and while he was asking these questions while working for Microsoft he was on another computer and website taking a paid survey for giving my personal information.
    I hung up the phone even though he attempted to call back.
    Who do I file a complaint with over the abuse and misuse of my personal information and account?

    Unfortunately your post is off topic here, in the MSDN Subscriptions feedback forum, because it is not feedback regarding the MSDN Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.) who
    happen to post their question in my forum, but please don’t ignore it.  The links provided below I’ve collected to help with many issues we’ve seen.
    For technical issues with Microsoft products that you would run into as an end user of those products, one great source of info and help is
    http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products.   Office related forums are also here:
    http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
    For Technical issues with Microsoft products that you might have as an IT professional (like more technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
    http://social.technet.microsoft.com/forums/en-us, and search for your product name.
    For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
    http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
    If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
    http://community.dynamics.com/
    If you really think your issue is related to the MSDN Subscription, and I screwed up, I apologize!  Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots of the issue
    (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing. 
    If you really have no idea where to post this question, then you shouldn’t have posted here, because we have a forum just for you!  It’s called the ‘Where is the forum for…?’ forum and its here:
    http://social.msdn.microsoft.com/forums/en-us/whatforum/
    Please review the topic of the forum you’re posting in before posting your question.  Moving your post to the off topic forum.
    Thanks, Mike
    MSDN and TechNet Subscriptions Support

  • Please, help a newbie:  Question about animating expanding containers

    Hi All,
    Short Version of my Question:
    I'm making a media player that needs to have an animation for panels sliding up and down and left and right, and the method I've been using to do this performs far slower than the speed I believe is possible, and required. What is a fast way to make a high performance animation for such an application?
    Details:
    So far, to do the animation, I've been using JSplitPanes and changing the position of the divider in a loop and calling paintImmediately or paintDirtyRegion like so:
    public void animateDividerLocation( JSplitPane j, int to, int direction) {
    for(int i=j.getDividerLocation(); i>=to; i-=JUMP_SIZE) {
    j.setDividerLocation(i);
    j.validate();
    j.paintImmediately(0, 0, j.getWidth(), j.getHeight());
    The validate and paintImmediately calls have been necessary to see any changes while the loop is going. I.e., if those calls are left out, the components appear to just skip right to where they were supposed to animate to, without having been animated at all.
    The animation requirement is pretty simple. Basically, the application looks like it has 3 panels. One on the right, one on the left, and a toolbar at the bottom. The animation just needs to make the panels expand and contract.
    Currenly, the animation only gets about, say, 4 frames a second on the 800 MHz Transmeta Crusoe processor, 114 MB Ram, Windows 2000 machine I must use (to approximate the performance of the processor I'll be using, which will run embedded Linux), even though I've taken most of the visible components out of the JPanels during the animation. I don't think this has to do with RAM reaching capacity, as the harddrive light does not light up often. Even if this were the case, the animation goes also goes slow (about 13 frames a second) on my 3 GHz P4 Windows XP if I keeps some JButtons, images etc., inside the JPanels. I get about 50 frames/sec on my 3 GHz P4, if I take most of the JButtons out, as I do for the 800 MHz processor. This is sufficient to animate the panels 400 pixels across the screen at 20 pixels per jump, but it isn't fast or smooth enough to animate across 400 pixels moving at 4 pixel jumps. I know 50 frames/sec is generally considered fast, but in this case, there is hardly anything changing on the screen (hardly any dirty pixels per new frame) and so I'd expect there to be some way to make the animation go much faster and smoother, since I've seen games and other application do much more much faster and much smoother.
    I'm hoping someone can suggest a different, faster way to do the animation I require. Perhaps using the JSplitPane trick is not a good idea in terms of performance. Perhaps there are some tricks I can apply to my JSplitPane trick?
    I haven't been using any fancy tricks - no double buffering, volatile images, canvas or other animation speed techniques. I haven't ever used any of those things as I'm fairly new to Swing and the 2D API. Actually I've read somewhere that Swing does double buffering without being told to, if I understood what I read. Is doing double buffering explicitly still required? And, if I do need to use double buffering or canvas or volatile images or anything else, I'm not sure how I would apply those techiniques to my problem, since I'm not animating a static image around the screen, but rather a set of containers (JSplitPanes and JPanels, mostly) and components (mostly JButtons) that often get re-adjusted or expanded as they are being animated. Do I need to get the Graphics object of the top container (would that contain the graphics objects for all the contained components?) and then double buffer, volatile image it, do the animation on a canvas, or something like that? Or what?
    Thanks you SO much for any help!
    Cortar
    Related Issues(?) (Secondary concerns):
    Although there are only three main panels, the actual number of GUI components I'm using, during the time of animation, is about 20 JPanels/JSplitPanes and 10 JButtons. Among the JPanels and the JSplitPanes, only a few JPanels are set to visible. I, for one, don't think this higher number of components is what is slowing me down, as I've tried taking out some components on my 3GHz machine and it didn't seem to affect performance much, if any. Am I wrong? Will minimizing components be among the necessary steps towards better performance?
    Anyhow, the total number of JContainers that the application creates (mostly JPanels) is perhaps less than 100, and the total number of JComponents created (mostly JButtons and ImageIcons) is less than 200. The application somehow manages to use up 50 MBs RAM. Why? Without looking at the code, can anyone offer a FAQ type of answer to this?

    You can comment out the lines that add buttons to the panels to see the behavior with empty panels.
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import javax.swing.Timer;
    public class DancingPanels
        static GridBagLayout gridbag = new GridBagLayout();
        static Timer timer;
        static int delay = 40;
        static int weightInc = 50;
        static boolean goLeft = false;
        public static void main(String[] args)
            final GridBagConstraints gbc = new GridBagConstraints();
            gbc.weightx = 1.0;
            gbc.weighty = 1.0;
            gbc.fill = gbc.HORIZONTAL;
            final JPanel leftPanel = new JPanel(gridbag);
            leftPanel.setBackground(Color.blue);
            gbc.insets = new Insets(0,30,0,30);
            leftPanel.add(new JButton("1"), gbc);
            leftPanel.add(new JButton("2"), gbc);
            final JPanel rightPanel = new JPanel(gridbag);
            rightPanel.setBackground(Color.yellow);
            gbc.insets = new Insets(30,50,30,50);
            gbc.gridwidth = gbc.REMAINDER;
            rightPanel.add(new JButton("3"), gbc);
            rightPanel.add(new JButton("4"), gbc);
            final JPanel panel = new JPanel(gridbag);
            gbc.fill = gbc.BOTH;
            gbc.insets = new Insets(0,0,0,0);
            gbc.gridwidth = gbc.RELATIVE;
            panel.add(leftPanel, gbc);
            gbc.gridwidth = gbc.REMAINDER;
            panel.add(rightPanel, gbc);
            timer = new Timer(delay, new ActionListener()
                    gbc.fill = gbc.BOTH;
                    gbc.gridwidth = 1;
                public void actionPerformed(ActionEvent e)
                    double[] w = cycleWeights();
                    gbc.weightx = w[0];
                    gridbag.setConstraints(leftPanel, gbc);
                    gbc.weightx = w[1];
                    gridbag.setConstraints(rightPanel, gbc);
                    panel.revalidate();
                    panel.repaint();
            JFrame f = new JFrame("Dancing Panels");
            f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            f.getContentPane().add(panel);
            f.setSize(400,300);
            f.setLocation(200,200);
            f.setVisible(true);
            timer.start();
        private static double[] cycleWeights()
            if(goLeft)
                weightInc--;
            else
                weightInc++;
            if(weightInc > 100)
                weightInc = 100;
                goLeft = true;
            if(weightInc < 0)
                weightInc = 0;
                goLeft = false;
            double wLeft = weightInc/ 100.0;
            double wRight = (100 - weightInc)/100.0;
            return new double[]{wLeft, wRight};
    }

  • Please help me, I'm about to lose it!!!

    I'm going to keep this short as possible.  I recently switched ISPs and have not been able to get my TC to connect me to the internet.  I reset the TC so that it would forget my old network settings.  I discovered I have a bad WAN port (since no matter what I do, before and after resetting the TC, the light above the WAN port does not illuminate when I plug in an ethernet cable), therefore I put the TC in bridge mode and still no success.  I just don't get it!!
    I am so tired of buying supposedly nice things because they are "reliable" and then they don't work.
    If it helps I am using an iMac with Mountain Lion OSX and my TC is a 2TB that is just over 1 year old.
    Thanks,
    Chris

    Unfortunately, another of many features that were dropped in the "upgrade" to Lion and Mountain Lion.
    Shaitzen.. what were they thinking; Or smoking??
    It is basic requirement to lock speed of a port.
    I hope Mr CWhitmarsh you do have AppleCare because otherwise this could be expensive episode.
    Try and figure out how the port got damaged.. did you have electrical storm for instance.. were other network devices taken out?? It is unusual to have just a single port on a single router.
    If the TC is just over a year it is out of warranty but should be a gen 4.. can you just check the rubber mat for the model number. A1409 it should be.. please confirm.
    If it is actually a bit older and gen 3 we are starting to see board faults which could include losing ethernet.. try leaving the TC off for a day and checking when you start cold.. it might only work for a few minutes but watch carefully.. even as it powers up, watch for the telltale flash of all the leds on the ethernet ports.

  • Please help me:one question about Assest Depreciation.

    In T-CODE ABAON I fill all of the necessary fileds and click save but the sap raise some error message like below.So in T-CODE AO90,I select chart of account->account determ->Depreciation,and input my G/L Acct 5201 in the field of 'Acc.dep. accnt.for ordinary depreciation' and save.Then I exit and go to T-CODE ABAON and try again,but the error still exist.It seems not work to what I have done in T-CODE AO90.I don't know why and how to resolve this problem.So I need your help.Thank you so much.
    error message:
    Account 'Acc.dep. accnt.for ordinary depreciation' could not be found.
    Message no. AU133
    Diagnosis
    When creating the accounting document, the system could not find account 'Acc.dep. accnt.for ordinary depreciation' for company code HJW1.
    Procedure
    Enter this account in the account determination for Asset Accounting.
    Message was edited by:
            Melody  H.

    Hi,
    Check the following:
    1. In ur asset class check the Acct determination & for this acct detr check the gl account in AO90.
    2. check ur GL accounts.
    3. Or are u making the changes in the same client or other & have u transported the request or not?
    or sometimes it is necessary to terminate the session and relogin then check.
    Regards,
    Meenakshi

  • Please help... confussed about speakers for MacPro

    Ok, I am seriously confused about speakers and sound cards for the MacPro...
    I posted another thread about 5.1speakers but reading more it seems the MacPro does not support this anyway (well only the DVD player does) and besides the Logitech Z5500 speakers are about as expensive as a full home theatre system!!!
    SO... If I just want good sound out of my MacPro for Music and DVD's what speakers should I look at?
    The local computer shop was asking about orange and black connections but the MacPro only has the Digital Optical Output or the normal 3.5'' jack, I think, is this correct?
    I think I just need someone to tell me exactly what connection I need to look for and which speakers they would recommend. Are the Harmony Sound Sticks II any good?
    Cheers,
    Andrew

    I don't have a Mac Pro (yet!) but the speakers I use with a MacBook are 'Bose' - I would suggest you have a look at the range on their web pages. Quality is very good. Check these out ...
    http://www.bose.co.uk/GB/en/home-entertainment/personal-audio/computer-speakers/ companion3/index.jsp

  • Please help I need advice about photoshop software!

    Hello there photoshop users! So I am semi new to using photoshop. I havnt purchased software yet because I want to make sure I purchase the right one. My plan is to take the photos I have taken and edit them to make into t-shirts. For example...I have this picture of me as the Queen of hearts for Halloween and I want to make it look like i'm actually in wonderland. I also want to take images from the internet and contstruct interesting photos. Which photoshop software would be best for me? I'm excited to start this new hobby I just need some good advice. Thank you!!!
    << comic sans removed to save reader's sanity >>

    I also want to take images from the internet and contstruct interesting photos.
    I hope by »take« you mean »purchase« or »use only within the bounds of so-called fair-use«.
    I have no experience with Photoshop Elements but supposedly that has Layer and masking capabilities, too.
    So, while I personally would recommend Photoshop, you could just download the free 30-day-trials for both Photoshop and Photoshop Elements to see which one meets your needs.
    And Gimp has been getting some positive mentions, so if you want to go with freeware that would be another option – again I have no experience with that.

  • Please help! it concerns about E71

    I need to download a windows live messenger to my mobile E71
    May I know from where can we install that software?
    And will they charge if I used it for chatting and stuff?
    Thankssssssss in advance!
    I'll be very grateful for your help

    You can download and install using the link below.
    http://europe.nokia.com/get-support-and-software/download-software/windows-live/compatibility-downlo...
    There could be network charges if you use GPRS or 3G but free if you use a free wlan.

  • Please help!!! about this damn triggers!?

    Hi,
    I wrote a trigger for a table in my database ,here is the code :
    DECLARE
         NO_NUMBER NUMBER(1);
         pret_nou number(10);
         BEGIN
         IF UPDATING THEN
              SELECT COUNT(*) INTO pret_nou FROM OCT_ART_DIF WHERE ART_NO = :NEW.art_no;
              IF NO_NUMBER != 0 THEN
              select sell_pr into pret_nou from article where ART_NO = :NEW.art_no;
                   update modif_pr set sell_pr=pret_nou where art_no= :NEW.art_no;
              END IF;
         end if;
    end;
    I have no compilation error but when it fire , the user who update the OCT_ART_DIF cannot save the data.
    Can anyone tell me why ?
    Thanks

    I'm afraid you misunderstood my reply. I didn't mean you
    personally couldn't select from that table, I meant Oracle does
    not permit any trigger to do any select or DML on the table to
    which the trigger belongs: you can't fire a trigger on SCOTT.EMP
    that selects from SCOTT.EMP. It's the law.
    The reason is simple: by definition the trigger is firing whilst
    the table is in a state of flux - you're changing the table data,
    that's why the trigger is firing. This means that a SELECT or
    any DML on the triggering data cannot produce predictable or
    consistent results.
    For instance, what value should a query return :NEW.column_name
    or :OLD.column_name?
    Or consider your particular case: you're checking for the
    existence of other records with a particular value. If you
    insert three records with that value, each time the trigger fired
    it would logically produce a different result -0, 1, 2. Is that
    correct?
    The answer to these questions is "It might be, it might not be."
    Oracle resolves these tricky problems by saying: you can't do
    that. It isn't pretty but at least it is consistent and
    predictable.
    If you really want to do this, then as someone suggested, you
    need to hive it out to a PL/SQL procedure. You can use DBMS_JOB
    to fire an updating routine in (say) 1 second's time.
    rgds, APC

  • Hi, Can Some One Please Help Me With Deleting Pictures Off My iPod Nano?

    Hi, can somebody please tell me how to delete all the pictures off my iPod nano? I accendenty transfered them all and I dont know how to get rid of them. Thanks
      Windows XP  

    I'm not sure about what you see in ITunes in XP, but this is how you do it in OSX.
    Open ITunes, connect your Nano. Click on the Nano and then Preferences (it's a drop under "ITunes"). Click on IPod, then Photos. UN-CLICK " Auto-Synchronize" and you should get a pop-up that ask if you wish to remove photos from your IPod. Click "Yes"and you are done. It worked for me.

  • Please help - Jpeg photos won't transfer to 2G nano

    Hello - I've recently upgraded from an ipod mini (1G) to an ipod nano (2G). I'm running firmware 1.1.1, and itunes 7.02.
    Whenever I try to transfer a jpeg photo to my nano, I get an error message saying - "Some of your photos, including the photo xx.jpg, were not copied the ipod because they cannot be displayed on your iPod."
    Strangely, bitmap (.bmp) files transfer across to my nano without any problem. I've tried the 5 R's but it's not solved the issue.
    What could be wrong? Help me, please!!

    Your sure it's one of the files mentioned here?
    http://docs.info.apple.com/article.html?artnum=304677
    I'm not sure whether there's a difference between JPG and JPEG files as you mention.

  • Please Help!!  I can rip cd to Nano but can play files only on my computer.

    Hello. I have a new iPod Nano and a new Philips compact stereo which can rip CDs directly to mp3 players. When I follow the procedure, all goes well, but when I try to replay the tracks on the iPod, they don't appear in any of the folders. Then, when I connect the iPod to my computer, the files appear and I can play them through the computer itself. I contacted Apple and they say that only music directly from iTunes is compatible. I need to know either how to convert the files to be compatible with iTunes or to get the iPod to accept these files as ripped. I hope I have used the correct terminology to describe my problem but if not, let me know and I'll try to clarify what's happening.
    The Apple support person I spoke with told me to check this forum for help. She figured someone out there has been able to do this successfully. Thanks for any assistance.
    HP   Windows XP  

    You can play standard MP3s on your Nano... but you MUST use iTunes to MANAGE your music. You don't have to use any special "iTunes compatible" format. What it sounds like you did was simply drag the music files directly to your Nano... or ripped them directly to your Nano using it as an external drive. The software in the Nano will not allow you to do that. When you connect it to your computer, your computer sees it just as an external drive and will let you play the files just as you would on any external drive. You should copy the files to your iTunes library... or just let iTunes manage your music for you. You will then be able to sync your music to your Nano. Basically, you have to use iTunes to put your music on your Nano.
    Message was edited by: JoeyR
    Looks like Rich beat me to it... but I'm glad my post was pretty much along the same lines as such an esteemed poster!

  • I have an old mini running os x 10.4 . im about to upgrade to 10.6 (the highest this dinosaur will upgrade to) but i have a ton of music recording software installed and need to know if it will affect it . please help ? any of it

    i have an old mini running os x 10.4 . i'm about to upgrade to 10.6 but have a ton of music and recording software installed and need to know if it will affect any thing i have installed . does newer garageband  work with older gband files ?please help ??

    Sorry about that, yes, 10.5 and 10.6 on Intel can run Firefox 4.
    Here's the process to roll back:
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
    You could install Firefox 3.6 over Firefox 4 (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
    Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
    Note: I haven't actually tried this myself!

  • New iPod Touch 5th generation won't charge. Help? It's brand new, I got it for Christmas in 2012. Please help! I've tried diffferent cords, outlets, and computers. I plug it in, iTunes recognizes the device, but it still won't charge.

    Please help. It started about a week ago, it was charging fine the day before and then I plugged it in and it didn't charge. Occasionally it would begin to charge, but sometimes not. I've tried different cords, USB ports, wall chargers, and computers but it would barely work. Now, it refuses to charge at all. If it dies, and I won't be able to use it anymore, I won't be able to get a new one. Please help me!

    It's still under its original factory warranty, so unless you've damaged it in some way, it should be covered.
    First, try giving it a reset. Hold down the sleep and home keys, past when you see the red power down slider and until you see the silver apple. Let it reboot and see if that helps.
    if not, contact your local apple store and make an appointment and let them check it out.

Maybe you are looking for