Please help me i m copletly messed up

i m usin an apple ipod 30GB black colour
when i connected the ipod to the PC, a window poped up askin if i wanted to update or restore my ipod i clicked on RESTORE and the next moment i disconnected my ipod. After my ipod is not havin any software in it, i tried again restoring my ipod by connectin it to the PC and clickin on ipod updater 2006-06-28, window shows initialiazing n then tht window doesn't responds
please help me
u can even email me at: [email protected]

If the iPod Updater is freezing on "Initializing..." for more than a few minutes, then try this:
1 - Close the iPod Updater (you may need to force it to clsoe through Task Manager).
2 - Go to your administrator account on your computer.
3 - Press the "CtrlAltDelete" keys to open Task Manager.
4 - Under the "Processes" tab, find "iPodService.exe", and end that process.
Go back and open the iPod Updater again, and see if you can try a restore again.
I hope this helps you,
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

Similar Messages

  • Please Help! Somehow I have messed up my password and now I am locked out of my iPod. Is there a way to get back in without losing all my photos?

    Please Help! Somehow I have managed to mess up my password and now I am locked out of my Ipod.  Is there a way back in without losing all my photos?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Please Help Me I Think I Messed Something Up

    So I saw on a website that I can make my computer faster if I type "sudo rm -rf /" into the terminal but now something is wrong with my Macbook...
    1: What did I do wrong and how do I fix it?
    2: Will this void my warranty?

    Welcome to Discussons.
    If you had any important data on your hard drive that was not backed up quit using your hard drive immediately so you don't overwrite data that you want to recover. To recover your data use disk recovery software such as, Data Rescue 3.
    Only reinstall Snow Leopard after your data is safely recovered.
    Once you are up and running again please report the post that got you into this pickle to save others from suffering the same fate.

  • Please Help my mac is so messed up

    O.K
    So recently i tried to install windows 7 through bootcamp but the install failed..
    So then i Restarted the mac by holding down the power button
    It gives me the message of:
    The Computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click 'ok' to restart the computer and then restart the installation.
    Restarted the computer each time i restart i get this message
    Pressed alt and all the other option commands
    Didnt work..
    Now i have no computer apart from this work one..
    HELP ASAP
    : will a new keyboard fix this
    : will an external keyboard fix this
    HOW DO I FIX THIS!!!!!!!

    EoinFullston wrote:
    Yeh i am trying to go back to osx
    Reboot, press and hold the Option key at the sound of the chime!
    Select OSX when the boot manager appears.
    Take the time to read the boot camp documentation, if you don't know how to switch OS it is likely that you don't know some other boot camp procedures and as boot camp can delete everything on your machine if done wrong .......
    And if you have not yet backed up the OSX installation, do it before you do anything else!

  • Please help! Ipod is so messed up

    Ok so when i put my ipod in it automaticly uploads my libray which there is no problem with me but when i unplug the ipod none of the songs are on my ipod
    U2 Ipoad   Windows XP  

    Re-check your setup for IPOD Device under Music.
    Make sure the settings are correct for the operation that you want to use.
    Make sure all your Windows XP updates are up-to-date.
    You didn’t mention the type of IPOD you had or Version your running?

  • Dock acting really weird - Please help!

    After installing the Mobile ME update and iTunes 7.7, my dock has been acting really weird.
    1. I usually set the default dock size at the smallest possible. However, now when you left click on the separator of folders and applications, it allows the dock to become smaller than possible when setting from the Preference Pane
    2. The dock automatically becomes smaller over time until the icons are really tiny.
    Is this a bug encountered by anyone else? It really bugs me that I have to keep pulling the dock to a standard size. Can someone please help me out of this mess?

    Hey VK
    Thanks for the quick response.
    I did just that. Deleted the com.apple.dock.plist under my user home directory/Library/Preferences.
    While it reset the dock, the problem still remains. You can view the problem by
    1. Setting the dock to the smallest possible size via the Preference Pane
    2. Turn on magnification and bring it closer to the left side of the adjustable bar
    3. Now, use your mouse to drag the dock by the separator
    Observation: The dock will become smaller than is "set" by the bar in Preference Pane
    4. Click on the bar in the preference pane, set at small, the dock will resize itself again
    5. Choose the dock to be set on the right
    6. Choose it to be set at bottom
    Observation: The dock is a LOT smaller than it could ever have been.
    7. Click on the smallest possible size in the preference pane, the dock resizes itself
    8. The dock keeps getting smaller over time still. =(!

  • Rating is being applied to EVERYTHING, not just the active image- please help.

    Seemingly out of nowhere a particular feature in LR stopped behaving the way it normally does for me.
    When I am in the Survey view (in the Library mode) and I have a number of images selected because I am trying to make my selections, it suddenly started applying my star rating to the entire set of say 10 images I have selected, and not just the one that is active. This is very strange- I have never seen it behave like this before. I can't remember hitting anything or changing any settings, but it just seemed to have started out of nowhere.
    It appears that if I go in and "manually" click on the star scale that appears below each of the images when you mouse over it, THEN it will apply the star rating to just that one image, but I can no longer just hit the "5" key and have just that one image that's active get the 5 star rating. It's doing it to everything.
    I've tried just restarting LR but that didn't change anything. Please please help, as this is really messing up my workflow.
    Thank you,
    Robyn
    I did visit the page below to confirm that it should indeed not be behaving in this manner:
    http://help.adobe.com/en_US/lightroom/using/WSEEE8FD0F-DFD8-47d0-A6FE-DD726E5F2E1A.html#WS 11A1E98C-3D8D-47b5-8335-4B9D8C3A5D36

    Rick,
    Thank you so much for your time and support!! Unfortunately I don't see that as an option . I'm including a screen shot of what I do see. Anything else you have to offer would be very much appreciated!
    thanks again!

  • Accidentally emptied trashbin with adware before restarting it, any remedies?? Please help!

    I overlooked the instructions on how to stop constant popups in safari running yosemite. I was normally experiencing same problems with yosemite like others.
    IM using early 2011 macbook pro.
    So i tried removing those mentioned like vsearch which i had no trouble finding in my finder, but i emptied my trashbin before restarting my mac.
    now after i restarted it, my mac's applications including safari are all not functioning, its pretty much useless right now.
    It prompts: (app) is unable to open because of a problem. Please check dev status etc.
    i tried running through safe mode but still safari, finder or other apps prompted same thing.
    CAn anyone please help me?? I messed up big time!

    What is the kava runtime and xcode?
    If you don't know, you don't use them and you can ignore that part of my comment.
    There are several ways to back up a Mac that is not fully functional. You need an external hard drive or other storage device to hold the data.
    1. Start up from the Recovery partition, from Internet Recovery, or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    If you use FileVault 2, then you must first unlock the startup volume. Select its icon ("Macintosh HD," unless you gave it a different name.) It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. Enter your login password when prompted.
    2. If Method 1 fails because of disk errors, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    3. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    4. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • Major DNS issue with my Partner Site PLEASE HELP...

    As a a business catalyst partner my partner site is completely down and all my corporate emails have been erased.  I built a new partner site using a business catalyst template and when I uploaded the new site to my partner site there were major conflicts with the default site-wide template and the files that I am unable to erase via FTP on the partner portal so the new template never fully worked. 
    So I moved on to Plan B - which was to open a new site as a "customer" under my own business catalyst account.  Uploaded the files and the site worked, now when I tried to take my partner account domain name and transfer it to my newly created customer account I ran into a second even larger issue.  It tells me the domain name already exists (as my partner domain) - please delete all files and try again (see screen shot for details.).
    It will not allow me to erase the partner account under my partner portal as the "Delete Site" feature is not there for my partner portal (see screenshots for example).
    Please help me straighten out this mess as my business site is completely down and all my corporate emails have been completely erased. 

    I actually had the exact same problem. If you are a premium partner and rebranded unfotunately the domain name can't be moved because your customer sites are tied to that domain name.
    So the only option is to create a new domain for your site. It sucks I know, but I can see why it has to be that way.
    If you have not rebranded, then contacting support might be able to change that for you.

  • Mystery--- PLEASE HELP!!

    Okay so I was in a session that I have been working on for days! all of a sudden all the tracks went to mute...except for external midi trakcs. but I couldnt find anything that was in solo. so I just pressed 'S' anyways...and all the tracks stopped doing it!! But then when I go to create a New mono track..there are dots next to input 1 and 2 in the selection window before you even create the track---this is the only session I have seen that in...it looks like this •input 1 and on the bottom •input 2, but all the other inputs have no dots next to them....Here is the real problem!!! ONLY THAT SESSION KEEPS CRASHING! i dont even need to press play...it will just crash on its own...it wont go past measure 5.1.1.1......Please help!! maybe i messed up something iin my environment. Idunno...Please help!

    Sound like a corrupted project. Disable the Core Audio (press control while launchin Logic) and bypass all the Plug Ins. Then bring them back one by one - as soon as you activate a corrupted Plug Logic will crash so you at least know what is causing this mess.
    If this doesn´t help you can at least retrieve all your Audio files and Plug In settings in order to export them into a fresh project, which of course is a pain in the bum....

  • Bought the iphone 5 today, and when i turned it on it made me set up the language and my origin of country. Then it made me set up wi fi settings but my wi fi settings are messed up! Now i can't proceed to press next! Please help!!

    Bought the iphone 5 today, and when i turned it on it made me set up the language and my origin of country. Then it made me set up wi fi settings but my wi fi settings are messed up! Now i can't proceed to press next! Please help!!

    No
    It says ' Your ipj
    your iphone could not be activated because the activation server cannot be reached. try connecting your iphone to itunes to activate it, or try again over the cellular connection in a couple of minutes. You can also try to activate using a Wi-Fi connection.'
    HELP:(

  • Hi, I am trying to convert my resume on pages to a word document.  When i export the file to to make it a word document ie(resume.doc) it messes up my whole resume on websites and pulls up a bunch of random words. Please help!

    Hi, I am trying to convert my resume on pages to a word document.  When i export the file to to make it a word document ie(resume.doc) it messes up my whole resume on websites and pulls up a bunch of random words. Please help!

    What exactly is the problem?
    Your description is so muddled I am having trouble working it out.
    How does your exported .doc file mess up websites? In fact what does it have to do with websites?
    Where, how and what are the random words turning up?
    Peter

  • Website all messed up after update! Please help.

    My site looks fine in Muse itself, but when I publish it, its messed up and not working properly. Please help!

    Which browser?

  • I upgraded some of my apps on my ipod touch, and one of them, my candy crush app is messed up, couldn't connect to facebook, tried re-installing it, same thing. now i have to start from the begining again in candy crush. please help

    I upraded some of my apps on my ipod touch, and one of them, my candy crush app is messed up, couldn't connect to facebook. tried re-installing it, same thing happened. now i have to start from the begining again, which really *****!! please help!!

    There is nothing wrong with the OS update.
    Delete ALL your email accounts.
    Restart Playbook
    Put the accounts back and ensure they are all set with PUSH ON.  Manual (push off) will burn battery.
    Similarly delete your wifi connections and add back when required. 
    Turn off wifi is not connected to wifi. 
    Any "hunting for connection" in email or wifi will burn up battery.

  • Just update my mac it said "critical update" something like that so i updated and now my screen has like random dots all over and the colours are all messed up its like negative can someone please help?

    just update my mac it said "critical update" something like that so i updated and now my screen has like random dots all over and the colours are all messed up its like negative can someone please help?

    Adds the ability to make and receive FaceTime audio calls
    Adds call waiting support for FaceTime audio and video calls
    Adds the ability to block incoming iMessages from individual senders
    Improves the accuracy of unread counts in Mail
    Resolves an issue that prevented Mail from receiving new messages from certain providers
    Improves AutoFill compatibility in Safari
    Fixes an issue that may cause audio distortion on certain Macs
    Improves reliability when connecting to a file server using SMB2
    Fixes an issue that may cause VPN connections to disconnect
    Improves VoiceOver navigation in Mail and Finder
    Provides a fix for SSL connection verification
    this was the update
    never said anything about the screen

Maybe you are looking for