PLEASE, HELP ME IF YOU CAN!!
hi guys
I am a window 7 user , photoshop element 9 tells me
"Unable to continu e because of a hardware or system error. Sorry, but this error is unrecoverable! "
I would appreciate any response or help on this problem!
Well... what IS your hardware?
How to ask a question http://forums.adobe.com/thread/416679
Some specific information that is needed...
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
My 3 hard drives are configured as... (WD = Western Digital)
1 - 320G WD Win7 64bit Pro and all programs
2 - 320G WD Win7 swap file and video projects
3 - 1T WD all video files... read and write
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And, finally, the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Similar Messages
-
I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can this is all new to me.
Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About? -
Got a problem with my Chatting-Room program, please help me if you can.
There is one bug in the code (should be just one), but I couldn't find it, I even recoded the whole thing, after I recoded the code, the same problem seems still there. I just can't find where the problem is. So I hope someone here can help me, thank you very much.
First, I made a Server and a Client. Server has 5 classes, and Client has 2 classes. My intention is that all the clients(running on other computers) will connect to the server (which is my laptop), and then they can communicate with each other. For example, if person A typed "Hello", person B and person C's computers will receive this message and display it.
The problem is that several clients can connect to the server (My laptop), but if one person type something, other people won't receive the message, it's blank on their screens. Maybe there is a problem when server receiving the message. So this is the problem I want to solve.
I have the code down there, here is a brife description what each class mainly does.
First class of Server is for connecting client, this class is named Server. Everytime a client is connected, the Server class calls the second class to store the client's information (which is its IP address), the second class is named People.
Third class is named Receiver, it is for receiving the massage from any one of the clients, then stores the message to a static field variable in Fourth class, fourth class is named Saying.
Fifth class of Server is named Sender, it is for sending the massage to the client, that message is the one that stored in Saying.
The First class of client is named Client, it prints any message that the server send to it.
The Second class of client is named SendFromClient, it wait for user to type something, and then send the message to the server, so server's Receiver class hopefully will get it and store it to the field variable in the Saying class.
Here is all the codes:
Server Class:
import java.net.*;
import java.io.*;
import java.util.*;
public class Server
public static void main(String[] args)
/*port number*/
final int port = 41333;
/*welcome messages:*/
System.out.println("This is FriendlyJ 1.0 running");
System.out.println("Listening on ports 41333");
try
/*Clear the ArrayList*/
People clear = new People();
clear.IPs.clear();
/*Create a server socket that will accept any connection on this port*/
ServerSocket ss = new ServerSocket(port);
/*keep getting clients*/
while(true)
/*connect with one client at a time*/
Socket s = ss.accept();
PrintWriter out = new PrintWriter(s.getOutputStream(),true);
Scanner in = new Scanner(s.getInputStream());
/*indicate one establish of connection*/
System.out.println("One connection estabolished!");
/*two classes, one foe receiving, one for sending*/
Receiver receive = new Receiver(in);
Thread ty = new Thread(receive);
Sender send = new Sender(out, s);
Thread yt = new Thread(send);
ty.start();
yt.start();
/*add IP to ArrayList*/
clear.storing(s.getInetAddress().toString());
out.println("There are " + clear.IPs.size() + " people online;");
System.out.println("Connected to " + s.getInetAddress().toString());
catch (Exception e)
System.out.println("System exception");
}People Class:
import java.util.*;
public class People
ArrayList<String> IPs = new ArrayList<String>();
/*A method for storing IPs*/
public void storing(String IP)
IPs.add(IP);
}Receiver Class:
import java.util.*;
public class Receiver implements Runnable
final private Scanner in;
/*Constructor to get the scanner*/
public Receiver(Scanner abc)
in = abc;
public void run()
Saying say = new Saying();
try
while(true)
/*waiting for input from client, then give it to Saying*/
say.setSaying(in.nextLine());
catch (Exception e)
e.printStackTrace();
}Saying Class:
public class Saying
static String saying = "";
public void setSaying(String a)
saying = a;
public String getSaying()
return saying;
public void resetSaying()
saying = "";
public int getlength()
return saying.length();
}Sender Class:
import java.io.*;
import java.net.*;
public class Sender implements Runnable
final private PrintWriter out;
final private Socket s;
public Sender(PrintWriter abcd, Socket abcde)
out = abcd;
s = abcde;
public void run()
out.println("Feel free to chat.");
int count;
Saying says = new Saying();
try
while(!s.isClosed())
count = says.getlength();
if(count>0)
out.println(says.getSaying());
says.resetSaying();
/*disconnect with the client*/
s.close();
System.out.println("Connection with " + s.getInetAddress().toString() + " is closed.");
catch (IOException e)
System.out.println("Network error!");
}Client Class:
import java.util.*;
import java.net.*;
import java.io.*;
public class Client
public static void main(String[] args)
Socket sc;
System.out.println("Welcome to FriendlyJ IM program");
System.out.println("Connecting to the server...");
int port = 41333;
/*A variable for storing IP address of Server*/
InetAddress ip;
try
ip = InetAddress.getByName("192.168.1.68");
sc = new Socket(ip, port);
System.out.println("Connected with Server");
Scanner in = new Scanner(sc.getInputStream());
PrintWriter out = new PrintWriter(sc.getOutputStream());
/*a thread for sending message to the server*/
sendFromClient sendin = new sendFromClient(out);
Thread sending = new Thread(sendin);
sending.start();
/*display welcome message*/
System.out.println(in.nextLine());
/*displaying how many people are online now*/
System.out.println(in.nextLine());
while(true)
/*print out the message sent by the server*/
System.out.println(in.nextLine());
catch(UnknownHostException e)
System.out.println("Couldn't find the host!");
catch(IOException e)
System.out.println("Network error!");
catch (Exception e)
e.printStackTrace();
}SendFromClient Class:
import java.io.*;
import java.util.*;
public class sendFromClient implements Runnable
private PrintWriter send;
public sendFromClient(PrintWriter sendto)
send = sendto;
public void run()
Scanner sc = new Scanner(System.in);
while(true)
/*get a message, then send to the server*/
send.println(sc.nextLine());
That's all, thank you for helping!
Edited by: stdioJ on Oct 31, 2007 3:58 PMHi pgeuens ,
I tried it ...but it didn't work for me.
I changed my .jsp like this
<%@ page language="java" %>
<%@ taglib uri="/tags/struts-html" prefix="html"%>
<html:form action="Registration.do">
UserName:<html:text property="username"/><br>
enter password:<htnl:password property="password1"/><br>
re-enter password:<html:password property="password2"/><br>
<html:submit value="Register"/>
</html:form>And i changed that web.xml like..
<taglib>
<taglib-uri>/tags/struts-html</taglib-uri>
<taglib-location>/WEB-INF/struts-html.tld</taglib-location>
</taglib>Now I am getting an error like ......."File "/WEB-INF/struts-html.tld"not found.
Hi Ashish
I didn't find struts-form.tld in WEB-INF folder.But all the remaining file all there.
Again I downloaded that struts1.2.9 ...in that also i couldn't find struts-form.tld file(except this remaining are there).
Please tell me, if there any other ways....
Thanks,
kona. -
hello sir
my system needs itunes64 file i don't know from where i should get this file cuz my iphone 4 is all the time synced with this computer all the back up are in this computer i dont want to lose it coz i did restore once so i dont have all the data in my phone i have it in itunes please help me with itunes 64
thank youBack up all data to at least two different storage devices, if you haven't already done so. One backup is not enough to be safe. The backups can be made with Time Machine or with a mirroring tool such as "Carbon Copy Cloner." Preferably both.
Boot into Recovery mode, launch Disk Utility, and erase the startup volume with the default options. This operation will destroy all data on the volume, so you had be better be sure of your backups. Quit Disk Utility and install OS X. When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups.
Transfer only "Users" and "Settings" – not "Applications" or "Other files." Don't transfer the Guest account, if it was enabled on the old system. Test. If the problem is still there, the cause is external to the machine, or else you're dealing with a bug or a hardware fault.
If the problem is resolved, reinstall your third-party software cautiously. Self-contained applications that install into the Applications folder by drag-and-drop or download from the App Store are safe. Anything that comes packaged as an installer or that prompts for an administrator password is suspect, and you must test thoroughly after reinstalling each such item to make sure you haven't restored the problem. -
I can't hear my callers but i hear them sometimes. It makes some weird cracking sound.
Apple just announced new products. It is ALWAYS busy this time of year. You just have to deal with it.
Alternatively, you can contact Apple Support and get assistance that way. Worst case scenario, they'll require a $19 fee to troubleshoot your device over the phone, which is refunded if it turns out you have a hardware issue.
Try them at https://getsupport.apple.com or 1-800-MYAPPLE and see if they can help.
But also try this:
Basic Troubleshooting Steps when all else fails
Quit the App by opening multi-tasking bar, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.
Relaunch the App and try again.
Restart the device. http://support.apple.com/kb/ht1430
Reset the device. (Same article as above.)
Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem. -
Motherboard not geting past MSI logo display - please help me if you can
Hello all
I have recently purchased a motherboard kit from a very respected retailer so all my components are compatible. It consisted of an MSI KT4V motherboard, an AMD Sempron 2600, a stick of 256MB DIMM, and a heatsink. I have installed them all as best to my knowledge but on booting up for the first time all I am getting is what looks to be an MSI logo screen. I have changed the jumper switches and tried other things but I am unable to get to the BIOS or anything.
Has anyone else had this problem or does anyone know of any methods I could take to try and resolve it ?
ThanksHello again.
First can I just say thanks to everyone who has posted a reply to me here. I have brought my motherboard manual in for any specifications that is needed, unfortunately my power supply is back at my flat but it came with a chassis I bought from a different company. I know it's 400w if that's any consolation.
Please understand that I am unable to get anywhere near BIOS - literally as soon as I power it up the power light comes on, you can hear the hard drives whirring, the DVD ROM spins, etc. but almost instantly an MSI logo is displayed on the screen and from there I can;t do anything. I am not given the chance to do anything before. Hitting Del does nothing, in fact the keyboard doesn;t even light up at all when I switch my computer on, almost as if it doesn;t recognise it or it doesn;t get as far as reading it or something. Surely there can;t be a problem with my graphics card as I'm guessing I wouldn't be able to see the dreaded MSI logo. I reseated most stuff like the RAM and swapped IDE cables etc. and that seems fine. I am really getting sick of seeing that infernal MSI logo screen !! -
Mail won't open - please help me if you can I'm feeling down .... and I do
Hello everyone - never used this before so I don't know quite where it will arrive - BUT, HELP - my Mail program just will not load - I press the icon in the sidebar and it just hops and that's it! I hold the menue open and click 'open' and the same, just one frustrating hop. I did notice yesterday something odd - some mail in had one subject, and then when I opened it, it was the content from another sender. Have updated to 10.4.8 in the last week. My summary comment as simply 'aaaaaaaaarrrrrrggggghhhhhhh!!!!!' - and I have so much in various mailboxes which I need to access on a regular basis.
Any ideas for a new boy who is somewhat challenged tech-wise????
Thanks
DavidIHello DavidI.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, proceed as follows to try to identify the problem:
1. Open /Applications/Utilities/Console.
2. From the File menu, choose either Open Console Log, or Open System Log, or both, so that the Console application displays the contents of both system.log and console.log.
3. In the Finder, go to /Applications/, and try to open Mail by double-clicking on it. Look at the bottom of the Console windows for messages that might be written there as a result. They may provide some clues as to what the problem is.
In the meanwhile, take a look at the following article, in case this is a font issue:
Font Management in Mac OS X Tiger and Panther
You may also want to read the following article:
Multiple applications quit unexpectedly or fail to launch -
Help me now.
Alternatives for Help Resetting Security Questions and Rescue Mail
Due to recent changes in how Apple handles this issue, the most successful
option is #5, below.
1. Apple ID- All about Apple ID security questions.
2. Rescue email address and how to reset Apple ID security questions
3. Apple ID- Contacting Apple for help with Apple ID account security.
4. Fill out and submit this form. Select the topic, Account Security.
5. Call Apple Customer Service: Contacting Apple for support in your
country and ask to speak to Account Security.
Note: If you have already forgotten your security questions, then you cannot
set up a rescue email address in order to reset them. You must set up
the rescue email address beforehand.
How to Manage your Apple ID: Manage My Apple ID -
Logic Crashing - Please help me if you can!
Hi guys
First time posted; Long time browser..
Alright So I have Logic Pro with various AU instruments etc
Its been going great for some time (months) and last two days Ive hit a bump.
We tracked it down to being nexus; (au instrument) however even disabled or removing the .component makes logic crash & Freeze.
At first it would freeze and crash; reopening and re enabling the plugin would allow it to work again for days without a issue. Now with The Plugin active or non active it plays 5 seconds and severe crash
Im unsure what to do.
Can someone shed some light on my situation?
Thank youI will try it tonight when Im home.
Do I completely remove all AU stuff and go all from scratch? I dont mind doing so if it works again.. Alot of au's to install..
Any other ideas on what may be wrong guys?
Thanks for you prompt reply too. -
Please help me if you can Svet!
Svet, I am new to these forums, been reading around here for a bit and see that you seem to be a very capable person. I have one favor to ask of you sir. Can you get your hands on the original Vbios for the r6950 2GB Twin Frozr II?
I saved my original bin, I swear! The problem is it was grouped with a bunch of other non-important files and I accidentally deleted it with the rest.Quote from: itsjustadeer on 11-October-11, 13:06:26
LoL
My first attempt at contacting customer support: fail.
I asked for the video bios for my r6950 Twin Frozr II and I gave them my serial number... and they reply with a link to download a video bios for an NVIDIA card and tell me to use NVFLASH.EXE to install it.
Hopefully the same person doesn't answer me this time
Yes, try again -
URGENT PROBLEM: Please help me if you can :(
i am developing a symptom sorter function in JSP and MySQL, where the flow of data is:
Select pain type e.g Ear
Select category e.g. Hearing Problems
Checkbox selections
fever
cough
tired
sick
A combination of these checkbox selections should take you to the appropriate result. e.g tick fever, sick and tired, then the symptoms should be displayed. NB You must have selected the pain type and category already.
HJowever if u tick cough with the paintype and category selected then a messasge saying no symptom found should be displayed.
My problem is the correct implementation method to use!
The data is already stored in a database, with every possible outcome already worked out!
I need to know
1. Is it better if i put the data read from the db into an object and then put that object into a session? Where the jsp then gets the object and displays the results on a new page!
If yes how do i do this?
2. Is there another method of completing my task.
Thanks again!The best way to accomplish this kind of view of the database is to follow the MVC Architecture. Just follow the following steps to display the appropriate view.
1)send the detailes checked/selected from the jsp to the ControllerServlet (Form action to be routed to ControllerServlet).
2)Write a Bean which takes the request object into the constructor and instantiate the same in ControllerServlet.
3)In the Bean get all the parameters from the request using req.getParameter("PainTypr")...etc.
4) check for the appropriate conditions based on the parameters obtained with existing database. and have a method in the bean to give the url back to the servlet. -- end of processing in Bean.
5) Back to the ControllerServlet redirect the request to the "url" as obtained from the Bean using response.sendRedirect(url);
6) if required write a Custom Tag to display the data in the desired format. which will be embeded in to the jsp that is displayed.
Just go through any MVC prototype for a clear understanding.
All the best
adios
praveen. -
Hello Guys.
I had problems in the Computer before and changed my HD. I saved in my all files documents in (Time Capsule). How can I put all my files, pictures documents on my new HD?
Please Help.
Thank You
Julio SkovHey
Thank you very much for replay.
Would you explain to me how can I do?
I don't really understand these processes.
Thak you very much
Julio -
I downloaded about 100 cds to my library and I can no longer view the downloaded artwork it's shows a black picture or blank. How can I get the artwork back? Please help! Thank you.
Hi- apparently I also had a similar moment of madness and thought that 'freeride games' would be fun. Well, so much for that! It added a ton of things to my tool bar, I would like to uninstall it, any suggestions for this one?
thanks :) -
Hi, i'm trying to update my iphone but this is the msg i'm getting, can you please help me. thank you. "the iphone ''C & M '' could not be restored. An unknown error occurred (3194)"
http://support.apple.com/kb/TS3694#error3194
This means that either your firewall/antivirus is blocking access to Apple's servers, or you have used your computer to jailbreak an iDevice in the past. The link above tells you how to resolve this issue. -
Why are songs/albums deleted off of the iTunes store? How can I get them back on the iTunes store? PLEASE help. Thank you.
Perhaps the copyright holders chose to remove them. What album were you after?
tt2
Maybe you are looking for
-
Problem while creating Invoice
Hi all, I am trying to create an invoice in BusinessOne using DI API. While creating invoice i am facing "Exchange Rate not Update "USD" " Error. In BusinessOne Foreign Exchange Rate was given for the docDate. Still i am getting
-
Impact of new order type Creation.
Greetings all SD experts, Currently, there's a new request in my company to create a new Sales Order Type via VOV8. Correct me if I'm wrong here but by creating a new order type, we need to also look into the item category assignment as well as the s
-
Hello. I am trying to write a Java file which read a text file( contains id numbers and student names) and sort the information. I'd like to read the text file line by line and sort on alphabetic order based on names. How can I sort the information b
-
I see the page labeled "manage" my subscription, but I can't figure out where to go to find the link to download the software to my laptop. I have it installed and running on my desktop machine, but I thought I could run in on both my desktop and my
-
Importing Captions from Aperture or iPhoto
I am creating a web site with iWeb. When I add pictures to iWeb from Aperture or iPhoto, the version name shows but not the Caption. How do I get the full Caption to show?