Please help me in properly reinstalling Freedome for Macintosh Yosemite
Hello, F-Secure Members I do not know what I have done to break my Freedome install. I think the proximate cause was reinstalling Mac OS X Yosemite and the using Mac Paw's Mac Cleaner 3 on it. I can honestly say though in this case I think it was my fault that caused the installation to malfunction. The reason being that no one else has reported any other problems with the same software combination damaging Freedome. I would be extremely grateful if someone could help me out in reviewing how to recover my Freedome purchase for Mac OS X Yosemite and then please help me with proper directions on how to reinstall. Thanks so very much in advance. Rich My machine is a Mac Mini Intel I7 4 Core running 2.3ghz late 2012 model. 16 Gigs ram @ 1600 mhz and 1024 Mb of Vram and Intel HD Chipet 4000. A 1 TB hard drive and my OS is MAC OS X Yosemite 10.10.4 Thanks so much for your help again.
Hi Enfcmedic384,
In order to make sure all traces of the previous version are gone, please proceed to uninstall as follows:
-Remove Freedome from /Applications.
- Delete the folders "/Library/Application Support/F-Secure/FSFreedome" and "~/Library/Application Support/F-Secure/FSFreedome"
-Remove "Your F-Secure Freedome Key" from your login keychain (it's in Passwords category).
-Reinstall the latest version available here.
Let us know should you have problems.
Similar Messages
-
Accidentally i have deleted the Safari, please help me how to reinstall it back, I'm using MacBookAir - MAC OS X - Version 10.5.8
Thanks
DimitrisIt would appear that your system is somewhat mangled, and it is time for some general 'servicing'.
Start here:
Repairing permissions is important, and should always be carried out both before and after any software installation or update.
Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
In First Aid, click on Repair Permissions.
This only takes a minute or two in Tiger, but much longer in Leopard.
Background information here:
http://support.apple.com/kb/HT1452?viewlocale=en_US
and here:
http://docs.info.apple.com/article.html?artnum=302672
An article on troubleshooting Permissions can be found here:
http://support.apple.com/kb/HT2963
By the way, you can ignore any messages about SUID or ACL file permissions, as explained here:
http://support.apple.com/kb/TS1448?viewlocale=en_US
If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
Once that is complete reboot again from your usual start-up disk.
More useful reading here:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/TS1417?viewlocale=en_US
For a full description of how to resolve Disk, Permission and Cache Corruption, you should read this FAQ from the X Lab:
http://www.thexlab.com/faqs/repairprocess.html
Reboot your Mac and then perform a Safe Boot:
Mac OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1455
Now try downloading and installing again. -
PLEASE help!! I use Outlook for my email and the Mail App Icon that is in my dock, that I know nothing about, was also storing all my emails. So, I tried to delete ONLY the emails in the Mail App but somehow (under Preferences maybe?) I also deleted ALL my OUTLOOK emails in my inbox. Can someone please please tell me if there is a way to get my Outlook inbox emails back OR EVEN the emails that were in my Mail app - because even tho I never use the Mail app, at least the emails would be there.
When I was trying to delete the emails in my inbox for the Mail app - I followed THESE directions. It did in fact clear my inbox for the Mail app. But then I went to log on to my Outlook account and EVERY SINGLE EMAIL was gone. And not in the Deleted box. Just gone. Here are the directions I followed that screwed everything up. Please help.
Top menu bar, Mail > Preferences > Accounts > Mailbox Behaviors.
Uncheck "Store deleted messages on the server".
At the drop list for "Permanently erase deleted messages when", choose "Quitting Mail".
Next...
Top menu bar, Mail > Preferences > General.
At "When searching all mailboxes, include results from", uncheck "Trash".
Select All = command Ai found out my prob!
here is what you do.
go to the "system preferences" on your dock.
click "software updates".
click "installed software"
if it shows something about a recent update about "EFI UPDATE, FIRMWARE, THUNDERBOLT" or anything like that, exit out of it.
go to mail.
click "mail" at the top.
click "preferences...".
find the account you are having trouble with, once you do, make sure its highlighted, then click the "-" at the bottom of the window (this will only effect that mail account, it will not effect your ical weather or not its synced thought that email account)
hit the "+" (right next to the "-") and add your accout back!
its something with that update that effected mail, i hope this works out for you, if not reply back -
Can a one please help me turn off auto play for Facebook the option is no longer in my General settings why is this ?
And yet the link you posted only tells you how to do it on the Facebook App for Android. Nothing about the Facebook page is mentioned at all, or how to do it on an iPhone.
With that said, and assuming you have the most up to date version of the Facebook App, you can now turn the auto play feature Off within the Facebook App itself. Tap on the "More" icon on the bottom right, then scroll down to Settings->Videos and Photos->Auto Play. If Smart auto-Play is on turn it off. Then you can set the check mark on "Never Play Videos Automatically" which is the same as Off. -
I have downloaded Photoshop Elements 12. When I doubleclick on icon, it says that sign in is required. I click sign in and it says I am not connected to the internet. Please help! I've been trying for 3 days.
Sign in, activation, or connection errors | CS5.5 and later
-
please help me i forgot the password for my iclaoud i can not open my the device
Try to reset your password here: http://appleid.apple.com
-
please help me with msi installer file for 11.6.8.* as this is our standard version which we use for all machines in our organization
arai-c wrote:
I have full version of this software but I am not able to install it silently because it always gives Google toolbar pop up which We dont required
arai-c wrote:
the problem is we dont have msi file for 10.6.*.* and hence I am not able to create package for it
I don't understand; two days ago you wrote that you have it, now you don't...?
If you don't have it, then why not deploy the current version 12.1.3.153 - I don't see the point of installing an old, unsecure software version. -
My phone was charging and then it wouldnt turn back on and the lock button is jammed so i cant really do anything. Please help me, i havent had it for very long.
i put that i held down the home button and all that... sorry, should of made my message a little clearer hun.. but i did try that, ive been searching video's on the net trying to figure out how to fix the problem, but nothing seems to be working... ive just tried pluging the usb lead into my phone while holding the home button then connecting it to my computer to see if itunes fires up, but even that didnt work... i dont know what else to try.
-
my iphone 4G buy from japan, i need to use in indonesian, please help me, i spent much money for this phone.....
froggy_vic wrote:
so even if your phone is unlocked you wouldn't be able to use it anywhere else.
Absolutely not true. There is no difference, spec wise, between the iPhone sold in Japan & the GSM iPhone sold everywhere else. iPhones in Japan use UMTS 2100. -
Please help me to find the table for fields where the descriptions are give
please help me to find the table for fields where the descriptions are given below
Customer Support Administrator
first line Support indicatorYou could also try table DD01T. In se 16,put in the description thats needed,you will get to know the respective data elements.
Then you can use DD03L to find the respective table. This would work if the data element is not generic.
Regards,
Anubhav. -
hello everyone, i need Mongolian keyboard layout, how can i find it, please help me, my pc is version OS X Yosemite, 10.10.2
CLICKY CLICK---> Multilingual Mac
-
Please Help?! Problems with Viber for iPhone 4s
Please help!
I have had problems with Viber for a while now and had given up! But now a few contacts only have viber and not other free messaging apps so I’m trying to use it again but still having problems.
I have uninstalled and reinstalled a number of times and still have not received an access code. My main problem though is the messaging it would work fine and then I wouldn’t be able to send any messages and I would receive a message go into the app and the message would not appear.
The other day I reinstalled it whilst at work and worked perfectly could send and receive messages easily. Then when I went home the problem stated again. I then uninstalled and reinstalled again and it worked perfectly, but now back at work I’m having the issues again! I can’t keep uninstalling and reinstalling is there a way this can be fixed?!
If anyone is able to help me out it would be much appreciated! ThanksYou activated "Find My Mac," which disables the built-in Guest account and adds a Safari-only "Guest User" pseudo-account. To get the Guest account back, you would have to disable FMM.
-
My phone was not backed up on icloud due to excess storage size for one month. Recently i lost some contacts by accident. and it was backed up on icloud again this morning .so I would like to reinstall from last month back up to get all contacts back. but when i connected to computer, I only have a choice to reinstall from last 5 months ago which was backed up on my computer manually. So, please help me how to choose to reinstall icloud back up from specific date from last month (eg. 02.02.2013). Thank you very much.
You cannot selectively restore from iCloud. You can only do a full device restore by resetting the device and choosing to restore from the iCloud backup during the setup process.
See: http://support.apple.com/kb/HT4859 -
Please help me how to maintain log for procedure execution
Hi Experts,
How to maintain the log for procedure execution
I want to maintain the log for procedures as below.
Once the procedure starts it should show status as RUNNING and PROC_END_TIME should be NULL.
Once the procedure completes it should show status as COMPLETED and shold show the PROC_END_TIME.
Once the MAIN_PROC completes then only the status of that procedure should show COMPLETED.
STEP_ID RECORDS_INS_UPD RECORDS_DELETED PROC_NAME PROC_START_TIME PROC_END_TIME JOB_STATUS ERROR_MSG
1 500 0 MAIN_PROC 1/4/2014 5:47:38.000000 AM RUNNING
2 100 0 SUB_PROC1 1/4/2014 5:49:30.000000 AM RUNNING
3 0 0 SUB_PROC2 1/4/2014 5:47:38.000000 AM 1/4/2014 5:47:38.000000 AM COMPLETED
I have tried the below code but it's not working properly.
CREATE OR REPLACE PROCEDURE procedures_log
p_seq NUMBER,
p_rec_ins_upd NUMBER,
p_rec_deleted NUMBER,
p_proc_name VARCHAR2,
p_start_time TIMESTAMP,
p_end_time TIMESTAMP,
p_job_status VARCHAR2,
p_error_msg VARCHAR2
IS
PRAGMA AUTONOMOUS_TRANSACTION;
BEGIN
IF p_seq = 0 THEN
INSERT INTO proc_log
STEP_ID,
ORG_ID,
TABLENAME,
RECORDS_INS_UPD,
RECORDS_DELETED,
JOB_NAME,
PROC_NAME,
JOB_START_TIME,
JOB_END_TIME,
JOB_STATUS,
ERROR_MSG
VALUES
p_seq,
p_rec_ins_upd,
p_rec_deleted,
p_proc_name,
p_start_time,
p_end_time,
p_job_status,
p_error_msg
ELSE
UPDATE proc_log
SET
RECORDS_INS_UPD = p_rec_ins_upd,
RECORDS_DELETED = p_rec_deleted,
JOB_END_TIME = p_end_time,
JOB_STATUS = p_job_status,
STEP_ID = p_seq,
ERROR_MSG = p_error_msg
WHERE UPPER(TRIM(PROC_NAME)) = UPPER(TRIM(p_proc_name))
AND STEP_ID = 0
AND JOB_STATUS = 'RUNNING';
END IF;
COMMIT;
EXCEPTION
WHEN OTHERS
THEN NULL;
END;
Please help me.
Thanks.ramya_162 wrote:
Hi,
I don't want to maintain multiple records for one procedure.
The log table will grow huge.
Please help me.
Thanks.
You have two options.
Either a running log, from which you periodically delete old records, or maintain a standing record for each process you are tracking.
Ok, let's take the second, since that seems to be your preferred method.
Going back to your original post, you gave us code and said "I have tried the below code but it's not working properly."
Please define "not working". That statement is totally devoid of actionable or diagnostic information. -
Please help me about jdeveloper application deployment for weblogic
At the beginning I just thought after developing an adf application then just deploy it as a .ear file and deploy it in the weblogic console and everything will be ok.But in fact I got a lot of problems. Then I got a tutorial for that and I do what it said step by step but some new problems occured. This is the tutorial I mentioned: [How-To: ADF Deployment Guide|http://www.oracle.com/webfolder/technetwork/jdeveloper/howto/11114/managedserver/wlsadfms.htm]
Now could somebody tell how did you deploy your adf application?
Here is the errors I got.
This is the install packege and the OS I use:
1. CentOS 6.3_x64 + jdeveloper11123.jar(include wls10.3.5) + adr(package name is ofm_appdev_generic_11.1.1.6.0_disk1_1of1.zip)[and just now I used a solaris11 vm from oracle and install jdeveloper11.1.2.3, the same probem occured as in CentOS.]
2. Win7_x64 + jdeveoper11123.exe(include wls10.3.5) + adr mentioned above
Here is the problems I get:
in the case 1,after I install the jdeveloper(using sun jdk 1.7), the weblogic seems to be well though I didn't configure a domain.But after I open an
application(which I get from the oracle jdeveloper tutorial demo,which works well in my Win7 env) and I run it, the integrated weblogic can't get
started. Firstly in the console it said the -jrocket identifier is not recognized, then I modify the setDomainEnv.sh and the startWebLogic.sh file in the
integrated wls domain (the one in the .jdeveloper directer) to set the JAVA_VM variable to -server.After that another problem came out: when the
wls goes to status "starting",it is blocked and I turn to the system monitor it shows that a java thread using more than 1GB of memory of my system
and occupy 150% of my cpu(it's a double-core computer). I wait for about 5 minutes when a error came said "PermSize is too small".then I modify the
setDomainEnv.sh file again to set the PermSize to be 1024m and MaxPermSize to be 2048.(the variable name is something like that, maybe not the
exactly right. I think you can understand which one it is.) But the problem is still there.
then in the case 2.Firstly the jdev and the integrated wls works well, but when i deploy an application which works well to a ear file and deploy it to a
standalone wls(10.3.5) it never works.the error is something referrence/dependences libraries is not found.Then I tried to new a server connection to
the standalone wls and I got the tutorial [how_to_deploy_adf|http://www.oracle.com/webfolder/technetwork/jdeveloper/howto/11114/managedserver/wlsadfms.html] , as the tutorial said I patch my standalone
wls with the adr and everything goes ok, no error reported.Then I tried the new server in the new machine under the manage of the adminserver and apply the
adf template in the localhost:port/em console. But after I restart the new server(by the console and then by the stop+startweblogic.bat file) the server is running
while the application in the new server is just "Unavailable". I tried this for three times in three computer, two of them are running win7,the other one is running winxp.
I don't know what is wrong and I am totally a newbie about this. Somebody please help me.Thanks a lot!
regard,Neo.Neo,
there are a couple of problems. First of all, jdev comes with it'S own jdk bundled in the product (jdk 1.6_x). Next thing is if you use JDev 11.1.2.3.0 to build an application you must use a wls 10.3.5 or 10.3.6 where you need to install the correct runtime onto. In your case you first install adf runtime 11.1.1.6.0 and then you need to install two patches which update the adf runtime to 11.1.2.3.0. These spathes are only available via support.oracle.com, meaning you need asupport contract to get them.
More information you can find in my blog http://tompeez.wordpress.com/2011/09/14/jdeveloper-versions-vs-weblogic-server-versions/
The rest of your problems go away once you have installed the right adf runtime on your server.
Timo
Maybe you are looking for
-
Can't open iPhoto after update to 9.3.2
I installed iphoto 9.3.2 yesterday on my MacBook Pro mid 2009 running on Mac OS X 10.7.4 but today the icon is greyed and it cannot open saying it doesn't work on this type of Mac. Please help! Do I need to re-install previous version and if so how d
-
I have gone on to IOS7 and i have an apple ID which is new. The old one was ditched and i can not now make Icloud work on the new apple id.I have phone finder on and will not let me delete the old i cloud account unitl the pasword is put which i dont
-
Why does the revealed image flicker when using the Show/Hide feature?
I started using the Show/Hide Button and Forms function in InDesign CS6 and have had some peculiar things happen. I was mocking up some samples and on the swf version if you hover over the left side of the blue rectangle all is fine but if you move t
-
AXI DB2 distributed sap systems and rsh
Hello, we are running sap with aix 5.3 and db2 v9. our application server, central instance and database are running on different servers. Until now we are using rsh to start the distibuted systems. security colleagues asked us to change to ssh. we h
-
Germany - Cannot Find my Online Number
Hello there, I purchased an online number several days ago here in Germany and still have not received it. I have search in my skype account and the only references about a skype number is how to buy one. I know that in Germany one has to wait a bit