Please help me in resolving the URL with parameters.

Hello,
Please help me in resolving the URL with parameters. If desformat is pdf, a pop up message �Acrobat Reader could not open �pa034922.fdf� because it is either not a supported file type or because the file has been corrupted���.
if desformat is html or xml, the following URL is working.
our requirement, report should be in pdf format.
http://servername:7778/dev60cgi/rwcgi60?server=Rep60_mclaren&&userid=bizsystest/test@business&destype=cache&desformat=pdf&report=salary_dept.rdf&p_dept_list=''ABE','ASE','CE','CHE','CS','DE','DIAL','ECE','ERC','IE','ME','PTE','ARC','ASE1''&p_status_list=''ACP','AD','AP','ATP','D','FE','HD','INS','P','RP','S','TF','TP','TS','ST','GS','O''&p_sex=''M','F''&p_order_by='Name'&p_totals='NO'
Thanks in advance,
Usha

We've seen this bug on machines running IE6 with a certain security patch (I forget its number). There's a thread in the Metalink reports forum about it. It appears to be somewhat tied to another problem where IE runs the report twice (you can see that in Showjobs. You're seeing the problem in 6i; I believe it persists in 9i.
The workarounds are (1) set Acrobat so it doesn't open within IE or (2) switch to a different browser, like Netscape. For workaround 1, Start Acrobat Reader, Choose File -> Preferences -> General, Uncheck Web Browser Integration
There's some evidence that it occurs more often with urls that include single quote characters. I think it's worse with XP, but I don't have any proof.
If you check Adobe's site, you will see this isn't just an Oracle Reports problem. I think we're waiting for Microsoft on this one, so don't hold your breath for a quick fix.
-- jim

Similar Messages

  • PLEASE HELP How to Activate the Correlation with the workflow ?

    Hi everyone,
    I am trying to retrigger a workflow with object (QMSM) using another Object event (BUS2007  event TECCOMPLETED )
    The objects are QMSM(complete task) and BUS2007(Plant Maintenance order) .
    I tried to do that using correlation but I am stuck in the following step because there is no name of the event there to choose from.
         *3.      Select the event for which the correlation is to be activated and the correlation to be activated*
    The procedure I used was from this link:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/26/0b8b3f81fef93de10000000a114084/frameset.htm
    Things done so far:
    Defining a Correlation
    Defining a Wait Step: Wait for Event with Correlation
    Not done:  Activating a Correlation
    Please help everyone.
    Edited by: SAMI JAPR on Apr 29, 2008 6:34 PM

    You need to add events under WF header, version-dependent---> events.
    Regards, IA

  • Please help me to resolve the problem fast

    Hello friends,
    I am building a webservice application using JDeveloper.
    The "Enbedded OC4J server" that comes with JDeveloper gets
    start when I run a normal application(that contains only .java and .jsp files) but when I do a simple webservice the OC4J server doesn't get start.What is the problem if any of you can help me fast to overcome the problem.
    Regards
    Prasenjit

    Which JDeveloper version are you using?
    Where is it installed on your machine?
    What is the full text in the log window when you try to run your application?

  • Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

    need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

    Try with the latest Apple driver package for Canon (released 15th Feb):
    http://support.apple.com/kb/DL899
    This solved my problem with the printing.

  • HT5312 I forget answer to my qustion with rescue email adrees please help me and send the answer to my main mail. Thank you very much

    I forget answer to my qustion with rescue email adrees please help me and send the answer to my main mail. Thank you very much

    We are fellow users here on these forums, you're not talking to iTunes Support.
    If you don't have access to your rescue email account, or you don't have one on your iTunes account, then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down this page to add/change a rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • When I make a call or recieve a call, the voice of the other person is not heard. but speaker phone works. what could be the trouble. could you please help me in resolving this? iPhone 4, iOS 6.1.3

    when I make a call or recieve a call, the voice of the other person is not heard. but speaker phone works. what could be the trouble. could you please help me in resolving this? iPhone 4, iOS 6.1.3.i had purchased my iphone 4  factory unlocked from usa last month.i am from india so will any apple service centre help me for this issue?

    They will help you just make sure that you make a appointment before you go into the store. Also if the iPhone needs to be replaced and you are not within your year of hardware coverage, that is when they will ask you to pay a fee.

  • Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

    Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

    Many, many thanks for both of you Todd and Rick.
    to Rick:
    I suppose you mean the Color Settings in Project Settings as follows:
    - Working Space: None
    - Match Legacy ... Gamma Adjustments checked ON
    But it does not correct the colors in effects. And checking or unchecking Make Movie/Output Module Settings/Color Management/Profile/Preserve RGB does not make any difference.
    to both of you:
    Those parts of the video image that does not have color effects are just fine. In these parts the color is preserved when reimporting to FCP. However, those parts having color effects (except Levels, as decribed earlier) have altered color results. So, only the parts having effects affecting color are misinterpreted in the image area. The mismatch is of course seen in AE, before making the movie.
    What I ment with "Color Management not working properly" is that (instead of "disabling" it) Color Management does not seem to be able to correct this "misinterpretation" or difference in effect handling between AE 6 and 10.
    So, would you have any solution for this problem?
    Again, many thanks for your fast replies!

  • Dear Friends, I am trying to draw a structure in Adobe Illustrator with 3D effect. But I am unable to give it proper shape. Can someone please help me for drawing the similar structure as showed below. I have facing problems in giving 3D effect.

    Dear Friends, I am trying to draw a structure in Adobe Illustrator with 3D effect. But I am unable to give it proper shape. Can someone please help me for drawing the similar structure as showed below. I have facing problems in giving 3D effect.
    Thanks a lot for your great help...

    i made a quick example:
    and what it's made of:
    just shapes and gradients. used a combination of pathfinder and shape builder to get the shapes exact.

  • Suddenly on sunday while i was working, my macbook Air stopped working, right after that i tried getting it on but nothing came other than a grey screen with a question mark right in the center could you please help me in rectifying the problem. Would th

    Suddenly on Sunday while i was working, my macbook Air which i bought last year in Spetember from Arkansas, Little Rock stopped working, right after that i tried getting it on but nothing came other than a grey screen with a question mark right in the center. Could someone please help me in rectifying the problem. Would thi issue also affect saved data. However, I have handed the notebook to Apple for reapirs and they will revert by Thursday 12/04/2012.

    I just received some horrifying news from Adobe about my production suite.  I just FINALLY learned today that what I've been trying to do for over a week now - CAN'T be done because of compatability issues involving updates of both Adobe & Microsucks Winders!!!  I sincerely hope this is not your problem.  Mine is ALMOST HOPELESS!!  Being in this HOPELESS Obamma economy,,,, leaves NO STIMULUS in which to currently upgrade everything that needs upgraded for me to fully use my INVESTMENT in Adobe Suite - sad, horrible and SICKENING!!!
    I just wanted to post this. And again, I truly hope you find a solution. Good Luck!

  • Please help me to solve the issue in my query.

    Hi All,
    Please help me to understand the mistake what i did in below query and help to resolve that.
    Actually i am trying to create a query to filter the records from db based on my input parameter.
       If my input parameter is 1(@showallrecords) then i need to show all the records which has the IsLatest as 1
       If my input parameter is 0(@showallrecords) then i need to show all the records which has the IsLatest as 0
    select * from tabel1 INNER JOIN tabel2    
    ON tabel1.KeyId = tabel2.KeyId 
    and (@showallrecords = 1 and tabel1.IsLatest = 1 )
    and (@showallrecords = 0 and tabel1.IsLatest = 0 )
    when i am executing the above query with the parameter @showallrecords = 1 ,db is returning 0 rows.If i am executing the above query after removed the last line and (@showallrecords = 0 and tabel1.IsLatest = 0 ) then records are coming.
    i understand that 1=0(last line) and the condition is not true.So its affecting the result.
    Please help me to solve this.

    select * from tabel1 INNER JOIN tabel2
    ON tabel1.KeyId = tabel2.KeyId
    WHERE (tabel1.IsLatest = @showallrecords Or @showallrecords=0)

  • PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"

    HAI EVERYBODY,
    PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
    step1 : i have taken SRM client 810 and named it as CHINNISRM
    step2 : i  have taken r3 client 810 and named it as CHINNIR3
    step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in   r3   and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
    step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like  "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client  named with T90CLNT810.
    oss :588701
    Solution
    There are different cases in which different forms of processing are
    required or where several options exist:
    - The logical system name of an R/3 Backend client was changed in
    current operation. In this case, the data hangs in the outbound
    queues of the R/3 Backend system as specified under point 1 of
    the symptom. In this case, the logical system name must be
    changed back to the original value. Then the outbound queues
    can be reactivated. If no data was transferred to the EBP/CRM
    server before the change, also a correctioin of the check table
    is possible.
    - The same logical system name was used again in a new client of
    an R/3 Backend system that was linked to the EBP/CRM server. In
    this case, the data is in the inbound queue of the EBP/CRM
    server with the exception GUID_FOR_LOGSYS_CHANGED. In this
    case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of  the R/3 Backend system you have linked has exactly the same
    data as the old client and if it is meant to replace the old
    client (that is, this was deactivated), also a correction of
    the check tables is possible. In this case, the inbound queues
    can be reactivated after the correction.
    oss:765018
    1. If the situation in your system corresponds to the situation described
    under "Reason and Prerequisites" and if symptom 1 occurs, you can
    delete the table entry from table CRMPRLS table (there is just one
    entry). Since there is no maintenance dialog for this table and you
    cannot maintain it using transaction SE16, you must use a report to
    delete it. This report is attached to this note as correction
    instructions.
    Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
    code from the correction instructions. You cannot implement this
    source code using transaction SNOTE.
    You can use the report in every plug-in or plug-in basis system, even
    if it is not specified in the validity section.
    After you have run the report, you can trigger existing queues again
    in transaction SMQ1.
    2. If the situation in your system corresponds to the situation described
    under "Reason and prerequisite" and if symptom 2 occurs, you can
    delete the entry from table CRMMLSGUID (there is just one entry).
    Since there is no maintenance entry for this table and you cannot
    maintain it using transaction SE16, you must use a report to delete
    it. This report is attached to this note as correction instructions.
    If they do not yet exist, add the following messages to message class SMOF in your logon language:
    Message Message short text
    303 User &1 is not allowed to change table &2.
    304 User &1 IS not allowed to display table &2.
    305 Logical system &1 was not found in table &2.
    306 System error! The current client was not
    found in table T000.
    Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
    source code from the correction instructions. You cannot implement
    this source code using transaction SNOTE.
    You can use the report for every release of the CRM system, even if it
    is not specified in the validity section. The only exceptions are CRM
    releases with Support Package versions that are too low such as CRM
    Release 3.0 with Support Package 12.
    After you have run the report, you can trigger existing queues again
    in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
    the CRM system.
    so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
    thanks and best regards,
    n.chakradhar

    Hi chakradhar,
    Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
    BR// 420

  • Can you please help me how resolved this issue.

    Hi Experts
    I am trying to connect LDAP by R/3 system. R/3 system connected to LDAP but when I am trying to find and pull the fileds in the "Find in the Directolry" option I am getting below error.
    LDAPRC 010 another server is referenced.
    Can you please help me how resolved this issue.
    With Regards,
    Trinadh Bokka

    You may be able to solve by using
    Note 1151329 - Depth of LDAP search is only one level below the base entry
    Markus

  • I forgot the code for my iPhone to access the Home screen I do , please help me try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

    I forgot the code for my iPhone to access the Home screen I do , please help me
    try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

    Hello polo-angulo,
    I apologize, I'm a bit unclear on the nature and scope of the issue you are describing. If you are saying that you are getting an error code (3004) when you try to restore your iPhone (because you could not remember your passcode), you may find the information and troubleshooting steps outlined in the following articles helpful:
    Resolve iOS update and restore errors in iTunes - Apple Support
    Get help with iOS update and restore errors - Apple Support
    Sincerely,
    - Brenden

  • Pls. need help..i'm using firefox 3.6.10 in windows xp it always crushes while playing farmville please help me to resolve my problem i already disabled some of my adds on but now i cannot totally open any games in face book.

    i'm using firefox 3.6.10 in windows xp it always crushes while playing farmville please help me to resolve my problem i already disabled some of my adds on and i re-install firefox, now i cannot totally open any games in face book. it says you must upgrade your flash player but it is updated. i tried to open it in google chrome and in other browser there was no problem. what should i do? please help me. thanks in advance. GOD BLESS!

    Looks like a problem with the MyWeb Search bar.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    Hi,  from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore...
    iPhone Reset
    http://support.apple.com/kb/ht1430
    Try this First... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

Maybe you are looking for

  • Animated GIF starts with rollover

    Hello! I want an animated gif to start when I roll over it. I tried this with a swap image, using the "still" version of the first frame and then setting the swap image to be an animated gif file (set directly under the still image. Doesn't seem to w

  • How do I delete an Unverified iCloud account email

    I got a replacement phone from the Apple store. Restored it to an old backup (by mistake). I wanted to do another restore and it needs me turn off the find my iPhone. The email I used to start the iCloud account has the wrong @XXX. So the address has

  • All music gone from iTunes and when trying to put it back, "Attempting to copy to the disk Macintosh HD failed. The disk could not be read or written to."

    Hello, I have a portable 500gb HD and I use it to put music and other stuff. Earlier, out of the blue, all of my music from iTunes disappeared, and I tried to put it back by dragging my folder "music" from the external HD to iTunes, but the message "

  • So who's tested CS3 vs. CS4?

    I haven't seen any tests yet, like the standard rotate blur test from retouch artists http://forums.macrumors.com/showthread.php?t=200558 or the more involved one at driverheaven: http://www.driverheaven.net/photoshop.php Anybody care to post results

  • Email stopped sending after iOS7

    After installing iOS7 my email won't send.  My email account is trying to send through an old SMTP server that is no longer listed and is not even the primary SMTP server. The SMTP server is one I used to use a long time ago and was removed sometime