Please help me make my inbox bigger my zoom button is not working

i updated my firefoz and my inbox became very small i need to make it bigger and the buttons on the top wont open

Temporary Solution: Settings > General > Accessibility > (turn on) Assistive Touch
This will enable a "Home" button on the touch screen.

Similar Messages

  • Please help me!! my apple id and password is not working on imessage and facetime activation!!HELP ME anyone

    Hey Everyone who read this,
    Please help me, Before my imessage and facetime is working with my email not my phone number. And then i try to change it with my phone number but always failed (i turned it off and on again but can't verify with my phone number). Then i erased my apple id on imessage and facetime, and the problem started, when i turning it on again and i need to enter my apple id and password, it said incorrect and i need to reset my password. And then i reset my password with a new one, and enter it again but incorrect again. I also try make a new apple id, but incorrect again. Besides, my appstore, game center, icloud can working with my apple id and password... Please help me with this issues...
    Thanks,
    Glory ([email protected])

    If you desire speedy resolution it helps to be more specific with error messages etc. when asking a question here.
    iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store

  • HT201401 Q) Can anyone please help me with this: My in coming call ringing tone not working?

    Q) Can anyone please help me with this: My in coming call-messges ringing tone not working? All I am getting in Vabration + Flashing light when receiveing messages or incoming Calls. I am missing my phone Calls constantly. Please Help me?
    I have just received this phone as a replacement from my insurance company, as I had lost my own phone. It has taken them 3 weeks to sort this out. This has ruined my business because it has taken so long. I really do not have time to send it back to them. Because it will waist another three weeks for them to sort it out again. Please Help!

    HA! By Jove I've Got it! it was simples..
    TURN ON THE RINGING ON / OFF BUTTON ON THE SIDE OF YOUR PHONE JUST ABOVE THE VOLUME BUTTONS. THEN MAKE SURE THE VOLUME IS UP TO THE HIGHEST. NOW JUST TRY THIS!
    I ALSO LOOKED UP A MANUAL ON IPHONE4:
    Ringtones, Ring/Silent switch, and vibrate
    iPhone comes with ringtones that sound for incoming calls, Clock alarms, and the Clock timer.
    You can also purchase ringtones from songs in iTunes. See Chapter 22, iTunes Store, on page 94.
    Set the default ringtone: Go to Settings > Sounds > Ringtone.
    Turn the ringer on or off: Flip the switch on the side of iPhone.
    Important:  Clock alarms still sound even if you set the Ring/Silent switch to silent.
    Turn vibrate on or off: Go to Settings > Sounds.
    Assign a different ringtone for a contact: In Contacts, choose a contact, tap edit, then tap
    Ringtone and choose a ringtone.
    For more information, see Sounds on page 139.
    THE REASON MY PHONE HAD NO RING TONE, WAS SIMPLY BECAUSE THE VOLUME WAS TURNED DOWN. :-/
    I HOPE THIS HELPS OTHERS INFUTURE!   :-D

  • Please help!  my iMac keeps freezing, mouse and keyboard do not work after

    Early this morning I turned on my iMac and started downloading updates through software update as usual. I was browsing a website in Safari when all of a sudden the "zoom" feature activated itself and I could not turn it off. I restarted and the keyboard started typing different characters but not letters, so I took out my installation CD and it took me quite a while to reboot the computer using the CD as a startup. Since the keyboard had a different input, the C key was not running the CD. I tried loggin into the support page, but it downloaded the links into the desktop. I used system utilities to restart the computer from the CD, I verified the Disk Permissions, then Repaired the permisions, then the Verify Disk and then the Repair disk, in that order. I restarted the computer and everything seemed fine, but after a couple of minutes the mouse starts closing windows, downloading website links into the desktop and then the keyboard freezes and does not let me type! This has repeated over and over, and I don't know what to do!
    Posting this message has been quite an achievement, because I have restarted the computer a lot of times in order to finish.
    Someone please help! I don't know what else to do!!!
    Thanks!

    Yes. And since you aren't backed up, you may have to use Prosoft Data Rescue to try to recovery any information that is critical. First though, do you have another Mac you can hook this one up to using Target Disk Mode?
    If you do, that's another way to rescue information. Target Disk Mode is explained here:
    http://docs.info.apple.com/article.html?artnum=58583
    Similarly, if you have a bootable external hard drive, you can try to boot off that with the Startup manager:
    http://docs.info.apple.com/article.html?artnum=106178
    To rescue your information. This at least will allow you to do further analysis to see what data corruption might have happened. If the drive is invisible when booted off another, that may indicate a directory issue. But first let's see if we can attach or boot off another and see the internal drive of the machine.

  • I have a 4th gen iPod touch and I can not connect to the Internet even though my iPad works and my computer let's me get into the Internet. It gives me a message cannot to server. Please help I have tried to reset it but that does not work

    I have a iPod touch 4th gen. And I cannot get into the Internet I get a message that say cannot connect to server. The other computer and my iPad still work with the Internet . I have reeked to reset it but that does not work. Please help me.

    I do not know wat "reeked to reset" means.
    Try the following:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Power off and then on your router.
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • Please help, after migrating to snow leopard Server my VPN is not working

    Hi,
    After migrated to Snow Leopard Server, my VPN settings are not working, My users not able to connect to VPN.
    Please find below log. Please let me know the solution for it.
    2010-01-05 13:19:32 IST Incoming call... Address given to client = 192.168.1.72
    Tue Jan 5 13:19:33 2010 : Directory Services Authentication plugin initialized
    Tue Jan 5 13:19:33 2010 : Directory Services Authorization plugin initialized
    Tue Jan 5 13:19:33 2010 : PPTP incoming call in progress from '95.222.205.164'...
    Tue Jan 5 13:19:33 2010 : PPTP connection established.
    Tue Jan 5 13:19:33 2010 : using link 0
    Tue Jan 5 13:19:33 2010 : Using interface ppp0
    Tue Jan 5 13:19:33 2010 : Connect: ppp0 <--> socket[34:17]
    Tue Jan 5 13:19:33 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x2794ebf2> <pcomp> <accomp>]
    Tue Jan 5 13:19:34 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x29205274> <pcomp> <accomp>]
    Tue Jan 5 13:19:34 2010 : lcp_reqci: returning CONFACK.
    Tue Jan 5 13:19:34 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x29205274> <pcomp> <accomp>]
    Tue Jan 5 13:19:36 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x2794ebf2> <pcomp> <accomp>]
    Tue Jan 5 13:19:36 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x2794ebf2> <pcomp> <accomp>]
    Tue Jan 5 13:19:36 2010 : sent [LCP EchoReq id=0x0 magic=0x2794ebf2]
    Tue Jan 5 13:19:36 2010 : sent [CHAP Challenge id=0x8d <620015595e4967664c1310241b4b3254>, name = "nova.thecoverstory.com"]
    Tue Jan 5 13:19:36 2010 : rcvd [LCP EchoReq id=0x0 magic=0x29205274]
    Tue Jan 5 13:19:36 2010 : sent [LCP EchoRep id=0x0 magic=0x2794ebf2]
    Tue Jan 5 13:19:36 2010 : rcvd [LCP EchoRep id=0x0 magic=0x29205274]
    Tue Jan 5 13:19:39 2010 : sent [CHAP Challenge id=0x8d <620015595e4967664c1310241b4b3254>, name = "nova.thecoverstory.com"]
    Tue Jan 5 13:19:40 2010 : rcvd [CHAP Response id=0x8d <c68742dc9457be5a61e444f00f53371d000000000000000044c6f89fa49ed8bf4c17a2861a2cfd 04ae1e6b9199527f9f00>, name = "jenny"]
    Tue Jan 5 13:19:40 2010 : DSAuth plugin: Error -25300 while retrieving key agent password from the system keychain.
    Tue Jan 5 13:19:40 2010 : DSAuth plugin: Could not retrieve key agent account information.
    Tue Jan 5 13:19:40 2010 : sent [CHAP Success id=0x8d "S=B503F226B4DE4105A4711C0EA2E7C21B1A9A935D M=Access granted"]
    Tue Jan 5 13:19:40 2010 : CHAP peer authentication succeeded for jenny
    Tue Jan 5 13:19:40 2010 : DSAccessControl plugin: User 'jenny' authorized for access
    Tue Jan 5 13:19:40 2010 : MPPE required, but keys are not available. Possible plugin problem?
    Tue Jan 5 13:19:40 2010 : sent [LCP TermReq id=0x2 "MPPE required but not available"]
    Tue Jan 5 13:19:40 2010 : Connection terminated.
    Tue Jan 5 13:19:40 2010 : Connect time 0.2 minutes.
    Tue Jan 5 13:19:40 2010 : Sent 0 bytes, received 0 bytes.
    Tue Jan 5 13:19:40 2010 : PPTP disconnecting...
    Tue Jan 5 13:19:40 2010 : PPTP disconnected
    2010-01-05 13:19:40 IST --> Client with address = 192.168.1.72 has hungup
    Thanks,
    Gulab Pasha

    Great !! save my trouble too
    thanks a lot for the tip.

  • Please help ..... simple JAX-WS Example does not work

    I tried out the simple Calculator Example described at http://weblogs.java.net/blog/vivekp/archive/2006/12/webservices_in.html (Vivek Pandey's Blog).
    and got following error message typing apt ...:
    error: Could not get TypeDeclaration for: jaxws_calc.Calculator_Add in apt round
    : 2
    Problem encountered during annotation processing;
    .\jaxws_calc\jaxws\Add.java:11: incompatible types
    found : javax.xml.bind.annotation.XmlAccessType
    required: javax.xml.bind.annotation.AccessType
    @XmlAccessorType(XmlAccessType.FIELD)
    In the code of the Add.java and the AddResponse.java there are only XMLAccessTypes/XmlAccessorTypes.
    My system property java.endorsed.dirs is set to C:\Programme\Java\jre1.6.0\lib\endorsed
    I copied the folowing jars in this directory (as the Java Web Services Developer Pack 2.0 had described) and some additionally from the jwsdp 2.0:
    dom.jar
    jaxp-api.jar
    jaxb-api.jar
    jaxp-api.jar
    jaxws-api.jar
    sax.jar
    xalan.jar
    xercesImpl.jar
    Can you tell me what else I have to do to avoid this mistake?

    Can u give the step that u hav done? & the code plz..?
    I did the same example, & it worked well...

  • The window displaying bookmarks is too large (suddenly happened with the new version). I can't figure out how to make the display smaller. Zooming out does not work on the bookmark menu display.

    I have version 4, just downloaded, and a Mac w. OS 10.6. 7.
    The bookmarks display (when I pull down "bookmarks") is much too wide. I can't figure out how to reduce the display size. The window is not persistent so I can't even get you a screen shot.
    Thanks, Sara

    It seems there was a change in Firefox 4 where the width of the drop-down is now determined by the length the longest bookmark name in the folder being displayed. Previous versions of Firefox would shorten a long name like that and add an ellipsis to signify the name was truncated.
    Sorry, I don't know how to change that other than to advise you to edit the name of that long bookmark name and make it less verbose. Just scroll down the list of bookmarks in that wide folder until you see the culprit, then right-click that bookmark and open Properties & edit the Name line at the top of that dialog.

  • Help Needed Badly | BlackBerry INC000025111306 | BlackBerry PlayBook - Tablet button does not work, almost stuck, copper under screen, seventh repair

    I was really Humilitated my RIM on this Ticket whcih i rasied.
    1) I bought a new tablet in last november in 2 months i had a Charger issue 
    2) They said this charger issue we cannot replace with new tablet and gave me a refurbished Tablet to me .
    3) Which also had same charging issue and they exchanged 2 more tablets and the last tablet which was given to me by RIM have a safety concern
     - 1 Small mesh of wire is poping out from the Tablet 
     - Power Button is very hard and its not that easy to press,
    So i raised the above ticket and was esclated internally with RMA as well and i got an update from the esclation agents that we will reply back in 2 Days i waited almost 3 weeks and called 2 times in this 3 weeks for an Update asking for a new tablet so that atleast once in all i can jeep a good 1 Tablet.
    But they never bothered to call me and today i called them again and RIM gave me a call back mentioning we cannot give a new tablet we can again check this tablet repair it and give it back , If we cannot repir then give a replacement new/Old tablet,
    I was wondering how can a tablet from RIM can go out without such safety concern ? How a mesh of wire can comeout of tablet so what safety norms RIM is follwoing for customer.
    AM i not humilitated? since after taking all these struggle tto get a good tablet i have been considered as bad.
    What RIM have to say for this, I am planing to take this to Legal department to follow how i can get a justice for this.

    I would have deleted this but can't find a delete?
    At any rate. got the Blackberry going again but it reset it and lost all the info, pictures and so forth.. oh well. at least it is still working.
    Thanks.

  • Could you please help me make this query less complicated

    could you please help me make this query less complicated
    select t1.R_OBJECT_ID
    from dm_relation_sp a, ddt_resolution_sp t1
    where a.parent_id = '0900000283560456' -----------ID
    and a.child_id = t1.R_OBJECT_ID
    union all
    select t3.R_OBJECT_ID
    from ddt_resolution_sp t3
    where t3.R_OBJECT_ID in (select t2.child_id
    from dm_relation_sp t2
    where t2.parent_id in (select a.child_id
    from asud_fsk.dm_relation_sp a, asud_fsk.ddt_resolution_sp t1
    where a.parent_id = '0900000283560456' -----------ID
    and a.child_id = t1.R_OBJECT_ID))
    union all
    select t4.R_OBJECT_ID
    from ddt_resolution_sp t4
    where t4.R_OBJECT_ID in(
    select t3.child_id from dm_relation_sp t3
    where t3.parent_id in (
    select t2.child_id
    from asud_fsk.dm_relation_sp t2
    where t2.parent_id in (select a.child_id
    from asud_fsk.dm_relation_sp a, asud_fsk.ddt_resolution_sp t1
    where a.parent_id = '0900000283560456' -----------ID
    and a.child_id = t1.R_OBJECT_ID))
    and t3.relation_name = 'RESOLUTION_RELATION')
    union all
    select t5.R_OBJECT_ID
    from ddt_resolution_sp t5
    where t5.R_OBJECT_ID in
    (select t4.child_id
    from dm_relation_sp t4
    where t4.parent_id in(
    select t3.child_id from dm_relation_sp t3
    where t3.parent_id in (
    select t2.child_id
    from asud_fsk.dm_relation_sp t2
    where t2.parent_id in (select a.child_id
    from asud_fsk.dm_relation_sp a, asud_fsk.ddt_resolution_sp t1
    where a.parent_id = '0900000283560456' -----------ID
    and a.child_id = t1.R_OBJECT_ID))
    and t3.relation_name = 'RESOLUTION_RELATION')
    and t4.relation_name = 'RESOLUTION_RELATION')
    Edited by: user13025450 on 29.04.2010 16:23

    Hi,
    Welcome to the forum! You'll find that there are many qualified people (such as Tubby) willing to help you. Will you do what you can to help them? In order to simplify the query you posted,someone will first have to understand what it does, what the tables that it uses are like, and what tools you have to work with (that is, what version of Oracle, and any other software you are using). To actually test their ideas, people will need versions of your tables.
    Many people, if they spent enough time, might be able to figure out roughly what you are doing, make some tables themselves and test a solution. You can help with all of that. I assume you already know what the appliction is, and what this particular query is supposed to do: you don't have to figure out any of that, you just have to say it. You know what all your tables are, what the datatypes of all the columns are, and what kinds of data are in the tables: you don't have to guess at any of that.
    Describe what you're doing. Think about it: how do we know that
    SELECT  NULL
    FROM    dual;doesn't do what you want?
    Post CREATE TABLE and INSERT statements for a little sample data.
    Post the results that this query is supposed to produce from those results. (Is it producing the right output now? Then it should be easy to post the correct results.)
    Describe, as well as you can, how the present query is doing it.
    Format your existing code, so it's easy to see what the different branches of the UNION are, and what the main clauses are in each one.
    When posting formatted text (code or results) type these 6 characters
    \(all small letters, inside curly brackets) before and after each formatted section, to keep this site from compressing the spaces.
    Say what versions of Oracle (e.g. 10.2.0.3.0) and any other relevant software you are using.
    I know it's a lot of work, but it really helps. You can do it as well (probably better) than anyone else, and if you're unwilling to do it, why should anyone else be willing?                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Hi.  PLEASE help me make my mac os x recognize there is an iphone connected to download pics

    hi.  PLEASE help me make my mac os x recognize there is an iphone connected to download pics thanks

    Morning Malika3,
    Thanks for using Apple Support Communities.
    Once you determine that your computer has a USB 2.0 connection, use the following steps to troubleshoot the connection between the device and the computer. Test after each step:
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/ts1286
    Hope this helps,
    Mario

  • My back and forward buttons do not work also the refreash button does not work, I have reloaded the latest version of fire fox and that did not help. HELP please.

    My back and forward buttons do not work also the refresh button does not work, I have reloaded the latest version of fire fox and that did not help. All of navigation tool bar worked until I updated Fire Fox, now if I click on a link in yahoo, for instance, I can not get back to my yahoo home page without reloading Fire Fox. HELP please.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

  • HT201263 my iphone 4 switched off on 70% battery and now wont switch on? also my home button does not work?please help

    My iphone 4 suddenly switched off on 70% battery and now it wont switch back on? my home button does not work either so i can not do the normal reset please help!!

    Sophierose21 wrote:
    my home button does not work
    Then it looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required... Be sure to make an appointment first...

  • I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

    I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

    I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

  • My 'clear history button is not working. When I click on it it doesn't do anything and the letter are gray instead if blue like usual. I've gone to every type of settings I can bit I don't know how to fix it. Please help .

    My 'clear history button is not working. When I click on it it doesn't do anything and the letters are gray instead of blue like usual. I've gone to every type of settings I can think of but I don't know how to fix it. Please help .

    T
    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

Maybe you are looking for