Please help me MSI 5950 ultra users...

Sorry my bad english.
I'm Hungaryan.
Send me please FX5950 Ultra-VTD256 original BIOS!
My brother crash my VGA bios.
[email protected]
THX!

Quote
Originally posted by MSIKING
Quote
Originally posted by eddy_71
Is there a way to obtain the original bios of msi vga cards and if so, how can i flash my card when i can't see anything on the screen? I would like to have the bios of the FX 5900 td-128.
Pci vga card i have!
Think about consignment then bios?
I hope!
Waaah, i don't sleep...

Similar Messages

Dual monitor problem with MSI 5950 Ultra

OK, I finally got the money to have a dual monitor setup.
I am using a MSI 5950 Ultra card
Soyo 600T Dragon Ultra MB
1 gb Corsair XMS 3500 ram
AMD 3000+ processor
Adaptec 2410SA SATA Raid card
4 Western Digital 74gb Raptors in RAID 0
2 V201S 20.1 inch Viewsonic LCD monitors.
XP Pro OS
I have updated all BIOS/DRIVERS on all hardware.
The problem is when I connect both monitors I get a system freeze. It is random and does not have to be event (ie mouse movement) generated. There are no event log entries. If I disconnect the analogue monitor the freezing goes away. Is this a known bug? If so when can I expect a driver/bios fix on the card? If not can anyone suggest a fix.
I have removed all non-essential cards.
THanks
Steve

Have you installed the driver of the monitor?

Urgent help with MSI KT4 Ultra

hey,
off my folks yesterday i got...
MSI KT4 Ultra
512mb DDR333 PC2700
Athlon XP 2600+
Maxtor DiamondMax9 40gb HDD...
i thought i had it all setup right with the HDD in IDE1, DVD and CD-RW in IDE2 and floppy in the floppy bit...
at 1st the CPU cwas only clocking at 1250mhz, but then came here and sorted that prob..... (Sperad spectrum then adjusted the FSB to 166mhz ) then after that, when i go to boot up i got.... "no device connected to the Fasttrack controller...bios not installed" then browing through the forum i found how to "solve" that problem... ( disabled the Serial ATA thing, dont know if thats right .... ) but now i dont get that "bios not installed" line any more.... all i get is a flashing line in the top left of my screen....
so to sum up....all i get now is.... that flashing line......what could be goin wrong?
Thanks in advance.....a very distressed...
//Simpo

This is an AMD board, so I will move your post to that forum.

Where are the MSI 645 ULTRA Users

Do U like my Avatar :O ?(
Its my custom UT2003 Skin 8o

TRY here
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_list.php?kind=1&CHIP=17&NAME=Archives
MSI 645 ULTRA Bios V1.09
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=43&MODEL=MS-6547
Drivers i use
AGP 113
IDE 202
http://www.sis.com/
:D :P ) 8o

Please help, how to guide the user to deploy a web application easily.

hello,
i have created an application which creates a new web application every time it is run. now i am writing the documentation of it and dont know which web server the client may have so i have to write / show to the user general steps that he should follow to deploy the web application after it has been created.
i have written that the user should deploy the web app by making the following entry into the server.xml file (for tomcat)
<Context path="/webappname" docBase="webapppath"></Context>
it is not compulsary that the user should place the web application in the webapps directory of the server hence the above webapppath is used.
now i want to indicate to him where and before / after which tag and under which host name etc the above line should be added in a manner that he is able to do it properly.
please anyone can help me how to do it.

i would like to know if there is any way without Java web start.
it has to be set manually.
i.e every user should make this entry in the server.xml so that the context is set.

Please help me msi ge60

my msi ge60 is killing me when it boot it will boot after 5 mints and the hard disk led always on
help me i dont know what to do the laptop s new help me
its lag every mint
activ smart program evry second give me wrong says:one or more drive attributestested show extreme abnormalitis. please backup.............
sory for my bad languge

looks like the HDD has a problem and need to be replaced

Urgent....please HELP....Different user Multiple submission problem

Hi all:
This is a STRUTS related problem
I have posted earlier about the usage of saveToken() and check isTokenValid(request) method. Because I wanted to make sure that the user doesn't click the "submit" button twice. I managed to achieve that, However what I want is the following:
suppose the user press the "submit" button more than once. The thread that executes the first request still runs, but has no means of providing its response to the browser. Hence, the user may be left with the impression that the transaction did not complete, while in reality, it may have successfully completed.
So I would like to know if there can be a complete solution that prevents duplicate submission and still ensures the display of a response that represents the original request's outcome.
some of you may suggest me to look at the article on JavaWorld
http://www.javaworld.com/javaworld/javatips/jw-javatip136.html
I have indeed, and downloaded their example and I ran it on my local app server, it DOESN"T claim to do what it is supposed to do, I clicke on the "OK" button more than once, and the second request just brings me to an empty page, because the ActionForward object returns NULL.
So if anyone, has solved this problem before, please do let me know...
I'd truly appreciate it...
Again, I would like to thank everyone for their time in advance.
Many thanks....

The solution on that site looks pretty good in theory.
What did you do to implement it?
Did you return a forward page from your executeSynchro method which you overrode to implement it?

Please help with msi k9a2 platnium

ok well i just finished building my rig.
its a Antec 900 case
2x 80 gb 7,200 rpm sata HDD
1x 720gb 7,200 rpm sata HDD
ATI hd 4870
AMD Phenom x4 9950
Thermaltake Water Cooler
CORSAIR Dominator 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
corsair 750 watts crossfire support
ok well i put it all together.
my power works and motherboard is all lighted up.
VGA has 3 red lights( means its workin)
all fans are up, leds are workin.
ok then when i switch on my power supply. before i turn on the system.
in the middle of my motherboard, i see a yellow led light. its small. i dun think its bad. so i continue.
i connect my screen keyboard and mouse. btw screen is new and tested. ( it works)
i turn on comp. Fan turns on, water cooler works, and lights flash.
then all of a sudden, nothing shows up on my screen. its blank. it says there is no signal. i checked my video card. everything is fine with it.
i check my ram and its all fine.
oh btw my motherboard is k9a2 platnium. and i see in the middle where the model is. its version 1.0
do i have to flash my bios?
if so how do i? cause i dun have a screen. and nothing will show up on my computer.
can someone tell me how to flash so that my phenom 9950 will work i think thats the reason or can someone help me. cause msi never picks up their technical support. ( its horrible) so help me plz. Thanks
Tam

Quote from: tamngoman on 16-August-08, 10:54:13
um i dunno where that pin is. where am i suppose to find it from? am i suppose to have it?
cause i connected the 4 pin on the bottom of it ( next to the audio ports)
Yes, its "tricky" a bit
Find and connect EPS/ATX12V 8-4 pin cable for the CPU. But deattach it 1st: /* Its 8pin, one piece by default */
Once done plug it to JPWR1:
Quote from: tamngoman on 16-August-08, 12:10:07
ok and that should fix the problem with the booting?
Yes, you can't boot without it.

Hello ... please help me MSI GE620DX

I am the model MSI GE620DX with i7 2630Qm , 8Gb RAM , nVidia GT 555M 2 Gb Hdd 750 Gb sata 2 7200RPM
I run Windows 7 Ultimate x64, my problem is: why stay black screen ~ 2 min
To see what I please, look at this video >>
I made test with Windows Professional x64, I installed OS besides DVD drivers so do ... I installed the drivers from MSI site as that is the problem. I did update bios :
old: E16G5IMS.10I
new updates: E16G5IMS.10P
And nothing, so do.
What could be???

Well I tried with two operating systems (and professional ultimate x64)
then oadata with DVD drivers received
the second time with drivers from MSI site .. http://www.msi.com/product/nb/GE620DX.html#/?div=Driver&os=Win7%2064
I do not know which driver could cause or ... are in the fog
this thing is when I bought the laptop, otherwise it goes well
only that the response is too late do not understand what could cause.
"try load last good known working configuration and see how its goes" << I not understand exactly what you mean

[Please Help]Does MSI Axis 945G support intel core2 duo T7600?

I have an idle CPU intel core2 duo T7600,so I am considering buying an AXIS 945GM to let it work.
I have a question ,does MSI Axis 945G support intel core2 duo T7600?
I checked the CPU suppot list on MSI website,I just found it suppots upto T7400.
Can I flash the new BIOS v1.23 to support T7600?
thank you!

According to the CPU Support List, this won't help. The best thing to do would be to contact MSI Technical Support. Maybe they can give you a more definate answer:
http://ocss.msi.com.tw/

Please help: New MSI R6770 with MSI MS-7093 main board doesn't POST

I'm upgrading my son's HP a1130n which has an OEM MSI MS-7093 main board. I purchased the MSI R6770 based on a local retailer's advice.
I took the following steps:
- upgraded the power supply to a Cooler Master RS500-PCARD3-US 500W
- set the BIOS to boot with PCI-E video
- installed video card, attached 6 pin power connector, and powered on
With the video card installed, the computer runs all fans at maximum speed. No POST beep.
After taking the card out, the computer returns to normal.
I thought I'd ask for advice here before returning the card. Thanks.

Thanks for the response.
I would have to purchase a card to try it. One of the main reasons I went with this card is that with the motherboard layout the RAM is directly in line with the PCI-E slot. Many of the NVIDIA cards have a long form factor with a large fan housing that would physically interfere with the RAM.
So there's a known problem with the current generation of ATI cards on some motherboards? In that case, going to a lower powered Radeon series wouldn't help?

Please Help Bios MSI RX9550 TD128

I need the original bios of MSI RX9550 TD128. I found in one page a vga bios for video cards with chipset Ati, but with that bios (RX9550 TD128) windows detect now like a MSI RX9550SE and works like a SE, very very slow =(
Anybody can help me? PLEASEEEEE!!!!!

Bad flash with out backup

Please help for MSI GX660 bad flash

Hello everyone!
I've writed to Online Custumer support on MSI Company, asking for new BIOS version fo my laptop. They send it to me, and i flashed BIOS successsfuly to new version, but i didn't like it becouse a lot of config menus were removed. I asked Tech Support for the original one, i've flashed it the same way, but laptop wont boot on now. Everything start exept of display.
I'm waiting them for answer from 1 week- nothing !! There is not MSI representive company in Bulgaria and i'm stuck :(
Also i want to say a lot things to MSI Customer support !!! For me - THEY bricked my laptop. And i can't understand how htey just stop write to me and leave me with this brick :(
Can anyone help with something ? Blind flash, recovery, other ?? Thanks a lot !

Quote
I didn't asket exactly for 1.0F but in 1st question i told that is my original version.
you should told them which bios version you are looking for,
as stock bios versions varry per models.
Quote
So, you reccomend to swap CPU, Ram , Video card with others to try if it could works?
Yes eventually
Quote
Can anyone give me 1.0F Bios for my GX660 and what is hiw auto recovery name so i can try blind flash/recovery ?
attached it below
but for recovery name is unknown.
you can try names: AMIBOOT.ROM , E16F1IMS.ROM
placed over FAT/FAT32 USB key, and use this procudure: https://forum-en.msi.com/index.php?topic=134435.msg1009999#msg1009999
just use your bios file names.
other option is to desoldier to bios chip, then to repprogram it and resoldier back
[assume your NB has no warranty]

Please Help! MSI 780Ti Gaming is not OC out the box as Advertised

Hi Guys
my new MSI 780T'i's arrived yesterday and the performance is great, only the core clock is 980MHz as apposed to the advertised 1020MHz
I did not receive a Gaming Branded disk either. However acording to the HARDOCP review: "If you do not install the software, then the card will default to "OC Mode" (with the frequencies described above.) In "Gaming Mode," the core clock drops to 980MHz with the boost clock at 1046MHz and in "Silent Mode," the core clock drops to 876MHz and the boost clock to 928MHz (the same as the reference card.) "
Out the box without the MSI drivers and latest Nvidia Drivers my card seems to be set in Gaming Mode???
Any help would be great

Quote from: J4K5 on 07-March-14, 18:08:16
my new MSI 780T'i's arrived yesterday and the performance is great, only the core clock is 980MHz as apposed to the advertised 1020MHz
All the "Gaming" cards default to Gaming Mode.
In your case:
http://www.msi.com/product/vga/GTX_780Ti_GAMING_3G.html
1020MHz Core (Boost Clock:1085MHz) (OC Mode)
980MHz Core (Boost Clock:1046MHz) (Gaming Mode)
876MHz Core (Boost Clock:928MHz) (Silent Mode)

I cannot access the internet, I tried to answer that said to go to settings, safari, tap clear history, cookies and cache, cut off, then on, but it did not work. When I go to internet the screen is grey??? please help I am a new user!!

I cannot access the internet the screen is grey, I have tried by using the answer from someone but it does not work...I went to settings, tap safari, then clear the history, cookies, and cache, then turn off ipad. When I did that twice, it did not work. How long does it take for the clear history to work? I am a brand new
user of the ipad2 and I am disappointed that this is happening already.

Have you been able to access the internet previously and now it's suddenly not working, or are you still trying to access the internet for the first time on your iPad? Are you at home trying to connect through your home router? If you are at home, did you put your home routers encryption code as your password? The encryption code is what your iPad is looking for and it is usually found on the router and is typically a 13 digit combination of letters and numbers. Let us know......

Please help me MSI 5950 ultra users...

Similar Messages

Maybe you are looking for