Please Help Me! My buttons stopped working all of the sudden.

I am not sure how this happened. I think some rain my have gotten on my BlackBerry. Maybe it seeped in or something. But I'm freaking out right now because I am receiving texts and i can't view them.
Anyway. The buttons aren't working. Only the trackball sort of works. A little. And I tried removing the battery twice. the device re-booted and went back to not working. It starts to type on its own : Ttgtgtgtgt.... and will only light up when i plug it in like as if to charge it.
PLEASE HELP!!!! I AM DYING WITHOUT MY BLACKBERRY

If you got it wet remove the battery immediately! Let the phone dry out thorougly for 4-5 days in a cool dry place in a bag of rice near an air conditioner if possible. Then try putting the battery back in and see if it works. Be patient! You can check for water damage by checking if the litmus paper on the battery and in the battery compartment (several) have turned pink.
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks

Similar Messages

Desktop Software Stopped working all of the sudden..

All of the sudden I got a windows message saying "Blackberry Desktop Software has stopped working" (A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.) I un-installed and re-installed the program and the same thing continues to happen. I have no idea what's going on. Has this ever happened to anyone else? Can someone help me out?

It happens to me too just now. I just had my laptop upgraded. before, i have it installed successfully without any problems encountered. in fact I was able to use it early yesterday before i upgraded my laptop. just now, when im trying to install the pc software, while installig it, it just gives a notification that it stopped. but later will show that i have successfully installed. but once you click to open the icon, it shows "Blackberry Desktop Software has stopped working". same with you i uninstall reinstall for 4x now, but still it isnt working.I even though it might be with my net connection, but it is not. I hope someone could help us.

Internet stopped working all of the sudden

I have a WRT54G router connected to my iMac and Mac Book, everything was working fine for the past three months, and all of the sudden no Internet either wirelessly or from a port.
If I connect my PC directly to the modem I can connect to the Internet. The Internet and port lights are turned on on the router. I can login to the router, but when I check the IP address it just shows 0.0.0.0, tried doing a DHCP release\ renew on the router, but nothing. Also, cannot ping any sites from the router.
These are the toubleshooting steps I've taken to try to fix the problem:
Restarted both the modem and the router.
Tried using a different ethernet cable from the modem to the router.
Reset the router.
Upgraded to latest firmware.
I have Comcast cable as my ISP. Has anyone seen this before? Thought I'd get some feedback before I call support.
Thanks.

1)access the router web ui
2)go to the Mac Address Clone subtab , enable it and click "Clone" . Save the settings
3)do a power cycle
4)check whether the router gets an internet ip add now ..

Left click stopped working all of the sudden. Help?

Earlier today, my MacBook Pro's trackpad button was working just fine. Now it's not. Whenver I press it, nothing happens. I can still move the cursor without a problem. I connected my Mighty Mouse to my MB Pro and everything in my MM works fine, except for the left click. Then I decided to shutdown my MB Pro and reboot it, hoping that it would get rid of the problem. After it turned back on, I realized that the left click is still not working, both on the trackpad and my MM. I even reseted my PRAM and that didn't fix my left click problem at all.
How do I get the left click working again on BOTH my trackpad and my MM?
Here are the specs for my MB Pro:
- MacBook Pro with 15 inch screen (Late 2006)
- 2.16 GHz Intel Core 2 Duo Processor
- Running on the latest version of Lion (10.7.5)
- 3 GB of RAM installed

I have this problem too! I just posted a question - how did you fix it or did it just go away? Mine computer is unuseable. Left click does some things but not all.
Here's my post
I can open MAIL but the MAIL menu doesn't appear at the top, and the LEFT click doesn't work properly, but right click does work! Command Q doesn't close the program, it's like it's half open. I can get rid of the page with the LEFT clicker (red button) and I can sort of select stuff in an email but it's grey. The buttons along the top work (Get mail, new message etc), but if I open a new message I can't do anything with it, there's no cursor.
Other programs the same (like Excel)
I restarted with the buton on the back, it'll work ok for a few minutes then not so ok. I managed to copy some files onto a hard disc and that all worked fine.
It seems to be all in the communication between the mouse/keyboard and the computer. Yes I have tried a wired mouse and keyboard, with the bluetooth one off, no help, same result.
This is not a result of new installation. There's no half-dead mouse hiding somewhere.
Help! Thanks

My power button stopped working all of a sudden now I can't turn my phone on or off, what should I do?

My power button all of a sudden got stuck and doesn't work, so I can't turn my phone on or off

No problem! FYI, if it's considered accidental damage or past the warranty time, you're looking at $199 USD. If it's within warranty time and not considered accidental damage by Apple, then it should be free.
Make sure to do a backup to iTunes or iCloud first, though, before you go, and make sure to schedule an appointment online at http://concierge.apple.com/reservation/us/en/techsupport/

Connection timeout when trying to access network. just stopped working all of the sudden. any ideas before i buy a new airport?

I've already rebooted and created a new network. No change. I was able to once get the network to connect and it took forever for a page to load. I'm thinking the base station is bad. It's 3.5 years old. The station still accepts internet connection and will route (hard wire) to my computer, but no wifi output. Checked my computer's airport with another network and was fine.

1)access the router web ui
2)go to the Mac Address Clone subtab , enable it and click "Clone" . Save the settings
3)do a power cycle
4)check whether the router gets an internet ip add now ..

2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light

2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light

The power supply is shot. But that it lasted even this long is the wonder.. not that it died.
The TC runs too hot..
Look on ebay for "Time Capsule power supply"
You can get a replacement and fix it although the economics are not so good.. it is probably time for a new TC.
If you can DIY it is really only a few dollars worth of capacitors that go bad.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
For a bunch of alternatives.

During app load, Premiere elements 11 stopped working all of a sudden. Why?

Premiere elements 11 stopped working all of a sudden. Says "A problem caused the program to stop working correctly" I re-installed it but still the same.
I haven't installed any other apps except adobe reader and there were a few Windows updates but that was it. Some history - I had defraged my hard drive when this started to happen. Wouldn't the re-install have fixed it if the de-frag caused this problem? What is causing elements to stop loading at the splash screen?

DFMA
Thanks for the follow up with the very helpful information.
If this is one of those Importer QuickTime type issues, the answers are few if any.
If you have not already tried
Have you attempted to delete the Adobe Premiere Elements Prefs file and, if necessary,
the whole 11.0 Folder in which it exists.
then, please try the following...
My expectations for the following are not high, but worth the time -
1 uninstall the usual Control Panel way - you might want to uninstall QuickTime at the same time.
2. free ccleaner run through (regular and registry parts)
CCleaner - Download
3. reinstall QuickTime and then Premiere Elements with anti-virus and firewall(s) disabled.
Others on the list...
1. Create a new User Account with Administrative Privileges and install and run Premiere Elements
from there.
2. Use a new set of installation files either from Adobe if you purchased the program from it as an online
download, or get tryout installation files for 11 into which you can insert your purchased serial number.
Photoshop Elements 11 Direct Download Links: Free Trials, Premiere | ProDesignTools
If the latter, read and carry out carefully the Note: Very Important Instructions in order to avoid an Access
Denied message.
We will be watching for your progress.
Thanks.
ATR

Speakers stopped working all of a sudden in my laptop HP pavilion g6 (windows 8)

Its been a year i bought lapi. i hardly used it.. My laptop speakers stopped working all of a sudden. I think its coz i upgraded my os from windows 8 to 8.1 (automatically). Even though i upgraded it still askes for upgradation every time i switch on the laptop..
Can anyone suggest me the issue..??
Thanks in advance for solution..

Hello San123,
Welcome to the HP Forums!
I will definitely assist you with the computer's issue regarding lack of sound from the speakers. Before anything else is done, please make sure you try every step in this thread: Troubleshooting Guide: Audio does not Work after a Certain Period of Time
If every step does not help, please provide the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Does this occur on certain programs, or all programs?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
5. What steps have been attempted from my first post on this thread, and what were the results?
Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Either way, let me know what happens. Thanks!
Mario
I worked on behalf of HP.

My i phone 5 stopped working all of a sudden and now it is not even getting connected to i tunes and i am not even able to switch it on

my i phone 5 stopped working all of a sudden and now it is not even getting connected to i tunes and i am not even able to switch it on..please suggest what to do??

Hi PriankaB,
Thanks for using Apple Support Communities. This article has steps you can try if your iPhone won't turn on that may help:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
- Ari

Using a first gen iPad. Video and audio from internet sites simply stopped working all of a sudden. Any suggestions? Thanks.

Using a first gen iPad. Video and audio from internet sites simply stopped working all of a sudden. Any suggestions? Thanks.

1)access the router web ui
2)go to the Mac Address Clone subtab , enable it and click "Clone" . Save the settings
3)do a power cycle
4)check whether the router gets an internet ip add now ..

HT4352 I have turned home share on my iPhone and my Apple TV and the remote app doesn't work all of the sudden. How can I fix this?

I have turned home share on my iPhone and my Apple TV and the remote app doesn't work all of the sudden. How can I fix this?

Welcome to the Apple Community.
Have you updated to the latest version of the Remote App.

Why does my 9810's auto rotate stop working all of a sudden?

My 9810's PIN is: 2978D267
As said in title, the auto-rotate has ceased to work all of a sudden. I've tried removing the battery several times for total reboot and no luck, also tried drawing the keyboard back and forth and no dice. the other anomaly being the inability of recharging its battery with either 1A or 1.5A, wall socket dependant.
I am on the sixth month of use, the place I purchased this handset from is no longer exists so I have no idea how the promised 2 years warranty is supposed to be.
I hope that I can get some clue from here. Thanks.
regardless of race, religion, social status, material, what not

Let's make sure we're on the same page. When you remove your battery, is your phone turned on? Yes = proper battery pull, no = nothing will happen.
If your phone is turned ON, then it's time for an OS reload using BlackBerry Desktop Software.
Try that and post back with your results.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Please help! "Photoshop has stopped working"

Please help me - message: "Photoshop has stopped working" - know what to do ... I can not use the newly installed photoshop program.
My problem is that as soon as (or about 5 seconds) after I opened Photoshop CC, I get an error message stating that "Photoshop has stopped working". I can not use my newly installed photoshop programs.
I have just the "factory reset" my HP PC with Windows 7 operating system. I have updated everything to be updated in Windows and signed me for Adobe CC at Adobe.com. Now I have installed Photoshop CC, CC Illustrator, InDesign, Acrobat Pro X1, ExtendScript Toolkit CC and Extention Manager CC.
I have uninstalled and reinstalled photoshop to see if the program works for it - but no, it does not. I have also tried holding down the three keys Shift - Ctrl - Alt, In connection with that I open the program (I googled the problem and someone tipped off that there could be a solution to the problem) but unfortunately also without success.
The thing is that all the other Adobe CC program works fully on the computer (InDesign, Illustator and pdf tool Acrobat Pro X1). They work flawlessly.
What to do?
Best Regards
SyssleOscar

Provide exact system info and the crash logs.
Working with your Operating System’s Tools | Mylenium's Error Code Database
Mylenium

I have a HP Pavilion dv6-6153ca Entertainment Notebook PC the youcam stop working all of the suddem.

Hello I currently have brand new HP Pavilion dv6-6153ca only 3 month old and the built in web cam stop working just like that.
I running window 7 after installing the HP assistant the webcam reference desapear from my device manager.
Can somebody please tell me how to get my camera back? how do i know if the physical part is broken?
somebody help me please.

id recommend backing up all of your data initally and doing a system restore an HP tech walked me through their
factory system restore option process from boot up, HP has a boot key function installed on the hp pavillion dv6
6153ca model(s) (all of their systems probably) calling the 1-800 support number is under warranty and free for
a system restore or at least it still could be, for me, it still was, the tech helped me out with initiallizing that process
which took approximately 15-20 min of his time to direct me on a factory restored install on my system on an unrelated
incident i had with windows 7 user locks and permissions i rendered inalterable or seemingly to me ,he helped me through
an HP factory restore and i was completed a few hours later with everything configured/installed/transfered if the
restore fails to reactivate the camera/or eliminate the conflict, you can remove the black plastic LCD screen cover
by unsnapping the plastic clip-based cover off around the perimeter of the screen and checking the white lead to the
top left of the camera or the power pin connection on the top right if theres a physical problem write down the camera
part # and you can order a replacement cam from HP or use the part number online at a search engine and procure/get the
part there either a tech or yourself could do the replacement from there

Please Help Me! My buttons stopped working all of the sudden.

Similar Messages

Maybe you are looking for