Please help me. My screen has a brighter portion

Hi I have a HP w1907 when I turned on the whole pc unit it turned on and it's dislpaying normally, but when I turn off the monitor and turn it on again the screen has a portion that is much brighter than the other.I tried Auto Correction, Gamma adjusting, everything. When I adjust the brightness, contrast, and sharpness the screen adjusts with the normal portion of the screen. I had this monitor for 8 years now but is barely being used. This is the first time I had encountered this problem and I really need help please respond.

Can Apple block this phone, they hacked my phone, it was on password they brake it and post on my facebook their pictures , i cant understand their behavior, i see on find my iphone mao where is my phone , no way to help from Apple ?

Similar Messages

  • Please help! My screen has gone blank, and more problems!

    Hi, I hope someone can help!
    1) Yesterday, I was listening to my ipod and changing the songs, when it suddenly the songs began changing on shuffle every second mid-song!
    2) Eventually it stopped, but then it really slowed down and would take about 5 seconds to react to me pressing the buttons or changing a song!
    3) Then today, after I had finished using it whilst running, the screen went completely blank, but the music was still working fine. The screen is now still blank, unless I tip it vertically and then I can just about make out an extremely faded outline of the wrting and page format. Also there now appears to be a white smudge/mark on one side of the screen!
    What is happening to my ipod and what can I do about these problems? I have had my ipod for only a couple of months!
    I would be very grateful of anyone could help!
    Thank you,
    Inass (London)
    nano   Windows XP  

    Please help my ipod will now not even switch on! What should I do?
    Hi, I hope someone can help!
    1) Yesterday, I was listening to my ipod and changing
    the songs, when it suddenly the songs began changing
    on shuffle every second mid-song!
    2) Eventually it stopped, but then it really slowed
    down and would take about 5 seconds to react to me
    pressing the buttons or changing a song!
    3) Then today, after I had finished using it whilst
    running, the screen went completely blank, but the
    music was still working fine. The screen is now still
    blank, unless I tip it vertically and then I can just
    about make out an extremely faded outline of the
    wrting and page format. Also there now appears to be
    a white smudge/mark on one side of the screen!
    What is happening to my ipod and what can I do about
    these problems? I have had my ipod for only a couple
    of months!
    I would be very grateful of anyone could help!
    Thank you,
    Inass (London)
    nano
      Windows XP  

  • My ipod touch screen has turned white. the screen has turned bright white. it is not going by reseting also. when  i  shift screens then it leaves a trail and i dont know what to do. please help.

    my ipod touch screen has turned bright white. the things are visible but partially and when shift the screen it leaves trails behind. i dont know what to do help please.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • IF YOU HELP MY NANO upgraded when you install PERFECT BUT DOES NOT APPEAR ON THE SCREEN NOTHING BUT as if you were OFF if turned PLEASE HELP OR MORE AND HAS THE NEW UPDATE

    IF YOU HELP MY NANO upgraded when you install PERFECT BUT DOES NOT APPEAR ON THE SCREEN NOTHING BUT as if you were OFF if turned PLEASE HELP OR MORE AND HAS THE NEW UPDATE

    iPod not recognized in 'My Computer' and in iTunes for Windows

  • Please help. my address bar has vanished. i have no idea how to retrieve it, so can only access bookmarked sites when using firefox.

    please help. my address bar has vanished. i have no idea how to retrieve it, so can only access bookmarked sites when using firefox.

    Make sure that you do not run Firefox in Full Screen mode with all toolbars hidden.
    * Press F11 to toggle full screen mode (Firefox/File > Full Screen)
    If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
    * If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
    * If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
    * If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
    See also:
    * http://kb.mozillazine.org/Toolbar_customization

  • My iphone 3g is not charging and the middle button has stoped working please help. My phone has no power now

    My iphone 3g is not charging and the middle button has stoped working please help. My phone has no power now an i need help

    For a broken home button you can find your options here http://www.apple.com/support/service/

  • 8600 entry screen has gone bright can't see options. how to fix

    the entry screen on my 8600 has gone bright. you can bearly see the icon/words to allow you to select your options. have restarted and reset without a difference. instead of a black background, it is all white.
    and repair info or work arounds would be appreciated. everything else works fine.

    Hi @rons8600 
    Thank you for getting back to me. I am going to send you a private message, please check the little envelope on the top right hand corner of the forums page to check your Forums inbox.
    Feel free to review the HP Privacy Statement.
    This Privacy Statement informs you of our privacy practices and of the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is readily available on our HP.com home page and at the bottom of every HP web page.
    There are an increasing number of posts in this forum and elsewhere in the internet with the steps to do a resets on different printers.  The reset itself will sometimes fix problems, so the reset is not the issue. 
    Some resets require you to enter button combinations to open special menus on your printer that you were never meant to access.  These special menus are used by the developers and support personnel for debugging issues, but they are not meant for untrained users and can have unintended results.  One wrong button push and you no could no longer have a printer, but instead a pricey paper weight.  To top it off, if you do happen to "brick" the printer this way, it is considered customer induced damage, and voids the warranty automatically. These resets are only meant to be given out and used as a last resort, and under direct instruction of a HP tech support representative. They should not be done lightly!
    Printer Resets: What You Should Know
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Please Help: iMac black screens after startup logo + spinning wheel no cursor).

    Hi, guys.
    I'm in a fair bit of a desperate situation; my iMac's screen seems to shut down every time after the white startup screen. The Apple logo appears, & the progress wheel begins spinning, then after a while - when it would usually then go to the gray login screen - it would, instead, go black. I can tell that the machine is still on (I can still hear it clicking as it does during processing) but I'm unable to determine anything else. Nothing is visible on the screen - not even the cursor - it's as if the display had turned off completely. I'm not sure if the login screen sits beneath that black screen (I have tried to log on by typing my login details in blindly, but even if it does log in, it's hard to determine what state the computer is in without seeing the screen.
    I have tried the PRAM reset (holding CMD+OPT+P+R) during both the white startup screen, & the black screen to no avail. It seems unresponsive because I don't hear any additional chimes that I've been told should be heard during a PRAM reset attempt. I can't even be sure that the command is being inputted correctly because the light on my wireless keyboard remains off during the process.
    I've tried rebooting over & over again; the results are the same.
    The steps that led to the problem occurred thusly:
    1 - I was trying to clear some memory from my current session, so I scanned through my active processes, quitting anything which seemed to be eating up considerable amounts of memory.
    2 - One particular process I quit was 'launchd' which was functioning under my profile username.
    3 - After quitting launchd, all opened apps seemed to close, & it looked like I was forcibly logged off the machine. The screen froze during this point, & I decided to do a hard reboot to log back in.
    4 - The problem began after this hard reboot; startup seemed to occur as per usual; white screen > apple logo > progress wheel > and then suddenly, a black screen where the login screen should be.
    I've shown a flashlight into the screen while it's black & it seems well & truly like the display has shut down while the iMac continues in the background. I have had issues relating to my screen going black before, but they were random & intermittent; they didn't occur without fail during the exact same time immediately after startup, & could be remedied by using the CTRL+OPT+EJT keys.
    I am on an iMac 2010, 27", using I believe Lion OSX. I am unable to recall additional specifications while the problem persists.
    Could anybody please help me? I'm quite desperate; I was in the middle of some urgent work that I need to get back to as soon as possible.
    Thank you I'm advance to anyone with advice on how I can go about fixing this.
    ,c.

    Gray screen appears during startup

  • Please help a mother that has no idea how to fix a ipod

    i need help in fixing my daughters ipod she cant remember her passcode and she has tryed to many times and it has now disabled her ipod i have no clue in how to fix this it says to connect to itunes i did that and still nothing please help me in this matter she is going a little bit crazy her and so am i thank you for helping me in this problem the faster the better

    You do not have to restore to factory settings/new iPod. Restoring from backup does not restore the screen-lock passcode.
    Also the article you provided a link troi does not apply to the iPod touch. The article says:
    Products Affected
    iPod, iPod classic, iPod classic 160GB (Late 2009), iPod mini, iPod nano
    Thomas A Reed wrote:
    For security reasons, the only thing you can do if the passcode has been forgotten is to restore the iPod to factory defaults.
    http://support.apple.com/kb/HT1339

  • Please help! My screen is frozen! Any advice?

    Okay, so earlier this week my iPhone 5c froze when I was on safari. I could put the phone to sleep but whenever I turned it on, it would still show the safari page; on the lock screen, on the home screen, and even the apps and accessories. After about twenty minutes, I shut the phone off and took out the SIM card. When I turned the phone on, it worked! This morning my phone was acting funny, so I decided to reset the settings; a usual thing for me becuase my iPod used to need it around three times a week. After waiting and waiting I got tired and left the room for a bit. When I got back my phone was still on the reset screen (you know, the one with the apple sign and the white loading bar underneath) and showed it was fully reset. So I waited a bit then became annoyed and attempted to shut the screen off. It worked. That's how I figured out the screen was frozen. So I tried to do what I did the first time my phone froze. IT didn't work and I can't even shut the phone off. Just put it into sleep. Its been over fifteen hours since it has frozen, and it is still frozen. This phone is brand new. It was a gift for Chirstmas of 2013. Please help! I'd appriciate it so much! I rather not have to reset my phone to the point where I have to get all my contacts back and such, but if that's the only way, I will. Please!

    A reboot by holding both the power and home buttons until the apple logo appears should clear minor problems.  If that does not help, take the iPhone to an Apple store genius bar and have the technicians check it to see if something is wrong in it. 

  • Please Help!  Photo Import has Suddenly Slowed to a Crawl -- 19 hours

    I have transferred 1,000s of RAW photo files to my HD and external HD with no problem, until a few days ago. Suddenly, what used to take about 3 hours now takes 19-24 hours. I can't figure it out.
    I've changed card readers, I've tried different memory cards, I've even downloaded to external HDs and tried to upload directly to my HD. I've also hooked up my camera and tried to transfer the files via a USB cable (traditionally the slowest way). I've also tried to upload using different software programs: Lightroom, iPhoto and Bridge.
    I've also ran the Disk Utility on my HD and there weren't any problems.
    Nothing works.
    Please help.

    If ran Disk Utility and only used +Repair Disk Permissions+, you may want to startup from another disk and run +Repair Disk+ (to look for and repair disk directory errors). If you don't have another bootable disk, you can startup from the Mac OS X (current version) installation disk. Insert disk and startup with the C key held down to start from the optical drive. When you get to the first Installer screen (after language selection), go up to the Utilities menu and select Disk Utility, then run +Repair Disk+ on your normal startup drive.
    Also, do you have sufficient free space on your hard drive? While you were move those 1000s of photo file around, did your startup drive ever get to less than 10GB free?

  • PLEASE HELP! My screen is broken and I need to sync!

    My screen broke, everything else is working fine, and I want to sync the broken phone with the computer one last time. I need the phone numbers. I have a Palm 755P from Verizon.
    I have the plug that is the USB end connected to my computer, and the prong thing that attaches to the bottom of the device with a "sync bottom" on it. My touch screen is broken and is many shades of vibrant color
    Is there a way to perform sync or navigate through menus without using the screen? Please help!

    I am connected to a Mac with OS 10.4. Thank  you!

  • PLEASE HELP! itunes v11 has encountered a problem and needs to close

    I've just got an iPhone 5s so updated my iTunes to version 11 now every time I try to open I get A "itunes has encountered a problem and needs to close" message!! PLEASE HELP! I have an xp and have tried reinstalling a million times! Alsoy wick time is still working though if that helps!

    edit...

  • Please Help. Ipod Screen Not Working

    My screen on my ipod does not work any more.
    I have tried restoring/updating it.....everything!!
    problem is this is my second due to a faulty battery on the first which apple exchanged free of charge for me so I ma not sure if I am entitled to another ipod or what!!!
    If anyone knows how to get the screen working or about 2nd exchanges then please help,
    Thanks,
    Louise x

    If you truly have tried resetting/restoring, then it's time for service. Is it still under warranty, because if so, it won't matter that you have had one exchange already?

  • Please help! Blue screen, no issues

    Hi all!
    I have a really big problem. When I start my computer, there is the white screen with the apple,then I have to write my password. That's normal. Ok. After writting my password, the computer goes slower than normaly, to put me in front of a really beautiful BLUE SCREEN, you know, the blue screen you have at the begining, when you start your computer for the first time. Well. I used that: "http://docs.info.apple.com/article.html?artnum=106464#symp1", the first chapter, about the blue screen. First of all, I don't know why there is the 3 first steps cause I have only my blue screen, and I can't restart whit mac os 9: I can't do any of this actions. So, the steps after, I can't use it cause when I use the "sbin/mount -uw/" command, the commands after like "mv /var/db/SystemConfiguration/preferences.xml preferences.old" or "chmod 1775 /", it's writting: "illegal option -- /"...
    So, I can't do any of the steps in this topics and my fsck says me that my computer seems to be ok.
    Please help me, I don't know what to do.
    Thank you very much for help.

    I see. so, I tried: "/sbin/mount -uw/" . Then, it wrote: "HFS: Removed 1orphaned unliked files".
    After, I wrote: "mv /Library/Preferences/com.apple.loginwindow.plist preferences2.old" . And it sayed me that: "mv /Library/Preferences/com.apple.loginwindow.plist preferences2.old: No such file or directory" . Have I to put something before?
    I did the same with: "/sbin/mount -uw/mv /Library/Preferences/com.apple.loginwindow.plist preferences2.old" and it sayed me:
    "mount: illegal option -- /
    usage: mount [-dfruvw] [-o options] ..." and a lot of other [...] thing.
    I tried the same with :"/sbin/mount -uw/chmod 1775 /" and it did the same (illegal option...). Is there some error when I wrote the command?
    When it says that in the topics:
    "Type: mount -uw /
    Press Return.
    Type: chmod 1775 /
    Press Return.
    Type: reboot
    Press Return"
    What have I to write exactly ? Just "mount -uw /" and then enter and then "chmod 1775 /"? Because when I do that, nothing happens. Just an other "localhost:/ root#" is write. Same for:
    "Type: mount -uw /
    Press Return.
    Type:
    mv /Library/Preferences/com.apple.loginwindow.plist preferences2.old
    Tip: There is a space between ".plist" and "preferences".
    Press Return.
    Type:
    mv /Library/Preferences/com.apple.windowserver.plist preferences3.old
    Press Return.
    Type: reboot
    Press Return."
    What have I to right exactly before or/and after this commands?
    Thanks a lot for help

Maybe you are looking for

  • IPod Touch Remote doesn't connect after 8.1 upgrade

    After upgrade to iTunes 8.1 with iTunes DJ my ipod Touch Remote app wont work as before. I get a connection that makes it possible for me to vote and wish songs in iTunes DJ, but I don't have the possibility to change volume, stop, play, skip as befo

  • Imac will not reboot in safe mode

    Attempted to restart imac (10.8.4) by holding down shift key, went through progress bar, and now still apple logo with pinwheel - any suggestions? I have unplugged the externals with time machine and the other external.

  • The sound on my computer freezes/sk​ips

    The sound on my computer freezes/skips when I watch/listen to anything. I have an HP Pavilion g7 Notebook with 4g and AMD Athlon II P360 Dual-Core Processor.  The bios is F.04 - from 3/29/11.  Any help would be greatly appreciate. HP Techs were not k

  • Oracle virtual directory

    i have two different directory AD1 and AD2 .i want to combine these both directories in OVD .so pls tell me the procedure how to do that???

  • Using FDK without webservice overhead?

    Hi, We have to migrate our Oracle iFS based CMS to Oracle ContentDB. For this, we want to use the FDK Java API, but without using the webservices interface. I believe this means we have to start the Content DB low-level services also in the Java VM (