Please help me, my Sharp LCD TV went black.

I just bought a new Mac Mini and set it up straight HDMI to HDMI on the Sharp Aquos 37" LCD TV I had it working fine until I mistakenly tried to change the resolution. The TV went black and won't come back unless I start the Mac Mini in safe mode. I need to know how to reset back to the original settings before I get desperate and try reinstalling the OS.

Found a post by B Steely and it worked. The planets are once more in alignment. Thank you so much!

Similar Messages

Please help!! The sound just went silent!!

Sunday afternoon I unplugged my headset to go and playing drums in our garage. When I came back and plugged my headset again but the sound didn't work!! The computer had been on the whole time and no one had touched it and I listened to mp3 before went out. First I thought that I had plugged it in the wrong hole or that the volym had been set down but it hadn't. I have tried almost everything, reinstalled the drivers, flashed the bios (of course I have checked if the audio is enabled in the bios), I have even reinstalled windows!!. I hope anyone can help me I'm really confused!!
I'm sorry about my bad English.
My computer:
MSI K7N2-Delta-ILSR nForce2
AMD Athlon XP2500+ Barton
TwinMOS Original 256Mb 333MHz CAS2
Maxtor DiamondMax Plus9 120Gb
Abit GeForce FX5600Ultra OTES 128Mb DDR
Windows XP Pro (SP1)

Quote
Originally posted by twistedbrowntucker
Is the headset working? Any other listening device you can plug in like speakers to verify that the audio is not working?
Quote
Originally posted by sharmane
Yes. Check the headset with another device or try a speaker on the PC. Make sure that you plug the headset to the green colour port on the sound card. I have seen people accidently pluging the headset into the modem .
Yes, I have tested another speakers, I have also tested the headset in our TV and it's working fine.
For the first I dont have a modem, for the second the first thing I checked was if I had plugged in it in the right port.

PLEASE HELP TO CHANGE SCREEN OF Q10 FROM BLACK TO WHITE??

DOES ANYBODY KNOW IF YOU CAN CHANGE THE SCREEN FRON BLACK TO WHITE??.....

Nope, the Q10 has a black theme and that's what it has.
That could change at some point but I sort of doubt it.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

PLEASE HELP! x200 Bios Update caused Laptop Black screena and beeps

Hi All,
I updated my bios using the lenovo auto updater thing. Now my laptop starts with a black screen and 3 beeps. 1 long beep and 2 short ones. Please can anyone help me. What do i need to do. I have no warranty.
Thanks
Kooms

If you stop breaking the rules, we'll stop removing your messages from public view.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Please help me choose an internal drive for black macbook

hi
i own a black macbook.
my current drive is FUJITSU MHY2250BH which came with the macbook.
I need a biggeer drive, the biggest possible, and I would like 7200rpm as i do alot of audio intensive work etc.
i found a 500gb fujitsu, but the dimensions are slightly diff to my current drive.
should i make sure the dimensions are exactly the same? eg to the millimetre??
i just want to know about what specs to watch out for.
i live in uk, so dont really want to buy from a usa retailer.
can anyone help?
thankyou
also, would i be able to use my current drive as an external drive? how could i plug it into macbook? an enclousre? or just a wire?
i also have a bootcamp partition currently.
would the new drive be a simple change over? ie. no need to reinstall any app or boot camp from scratch again? i think i read that we can just use a time machine back up to put my current macbook drive state onto the new drive.....right?

As of October 1, 2009 Toshiba is now handling Fujitsu Branded Drive support.
Check what they've got available in the way of notebook/laptop internal hard drives. I'm sure their 500GB 7200rpm internal HD will fit
SATA 3.0Gb/s (SATA-2)
Form Factor 2.5"
minimum cache of 8MB
http://sdd.toshiba.com/main.aspx?Path=StorageSolutions/PCNotebookHardDrives/MKxx 56GSYSeries
look at the MK5056GSY - obtained from a quick Google: http://www.itpro.co.uk/615283/toshiba-expands-2-5in-hdd-range-for-high-end-lapto ps
Message was edited by: myhighway

PLEASE HELP - Nokia x6 - Turns on but only black s...

Last night I put my phone on charge and it was working fine, when I woke this morning the white light was flashing, so I unlocked my phone, yet nothing came up on the screen.... So I took my battery out and put it back in, turned it back on and only the green, white and red light comes on, there's no nokia logo or any sort of life in the screen. I tried charging it, plugging in the USB, still no avail. ANY HELP????????

Looks like you have no option but to hard reset.
To hard reset, press and hold the green call button + red end call button and the camera capture button, then turn on the phone using the power button while holdling the other buttons until you see the Nokia handshake.
Nota that you will lose all your data in your phone unless you already have a backup of your phone.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Can't access iTunes Store. 'One Moment Please' message. Please help!

I downloaded the latest version (9.0.3) of iTunes at the start of this week when I bought my iPhone. Everything worked fine & I could access the iTunes store & purchased music. I had purchased music on my iPod which I transferred to my iTunes library & everything was still working fine.
Then a couple of days later I created a ringtone from a purchased song. I synced my iPhone & the ringtone works absolutely fine, however, I can no longer access the iTunes Store. The following message is displayed:
"One Moment Please, Connecting to the iTunes Store, Loading... If iTunes doesn't open , click the application in your Dock or Windows Task Bar."
I have also tried to sign in to my account however I am unable to & receive the following message:
“We could not complete your iTunes Store request. An unknown error occurred (-50). There was an error with the iTunes Store. Please try again later.”
I use a wireless connection at home & iTunes is working absolutely fine on my other computer.
The Radio works fine, I am definitely connected to the Internet as I am accessing other sites at the same time as trying to open the store.
I have not switched to a new ISP & absolutely none of my Internet/firewall/security settings have changed in any way.
I have tried all of the following but none have fixed the problem:
I have configured Windows Firewall to allow iTunes to access the iTunes Store.
I have run Diagnostics which indicates that there is absolutely nothing wrong.
I have removed & re-installed iTunes on my laptop.
I have temporarily disabled my security software and firewalls.
I have using the MSCONFIG utility on my laptop to try & identify if a software program is preventing me from accessing the store but I still cannot access the store.
I am at a loss, I have no idea what to do next…please help, thanks!

Hi I just went through several days of the same problem, I was told to uninstall all of the Apple related software and reinstall in the order on this link
http://support.apple.com/kb/HT1923?viewlocale=en_US
than follow these steps
iTunes Store, iTunes, Windows 7, Windows Vista, Windows XP, Microsoft Windows XP SP2 and Vista
Remove pop-up blockers
Some pop-up or ad-blocking programs may interfere with the ability of iTunes to connect to the iTunes Store. Removing them in many cases will resolve the issue.
Flush DNS Setting in Windows
In some cases, the DNS information you computer uses to connect to the Internet needs to be reset. Follow these instructions to flush your Windows DNS information:
Windows XP
1.On the Start menu, click Run.
2.In the Open field type cmd and click OK.
3.In the resulting window, type ipconfig /flushdns and press Return on the keyboard.
4.You should see a message that the DNS Resolver Cache has been successfully flushed.
Windows Vista and Windows 7
1.On the Start menu, point to All Programs > Accessories and then right-click Command Prompt and choose Run as Administrator from the shortcut menu. If Windows needs your permission to continue, click Continue.
2.In the resulting window, type ipconfig /flushdns and press Return on the keyboard.
3.You should see a message that the DNS Resolver Cache has been successfully flushed.
Note: If, in the command prompt, you see this message: "The requested operation requires elevation", close the command prompt and repeat steps 1 and 2 above to be sure that Administrator privileges are used to access to Command Prompt.
For additional troubleshooting information about connecting to the iTunes Store, see Can't connect to the iTunes Store
after all this I had to go to control panel and create a new user with administrator controls, log off and on to the new users account. In the new account itunes store finally works, I'm not sure if all of the steps I was first instructed to take were needed, but I was happy to be able to finally access the itune store again. I hope this helps someone else.
Good Luck

Please Help, Genius Maxfire gamepad won't work in Mac os Yosemite in MacPro.

I have a Genius Maxfire 3 gamepad and this work fine in Mavericks in a new MacPro, after update to Yosemite this don't work, please if someone have a solutions, please help.
Thanks, Juan.

Have you went to Genius Maxfire 3 gamepad's support site/contacted them?

I have creat new apple id when i sign in 1st time this will say this apple id has not yet been used in itunes store? please help

i have creat new apple id when i sign in 1st time this will say this apple id has not yet been used in itunes store? please help

I changed my dads password, then went back to sync my apps and when it came to the Authorization, I entered his account name and the new password (which was by the way accepted and changed correctly) to have it come up on the screen as the incorrect password...REALLY!!! I went back and changed the password again...guess what? Same result "inncorect password".
As I mentioned my dad PASSED AWAY, there is no way I can ask him what his password originally was, i can't accesses his email account as it no longer exists.
What am I supposed to do, this is very frustrating.
If I use my new account that's in my name, the Authorization screen just keeps asking for my Dads account.

Color Code is not working, please help

I am using the color code 080808 from adobe photoshop as my background for my template. When i put the JPG file into dreamweaver and try to set the page properties in dreamweaver (background) to 080808 it is putting me at pure black. please help me.080808 is not a pure black its a shade of it. I need a color code that matches 080808 correctly. thanks
I am using adobe CS3

I'm not quite sure I understand exactly what you are doing, but I ran into something like this myself. I was creating GIFs in Photoshop -- type on a background color. I then created DW pages. I used the same color code for the background color in PS and again for the background color in DW, but when I inserted the images in the page, they did not match. It turned out that when I created a new file in PS, I was creating it in my default color space, Adobe RGB. I assumed that when Save For Web converted the file to sRGB, the colors would convert perfectly. What I found is that I should have been creating my PS files by starting with a new file in sRGB color space. Once I did that, the background color of my images identically matched the background color of my DW page.
Hope this helps.
John

Nokia 5530 Xpress lcd replace went wrong - help! p...

I disassemblyed my phone. After replacement the touchscreen won't lit. Why? Leds and sound is working but when I when I placed the nearly fault original LCD, nothing happened. Screen went black.
I need some quick help, please!

you wont get any help here im afraid to say discussing this kind of activity is not allowed plus you have voided your warranty
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

How to install windows 7 on my macbook pro mid 2009 using usb. right now aim using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me

how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
Iam new to coding. please help me.

try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0

TS1389 im trying to sync my ipod and everything went well but when i tried to get all my songs back off my laptop it wont let me it tells me to authorize my computer but then it doesnt give me that option im in despret need of help someone please help.

okay so my cousin downloaded a bunch of songs to my ipod and i couldnt listen to them so i decided to sync my ipod, i thought everything went well but i guess i was wrong because i saved all my apps to my laptop and my music also. but now i cant get any of it back on my ipod it says i have to authorize my computer so when i go to itunes and attempt to authorize my laptop it doesnt give me that option ive tried everything someone please help thanks...

Open itunes, Click the word Store at the top of your computer screen
On a windows computer, if it does not show, then click Alt-S

I am using an iphone 3g and when i connect my device to my laptop a dialog box appears saying that an update of 4.2 is available so went for it.after the firmware is downloaded via itunes it shows that the firmware is invalid!.please help.

HEY GUYS I AM USING AN IPHONE 3g and when i connect my device to my laptop a dialog box appears saying that an update of 4.2 is available so went for it.after the firmware is downloaded via itunes it shows that the firmware is invalid!.please help.
AND ALSO I HAVE HEARD THAT THE IPHONE 3G CANNOT BE UPDATED TO IOS 4.2!IS IT TRUE???
PLEASE HELP ME.

This means that the phone you have was software unlocked to use on any carrier, or hacked. When you installed the update it restored the lock that originaly came with your phone. Not much you can do now. Apple will not support hacked phones. You will need to find out the carrier your phone is locked to and see if they offer official unlocking, or start googling to see if you can find a way to unlock 4.2.

My LCD screen burned out. I have it connected to a tv now, but can't get the menu bar or the function bars to show up. Please help!

My LCD Screen burned out, but the computer still works. I currently have it connected to an HDTV via, Mini DVI to VGA, VGA to VGA on the tv. Problem is, I can't get the function bar (maybe not the right term) or the bar at the bottom with all my programs on it. I get my screen saver and have managed to drag (by sheer luck since I can't see anything on my iMac screen) some of my pics I had on my desktop over, but nothing else. Please help!

Hello
you should have on your key board "mirroring key" , or F7 on old keyboard
for now your tv is an extended screen for your imac not a miror , so you can not see menue barre on top of screen
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8525.html
HOPE you are in 10.6
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8525.html
"On some keyboards, you can press the F7 key, or Command-F1, as a shortcut to turn video mirroring on or off."
HTH
Pierre

Please help me, my Sharp LCD TV went black.

Similar Messages

Maybe you are looking for