Please help me on the below issue.

Hello All,
We are using ERP integrator to pull data from Oracle EBS 11i and to load to HFM EPMA application. There is one specific account is there when i go and check in EBS data base in APPS.GL_CODE_COMBINATIONS table coloumn Account_type the account type its showing its as Expense. But when its import into ERP integrator in ERP integrator for some records its showing it as revenue and for some records its showing it as expense. Please help me when it shows the data  in ERP integrator work space page from which table it connects to show the data in ERP integrator workspace page. The account which is creating problem previously it was Expense account type in EBS now the account type has change to Revenue.
Thanks in Advance.
Regards,
Sree

Have you attempted to backup and then clear the AIF_EBS_GL_CCID_STG table and then re-ran your data load rule with the "Full Refresh" option?
If not, you will want to do this and then check the account type in the table after the data load rule run.
Refer to the following KM Document for information on clearing the table:
ERPI Code Combinations are Out of Sync With EBS (Doc ID 1473119.1)

Similar Messages

  • Please help me on the below error code.

    Hi All,
    Good evening. Can any one help me on the below error
    What is the route cause for that n what is the solution?
    ORA-27101: shared memory realm does not exist. "
    Regards,
    GR

    What is the route cause for that "Error ORA-27101 is reporting that the shared memory key generated by the client does not match any currently existing keys. This is to be expected if the ORACLE_HOME or ORACLE_SID used by the client is not the same as that used when starting up the database."
    n what is the solution?That depends on the type of your connection.
    You should probably check your listener.ora and make sure your ORACLE_HOME is set properly.
    See Metalink Doc Id 122183.1

  • Database get hang  please help to resolved the issue.

    Hi,
    we are getting below error at that time db not allowed user to connect database.please help to resolved the issue.
    db version is 10.2.0.3
    Errors in file /oracle/oradata/bdump/pmspr_j002_1593486.trc:
    ORA-12012: error on auto execute of job 42597
    ORA-27468: "EXFSYS.RLM$SCHDNEGACTION" is locked by another process
    Tue Jan 3 10:21:55 2012
    Errors in file /oracle/oradata/bdump/pmspr_j003_1347686.trc:
    ORA-12012: error on auto execute of job 42596
    ORA-27468: "EXFSYS.RLM$EVTCLEANUP" is locked by another process
    Tue Jan 3 10:21:55 2012
    Errors in file /oracle/oradata/bdump/pmspr_j004_1995004.trc:
    ORA-12012: error on auto execute of job 42596
    ORA-27468: "EXFSYS.RLM$EVTCLEANUP" is locked by another process
    Tue Jan 3 10:21:55 2012
    Process OS id : 2064550 alive after kill
    Errors in file /oracle/oradata/udump/pmspr_ora_1572972.trc
    Tue Jan 3 10:21:55 2012
    Errors in file /oracle/oradata/bdump/pmspr_j005_1617988.trc:
    ORA-12012: error on auto execute of job 42597
    ORA-27468: "EXFSYS.RLM$SCHDNEGACTION" is locked by another process
    Tue Jan 3 10:21:55 2012
    Errors in file /oracle/oradata/bdump/pmspr_j007_1523820.trc:
    ORA-12012: error on auto execute of job 42596
    ORA-27468: "EXFSYS.RLM$EVTCLEANUP" is locked by another process
    Tue Jan 3 10:21:55 2012
    Errors in file /oracle/oradata/bdump/pmspr_j009_1933354.trc:
    ORA-12012: error on auto execute of job 42596
    ORA-27468: "EXFSYS.RLM$EVTCLEANUP" is locked by another process
    Tue Jan 3 10:21:55 2012
    Errors in file /oracle/oradata/bdump/pmspr_j006_1536044.trc:
    ORA-12012: error on auto execute of job 42597
    ORA-27468: "EXFSYS.RLM$SCHDNEGACTION" is locked by another process
    Thanks

    I think the following Oracle two note looks interesting:
    Note: 330725.1 Scheduler Job has Been Locked For Days Ora-27468
    Note: 731678.1 Scheduled jobs do not run as expected after 10.2 upgrades
    HTH -- Mark D Powell --

  • TS1363 My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue?

    My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.

    uninstall all iTunes,5 programes,this worked for me after reinstall them

  • HT203196 My macbook air 13inch got shutdown 3 times by itself. I tried installing SMC package as suggested but my computer is telling the update is not required. Could you please help me on fixing this issue. Thanks.

    My macbook air 13inch got shutdown 3 times by itself. I tried installing SMC package as suggested but my computer is telling the update is not required. Could you please help me on fixing this issue. Thanks.

    What version of OS X are you using? Exactly which MBA model do you have?

  • My ipad air getting close all apps automatically within seconds while connecting wifi. This issue is started after the updation of the iSO 8, Please help me to rectify this issue.

    Hi,
    My ipad air getting close all apps automatically within seconds while connecting wifi. This issue is started after the updation of the iSO 8, Please help me to rectify this issue.
    Expecting some quick solution in this regard,
    Thanks
    Prabhu

    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

  • Can you please help me how resolved this issue.

    Hi Experts
    I am trying to connect LDAP by R/3 system. R/3 system connected to LDAP but when I am trying to find and pull the fileds in the "Find in the Directolry" option I am getting below error.
    LDAPRC 010 another server is referenced.
    Can you please help me how resolved this issue.
    With Regards,
    Trinadh Bokka

    You may be able to solve by using
    Note 1151329 - Depth of LDAP search is only one level below the base entry
    Markus

  • Please help me with the error ASAP

    I am trying to write an ABAP statement for the below requirement.
    Function has two import parameters. 1. key and 2. date.
                                Export parameter: export_rec like TAB.
    Req:  I need to select a record from a table where key = input parameter and input date lies between the from and to date fields in the table. (since table is time dependent).
    EXPORT_REC like TAB,
    I_T_TAB like TAB OCCURS 0 WITH HEADER LINE.
    SELECT  SINGLE * FROM I_T_TAB INTO EXPORT_REC WHERE KEY = IMPORT_ PARAMETER AND IMPORT_PARAM_DATE BETWEEN FROM_DATE AND TO_DATE.
    But, I am getting errors. It says the I_T_TAB is not defined in the Abap dictionary as table, view or projection.
    I defined it as an internal table. But, even then I am getting this error.
    Can anyone please help me out with this issue,
    Thanks,
    Regards,
    aarthi
    [email protected]

    Hi aarthi,
    SELECT can be used to fetch data only from database tables/views. in your case you used SELECT from an INTERNAL table,which is not allowed.
    SELECT  *
           FROM <DBTABLE NAME>
           INTO TABLE EXPORT_REC
           WHERE KEY = IMPORT_ PARAMETER AND   
           IMPORT_PARAM_DATE BETWEEN FROM_DATE AND TO_DATE.
    HERE Instead of <DBTABLE NAME>,you have to give your Database table,which stores these values.
    then your data will comes into EXPORT_REC.
    and remember to give EXPORT_REC in TABLES parameters of that FUNCTION MODULE and give associated Type for that.
    Regards
    Srikanth

  • Please help me with the installation process.

    i have got free norton antivirus activation keybwith the pirchase of hp 16 gb pendrive .
    please help me with the installation process.

    Hey @10p,
    Welcome to the HP Support Forums!
    I understand that you need assistance with the installation of Norton Antivirus that you received with the purchase of an HP 16gb Pendrive. Did you get the Pendrive with a computer or just purchase the Pendrive on its own?
    Once I know if the Pendrive came with the purchase of a computer I will be able to point you in the right direction for support. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • I have a scenario. Import IDOC into PI and PI transform IDOC to Excel. Using mail adapter attach that Excel using pi and send to customer. Can you please help me on the same?

    HI Experts,
    I have a scenario. Import IDOC into PI and PI transform IDOC to Excel. Using mail adapter attach that Excel using pi and send to vendor. Can you please help me on the same?
    Thanks
    SaiSreevastav

    Hi Sai,
    you can use XSLT or java mapping or adapter module to convert IDOC xml to XLS. Please refer the below blog
    Convert incoming XML to Excel or Excel XML – Part 1 - XSLT Way
    Convert incoming XML to Excel Sheet Part 2 – Adapter Module way
    Convert incoming XML to Excel Sheet
    then after converting to Excel, you can use the payloadswap bean in mail adapter
    XI: Sender mail adapter - PayloadSwapBean - Step by step
    regards,
    Harish

  • HT3702 please help to solve the violation from itunes

    please help to solve the violation from itunes

    Sorry, but the minimal amount of information you have provided does not allow us to understand what problem you are having. You will need to post a more complete description of your issue before anyone can even guess at suggestions.
    Regards.

  • I'm getting the below issue when I try to deploy a report with Dynamic parameters, when I deploy it with static parameters I'm not getting this issue.

    I’m getting the below issue when I try to deploy a crystal report with Dynamic parameters in BI Launch Pad, when I deploy the same report with static parameters I can deploy and run it. I have Restarted the BI server, still the issue exitno use. kindly help me on this issue.
    “This error occurred: Adding Crystal Report "CrystalReport1.rpt" failed. The server with kind rptappserver returned an error result. Failed to copy the report file to the report object. Refreshing the report object properties might have failed. Failed to read data from report file CrystalReport1. Reason: Failed to read parameter object”.

    BO does not run dynamic params through the report as would happen without BusinessObjects (BO) or Crystal Reports Server (CRS).  When you publish a report with dynamic parameters to BO/CRS, the prompt is published to the repository so that it can be accessed through the Business View Manager (which can be installed as part of the client tools).  In order for this to work a couple of things need to happen:
    1.  You need to be sure that you check the "Update Repository" box on the Save As screen the first time you publish the report.
    2.  Your BO/CRS user needs to have "view" access to the Crystal2013ReportApplicationServer in the Servers section in the CMC - in fact, the Everyone group should be given view access to the server in order for dynamic prompts to work correctly.
    3.  In the Business View Manager, the Administrator user needs to give your user, or, even better, a Crystal Developers group full control access to the "Dynamic Cascading Prompts" folder.
    Best practice for dynamic prompts in a BO/CRS environment is to actually create the prompts in the Business View Manager.  This will allow you to create a single data connection that can be reused and also create lists of values such that the same list or prompt can be reused by multiple reports.  If you just create the prompts in Crystal, you will end up with multiple data connections to the same database, the prompts will use the whole query for the reports to get the dynamic values instead of just a focused query to the lookup table that contains the values, and there ends up being lots of duplication and chaos.
    -Dell

  • I downloaded lion but lost the setup assistant.  please help me recover the setup assistance.  i do not know where/how to find/enter information in the terminal.

    i downloaded lion but lost the setup assistant.  please help me recover the setup assistant.  i do not know where/how to find/enter information in the terminal as was suggested.

    Launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.   Copy or drag -- do not type -- the line below into the Terminal window, then press return:
    sudo rm /var/db/.AppleSetupDone
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. Confirm.
    Reboot. The Setup Assistant will launch.

  • Please help me on URL mapping issue

    Hi,
    I am new to Oracle apps. So please help me to solve this issue. I have created new OC4J instance and changed my URL mapping to /MYApp but when i access application trough browser http://myapp.com/MYApp/../../help I am getting 404 error. If I change the URL http://myapp.com/forms/../../help it works fine. What am i doing wrong?
    Please help me to get raid of this issue.
    Thanks in advance
    Karthik

    Have you attempted to backup and then clear the AIF_EBS_GL_CCID_STG table and then re-ran your data load rule with the "Full Refresh" option?
    If not, you will want to do this and then check the account type in the table after the data load rule run.
    Refer to the following KM Document for information on clearing the table:
    ERPI Code Combinations are Out of Sync With EBS (Doc ID 1473119.1)

  • HT1414 Turn Passcode Off is disabled in my iPod touch 5. Could you please help me for the same ?

    Turn Passcode Off is disabled in my iPod touch 5. Could you please help me for the same ?

    What do yoo mean?

Maybe you are looking for

  • Error while creating report

    Dear Experts, I am getting below error while creating a report. How do i resolve this?....Thanks Bad request. Server message: code: UJO_READ_EXCEPTION_018 severity: error description: MDX statement error: Value 1000000000 /CPMB/A9DG6WN for characteri

  • Can I use the Window XP bundled with MS virtual PC in setting up boot camp?

    Hi hi, before having the new 24" iMac, I have MS office professional for Mac running on my 17" G5 iMac it. The bundle pack contains Window xp professional software running on Virtual pc program. I want to install boot camp on my new intel mac but can

  • Billing text determination to Invoice Form

    Hi, How can we get the texts in the billing document header copied into Invoice Form. Say we have text "xxxxxxx" in the billing document header which came from text determination. We need this text "xxxxxxx" into the Invoice form. Please check and ad

  • Adobe creativ suite 3 web premium problem on vista

    Hi I just got my new computer and have installed the adobe web premium package. The installation was successfull but when I try to run one of the programs it won´t run. Like Dreamweaver, I run it and it appears in the taskmanager as a prosess but not

  • OnSubmit change currentComponentInstance variable

    Hello, I have a BPM object where there are 2 variables of type string with static list values and a variable of type int. My variables are named question1,question2,correctanswers The variables question1,question2 are filled from user input in an int