Please help me on URL mapping issue

Hi,
I am new to Oracle apps. So please help me to solve this issue. I have created new OC4J instance and changed my URL mapping to /MYApp but when i access application trough browser http://myapp.com/MYApp/../../help I am getting 404 error. If I change the URL http://myapp.com/forms/../../help it works fine. What am i doing wrong?
Please help me to get raid of this issue.
Thanks in advance
Karthik

Have you attempted to backup and then clear the AIF_EBS_GL_CCID_STG table and then re-ran your data load rule with the "Full Refresh" option?
If not, you will want to do this and then check the account type in the table after the data load rule run.
Refer to the following KM Document for information on clearing the table:
ERPI Code Combinations are Out of Sync With EBS (Doc ID 1473119.1)

Similar Messages

  • TS1363 My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue?

    My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.

    uninstall all iTunes,5 programes,this worked for me after reinstall them

  • Can you please help me how resolved this issue.

    Hi Experts
    I am trying to connect LDAP by R/3 system. R/3 system connected to LDAP but when I am trying to find and pull the fileds in the "Find in the Directolry" option I am getting below error.
    LDAPRC 010 another server is referenced.
    Can you please help me how resolved this issue.
    With Regards,
    Trinadh Bokka

    You may be able to solve by using
    Note 1151329 - Depth of LDAP search is only one level below the base entry
    Markus

  • HT203196 My macbook air 13inch got shutdown 3 times by itself. I tried installing SMC package as suggested but my computer is telling the update is not required. Could you please help me on fixing this issue. Thanks.

    My macbook air 13inch got shutdown 3 times by itself. I tried installing SMC package as suggested but my computer is telling the update is not required. Could you please help me on fixing this issue. Thanks.

    What version of OS X are you using? Exactly which MBA model do you have?

  • My iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist, my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist

    my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist, my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist ,please help me

    uninstall all iTunes,5 programes,this worked for me after reinstall them

  • My ipad air getting close all apps automatically within seconds while connecting wifi. This issue is started after the updation of the iSO 8, Please help me to rectify this issue.

    Hi,
    My ipad air getting close all apps automatically within seconds while connecting wifi. This issue is started after the updation of the iSO 8, Please help me to rectify this issue.
    Expecting some quick solution in this regard,
    Thanks
    Prabhu

    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

  • HT4623 After I update IOS6 for my iphone 3gs, while i turn on vibrate (Using side button) is not supporting. Automaticlaly tur.n on ring mode. So please help me to resolve this issue.

    After I update IOS6 for my iphone 3gs, while i turn on vibrate (Using side button) is not supporting. Automaticlaly turn on back to ringing mode. So please help me to resolve this issue.

    No one facing this issue in 3GS? please help me.

  • Please help me to solve the issue in my query.

    Hi All,
    Please help me to understand the mistake what i did in below query and help to resolve that.
    Actually i am trying to create a query to filter the records from db based on my input parameter.
       If my input parameter is 1(@showallrecords) then i need to show all the records which has the IsLatest as 1
       If my input parameter is 0(@showallrecords) then i need to show all the records which has the IsLatest as 0
    select * from tabel1 INNER JOIN tabel2    
    ON tabel1.KeyId = tabel2.KeyId 
    and (@showallrecords = 1 and tabel1.IsLatest = 1 )
    and (@showallrecords = 0 and tabel1.IsLatest = 0 )
    when i am executing the above query with the parameter @showallrecords = 1 ,db is returning 0 rows.If i am executing the above query after removed the last line and (@showallrecords = 0 and tabel1.IsLatest = 0 ) then records are coming.
    i understand that 1=0(last line) and the condition is not true.So its affecting the result.
    Please help me to solve this.

    select * from tabel1 INNER JOIN tabel2
    ON tabel1.KeyId = tabel2.KeyId
    WHERE (tabel1.IsLatest = @showallrecords Or @showallrecords=0)

  • Why is my iPod Touch's memory 0 when i only have 249 mb of photos and camera and 23l mb of Music? Please help this is a big issue! what do i do? ps i dont want to loose 2 of my apps!!

    I have a 8GB Ipod Touch and i know its not a lot, but in the beginning it was working fine. For some time now it wont let me excede even 1GB of memory. i have no games, no apps, not many contacts, hardly anything! only 249 mb of photos and camera and 23l mb of Music. i have backed it up and restarted it and everything and i am getting annoyed! please help me!! i cant live without my ipod!!! This is urgent!
    P.S: i have 2 apps on my ipod that i would not like to loose! IF theres anyway to save them in the process of fixing my ipod that will be great!
    Thank you!

    An "other" that large usually indicates that the "other" includes corrupted files.  Usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
    To restore from backup see:
    iOS: How to back up
    To restore to factory settings/new iPod see:
    iTunes: Backing up, updating, and restoring iOS software

  • Please help, iPod Nano and iTunes issues

    1. I can't update my iPod Product Red. I've downloaded the update, and when I click "update" in iTunes, it just sits there for hours saying its updating
    2. The first time I start windows, connect my iPod Nano and then start iTunes (or even the other way around, start itunes then connect ipod), my nano doesn't show up in itunes. I need to restart the service after plugging in the nano every single time!
    3. I cant restore my iPod Nano either, the same problem with the updating my ipod, the progress screen just goes back and forth for hours without doing anything, infact my nano just seems like it looses synch during both an update and a restore, because the do not disconnect message on the screen goes away once either update or restore process is started.
    Please help! This is my first ipod purchase and so far it is really disappointing me and frustrating, thanks
    -Alex

    1. I can't update my iPod Product Red. I've downloaded the update, and when I click "update" in iTunes, it just sits there for hours saying its updating
    2. The first time I start windows, connect my iPod Nano and then start iTunes (or even the other way around, start itunes then connect ipod), my nano doesn't show up in itunes. I need to restart the service after plugging in the nano every single time!
    3. I cant restore my iPod Nano either, the same problem with the updating my ipod, the progress screen just goes back and forth for hours without doing anything, infact my nano just seems like it looses synch during both an update and a restore, because the do not disconnect message on the screen goes away once either update or restore process is started.
    with that particular set of symptoms, first check on the possibility described in the following document:
    iTunes for Windows: iTunes 7 doesn't recognize iPod

  • HT1338 My macBook pro i5 2.5 dual core screen in blinking, please help me out in this issue. I am using mac os x 10.8.2

    I have bought new macbook pro 13.3" i5 2.5 dual core. I was working fine but suddenly when i restarted my macbook after a shutdown its screen started blinking or scattering type. But before shutdown it was working very fine, dont know what happened to it. Please help me out.

    Try running the Apple Hardware test to see if it picks anything up:
    http://support.apple.com/kb/PH11342
    You can also try starting in the safe mode to see if the condition is the same. Booting in this mode takes a long time to start:
    http://support.apple.com/kb/HT1455

  • Please help! Blue screen, no issues

    Hi all!
    I have a really big problem. When I start my computer, there is the white screen with the apple,then I have to write my password. That's normal. Ok. After writting my password, the computer goes slower than normaly, to put me in front of a really beautiful BLUE SCREEN, you know, the blue screen you have at the begining, when you start your computer for the first time. Well. I used that: "http://docs.info.apple.com/article.html?artnum=106464#symp1", the first chapter, about the blue screen. First of all, I don't know why there is the 3 first steps cause I have only my blue screen, and I can't restart whit mac os 9: I can't do any of this actions. So, the steps after, I can't use it cause when I use the "sbin/mount -uw/" command, the commands after like "mv /var/db/SystemConfiguration/preferences.xml preferences.old" or "chmod 1775 /", it's writting: "illegal option -- /"...
    So, I can't do any of the steps in this topics and my fsck says me that my computer seems to be ok.
    Please help me, I don't know what to do.
    Thank you very much for help.

    I see. so, I tried: "/sbin/mount -uw/" . Then, it wrote: "HFS: Removed 1orphaned unliked files".
    After, I wrote: "mv /Library/Preferences/com.apple.loginwindow.plist preferences2.old" . And it sayed me that: "mv /Library/Preferences/com.apple.loginwindow.plist preferences2.old: No such file or directory" . Have I to put something before?
    I did the same with: "/sbin/mount -uw/mv /Library/Preferences/com.apple.loginwindow.plist preferences2.old" and it sayed me:
    "mount: illegal option -- /
    usage: mount [-dfruvw] [-o options] ..." and a lot of other [...] thing.
    I tried the same with :"/sbin/mount -uw/chmod 1775 /" and it did the same (illegal option...). Is there some error when I wrote the command?
    When it says that in the topics:
    "Type: mount -uw /
    Press Return.
    Type: chmod 1775 /
    Press Return.
    Type: reboot
    Press Return"
    What have I to write exactly ? Just "mount -uw /" and then enter and then "chmod 1775 /"? Because when I do that, nothing happens. Just an other "localhost:/ root#" is write. Same for:
    "Type: mount -uw /
    Press Return.
    Type:
    mv /Library/Preferences/com.apple.loginwindow.plist preferences2.old
    Tip: There is a space between ".plist" and "preferences".
    Press Return.
    Type:
    mv /Library/Preferences/com.apple.windowserver.plist preferences3.old
    Press Return.
    Type: reboot
    Press Return."
    What have I to right exactly before or/and after this commands?
    Thanks a lot for help

  • Please help me on the below issue.

    Hello All,
    We are using ERP integrator to pull data from Oracle EBS 11i and to load to HFM EPMA application. There is one specific account is there when i go and check in EBS data base in APPS.GL_CODE_COMBINATIONS table coloumn Account_type the account type its showing its as Expense. But when its import into ERP integrator in ERP integrator for some records its showing it as revenue and for some records its showing it as expense. Please help me when it shows the data  in ERP integrator work space page from which table it connects to show the data in ERP integrator workspace page. The account which is creating problem previously it was Expense account type in EBS now the account type has change to Revenue.
    Thanks in Advance.
    Regards,
    Sree

    Have you attempted to backup and then clear the AIF_EBS_GL_CCID_STG table and then re-ran your data load rule with the "Full Refresh" option?
    If not, you will want to do this and then check the account type in the table after the data load rule run.
    Refer to the following KM Document for information on clearing the table:
    ERPI Code Combinations are Out of Sync With EBS (Doc ID 1473119.1)

  • Where's "isturk", please help me to solve my issue.

    Dear isturk ,
    I have problem about jsp with crystal reports as same as you saw before.
    I search and know about you can solve it, I see at this link:
    http://forums.java.sun.com/thread.jspa?threadID=623199&messageID=3542599
    I know you can fixed it, please please please help me.
    If any person can solve my problem please let me know.
    Thank you so much.
    Wechy.

    no one help me.
    Oh goddddd...
    help me please please please.

  • HT1212 My Ipad has shut off I guess and cannot get it to turn back on! Please help It is a school issued product and is needed for school. I have it plugged up but it doesnt even say that is charging.

    I had my Ipad up on a charger in my class and when I went to pick it back up the screen wouldn't turn on or do anything. Please help!!

    While aimed at the iPhone, the sections under Power/Battery and Display in this support article will largely still apply and may be of help:
    http://support.apple.com/kb/TS2802
    If not, your iPad may have suffered a hardware failure, in which case you'll have to ask your school how to proceed.
    Regards.

Maybe you are looking for

  • Migrated PAR file does not appear in PCD

    Hi, I have migrated a par file, using the migration tool, and deployed the ear file successfully using NWDS. I can see the deployed application in NWA but not in PCD, under 'Portal Application'. I am missing something?

  • Subcontracting Multiple Vendors

    Hi, i have one business process relating to subcontracting . material has to supply to subcontracting vendor2 directly from the subcontracting vendor1. in this scenario i have pay money to both subcontarcting vendors I tried this scenario but not abl

  • USB 8451: Is the timeout controllable when doing a I2CREAD I2CWRITE?

    Sorry if this isn't in the correct board. I am using the NI USB-8451 to do I2C communication to talk to multiple devices.  I would like to put some functionality into my program to build up a list of devices that are connected on the bus.  It will at

  • Speedgrade parallel layer work-around

    I have used Davinci and am now currently using speedgrade to color a film I am working on. I know in Davinci you have the possibility of creating a secondary edit to by pass skin tones so that you can effect skin tones and the rest of your scene on d

  • I think I did something stupid with iSync

    I am trying to get my Treo 650 to sync with my powerbook and iCal, specifically. Someone told me to get the isync conduit and install it and badda bing, my ical should sync with my treo. problem is, is now I cannot open isync, and when I try to insta