Please help me out with something simple.

I know this is simple probably to figure out but I really want to make sure that I do this correctly.
So please if someone could tell me exactly how to get my ipod working.
Do I need to re-install itunes if I had it on here for my old ipod?
And when do I set up my ipod to be charged and all?
Do I launch itunes first and then plugg in my ipod?
I know this must be really an anoying question, but I just want to be safe.
Thanks
? Windows XP ?

Let me take a whack at this and see if I can help at all.
Do I need to re-install itunes if I had it on here for my old ipod?
itunes is not ipod specific. You can update multiple ipods with the same itunes library. Now ipods are itunes library specific though. If you try to sync your ipod with a separate itunes library without having it sync manually, it will erase all your media and replace it with the current library.
And when do I set up my ipod to be charged and all?
Your ipod will charge whenever it senses a viable charge input (usb connection, wall charger, car charger)
Do I launch itunes first and then plugg in my ipod?
You can, but you don't have to. When you open itunes, it will search for any ipods plugged into your computer. There is also a setting in which you can have your ipod automatically open up itunes for you when you plug in your ipod.
I hope this helps

Similar Messages

My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to lissen I had to put on loud speaker or to use handsfree please help me out with this problem if some body have answer?

My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to listen I had to put on loud speaker or to use hands free please help me out with this problem if some body have answer?

Hi Venkata from NZ,
If you are having an issue with the speaker on your iPhone, I would suggest that you troubleshoot using the steps in this article -
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Firefox is not able load any websites but others programs can. i tried everything given in the support forum but nothing worked out. so can you please help me out with it?

firefox is not able to load any websites... i tried everything given in the support forum under the topic firefox is not able to load any websites but other programs can.. but still i am facing the same problem. so please help me out with this issue!!

firefox is not able to load any websites... i tried everything given in the support forum under the topic firefox is not able to load any websites but other programs can.. but still i am facing the same problem. so please help me out with this issue!!

Please help me out with some fundamentals in BW

Hello,
Please guide me regarding the below mentioned questions.
1. what is the key date in query designer.
2. when do we perform attribute change run
like once the master data is loaded then we perform attribute change run and load the transactional data ?
3.what is the disadvantage of using aggregates.
4. what is full repair options?
please help me out with these questions

HI,
Repair full request :
If you indicate a request in full update mode as a repair request, then it is able to be updated in all data targets. This is also true if they already contain data from initial runs or deltas for this DataSource / source system combination, and they have overlapping selections.
Consequently, a repair request can be updated at any time without checking each ODS object. The system supports loading in an ODS object by using the repair request without having to check the data for overlapping or request sequencing. This is because you can also delete selectively without checking an ODS object.
Posting such requests can lead to duplicate data records in the data target.
Hierarchy/attribute change run after loading master data;
When hierarchies or attributes of characteristics change, the aggregate affected by the change can be adjusted manually or calculated automatically in process chains.
Aggregates:
Aggregates are materialized, pre-aggregated views on InfoCube fact table data. They are independent structures where summary data is stored within separate transparent InfoCubes. The purpose of aggregates is purely to accelerate the response time of queries by reducing the amount of data that must be read in the database for a given query navigation step. In the best case, the records presented in the report will exactly match the records that were read from the database.
Aggregates can only be defined on basic InfoCubes for dimension characteristics, navigational attributes (time-dependent and time-independent) and on hierarchy levels (for time-dependent and time-independent hierarchy structures). Aggregates may not be created on ODS objects, MultiProviders or Remote Cubes.
Queries may be automatically split up into several subqueries, e.g for individual restricted key figures (restricted key figures sales 2001 and sales 2002). Each subquery can use one aggregate; hence, one query can involve several aggregates.
If an aggregate has less than 15 components, BW 3.x puts each component automatically into a separate dimension that will be marked as line item (except package and unit dimension); these aggregates are called flat aggregates. Hence, dimension tables are omitted and SID tables referenced directly. Flat aggregates can be rolled up on the DB server (i.e., without loading data into the application server). This accelerates the roll up (hence the upload) process.
Disadvantage : The more aggregates exist, the more time-consuming is the roll-up process and thus the data loading process; the change run is also affected.
Hope this info Helps.
Thanks,Ramoji.

Please help me out with the function code of print option in module pool

please help me out with the function code of print option in module pool, along with CASE condition.
regards,
asif

Hi
you can use the Function module
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
    destination            = 'LP01'                       "'Printer name
    list_name              = 'TEST'
    list_text              = 'SUBMIT ... TO SAP-SPOOL'
    immediately            = ' '
    line_size              = '2000'
    no_dialog              = 'X'             "pass space to Pop screen for Print option
IMPORTING
    out_parameters         = wa_pri_params
    valid                  = w_valid.
"next call below things
NEW-PAGE PRINT ON NO DIALOG PARAMETERS wa_pri_params.
     "and try to Print the values inside the new-page
NEW-PAGE PRINT OFF.
Prabhudas

How to access the activities created by an enduser especially when the enduser has left the organization?Please help me out with the possible solution

How to access the activities created by an end user especially when the end user has left the organization?Please help me out with the possible solution

Hi Ramesh,
In the web UI we have business role IC_manger where you can search the activities based on employee responsible and you can use business transaction assignment functionality to assign those activities to any other end user or team.
Else you can also use Agent inbox functionality if you have configure the agent inbox for those activity.
Hope this helps solving your query

Please help me out with embedding!

HI CAN ANYBODY HELP ME OUT. OUR TEAM IS WORKING ON A SITE N I
HAVE JUST CREATE A ANIMATION IN FLASH CS3 BUT WHEN I MAKE .SWF FIE
IT WILL NOT SHOW UP ON WINDOWS I THINK WE NEED TO EMBEDD FONTS.
PLEASE HELP ME OUT ASAP.

tanya Verma wrote:
> HI CAN ANYBODY HELP ME OUT. OUR TEAM IS WORKING ON A
SITE N I HAVE JUST CREATE
> A ANIMATION IN FLASH CS3 BUT WHEN I MAKE .SWF FIE IT
WILL NOT SHOW UP ON
> WINDOWS I THINK WE NEED TO EMBEDD FONTS. PLEASE HELP ME
OUT ASAP.
>
Give us link to the problematic file so we can check it out.
Meantime - if you animate regular text and use STATIC font,
you don't need to embed
anything. Make sure text is not set to DYNAMIC.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Please help me out with "Data only excel option "

Post Author: pavan pusuluri
CA Forum: Crystal Reports
When i am trying to spool the data with data only excel option using crystal reports XI, the records are appearing in two rows instead of single row. i have studied that when we use data only excel option entire record will be displayed in a single row,but it is not appearing in that way.Please help me out in fixing this bug. I am very much new to crytal reports.

Post Author: pavan pusuluri
CA Forum: Crystal Reports
I thank you for the prompt reply.
All the field are of same size and height. The format is fine. The report is designed in such a way that data is displayed in three detail sections. What i would like to have is " i want the data in these three sections to be displayed in a single row when i select the data only excel export option".Please help me out in fixing this issue.
Thanks in anticipation

Help me out with a simple dialog box task

i have used a single dialog box connected to a case structure..but the problem is it only executes true case after pressing "OK" button.
i need the false case to keep on executing untill "OK" button is pressed.. please heelp me out..

I agree that the spamming of the same question over and over is annoying and makes me LESS likely to help you. However, I will try to answer you.
I believe that you are probably fairly new to LabVIEW. LabVIEW is a dataflow language. As such, each node operates as soon as all of its nodes have data. Your One Button Dialog Box does not produce data until the button is pressed. Therefore, there is no way for the Case structure to execute either the True or the False case until the One Button Dialog Box produces its data.
So, there are several ways to work with this. Several have already been suggest in this or one of the other 3 queries.
You could place the button on the front panel. If it is on the front panel, it will be read immediately and the value of the button will be available. If it is inside of the loop, the value will be available each time the loop is run. So the suggestion to use a button on the front panel would be a good one.
If you need to use the dialog box, you could use a producer-consumer architecture. The dialog would be in the producer and the case code would be in the consumer. I think that this is not as good of a solution, but if this is part of a larger application it may be desirable to you for other reasons. There is an example producer-consumer that you can find in the example finder and I think that there is a template for one as well.
There are other ways to do this as well, but they get more and more complicated and I don't think you have the experience necessary to accomplish them. I also don't think you need to make things that complicated for such a simple task.
Good luck and try not to duplicate questions again.
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

Please help me out with this error:Logical dimension table D_TARGET has a source D_TARGET that does not join to any fact source.

I get the folowing error when I run the global consistency check
WARNINGS:
Business Model DAC_Measures:
[39008] Logical dimension table D_TARGET has a source D_TARGET that does not join to any fact source.
Can someone help me out please?
Thank you!

It seems your dimension is not joined to any facts. Did you check your BMM/physical joins?

Please help me out with my code I am writing MSG ACCEPT & REJECT

Please anyone help me...
I am using MSG ACCEPT and REJECT...
but my code when I execute it...it keep show out MSG REJECT...
Please help me...Thanks a lot....
public class Addmission
public static void main(String[] args) throws Exception
char Message;
double GPA = 3.0;
int ATS = 60;
int ATScore = 80;
System.out.println("Enter your Grade Point Average");
GPA = (char)System.in.read();
System.out.println("Enter your Addmission Test Score");
ATS =(char)System.in.read();
System.in.read(); System.in.read();
     if(GPA >= 3.0 && ATS == 60)
System.out.println("Accept");
if(GPA <= 3.0 && ATScore == 80)
System.out.println("Accept");
else
System.out.println("Reject");

see the implementaiton of readAFloat() ...
implementation of readAnInt() is left as an exercise to you.
cheers
public class Addmission
public static void main(String[] args) throws Exception
char Message;
double GPA = 3.0;
int ATS = 60;
int ATScore = 80;
System.out.println("Enter your Grade Point Average");
GPA = readAFloat();
System.out.println("Enter your Addmission Test Score");
ATS = readAnInt();
System.out.println(" Your GPA ["+GPA+"]");
System.out.println(" Your ATS ["+ATS+"]");
if(GPA >= 3.0 && ATS == 60)
System.out.println("Accept");
if(GPA <= 3.0 && ATScore == 80)
System.out.println("Accept");
else
System.out.println("Reject");
public static float readAFloat() throws Exception {
     byte ba[]=new byte[10];
     int len;
     len=System.in.read(ba, 0, ba.length);
     String s = new String(ba, 0, len);
     float f=Float.parseFloat(s);
     return(f);
public static int readAnInt() throws Exception {
     return 80;

I am new to illustrator. Please help me out with this.

I am totally confused about how is it done
I created a stripes pattern but when applying it to the font it overlaps at the closing edge of the font. Please help my if there is a tutorial for doing this.

Sidaddict,
You can create it from a combination of carefully chosen straight (open) paths and closed paths, especially using Object>Path>Offset Path by the distance between paths, using operations like Object>Path>Divide Objects Below on certain copies of paths along with cutting with the Scissors Tool, general copying, and deleting unwanted parts underway.
View>Smart Guides are your friends.
The (18) vertical paths may be created by moving copies or from a tall thin rectangle using Object>Path>Offset Path, or just by moving a copy multiple time, then cut as desired.
The B may be created from a (partially overlapping) double set based on the innermost closed (upper) path using Object>Path>Offset Path, and moving a copy, then deleting unwanted parts.
The E and the text frames may be created from rectangles corresponding to the innermost of a series of closed paths, then using Object>Path>Offset Path, then deleting unwanted parts.
If the vertical lines are created as closed paths, copies of the outermost shapes of the B, E, and text boxes may be used to cut them using Object>Path>Divide Objects Below.
Throughout, you need to think ahead and build/remove paths. Especially important is to see how the desired shapes can be built from an original closed path (set) using offset path, such as the B, E, and text boxes, where you need to imagine the parts to be later deleted again.

I'M NEW TO THIS, i hope someone can help me out with something so simple...

Hello all
i'm a first time user with java...my editor is Visual J++ (trial ed)...i'm testing out java to see if i want to use this for my company. for the past 4 days i've been trying to figure out how to connect to a database (i'm using MS SQL SERVER 2K) i've already posted in the JDBC Fourm...but found no answer...I apologize if I'm posting in 2 different forums at same time...but you gotta feel me on this, over 4 days on just trying to connect is not healthy LOL....
I already downloaded the driver from MS. Installed it followed the user guide (acrobat pdf file) on how to implement it...but i'm still stuck and haven't reached no where....what i want to do is a simple select statement but i can't do that without connecting first....maybe one of you out there has a sample code who uses MS SQL SERVER 2K...or someone can just be a miracle and help out on my code....the code will be attached below
import java.awt.*;
import java.awt.event.*;
import java.sql.*;
public class AccessApp extends Frame
     TextField driver = new TextField(80);
     TextField url = new TextField(80);
     TextField sql = new TextField(80);
     Button doIt = new Button("Do it!");
     TextArea resultArea = new TextArea(10,60);
     public static void main(String args[])
          AccessApp app = new AccessApp();
     public AccessApp()
          super("AccessApp");
          setup();
          pack();
          addWindowListener(new WindowEventHandler());
          show();
     void setup()
          setupMenuBar();
          setLayout(new GridLayout(2,1));
          Panel topPanel = new Panel();
          topPanel.setLayout(new GridLayout(4,1));
          Panel panels[]=new Panel[4];
          for(int i=0;i<panels.length;++i)
               panels=new Panel();
               panels[i].setLayout(new FlowLayout(FlowLayout.LEFT));
          panels[0].add(new Label("Driver:"));
          panels[0].add(driver);
          panels[1].add(new Label("URL: "));
          panels[1].add(url);
          panels[2].add(new Label("SQL: "));
          panels[2].add(sql);
          doIt.addActionListener(new ButtonHandler());
          panels[3].add(doIt);
          for(int i=0; i<panels.length; ++i)
               topPanel.add(panels[i]);
          add(topPanel);
          add(resultArea);
     void setupMenuBar()
          MenuBar menuBar = new MenuBar();
          Menu fileMenu = new Menu("File");
          MenuItem fileExit = new MenuItem("Exit");
          fileExit.addActionListener(new MenuItemHandler());
          fileMenu.add(fileExit);
          menuBar.add(fileMenu);
          setMenuBar(menuBar);
     void accessDB()
          try
               Class.forName(driver.getText()).newInstance();
               Connection connection=DriverManager.getConnection(url.getText());
               Statement statement = connection.createStatement();
               boolean hasResults = statement.execute(sql.getText());
               if(hasResults)
                    ResultSet result = statement.getResultSet();
                    if(result!=null) displayResults(result);
               else resultArea.setText("");
               connection.close();
          catch(Exception ex)
               resultArea.setText(ex.toString());
     void displayResults(ResultSet r) throws SQLException
          ResultSetMetaData rmeta = r.getMetaData();
          int numColumns=rmeta.getColumnCount();
          String text="";
          for(int i=1; i<=numColumns; ++i)
               if(i<numColumns)
                    text+=rmeta.getColumnName(i)+" | ";
               else
                    text+=rmeta.getColumnName(i);
          text+="\n";
          while(r.next())
               for(int i=1;i<=numColumns;++i)
                    if(i<numColumns)
                         text+=r.getString(i)+" | ";
                    else
                         text+=r.getString(i).trim();
               text+="\n";
          resultArea.setText(text);
     class ButtonHandler implements ActionListener
          public void actionPerformed(ActionEvent ev)
               String s=ev.getActionCommand();
               if(s=="Do it!") accessDB();
     class MenuItemHandler implements ActionListener
          public void actionPerformed(ActionEvent ev)
               String s=ev.getActionCommand();
               if(s=="Exit")
                    System.exit(0);
     class WindowEventHandler extends WindowAdapter
          public void windowClosing(WindowEvent e)
               System.exit(0);
I hope this helps
and hopefully someone will respond

First use JPanel not Panel.
Panel panels[]=new Panel[4];becomes
JPanel panels[]=new JPanel[4];Then refactor your code so that you use arrays correctly:
panels=new Panel();
panels.setLayout(new FlowLayout(FlowLayout.LEFT));becomes
panels=new JPanel();
panels[i].setLayout(new FlowLayout(FlowLayout.LEFT));
I did the above changes to your code and it worked fine.
Dave

Can someone please help me out with a task on Photoshop? I am willing to pay!

Hi everyone,
I'm looking for someone who is skilled in using Photoshop (or a similar program) to edit PDF documents.
I don't want to post my entire document here, as it includes personal information, but you can download a sample of the document I need you to work on here:
http://www.4shared.com/folder/Pc7enLBn/_online.html.
Where there is a letter grade written (for example, DI), I would need that changed to something else (for example, HD, or in some cases - grade not available). I would need this done HIGHLY accurately, with absolutely no room for error.
I do have my reasons for doing this, and I am happy to provide them to the person who would like to undertake the job.
I am prepared to pay you a negotiable amount of money - potentially something around $50, or more, if need be. I can transfer the money through online banking.
Additionally, I will need this job completed ASAP - approximately 24 hours from when I send you the main file.
If you are interested, please email me at the email address I created for this job: [email protected], or provide your email address here for me to contact you. If you have any relevant qualifications or experience, please tell me.
Many thanks, and I look forward to hearing from you soon!

Your task is hardly a case for Photoshop: replacing text accurately in a scanned, not even
straightened image.
My recommendations:
a) put a crossreference list on each page
   or
b) straighten the scans and improve the contrast, both by Photoshop.
   Then apply a program which converts images of text into machine coded text
   by OCR - Optical Character Recognition , for instance Abbyy Finereader
   http://finereader.abbyy.de/professional/?adw=google_eu&gclid=CMirrcCMx7MCFZHRzAodlisAJg
   (I'm not related to the manufacturer of this software, I'm just a user).
   In coded text it's easy to replace isolated character groups as required.
Best regards and good luck --Gernot Hoffmann

Can you please help me out with the answers

u2022     Created a report to display details of the Open Picking Slip for a given Shipping Point and Delivery Date.
u2022     Developed a report program for stock details in various storage locations. Which displays material number, material group, material description, quantity and plat based on selection screen fields material number and plant number.
u2022     Created a ALV to display the customer arrears report.
u2022     Developed a BDC program to upload Customer master data from legacy to sap system using Call transaction method.
u2022     Modification of Standard Sap script layout set for Sales Order output and printed SAP Scripts using print programs.
u2022     Using SAP Standard Report program RSTXLDMC to upload logo and display it as Standard text

Mazhar,
Maintain the hierarchy for the object and in the Hierarchy display properties of that info object you can maintain the levels.
If the values are appearing in Unassigned then you need to check out the hierarchy definition once. Please check out that and revert back if you have the same issue repeats.
Hope this helps...
Regards
Gattu

Please help me out with something simple.

Similar Messages

Maybe you are looking for