Please help me ...premiere cs4 and hollywood fx

i'm try setup with vestions,but i don't see Pinnacle in premiere.

There WAS a way to change the file extensions for Hollywood FX, and that would work with certain versions of PrPro. Do not recall the version limitations, or the exact steps to take. Think that I have a bookmark someplace. If I can find it, I will post it. Maybe will work in CS4, but maybe stopped being viable with CS3 - just do not remember.
Good luck,
Hunt

Similar Messages

I forgot my icloud account and my email how can i recover it please help me icloud maker and icloud password and username holder

i forgot my icloud account and my email how can i recover it please help me icloud maker and icloud password and username holder

If you don't know your ID, you can try to find it as explained here: http://support.apple.com/kb/HT5625. Then you can reset the password as explained here: http://support.apple.com/kb/PH2617. Of course, you can only do this if it's your ID.

Hi there, can anyone please help? Download itunes and it says The Itunes library .itl file is locked, or on a locked disk or you do not have write permission for this file.

Hi there, can anyone please help? Download itunes and it says The Itunes library .itl file is locked, or on a locked disk or you do not have write permission for this file.

Holding down the shift key while iTunes is opening. That will bring up the 'choose iTunes library' dialog. Select 'Choose LIbrary' from the choices and navigate to your music folder and iTunes music folder.
Or refer to this article:
iTunes for Windows XP: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
http://support.apple.com/kb/HT1866

Please Help me in Labview and MS Access Database Connective

Please Help me in LabVIEW and MS Access Database Connective through an example . I am new to LabVIEW .I need simple example that take a data from a table and display it on front panel .
thanks in advance .

duplicate post

My macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does

my macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does not even let me turn it on

Have you attempted to reset the SMC? That would be the first step. Hold the left control, option, shift key and the power button for about 5 seconds and release. Then try to reboot. Might as well reset the PRAM as well. Hold command, option, P, R on start up until the machine restarts. If that doesnt' have any affect we'll have to dig deeper into a potential hardware failure.
If this method doesn't work, check the webcam that will tell the problem is on the iSight & WiFi cable. If your webcam is ok, then it'll be the WiFi card problem. Hope it can help ;-)
- xia_us9

I am having a problem converting word onto PDF . PDF into word.Please help .I am signed and paid to Feb 2015

Can someone advise me why I am having this problem

Always in the past .I have my Word Document on screen and then I go to
Publish and it atomatically PDF the doc.
The same if I have a PDF to convert to word. I have the PDF on screen and
to the right of my screen it will say Convert .I press on convert it
converts to word
In a message dated 12/17/2014 10:01:32 A.M. Eastern Standard Time,
[email protected] writes:
I am having a problem converting word onto PDF . PDF into word.Please help
.I am signed and paid to Feb 2015
created by florencejohn (https://forums.adobe.com/people/florencejohn)
in Adobe Acrobat.com Services - View the full discussion
(https://forums.adobe.com/message/7023171#7023171)

Dear Apple,please help me.the glitch and lags on games made me sad beause i am too love with my 4s. Why iOS 7 really made me sad...please help me.im beg for you.

Dear Apple,please help me.the glitch and lags on games made me sad beause i am too love with my 4s. Why iOS 7 really made me sad...please help me.im beg for you.

www.apple.com/feedback/iphone.html
No one from Apple is listening on these forums.

ITune message is asking iPhone restore while I am trying to transfer pictures and video from the iPhone to iTune. Before that, software update is suggested. The display on iPhone is stacked to iTunes connection sign. Please help to save pictures and let i

While trying to import pictures from iPhone to iTunes, iTunes request to make software update and then to restore iPhone. I have cancelled the restore to rpotect pictures. The pictures have not been imported yet, but the iPhone display freezed at ITune connection page. Please help me save pictures and use the iPhone as usual. Restarting of the phone did not work so far.
Ringomon

If the device is in recovery mode there is no date on the device to salvage.
Restore the device.

Need help with Premiere CS4 Export...

I currently shoot HD video with a Canon Vixia HF S10 digital camcorder (link goes to Canon's site). I shoot at the highest quality available, MXP 24 Mbps (1920x1080). When I bring the video over to my machine, it comes over as an .mts file which is the AVCHD file format (link goes to Wikipedia article on the format). I import these .mts files into Adobe Premiere (CS4). I import them into a AVCHD 1080p30 (29.97) Sequence. I do my editing, adding title screens, music, whatever. The problem comes when I go to export the final product into a usable format. I've tried all different sorts of formats to export to and I can't get any usable results. If I select, for instance, H.264 HDTV 1080p 29.97 High Quality (a preset within Premiere) the video comes out extremely choppy...as in the audio will play and the video will hitch along and be mostly out of sync dropping whole sections of the video as it tries to catch up.
My end goal is to be able to export two versions...a higher quality (maybe burned to a DVD or Blu-Ray) and a lower quality (but still HD) for uploading to YouTube/SmugMug.
Any help or thoughts anyone may have would be greatly appreciated.

Hmm... My CS5/AVCHD 1st Impressions http://forums.adobe.com/thread/652694?tstart=0 includes a link to what I built for CS5
Your computer is going to be a bit slower, but I don't see anything really obvious that would cause the output to be choppy
But... have you considered converting to HDV to see if that edits better for you?
Convert AVCHD to HDV http://forums.adobe.com/thread/390605?tstart=0
or use Cineform Neo Scene http://www.cineform.com/neoscene/
Added... Looking at my notes, I use a different AVCHD setting in CS5... have you tried other AVCHD project settings?

Help with Premiere Pro and Elgato HD Capture

I use the Elgato Game Capture HD to record gameplay. ( i am new to premiere pro) . I am trying to make a YouTube video with 720p footage. When I try playing the video it is jumpy and its like a bunch of pictures playing. I think the frames are off. I dont know how to fix this problem. Can someone please help?

First, are you doing this to be sure your sequence and video match?
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341
2nd, does http://forums.adobe.com/thread/1163126 help?

Please help me setup CS4 scratch disks etc

Hey everyone
I just bought CS4 Premiere Pro and I really want to set it up correctly.
I am editing 1080p AVCHD video from my Canon HG21 HD Camera, but I need to find out how to properly set up scratch disks etc.
I guess you have the program running on one hard drive, the media that you are editing on another, and a scratch disk on another hard drive?
I don't totally understand how to set this up.
My current rig is an i7 920, 6gb 1600 mhz ram, 4870x2, 3 WD HDD's. The HDD the program is installed on is a 7200 rpm drive but I think the others are 5400? I'll have to check that out.
Thanks for your help.

Hi Harm,
Thanks for your reply! I just checked and all three of them are 7,200 RPM drives, I will set my projects and scratch disks as you advised.
Also just a quick question, I am using the following preset on Premiere Pro CS4 with my Canon HG21 Camera, but how will I know for sure that it's the correct preset to use with the footage that I will be using from the camera? Sorry it's a pretty amateurish question but I am really starting from the ground up and would like to get things right from the start:
AVCHD>1080p: AVCHD 1080p25
For editing AVCHD Formats recorded in 1920x1080 square pixels (non-anamorphic).
16:9 progressive-scan 1080p HD video at 25 frames per second.
48kHz audio.
General
Editing mode: AVCHD 1080p square pixel
Timebase: 25.00fps
Video Settings
Frame size: 1920h 1080v (1.0000)
Frame rate: 25.00 frames/second
Pixel Aspect Ratio: Square Pixels (1.0)
Fields: No Fields (Progressive Scan)
Audio Settings
Sample rate: 48000 samples/second
Default Sequence
Total video tracks: 3
Master track type: Stereo
Mono tracks: 0
Stereo tracks: 3
5.1 tracks: 0
Submix mono tracks: 0
Submix stereo tracks: 0
Submix 5.1 tracks: 0
Thanks again for your help.
Regards.

Premiere CS4 and Lagarith Codec Issue !

Gentlemen !
Windows 7 Ultimate
Premiere CS4
6GB Ram
I was working on a project using 720P footage and finished the project, then I sent it to AME to encode the output file to Windows AVI using lagarith Codec.
The final output AVI video plays perfect on my PC but when I took it to our satellite channel , we were getting the error code something like "Codec missing or needed to play this file "
I guess they try to download the Lagarith Codec , but for reason still didn't work and was displaying the same error.
Do you have any idea , which codec I can use , which can be more standard so their system can play it .
I was asked to provide them with .Mov (Quicktime) or Windows AVI file type !
Thanks !!

Ok Thanks again Benn !
Well, here is the situation.
My footage is HD 720p
My project and sequence settings match my source footage perfectly
I rendered my song for 2 different formats, once I rendered it for YouTube, which I used a YT preset from AME, and it plays perfect.
Now I have to have another version of this song in SD format, it could be Quicktime or Microsoft- Windows AVI.
I tried Miacrosoft AVI, the audio plays fine but the video is in Slow Motion, also out of sync with audio...
I tried Windows media , but the fina videol size is only 59MB
Any Help will be Appreciated !

Compatible HDV formats between Premiere CS4 and AE CS4?

Sorry if this has been covered before.
I'm new to CS4 Production Premium, (but not Premiere in general), and I'm having trouble finding a compatible format that I can use between AE CS4 and Premiere CS4. I'm using 1080i HDV captured from a Canon XHA1.
Premiere CS4 reads it just fine, but I cant get it into AE.
Thanks in advance for any comments.
Andy

once I understood it was only a one way street per use.
It can be sort of two-way.
http://help.adobe.com/en_US/PremierePro/4.0/WS4674B366-D7E4-4778-94BE-B663666435F8.html

Premiere CS4 and .swf

Hello,
I was given a .swf file, the video shows an object in rotation. However, when I put into cs4, it reads as a still image and the video will not rotate. All I have is the .swf file, not the orginal project. Any ideas? Is it possible to open the .swf in Flas and export it as a avi or mov? The only solution I found was converting it to a .mov using a third party software, but I lose the alpha channel.
Thanks for all your help

I've successfully imported and edited SWFs in Premiere Pro, but I've seen the issue you're talking about, as it's happened to me several times before I found what was causing it. Make sure that in your Media Preferences (Edit > Preferences > Media) the option "Write XMP ID to Files on Import" is UNCHECKED. This option causes Premiere to write a bit of information into the header of any imported media file that helps the system track it. Unfortunately, this breaks SWF files--you'll actually need an original copy of the file because you can't fix the file once the damage is done. Hope you have backups!
If that option is already unchecked, post back...

PLease Help!! Leopard and Blue Screen

I know there is a lot of discussion out there about a blue screen after installing Leopard. Well I had leopard installed and working for a while and then one day i started having issued where iTunes would lock up my MacBook and I would have to restart the MacBook because i could not stop it from "determining gap less playback" It would do it every time i plugged in my iPhone or my iPod. So everything was working great other than the iTunes issue. Then one night while my wife was using the MacBook it turned off on her so she proceeded to turn it back on only to have it boot up to a blue screen. Keep in mind we had been running Leopard for a few months this was not a brand new install. I purchased my MacBook used from a fried who did not provide me with the CD/DVD's to restore the MacBook since he lost them in his move. So I have searched far and wide trying to resolve this issue. I have booted into Single user mode and did the command prompt options...
1. Reboot into single-user mode (hold Cmd-S while booting machine)
2. Follow the directions OSX gives you when you get to the prompt (I think these were them - just type the two commands it tells you to):
fsck -fy /
/sbin/mount -uw /
3. Remove the following files:
rm -rf /Library/Preference Panes/Application Enhancer.prefpane
rm -rf /Library/Frameworks/Application Enhancer.framework
rm -rf /System/Library/SystemConfiguration/Application Enhancer.bundle
rm -rf /Library/Preferences/com.unsanity.ape.plist
4. Exit, to continue booting normally
exit
restart
I have tried to boot the MacBook in safe mode with no luck. I think i have done everything i can. I called Apple support and was told that the MacBook is out of warranty by 408 days. Can i buy the restore CD/DVD? Is there something that I am missing? What am I not doing? Please help me???

Does the Blue Screen happen after the Gray screen with the Apple logo and the spinning gear below it or when you turn on the computer you see the blue screen right away? You can try resetting the PRAM. Turn on the computer while holding the CommandOption+PR. These buttons will reboot your computer manually so let go after you saw the computer restart by itself. You also mentioned that you installed Leopard on your computer. So do you still have the Leopard install disk with you? If you do, boot from that disk. With the Leopard disk inside your optical drive, press the C key while turning it on. Once booted, try do repair the disk permissions and disk in Disk Utility.
Hope this helps.

Please help me ...premiere cs4 and hollywood fx

Similar Messages

Maybe you are looking for