Please help me regarding VAR customer create new message in work center

Hi, guru
I have encountered with a problem regarding, for example, when VAR customer 'X' create new message in work center and specify message processor to partner no '1' (partner no 1 has employee role with username 'A' in BP) but when username 'A' log on and open work center via SAPGUI to find a new message created to him, username 'A' did't got a new message from VAR customer 'X' whom choose specify message processor to him and work center show My Messages (0)
why, do I set something config wrong ?
Any recommend would be appreciated
thank you very much

Hi
1) can you check in CRM_DNO_MONITOR and oepn the ticket , whethere the processor name appearing in the ticket?
2) Does your customer assign the processor manually or any automatic support team assgnemt, if so please verify your automatic support tean assignment against the blog
[/people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination|/people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination]
3)Might be an authoraisation issue of the Processor. assign SAP_ALL access and check again
[Service desk roles|http://help.sap.com/saphelp_sm32/helpdata/en/0a/f12c41ab78f66fe10000000a1550b0/content.htm]
Thanks,
Jansi

Similar Messages

PLEASE help!!!!my new comp isnt working!!!!!

Okay, i am building a new system, i bought most parts and kept some from original computer, i have put them all together, and the computer starts but i see no picture(my old sytem is 1 and half years old, so it isnt that old), the hard drive is starting up, the vedio card starts up, the cpu stats up, no bios picture,no picture!!!!!!, im not sure if its the old parts that are causing the problem, ll list the specs below, if anyone can help me, please tell what is causing the issue, ive ruled out all new parts and i think its either the ram, psu or harddrive, im pretty sure the harddrive isnt at fault. those parts i havent uprgraded, just used em with new system... i need help fast, because i have no computer working atm! and i dont wont to waste money!!!
msi k8n neo4 fi
amd 64 3000+ 939
xfx 7800gtx 256mb vedio card
***(old parts) 120gb ide ultra segate hdd
***(old parts) 2x512mb hynix ddr400 ram i think
***(old parts) orignal psu, 440wt max
17inch lcd montior
dvd rom
dvd rw ....
****() symbolises my old parts i am still using.. help will be much appreciated, i am using the internet at the local library, so please need responses fast to fix my problem.. i have set all jumpers accordingly, i am ameter user with computers, so i know a fair bit, but this is very wierd, im thinking maybe ram is the issue...

I used some old parts I had to build a 2005 Media Center Edition computer. I used a old Pentium 4 2.8 and got a new Asus P4P 800-E Deluxe board. It supports very large hard drives to record TV. I used an IDE hardrive and I had to reinstall the operating system twice, because I forgot to disable the Raid in the bios. It was looking for a Raid System and couldn't find one. When Windows installed it rebooted and I disabled the Raid Controller in the bios, it worked great after that.
I am using 2 SATA WD Raptors on my MSI board, but I hear people saying to use the Microsoft IDE contoller drivers instead of the nVidia ones for IDE drives. Good Luck!

Please help me regarding report below which already doen't working..Urgent

tables:
t179,t179t,vbap,S001,MVKE.
data: begin of i_stufe occurs 100,
      stufe like t179-stufe,
      digit(2) ,
      end of i_stufe.
data: begin of i_stufe1 occurs 100,
      stufe like t179-stufe,
      digit(2) ,
      end of i_stufe1.
data: begin of i_stufe2 occurs 100,
      stufe like t179-stufe,
      digit(2) ,
      end of i_stufe2.
data: begin of i_svy occurs 100,
      svy like t179-stufe,
      end of i_svy.
data: b(3).
i_svy-svy = 1.
APPEND i_svy.
data:v_n type i,
      v_n1 type i,
      v_prodh like t179-prodh,
      v_digit type i.
data i_repid like sy-repid.
data i_lines like sy-tabix.
Data for ALV display ************************
TYPE-POOLS slis.
DATA : ls_slis_layo TYPE slis_layout_alv,
         lt_slis_fcat TYPE slis_t_fieldcat_alv ,
         it_sort TYPE slis_t_sortinfo_alv,
         ls_sort TYPE slis_sortinfo_alv.
DATA : wa_slis_fcat TYPE slis_fieldcat_alv.
DATA : alvfcwa TYPE slis_fieldcat_alv.
DATA: begin of itab occurs 0 ,
vkorg like s001-vkorg,
vtweg like s001-vtweg,
spart like s001-spart,
kunnr like s001-kunnr,
matnr like s001-matnr,
prodh like t179-prodh,
vtext like t179t-vtext,
select type c ,
p1 LIKE prodh-zzprodh1,
t1 LIKE t179t-vtext,
p2 LIKE prodh-zzprodh2,
t2 LIKE t179t-vtext,
p3 LIKE prodh-zzprodh3,
t3 LIKE t179t-vtext,
p4 LIKE prodh-zzprodh4,
t4 LIKE t179t-vtext,
p5 LIKE prodh-zzprodh5,
t5 LIKE t179t-vtext,
p6 LIKE prodh-zzprodh6,
t6 LIKE t179t-vtext,
p7 LIKE prodh-zzprodh7,
t7 LIKE t179t-vtext,
p8 LIKE prodh-zzprodh8,
t8 LIKE t179t-vtext,
p9 LIKE prodh-zzprodh9,
t9 LIKE t179t-vtext,
p like t179-prodh,
END OF itab.
data : begin of gt_prodh occurs 0 .
        include structure mvke.
data: end of gt_prodh .
DATA:X(1),
      p(20),
      t(20),
      y(1),
      v_hier(20).
DATA:v_digiteski(2).
v_digiteski = 0.
data:check(1).
DATA: BEGIN OF gt_t179 OCCURS 0,
    stufe LIKE t179-stufe,
    prodh LIKE t179-prodh,
END OF gt_t179.
DATA: v_max TYPE i.
selection-screen begin of block part1 with frame title text-001.
select-options: s_vkorg for s001-vkorg,
               s_vtweg for s001-vtweg,
               s_spart for s001-spart,
               s_kunnr for s001-kunnr,
               s_matnr for s001-matnr.
selection-screen end of block part1 .
select-options:spart for vbap-spart.
concatenate spart-low '*' into b.
ranges vprodh for t179-prodh.
vprodh-sign = 'I'.
vprodh-option = 'CP'.
vprodh-low = b.
append vprodh .
clear vprodh.
start-of-selection.
read data into table imat
do 9 times.
    SELECT SINGLE prodh FROM t179 INTO v_prodh
    WHERE STUFE EQ i_svy-svy.
    IF sy-SUBRC = 0.
      IF STRLEN( v_prodh ) LE 18.
        i_stufe-stufe = i_svy-svy.
        i_stufe1-stufe = i_svy-svy.
        i_stufe1-digit = STRLEN( v_prodh ).
        i_stufe-digit = STRLEN( v_prodh ) - v_digit.
        v_digit = STRLEN( v_prodh ).
        APPEND i_stufe.
        CLEAR i_stufe.
        APPEND i_stufe1.
        CLEAR i_stufe1.
        APPEND i_stufe2.
        CLEAR i_stufe2.
      ENDIF.
    ELSE.
      EXIT.
    ENDIF.
    i_svy-svy = i_svy-svy + 1.
    APPEND i_svy.
enddo.
SORT i_stufe DESCENDING BY stufe.
LOOP AT i_stufe.
    v_max = i_stufe-stufe.
    EXIT.
ENDLOOP.
SELECT * FROM t179 INTO CORRESPONDING FIELDS OF TABLE gt_t179
where prodh eq v_prodh.
select * from s001 into corresponding fields of itab where matnr
in s_matnr.
    select single vkorg vtweg prodh from mvke into corresponding
    fields of itab where matnr = s_matnr
    and vtweg in s_vtweg
    and vkorg in s_vkorg.
    select single vtext from t179t into corresponding fields of itab
    where prodh = itab-prodh .
    append itab.
    clear itab.
endselect.
SORT i_stufe2 DESCENDING BY stufe.
LOOP at i_stufe2.
    LOOP AT gt_t179 WHERE stufe = v_max.
      clear check.
      PERFORM kontrol using gt_t179-prodh.
      CLEAR i_stufe1-digit.
      LOOP AT i_stufe1.
        if check = 'X'.
          exit.
        endif.
        do 1 times.
          read table i_stufe into i_stufe
           with key stufe = i_stufe1-stufe.
          if i_stufe-stufe > v_max.
            exit.
          endif.
          SELECT SINGLE vtext FROM T179T INTO v_hier
          WHERE spras = sy-langu
          AND prodh = gt_t179-prodh(i_stufe1-digit).
          FIELD-SYMBOLS = v_hier.
          itab-p = gt_t179-prodh.
          v_digiteski = i_stufe1-digit.
          CLEAR p.
          CLEAR t.
        enddo.
     ENDLOOP.
      ENDLOOP.
      CLEAR v_digiteski.
      if itab-p1 ne space.
        APPEND itab.
      endif.
      CLEAR itab.
      CLEAR .
    ENDLOOP.
    v_max = v_max - 1.
    if v_max = 0.
      exit.
    endif.
ENDLOOP.
data:BEGIN OF i_tt179 OCCURS 100,
    stufe like t179-stufe,
    prodh like t179-prodh,
    end of i_tt179.
*&      Form kontrol
      text
     -->X          text
form kontrol using x.
data: a(18).
CONCATENATE X '*' into a.
ranges prodh for t179-prodh.
prodh-sign = 'I'.
prodh-option = 'CP'.
prodh-low = a.
append prodh . clear prodh.
prodh-sign = 'E'.
prodh-option = 'EQ'.
prodh-low = X.
append prodh . clear prodh.
select * FROM t179
     into CORRESPONDING FIELDS OF TABLE i_tt179 WHERE prodh in prodh.
if sy-SUBRC eq 0.
    check = 'X'.
endif.
ENDFORM.                    "kontrol
Check if material was found
" clear i_lines.
" describe table result lines i_lines.
" if i_lines lt 1.
"*   Using hardcoded write here for easy upload
"    write: /
"    'No materials found.'.
"    exit.
" endif.
end-of-selection.
CLEAR ls_slis_layo.
ls_slis_layo-colwidth_optimize = 'X'.
ls_slis_layo-max_linesize      = 1023.
ls_slis_layo-get_selinfos      = 'X'.
ls_slis_layo-detail_popup      = 'X'.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
     EXPORTING
      i_program_name               = sy-repid
      i_internal_tabname           = 'ITAB'
    i_structure_name           = 'ZSKAR_ANZ'
    i_client_never_display       = 'X'
        i_inclname                   = sy-repid
        i_bypassing_buffer           = 'X'
    I_BUFFER_ACTIVE              =
      CHANGING
        ct_fieldcat                  = lt_slis_fcat[]
EXCEPTIONS
     inconsistent_interface       = 1
     program_error                = 2
     OTHERS                       = 3
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
     i_bypassing_buffer                = 'X'
I_BUFFER_ACTIVE                   = ' '
     i_callback_program                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  = 'itab'
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
     is_layout                         = ls_slis_layo
     it_fieldcat                       = lt_slis_fcat
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           = it_sort
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 160
I_SCREEN_END_LINE                 = 5
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = itab[]
   EXCEPTIONS
     program_error                     = 1
     OTHERS                            = 2
*CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
*EXPORTING
*it_fieldcat = lt_slis_fcat
*TABLES
*t_outtab = itab
*EXCEPTIONS
*program_error = 1
*OTHERS = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
break yusufc.
/code[/code]
Message was edited by: yusuf tunay çilesiz
Message was edited by: yusuf tunay çilesiz
Message was edited by: yusuf tunay çilesiz

Hi,
i don't know your real problem,
but i think this can be a mistake.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
     EXPORTING
      i_program_name               = sy-repid
data: report like sy-repid.
report = sy-repid.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = report
Regards, Dieter
the same in
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
Regards, Dieter
Message was edited by: Dieter Gröhn

Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help . regards Cindy

Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help . regards Cindy

Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Some basic printer troubleshooting steps before worrying about a printer driver:
1. Have you tried turning the printer off and back on?
2A. Is the printer attached with a cable?
     If yes, have you tried unplugging and re-plugging both ends of the printer cable?
     If that does not help, can you test the printer with another cable?
2B. If your printer is not connected to the computer with a cable, have you tried restarting your printer (assuming wireless connection)?
     Have you tried restarting your wireless router?
3. Have you tried restarting your MacBook? (Be sure to save your work first.)
4. Does the printer have ink? (Doesn't usually generate a 'communications error' though)
5. Have you updated OS X or the program you're trying to print from recently?

I am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.

i am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.

This is for Windows: http://support.apple.com/kb/TS1538

Please help me regarding error in jcManager 1.1

Hi Friends..
perhaps this question especially for bebecanu, but perhaps i hope all of you could help me too.. :)
i tried to learn how way jcManager works, so i downloaded the jcManager1.1 source..
i created new application in Netbeans 6.9, and then i copied all of files in the jcmanager.source..
i've set the libraries needed also in Netbeans, i've added the libraries of jpcsc.jar and looks-2.1.4.jar , so assume that there's no error while compile time..
but while runtime, there's message error displayed in the TextArea..
this is the message error :
Exception in thread "Thread-3" java.lang.NoClassDefFoundError: Could not initialize class com.linuxnet.jpcsc.PCSC
     at com.braicu.jcm.card.CardWorker.disconnectCard(CardWorker.java:507)
     at com.braicu.jcm.JCManager$22.construct(JCManager.java:620)
     at com.braicu.jcm.layout.MySwingWorker$2.run(MySwingWorker.java:108)
     at java.lang.Thread.run(Thread.java:619)so, how to initialize class com.linuxnet.jpcsc.PCSC in Netbeans?..
Please help me regarding this..
Thanks in advance..

Hi
You need to have jpcsc.dll (you may find it in the res folder) in your java library path.
So, all you need to do is to specify this VM argument on running:
-Djava.library.path=res
Hope it helps
Stefan

Please help me regarding the running of a sql file

Hi I downloaded one sql file from
http://www.cs.uwf.edu/~sbagui/db/practical_oracle.htm
But i am unable to run it successfully...please help me regarding this... thanking you
Edited by: SowmyRaj on Dec 24, 2009 5:24 AM

Hi vali thanks for your reply...
I am using Windows XP sp2 Os.
and Oracle database 11g ...
when executing this file the follwing error is occuring
Enter value for user_name: system
old 2: uname VARCHAR(50) := '&user_name';
new 2: uname VARCHAR(50) := 'system';
**MOBILE CODE** immediate 'drop user ' ||uname;
ERROR at line 13:
ORA-06550: line 13, column 1:
PLS-00103: Encountered the symbol "*" when expecting one of the following:
( begin case declare exit for goto if loop mod null pragma
raise return select update while with <an identifier>
<a double-quoted delimited-identifier> <a bind variable> <<
continue close current delete fetch lock insert open rollback
savepoint set sql execute commit forall merge pipe purge

Please help me regarding Secure RMI Applet Application

Hi Friends..
Currently i use Java Card 2.2.1..
I'm learning about SecureRMIDemo application that shipped with JCDK 2.2.1..
Assume that i've loaded the SecureRMIApplet.cap successfully, and i've created the Secure RMI Client using SmartCardIO..
And then i tried to do any process provided by Purse interface, such as debit, credit, setAccountNumber, etc..
But i got this error message :
java.rmi.RemoteException: Signature mismatch
     at com.sun.javacard.javax.smartcard.rmiclient.CardObjectFactory.throwError(Unknown Source)
     at com.sun.javacard.javax.smartcard.rmiclient.CardObjectFactory.throwException(Unknown Source)
     at com.sun.javacard.javax.smartcard.rmiclient.CardObjectFactory.getObject(Unknown Source)
     at com.sun.javacard.ocfrmiclientimpl.JCRemoteRefImpl.parseAPDU(Unknown Source)
     at com.sun.javacard.ocfrmiclientimpl.JCRemoteRefImpl.invoke(Unknown Source)
     at com.sun.javacard.samples.SecureRMIDemo.SecurePurseImpl_Stub.setAccountNumber(Unknown Source)
     at testRMIClient.SecureRMIClienrt.main(SecureRMIClienrt.java:27)Yes, i know that, that error message required to ensure that the application run in the Security context..
But for me, who just getting started to Java Card Security, it becomes a problem... :(
The message error tells that the Signature is mismatch..
And then how to set this Signature before do any process in the SecureRMI Client application?..
Since there's no way to set the Signature through Purse interface..
Please help me regarding this..
Thanks in advance..

Thanks Shane for your reply..
does it mean i've to send APDU?.. Because in the MySecurityService class code there's method that checks the CLA and INS byte..
Or can i send an APDU Object while we're using the Java Card RMI Application mode?..
Actually, in my opinion, i would say that if we use RMI mode, we don't need APDU Command anymore..
Please correct me if i'm wrong..
Thanks in advance..

Please Help me with my Custom Event

I am new in java, please help me about my custom event
I have a simple source code about custom event but it doesn't work like I want. This code generate result :
start
end
but I want result :
start
my custom event (from aaa method)
end
Thank you
package TestBean;
class MyEvent extends java.util.EventObject {
public MyEvent(Object source) {
super(source);
interface MyEventListener extends java.util.EventListener {
public void myEventOccurred(MyEvent evt);
class MyClass {
protected javax.swing.event.EventListenerList listenerList =
new javax.swing.event.EventListenerList();
public void addMyEventListener(MyEventListener listener) {
listenerList.add(MyEventListener.class, listener);
public void removeMyEventListener(MyEventListener listener) {
listenerList.remove(MyEventListener.class, listener);
protected void fireMyEvent(MyEvent evt) {
Object[] listeners = listenerList.getListenerList();
for (int i=0; i<listeners.length; i+=2) {
if (listeners==MyEventListener.class) {
((MyEventListener)listeners[i+1]).myEventOccurred(evt);
public class BeanFrame extends javax.swing.JFrame {
public BeanFrame() {
initComponents();
MyClass c = new MyClass();
System.out.println("start");
c.addMyEventListener(new MyEventListener()
public void myEventOccurred(MyEvent evt)
aaa(evt);
System.out.println("end");
private void aaa(MyEvent evt) {
System.out.println("my custom event");
// <editor-fold defaultstate="collapsed" desc=" Generated Code ">
private void initComponents() {
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
javax.swing.GroupLayout layout = new javax.swing.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGap(0, 400, Short.MAX_VALUE)
layout.setVerticalGroup(
layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGap(0, 300, Short.MAX_VALUE)
pack();
}// </editor-fold>
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new BeanFrame().setVisible(true);

package TestBean;
class MyEvent extends java.util.EventObject {
    public MyEvent(Object source) {
           super(source);
interface MyEventListener extends java.util.EventListener {
    public void myEventOccurred(MyEvent evt);
class MyClass {
    protected javax.swing.event.EventListenerList listenerList =
    new javax.swing.event.EventListenerList();
    public void addMyEventListener(MyEventListener listener) {
          listenerList.add(MyEventListener.class, listener);
    public void removeMyEventListener(MyEventListener listener) {
          listenerList.remove(MyEventListener.class, listener);
    protected void fireMyEvent(MyEvent evt) {
         Object[] listeners = listenerList.getListenerList();
         for (int i=0; i<listeners.length; i+=2) {
                if (listeners==MyEventListener.class) {
                      ((MyEventListener)listeners[i+1]).myEventOccurred(evt);
public class BeanFrame extends javax.swing.JFrame {
      public BeanFrame() {
            initComponents();
            MyClass c = new MyClass();
            System.out.println("start");
            c.addMyEventListener(new MyEventListener(){
                              public void myEventOccurred(MyEvent evt){
                                          aaa(evt);
            System.out.println("end");
      private void aaa(MyEvent evt) {
            System.out.println("my custom event");
     // ><editor-fold defaultstate="collapsed" desc=" Generated Code ">
     private void initComponents() {
           setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
       javax.swing.GroupLayout layout = new
       javax.swing.GroupLayout(getContentPane());
       getContentPane().setLayout(layout);
       layout.setHorizontalGroup(
       layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
       .addGap(0, 400, Short.MAX_VALUE)
       layout.setVerticalGroup(
       layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGap(0, 300, Short.MAX_VALUE)
      pack();
}// </editor-fold>
public static void main(String args[]) {
         java.awt.EventQueue.invokeLater(new Runnable() {
         public void run() {
                  new BeanFrame().setVisible(true);
}just enclosed it with the code tags.

My Macbook Air broke. Please help me, Russian Apple Customer Support don't want help me. I'm in despair.

My Macbook Air broke. Please help me, Russian Apple Customer Support don't want help me. I'm in despair.
Hi, I bought my MacBook Air in your store. In the summer of 2012. My mac is included in the program MacBook Air Flash Storage Drive Replacement Program. I live in Russia. I called the Russian support Apple. They told me to bring mac to an authorized service center. An authorized service center I was told to wait 45 days of the new flash storage drive. It's very long for me. I can `t wait long. I work on a Mac. I do not have another computer. Russian support Аpple does not want to help me. Can you help me? Serial number my MacBook Air : c0*******rvc
<Personal Information Edited by Host>

Leaving you without a computer for 45 days isn't acceptable. Call Apple and ask for a loaner or replacement. Some people have been receiving them.
If you still have no luck, then consider getting a USB 3.0 HDD and installing and running OS X on it until the replacement part is in.

Please help me with portfolio.I am new in graphic design.I need portfolio done immediately soon as possible otherwise my design advisor will not let me register for fall. I need 15 or 10 artworks to show.Please help me

Please help me with portfolio.I am new in graphic design.I need portfolio done immediately soon as possible otherwise my design advisor will not let me register for fall. I need 15 or 10 artworks to show.Please help me.

Farooq,
If you look at the first one, you should be able to align quite easily as follows, View>Smart Guides being your friends:
1a) ClickDrag the top flower with the Selection Tool (black arrow) so it is clear of the pointy part;
1b) Click an empty spot on the Artboard to deselect, then ClickDrag the top flower by its bottom Anchor Point (Smart Guides say anchor when you are close enough to grab it) down to snap to the top Anchor Point on the pointy part (Smart Guides say anchor when you are close enough);
1c) Do the same for the boroom flower.
If you look at the third one, to get the triangles and the hexagon sized and aligned precisely, you may, creating them with stroke and no fill:
3a) Click with the Polygon Tool and select a suitable/chosen Radius and 6 Sides, then Object>Transform>Rotate by 30 degrees (or use the Rotate option in the Transform palette), you may Object>Transform>Reset Bounding Box to have it look nicer;
3b) Click with the Polygon Tool and select the same Radius and 3 sides, then deselect and ClickDrag the top Anchor Point to snap to the top Anchor Point of the hexagon;
3c) Object>Transform>Rotate by 180 degrees clicking Copy, deselect, and ClickDrag the bottom Anchor Point to snap to the bottomAnchor Point of the hexagon;
3d) Select all and Ctrl/Cmd+G to Group (for alignment purposes, you will know why if you try without grouping, see below).
To create full symmetry, you may use circles rather than almost circular ellipses; you may:
3d) Click with the Ellipse Tool and select a suitable/chosen Width = height;
3e) Object>Transform>Move a copy vertically by the Height (= Width) twice (or you may Ctrl/Cmd+D to repeat), to get three circles over one another with no gaps;
3f) Select the topmost and bottommost ones and Object>Transform>Rotate a copy by 120 degrees twice, to have all the seven circles precisley touching one another; you may Group them, but it is not necessary.
To have everything aligned, just:
3g) Select everything and click Vertical Align Center and Horizontal Align Center in the Align palette; you may click the pointy group or the circles ojnce more before aligning if you want to keep it in place (that will make it the key object that the other set is aligned to).
These ways may also help you further.
Edit: About half an hour after midnight here. High time to attend to other duties, before the sun is up.

Please help me to visible the create event menu in workflow administrator.

Hi All,
please help me to visible the create event menu in workflow administrator.
(select workflow administrators responsibility navigate to administrator workflow -->
Business events-->events-->here i am seeing only search options,but i required create event,subscriptions.... )
Regards
Gopinath

Hi,
please help me to visible the create event menu in workflow administrator.
(select workflow administrators responsibility navigate to administrator workflow -->
Business events-->events-->here i am seeing only search options,but i required create event,subscriptions.... )You should find "Create Event" and "Create Events Groups" buttons in the same page under "Results : No Search Conducted".
Regards,
Hussein

Please help me regarding RMI Applet Application?

Hi Friends..
Please help me describe the work-flow of RMI Applet Application..
Currently, i use Java Card 2.2.1.. In the package Java Card 2.2.1 there's an example of RMI Applet Application..
in that RMI Applet Application there are 3 Java files, namely :
1. public interface Purse extends Remote
2. public class PurseImpl extends CardRemoteObject implements Purse
3. public class PurseApplet extends Applet
There's also RMIDemo.opt file.. and in the contain of that RMIDemo.opt file, there's only PurseApplet class that would be converted to CAP file..
so, what is the use of Purse Interface and PurseImp class?.. and how to use both of them?..
Please help me regarding this..
Thanks in advance..

Hi Shane, thanks for clarifying that.. :).. Ok. i'm going to learn hard..
Sorry, i've a doubt regarding this thread ..
In that thread, that's mentioned purse.jar containing :
- Purse.class
- PurseApplet.class
- PurseImpl_Stub.class
- PurseImpl.class
The only class that i'm wondering is PurseImpl_Stub.class..
Why this class required, whereas i don't found it in the RMIDemo application that shipped with JCDK 2.2.1, and JCDK 2.2.2 as well..
I've tried to create other Java Card RMI Application, but it requires the "Stub" class..
Here's the error message :
java.rmi.StubNotFoundException: com.latihan.rmi.DataMahasiswaImpl_Stub
     at com.sun.javacard.ocfrmiclientimpl.JCCardObjectFactory.getRemoteObject(Unknown Source)
     at com.sun.javacard.javax.smartcard.rmiclient.CardObjectFactory.getObject(Unknown Source)
     at com.sun.javacard.javax.smartcard.rmiclient.JavaCardRMIConnect.getInitialReference(Unknown Source)
     at testRMIClient.DataMahasiswaClient.main(DataMahasiswaClient.java:43)How to create and what's the contain of that "Stub" class?..
Can i know the source code of PurseImpl_Stub.java file?..
Thanks in advance..
Edited by: Leonardo_Carreira on Apr 13, 2010 8:27 PM

HT1688 Can you please help me. I purchased the new Apple I 4s phone from AT&T. I bought it out right. NO CONTRACT!! I paid almost $1000.00 for it. I then, had it enrolled it in my company's ATT service plan. They paid the bill for my service. Since, I ha

Can you please help me. I purchased the new Apple I 4s phone from AT&T. I bought it out right. NO CONTRACT!! I paid almost $1000.00 for it. I then, had it enrolled it in my company's ATT service plan. They paid the bill for my service. Since, I have left the company. I have retained, and assumed financial responsibility for the phone, and the phone number with AT&T. The same day I assumed ifinancial responsibility, I had the phone number ported to a new service provider. ( Straight Talk ) After doing so, my phone worked fine. (as far as cellular service) NO DATA Service !!!! I have been on the phone with AT&T, Straight Talk, and Apple, FOR HOURS over TWO days!!! Trying to get this problem resolved. All I need to do, is change my APN settings (access point name ) settings. Its my phone!!! Why does any body have this APN menu locked from me??? I've been on the phone for two days between, AT&T, Straight Talk, and Apple products technical support teams. Everybody points the finger at the next guy!! What can I do to get the phone, that I paid for, work for more than just a phone, and a paper weigh?
PLEASE HELP ME!!!!!
Jason
Sent from my iPhone
<Email Edited by Host>

Wow... you seriously over paid for an iPhone.
That probably explains why you have/had no clue you were purchasing a locked device and think it's an Apple problem to get it unlocked.

Please help me regarding implemenatation of plsql webservices

hello every one,
My name is anil, I am working on the topic "building pl/sql web services". I successfully deployed my pl/sql function. But i got an error while invoking the function from a web service.
my error is
08/04/22 10:40:23 javax.servlet.ServletException: Cannot generate Class: java.lang.NoClassDefFoundError: com/sun/tools/javac/M
ain
Exception in thread "main"
08/04/22 10:40:23 at oracle.j2ee.ws.RpcWebService.generateWrapperClass(RpcWebService.java:569)
08/04/22 10:40:23 at oracle.j2ee.ws.RpcWebService.generate(RpcWebService.java:467)
08/04/22 10:40:23 at oracle.j2ee.ws.RpcWebService.getWrapper(RpcWebService.java:614)
08/04/22 10:40:23 at oracle.j2ee.ws.RpcWebService.doGetRequest(RpcWebService.java:725)
08/04/22 10:40:23 at oracle.j2ee.ws.BaseWebService.doGet(BaseWebService.java:1199)
08/04/22 10:40:23 at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
08/04/22 10:40:23 at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
08/04/22 10:40:23 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:691)
08/04/22 10:40:23 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370
08/04/22 10:40:23 at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
08/04/22 10:40:23 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
08/04/22 10:40:23 at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
08/04/22 10:40:23 at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
08/04/22 10:40:23 at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
08/04/22 10:40:23 at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
08/04/22 10:40:23 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.ja
va:303)
08/04/22 10:40:23 at java.lang.Thread.run(Unknown Source)
please help me

SowmyRaj wrote:
But i am unable to run it successfully...please help me regarding this... No wonder. Script is full of entries:
**MOBILE CODE**Modify script:
1. Change:
**MOBILE CODE** immediateto:
execute immediate2. Change:
**MOBILE CODE**to:
end ifRun the script. If you will run it second time, change:
u_exist PLS_INTEGER;
t_exist PLS_INTEGER;
ts_exist PLS_INTEGER;
ss_exist PLS_INTEGER;to:
u_exist PLS_INTEGER := 1;
t_exist PLS_INTEGER := 1;
ts_exist PLS_INTEGER := 1;
ss_exist PLS_INTEGER := 1;This way existing objects will be dropped before recreating them.
SY.

Please help me regarding VAR customer create new message in work center

Similar Messages

Maybe you are looking for