Please help me set my Camera correct
Hi
What setting will give possibly result ?
It might go for broad-casting (PAL 25fps)
I'll use FinalCut (6) for editing.
Camera to be set as:
50i 24M(FX)
50i 17M(FH)
50p 28M(PS)
25p 24M(FX)
25p 17M(FH)
Yours Bengt W
interlaced and progressive (i and p) have different looks. p is more film-like although there are many things that go in to creating a "film" look. I'm assuming the 50 frame rates are for shooting slow motion. 50i may indicate 50 fields per second rather than 50 frames per second so that is probably just 25 interlaced frames per second. What camera are you shooting with? I think the M setting indicates the data rate so in general, the higher the data rate, the more info and better quality. If I'm wrong on any of this, hopefully someone will speak up. You might want to check the camera manual. Manuals often explain the pros and cons of different shooting formats. You may also have issues with different formats compatabilities with fcp6. Testing is always a good idea.
Similar Messages
-
I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.
Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :) -
Will someone please help me set-up Acrobat to send a PDF via webmail? Acrobat returns a message "Server Connection Error .... Port 143 unavailable"
Are you using a Microsoft or Apache web server? If so, you can submit to a server-side script, which will bypass web mail and client-side email software such as OUTLOOK.
For examples:
http://www.nk-inc.com/software/pdfemail.net/examples/ -
Please help to set the time zone in a porper way
Dear Folks please help to set the time zone in a porper way
select sessiontimezone from dual;
Database: Oracle 11.2.0.2
Operating system: AIX 5.3
SESSIONTIMEZONE
+00:00
SQL> select systimestamp from dual;
SYSTIMESTAMP
06-NOV-12 04.21.07.438426 AM +00:00
SQL> select dbtimezone from dual;
DBTIME
+00:00
SQL> Select DBMS_SCHEDULER.get_sys_time_zone_name from dual;
GET_SYS_TIME_ZONE_NAME
Asia/Kuala_Lumpur
By looking Doc ID: Note:149120.1 in Metalink:
ALTER DATABASE <my db name> SET TIME_ZONE = 'Asia/Kuala_Lumpur'
or
ALTER DATABASE <my db name> SET TIME_ZONE = '+08:00'
For reflecting the change I refreshed the db by shutdown and restart.
but still the returning no timezone value for user schema, please help how to set the time zone in a proper way?SQL> conn sys/sys as sysdba
Connected.
DBNAME
db
SQL> select u.name || '.' || o.name || '.' || c.name "Col TSLTZ"
2 from sys.obj$ o, sys.col$ c, sys.user$ u
3 where c.type# = 231
4 and o.obj# = c.obj#
5 and u.user# = o.owner#;
no rows selected
SQL> select DBTIMEZONE from dual;
DBTIME
+00:00
SQL> alter database set time_zone='Asia/Kuala_Lumpur';
Database altered.
SQL> select DBTIMEZONE from dual;
DBTIME
+00:00
SQL> startup force;
ORACLE instance started.
Total System Global Area 426852352 bytes
Fixed Size 1375060 bytes
Variable Size 260048044 bytes
Database Buffers 159383552 bytes
Redo Buffers 6045696 bytes
Database mounted.
Database opened.
SQL> select DBTIMEZONE from dual;
DBTIMEZONE
Asia/Kuala_LumpurRefer:
Re: how to check db time zone
Edited by: Ora on 5 Nov, 2012 11:36 PM -
My mac camera does not work ! please help i need my camera for an interview !
my mac camera does not work ! please help i need my camera for an interview !
CLICKY CLICK---> http://support.apple.com/kb/HT2090 How to Troubleshoot iSight
-
Please help me set up flash player on my macbook
please help me set up flash player. i have downoaded and installed it 10x. even had a professional do it. nothing works. i have a macbook pro 10.7.5
run the uninstaller first: http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
then manually dl and install fp from the link on this page: http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Known_i ssues
Progress bar hangs during download / Unable to connect to server / Unable to download metafile
Reason: The Flash Player installer sometimes has trouble working in some firewall proxy server environments.
Workaround: Download the Adobe Flash Player installer directly by clicking one of the following links.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers) -
How do i change my iPad language because I went to general and international and changed the language to English, but most things are still in Spanish. Please help me set everything to English
To clarify Settings > General > International > Language is set to English?
and Settings > General > International > Keyboard > includes the English keyboard?
When you are on your Home screen is Settings called 'Settings' in english?
what are the things that are still in Spanish? -
Please help me set up a WDS with relay
I am attempting to create a WDS with 5 Airport Express units with the main station being connected to a wired router (will this slow things down?) I used the Airport Utility to designate the main station in WDS and then scanned for another station that I set up as remote. Everything works fines at this point.
Next I selected another station as a relay and then selected the main station and the other ones which I want to act as remotes from the relay (not sure if I should include the remote that I already have set up off the main station as also a remote to the relay) But regardless this is when I get the message that I should not have DHCP and NAT enabled and that I should deselect the "Distribute IP Addresses" option which didn't come up when I set up the first remote from the main. I tried leaving these options both on or off but either way the relay didn't connect to the main however the remotes connected the the relay. (I have double checked that I have the main station for the relay selected properly.
I was confused that you are to enter a network name and password for the relay because I thought it would it would automatically be changed to the main networks names and password. (Maybe it would have if I had it working right) Since it didn't I attempted entering in the main network name and password but it didn't help. A relay in WDS doesn't create another network name correct? Computers can also connect to a relay? I also thought it was strange that when I was scanning for the stations that the MAC address would come up but the name would be listed as "unknown" but am not sure if that is a big deal. One other issue I was experiencing was that my PMG5 couldn't connect to another station after already being connected to one for some unkown reason but luckily I have a PB to work with that had no trouble accessing the different stations to then attempt to configure as I have described. I also wonder if it woud be better to kepp the PMG5 wired from the wired router and then also connect the Main Airport Express to it. If anyone can provide any advice it will be greatly appreciated! Thanks a million!Sorry, would love to go into fine detail about this but I'm a little tired and frustrated at this point.
I'm basically having the same problem as robosapien. I just want to create this simple configuration :-
AirPort Extreme Base Station (main) <--> AirPort Express (relay) <--> Airport Express (remote)
In following various instruction manuals, common sense and logical experimentation I'm simply failing to get it to work. I've assigned MAC addresses, configured manually and with the set-up assistants but I'm begining to feel that the "multiple" configuration adjustments that happen when setting up a WDS network are somehow cancelling things out.
Here are a few things that are confusing me.
1) It appears I have set things up correctly in a single room environment with MAC addresses in the "right" boxes, main/relay/remote WDS settings assigned correctly and green lights on the 2 Express units. I then move Express 1 (relay) to another room and retain green light status. I then move Express 2 (remote) to it's intended location - another building, but with only 2 walls and 25ft between Express's - but I only get the flashing orange LED. I return to Express 1 and that too is flashing orange, as if Express 2 has messed up it's function when it was powered up. The network has fallen down.
2) When experimenting with configuring each station I don't understand why a single remote base station is in a mode classed as "Create a Wireless Network" as opposed to "Join an existing Wireless Network", but that second option disables access to WDS settings, so I'll hazard a guess that is used for bridging.
I'm sure it's probably all about the order in which you set up the base stations
and which base station holds which MAC addresses, but I've exhausted the logical combinations.
Any help would be greatly appreciated.
Simon
PowerMac G4 Dual 1.42 Mac OS X (10.4.7) -
Can you please help with iPhone 4 camera?
I am running ios 7 and have been for a few months with no problems. When I went to take a photo yesterday, I clicked on the Camera icon and a black screen with a white circle came on. I tapped the white circle (even though that's not usually what I see when I want to take a picture), and it VERY briefly clicked on but way before I could think to snap a picture, it clicked me out of Camera and back to the main screen with icons.
PLEASE help me figure this out! I use my phone, like many of us, for pictures almost every day.
Thanks in advance....BethHello, What I do is I open Lightroom 5.3 and go to 'Help' and go to 'Check for Updates' then click on it which brings up Lightroom Update Available (see image below) and as soon as I click 'Download' I get the error as shown above (in the other image). Hope this helps
-
Please Help with Setting Up an iCloud Account with a PC
Friends,
I'm using a IBM ThinkPad W510 with Mozilla Firefox as my search engine, Thunderbird as my email program and I recently purchased an iPad 3 and own an iPod. I am very interested in using iCloud but short of finding an IT Engineer, I am in dire need of step by step help on how to set up iCloud on these three pieces of hardware. I'm willing to pay for the information if needed but as it looks now, after spending three nights and about 9 hours I don't think it's possible. My email address is [email protected] and I am unclear as to if I have to use .me or whatever Apples email options are. I really need help and it's stuff like this that really keep 30 year PC users from jumping the fence and going totally Apple which I may consider in the future after seeing Windows 8 in the fall. Please help me out.
With Great Respect and Needs,
EdiCloud Help
Creating an iCloud account- Frequently Asked Questions
Apple IDs and iCloud
iCloud: What version of Windows software am I using for iCloud? -
8330 Curve. Please help me set up to sync with Google Calendar.
Please help. I have a new Curve. I spent forever getting Google Calendar loaded up with my LIFE, and now I cannot seem to get the two to sync consistently. Would someone please simplify this for me (talk to me like I am 8) and rescue me from the panic I am in?
I need Google Calendar to sync (both ways) with my BB. Since I can only find a way to set two different sounding alarms on the BB, I also need to be able to have Google Calendar send e-mail alerts (because I can use a different alarm tone) and SMS (another tone) for some events.
I had some of this working, and all of a sudden, some events are out of "sync" by a day. (ie. it says they are set for a Thursday, recurrring ,but they show up on Wednesday on Google). Also, many events are not syncing from Google Cal to BB.
Following some of the information I read here, I re-set my Calendar Sync, re-loaded Google Sync. I now have 3 entries in my calendar, not 823. It would appear that most of what I need still exists in my desktop Google Calendar. Please help me get these appointments back on to my BB!!
Thank you.
bFirst, you need a Google account. If you don't have one, get it here:
https://www.google.com/accounts/ManageAccount
Second, get Google sync here:
http://www.google.com/mobile/blackberry/sync.html
Third, read about it here:
http://www.google.com/support/mobile/bin/topic.py?topic=13585
Jerry -
ATTN: Puigchild - Please help on muting 808 camera...
Please help on allowing USA customers to mute camera sounds on the 808.
I was on the phone with Nokia tech support and they said its not possible.
What attracted me to the 808 besides the image quality was the fact that I saw a review on youtube where it was demonstrated that camera sounds could be muted from the camera settings page.
Every time I hear the sound for focus confirmation and shutter release, I get upset with what would otherwise be a very useful tool for me. I can't even bear to use the self-timer with its "tick tock" sound.
I don't want to be forced into having the phone hacked since the warranty is important to me.
I'm begging Nokia to please give the user the choice to mute these sounds. Please let the user decide unless the 808 can't be legally sold in a country unless muting is disabled.ekstamC wrote:
Anyone know where I find the old video and picture editor for the N8 and can I install it on my 808 PureView which have no editor worth mentioned?
Whilst still possible to install original Photo & Video Editors it is beyond the remit of this manufacturer's sponsored forum as to do so would negate existing platform security so please do not ask for assistance here:
Happy to have helped forum with a Support Ratio = 42.5 -
i have a kodak easyshare m340 and yesterday my camera was working at the beach andthen all of a sudden i tried to turn it on. It turned on then off real fast. It wont let me turn it on, and my birthday is soon so i really need it fixed. Please help
Solved!
Go to Solution.There isn't going to just be some magic fix, you'll most likely need to take your camera in and have it serviced.
The only thing I can possibly think of trying is to take the batteries out, leave it sit for a few minutes, and try fresh ones.
If you have Black Tie protection on it, just take it into a Best Buy and have it sent off to be fixed, or if it's still under the manufacturer's warranty. If not, you're most likely better off just buying a new one since those sell brand new for ~$70 and the repair cost would probably easily surpass that.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun. -
Please help. Setting up a Library on external HD and reconfigure Apple TV
Please help. I have a macbook air and recently purchased the apple tv. I am looking for help on 2 things.
1- how do I create a new iTunes library on my external HD so that the movies I have purchased from iTunes can be stored there instead of on the hd of my MBA and I can free up the space on the MBA?
2- I have read on a few of the posts that there is a way to reconfigure the Apple TV to sync with that new library (on the external HD) instead of being linked with the MBA hd. But none of them gives steps needed to get this done. Can someone please help??
Thank you!!1. On the external HD create a new empty folder call it what you will (itunes new folder), then in itunes preferences/advanced change your 'itunes music folder location' by locating and selecting the new folder. Ensure that 'keep itunes...organised' and 'copy itunes....' check boxes are checked. Close preferences and then select file/library/consolidate library from your menu bar.
This will then copy your entire media collection to the new folder, once complete you can then trash the old itunes folder which by default should be at user/music/itunes/itunes music.
2. If you follow the steps above there should be no need to reconfigure the tv, it should continue to see the library in the same way as before.
Note.
You will no longer be able to play any media on the MBA or stream any content to the tv unless your ext HDD is attached.
It is possible to keep some content on the MBA so that you can access it and play it while on the go, this is fairly easy but not quite as easy as keeping your library in one place, let us know if you want to do this. -
Please help us! How to correct this wrong!
My program throws an unexpected exception as following:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x77C015B5
Function=GetFileVersionInfoSizeW+0x224
Library=D:\WINDOWS\system32\VERSION.dll
Current Java thread:
at net.csetech.hc.icaocsr.IcaoCsr.ids_Init(Native Method)
at net.csetech.hc.icaocsr.IcaoCsr.main(IcaoCsr.java:73)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:78)
Dynamic libraries:
0x00400000 - 0x0040B000 D:\j2sdk1.4.2_08\bin\java.exe
0x7C900000 - 0x7C9B0000 D:\WINDOWS\system32\ntdll.dll
0x7C800000 - 0x7C8F4000 D:\WINDOWS\system32\kernel32.dll
0x77DD0000 - 0x77E6B000 D:\WINDOWS\system32\ADVAPI32.dll
0x77E70000 - 0x77F01000 D:\WINDOWS\system32\RPCRT4.dll
0x77C10000 - 0x77C68000 D:\WINDOWS\system32\MSVCRT.dll
0x08000000 - 0x08138000 D:\j2sdk1.4.2_08\jre\bin\client\jvm.dll
0x77D40000 - 0x77DD0000 D:\WINDOWS\system32\USER32.dll
0x77F10000 - 0x77F56000 D:\WINDOWS\system32\GDI32.dll
0x76B40000 - 0x76B6D000 D:\WINDOWS\system32\WINMM.dll
0x10000000 - 0x10007000 D:\j2sdk1.4.2_08\jre\bin\hpi.dll
0x00390000 - 0x0039E000 D:\j2sdk1.4.2_08\jre\bin\verify.dll
0x003B0000 - 0x003C9000 D:\j2sdk1.4.2_08\jre\bin\java.dll
0x003D0000 - 0x003DE000 D:\j2sdk1.4.2_08\jre\bin\zip.dll
0x00970000 - 0x00977000 D:\IntelliJ-IDEA-4.5\bin\breakgen.dll
0x02DC0000 - 0x02DCF000 D:\j2sdk1.4.2_08\jre\bin\net.dll
0x71AB0000 - 0x71AC7000 D:\WINDOWS\system32\WS2_32.dll
0x71AA0000 - 0x71AA8000 D:\WINDOWS\system32\WS2HELP.dll
0x02E10000 - 0x02E17000 D:\VSS\icaocsr\jicaocsr.dll
0x02E20000 - 0x02EBA000 D:\VSS\icaocsr\csrsdk.dll
0x02EC0000 - 0x02F58000 D:\VSS\icaocsr\ID_Star.dll
0x02F60000 - 0x02FC5000 D:\VSS\icaocsr\CamConj.dll
0x77C00000 - 0x77C08000 D:\WINDOWS\system32\VERSION.dll
0x02FD0000 - 0x0301E000 D:\VSS\icaocsr\FireCamJ.dll
0x77F60000 - 0x77FD6000 D:\WINDOWS\system32\SHLWAPI.dll
0x74AD0000 - 0x74AD8000 D:\WINDOWS\system32\POWRPROF.dll
0x77920000 - 0x77A13000 D:\WINDOWS\system32\SETUPAPI.dll
0x76080000 - 0x760E5000 D:\WINDOWS\system32\MSVCP60.dll
0x73DD0000 - 0x73ECE000 D:\WINDOWS\system32\MFC42.DLL
0x5FD00000 - 0x5FD0D000 D:\WINDOWS\system32\MFC42LOC.DLL
0x76C90000 - 0x76CB8000 D:\WINDOWS\system32\imagehlp.dll
0x59A60000 - 0x59B01000 D:\WINDOWS\system32\DBGHELP.dll
0x71A50000 - 0x71A8F000 D:\WINDOWS\system32\mswsock.dll
0x662B0000 - 0x66308000 D:\WINDOWS\system32\hnetcfg.dll
0x71A90000 - 0x71A98000 D:\WINDOWS\System32\wshtcpip.dll
0x76BF0000 - 0x76BFB000 D:\WINDOWS\system32\PSAPI.DLL
Heap at VM Abort:
Heap
def new generation total 576K, used 287K [0x10010000, 0x100b0000, 0x104f0000)
eden space 512K, 56% used [0x10010000, 0x10057d38, 0x10090000)
from space 64K, 0% used [0x10090000, 0x10090000, 0x100a0000)
to space 64K, 0% used [0x100a0000, 0x100a0000, 0x100b0000)
tenured generation total 1408K, used 0K [0x104f0000, 0x10650000, 0x14010000)
the space 1408K, 0% used [0x104f0000, 0x104f0000, 0x104f0200, 0x10650000)
compacting perm gen total 4096K, used 1245K [0x14010000, 0x14410000, 0x18010000)
the space 4096K, 30% used [0x14010000, 0x141474a0, 0x14147600, 0x14410000)
Local Time = Mon Oct 31 09:46:57 2005
Elapsed Time = 0
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
Please help and explain this mistake for me. Thank for fromt reply.Dir sir,
Our program use Native Method in Java with some code in C++ as bellow:
* Class: net_csetech_hc_icaocsr_IcaoCsr
* Method: ids_Init
* Signature: ()I
JNIEXPORT jint JNICALL Java_net_csetech_hc_icaocsr_IcaoCsr_ids_1Init
(JNIEnv *env, jobject obj) {
if(CSRInit(0) != CSR_OK)
return 1;
else
CSR_DEVICE_STATUS st;
char revision[STR_SIZE];
if(CSRGetStatus(revision,&st) != CSR_OK)
return 1;
else
CSR_DEVICE_TYPE tp;
if(CSRGetDeviceType(&tp) != CSR_OK)
return 1;
if(CSRSetDeviceCallback(CSR_CALLBACK_WINDOW,
GetActiveWindow(), NULL, NULL, 0) != CSR_OK)
return 1;
return 0;
* Class: net_csetech_hc_icaocsr_IcaoCsr
* Method: ids_ReadMRZonICAOdocument
* Signature: (Ljava/lang/String;)I
JNIEXPORT jint JNICALL Java_net_csetech_hc_icaocsr_IcaoCsr_ids_1ReadMRZonICAOdocument
(JNIEnv *env, jobject obj, jstring tiffImage) {
const char *image = env->GetStringUTFChars(tiffImage, 0);
CSRHANDLE img;
CSRImageParameter para;
CSRSetDefaultImageParameter(¶);
para.ImageType = CSR_RAWGRAY;
para.LightType = CSR_IR;
para.ExposureTime = 50;
para.UseShading = FALSE;
if(CSRCreateImage(¶,&img) != CSR_OK)
return 1;
if(CSRAcquire(img) != CSR_OK)
CSRFreeImage(img);
return 1;
BYTE* binimg;
DWORD binimglength;
if(CSRBinarizeImage(img,&binimg,&binimglength) != CSR_OK)
CSRFreeImage(img);
return 1;
CFile file(image,
CFile::modeCreate|CFile::typeBinary|CFile::modeWrite);
file.Write(binimg,binimglength);
jclass cls = (jclass)env->GetObjectClass(obj);
jfieldID fid;
fid = (jfieldID)env->GetFieldID(cls, "icaoLines", "[Ljava/lang/String");
BYTE *IcaoLines;
WORD Formatcheck;
UINT LinesRead;
LINE_COORDINATES *Coords;
int result = 0;
if(CSRReadIcaoDocument(binimg,binimglength,&IcaoLines,
&Coords,&Formatcheck,&LinesRead) != CSR_OK)
result = 1;
else
BYTE *pLine = IcaoLines;
jstring jIcaoLine = env->NewStringUTF("");
jobjectArray jIcaoLines = env->NewObjectArray(
LinesRead,cls,jIcaoLine);
for(UINT i=0; i<LinesRead; i++)
jIcaoLine = env->NewStringUTF((const char*) pLine);
env->SetObjectArrayElement(jIcaoLines,i,jIcaoLine);
pLine += strlen ((const char *)pLine)+1;
env->SetObjectField(obj, fid, jIcaoLines);
CSRFree((void**)&IcaoLines);
CSRFree((void**)&Coords);
CSRFreeImage(img);
return result;
* Class: net_csetech_hc_icaocsr_IcaoCsr
* Method: ids_Disconnect
* Signature: ()I
JNIEXPORT jint JNICALL Java_net_csetech_hc_icaocsr_IcaoCsr_ids_1Disconnect
(JNIEnv *env, jobject obj) {
if (CSRCleanup()!=CSR_OK)
return 1;
else
return 0;
And our program is running on Windows XP Professional.
Our program has problem only with Init Function and we try to increase VM memory but our program is still failure.
If we don't use java environment, but using Visual C++ 6.0, our program has no problem.
However, we must process more complex.
Thank for Reply.
Regards.
Maybe you are looking for
-
Warning [deprecation] setStatus(int,javax.lang.String)
warning [deprecation] setStatus(int,javax.lang.String) in HttpServletResponseWrapper can I find a jee.jar to remplace j2ee.jar to take the resolution of this problem
-
Can text created in Pr Titler be sent from a Pr Timeline to an Ae comp via Dynamic Link in the upcoming version? http://forums.adobe.com/message/5274695#5274695
-
My apps keep crashing Why?
-
Last week I had problems with my late model 2009 MacBook Pro beach balling while I was writing a paper in Pages. Nothing else was open. I restarted the computer only to have the same problem. When I restarted again I got the grey screen with a questi
-
is it possible that apps built for the iPad (specifically iWork for iPad, and iBooks, to name a few) will be updated to support the iPhone and iPod Touch?