Please Help Me Slow Down My Compter

Lately my laptop appears to have become over-sensitive and reactive to my slightest move, particularly when I most need it not to.
My system is an HP G62 Notebook PC (G62-225NR), Pentium Dual-Core CPU (T4500) running at 2.30 GHz, 8 GB RAM, 64-bit Windows 7 OS.
My complaints are:
Single mouse clicks become double, triple, or even quadruple clicks.
I have tried going into Control Panel > Mouse > Double Click Speed and repeatedly changed the slider from fastest to slowest and vice versa without satisfaction.
One must click on a check box many, many times before my on or off choice will finally stick.
When trying to simply move a window by dragging it to a new location the window will suddenly jump up to take up the entire screen, even when I don't want it to.
And, when I make a selection of text using my mouse (as in preparation to move, copy, or cut it) the selection immediately goes away the instant I raise my finger off the left button and is lost. It is NOT copied to the clipboard. In order get get a selection of text to be copied to the clipboard I must hold down an arrow key with one finger while holding down a shift key to make the selection again.
These problems are driving me nuts. What can I do to better bring my computer under control?

Hi Tim,
This issue can be caused by the Touchpad sensitivity,
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
Adjust touch sensitivity of touchpad using the above link that should help you fix the issue, and also check the
drag option to resolve the second issue.
The above link will help you how to adjust the sensitivity of the touchpad. its only for reference.
if it does not work even after adjusting the sensitivity. you may try reinstalling the driver for the touchpad.
from the below link.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-87233-1&cc=us&dlc=en&lc=en&...=
If the above solution helps you to resolve the issue please click on kudos.
I work for HP

Similar Messages

PLEASE HELP! SLOW SPEED FOR 5 WEEKS!

Hey all, i've come here as a last resort as im sick of my slow infinity speed and sick to death with bt customer service which does not exist!
Since before christmas my bt infinity package 1 38down/10up has been playing up after 12 midnight! usually after this time my speed would go down from 37download to around 0.5/0.1 soo low that i can't load a web page. Ive tried for weeks contacting bt which takes me to the offshore call centre where iv'e been fobbed of that an engineer is investigating an issue at the exchange or that the issue will be fixed in either 24, 36 or 48 hours numerous times to which it has not.
This last week my internet speed has dropped during the day time where before in the day it was a solid 37down and 10 up it now goes down to 10 meg and now its gone down to 0.1 meg. It went down to 0.1 meg today at around 6.30pm.
These are a list of stats below: Im at my wits end and i just want my broadband fixed! I beg Please someone help me!
1. Product name:
BT Home Hub
2. Serial number:
+068543+NQ41012931
3. Firmware version:
Software version 4.7.5.1.83.8.204 (Type A) Last updated 15/01/15
4. Board version:
BT Hub 5A
5. DSL uptime:
0 days, 00:07:34
6. Data rate:
9999 / 39993
7. Maximum data rate:
36556 / 97131
8. Noise margin:
30.5 / 22.7
9. Line attenuation:
13.5 / 12.8
10. Signal attenuation:
13.7 / 12.8
11. Data sent/received:
0.2 MB / 0.1 MB
12. Broadband username:
[email protected]
13. BT Wi-fi:
Yes
14. 2.4 GHz Wireless network/SSID:
BTHub5-QTSG
15. 2.4 GHz Wireless connections:
Enabled (802.11 b/g/n (up to 144 Mb/s))
16. 2.4 GHz Wireless security:
WPA2
17. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
18. 5 GHz Wireless network/SSID:
BTHub5-QTSG
19. 5 GHz Wireless connections:
Enabled (802.11 a/n/ac (up to 1300 Mb/s))
20. 5 GHz Wireless security:
WPA2
21. 5 GHz Wireless channel:
Automatic (Smart Wireless)
22. Firewall:
Default
23. MAC Address:
34:8a:ae:bb:d4:80
24. Modulation:
G.993.2 Annex B
25. Software variant:
AA
26. Boot loader:
1.0.0

Can someone please help me too! before christmas i was getting low speeds after 12 midnight, going down to 0.1 meg for over 5 weeks now ive had this problem and now in the day where i used to get a solid 37meg down im now at different times, started today at 6.30pm im going down to 0.1 meg.
BT Customer service is disgusting beyone belief, been fobbed of after 12 phone calls. Please someone help.
stats avalibe here:
1. Product name:
BT Home Hub
2. Serial number:
+068543+NQ41012931
3. Firmware version:
Software version 4.7.5.1.83.8.204 (Type A) Last updated 15/01/15
4. Board version:
BT Hub 5A
5. DSL uptime:
0 days, 00:45:18
6. Data rate:
9999 / 39993
7. Maximum data rate:
36556 / 97131
8. Noise margin:
30.5 / 22.7
9. Line attenuation:
13.5 / 12.8
10. Signal attenuation:
13.7 / 12.8
11. Data sent/received:
0.2 MB / 0.1 MB
12. Broadband username:
[email protected]
13. BT Wi-fi:
Yes
14. 2.4 GHz Wireless network/SSID:
BTHub5-QTSG
15. 2.4 GHz Wireless connections:
Enabled (802.11 b/g/n (up to 144 Mb/s))
16. 2.4 GHz Wireless security:
WPA2
17. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
18. 5 GHz Wireless network/SSID:
BTHub5-QTSG
19. 5 GHz Wireless connections:
Enabled (802.11 a/n/ac (up to 1300 Mb/s))
20. 5 GHz Wireless security:
WPA2
21. 5 GHz Wireless channel:
Automatic (Smart Wireless)
22. Firewall:
Default
23. MAC Address:
34:8a:ae:bb:d4:80
24. Modulation:
G.993.2 Annex B
25. Software variant:
AA
26. Boot loader:
1.0.0

Need some help with Slow Downs in Java3D and Servlets

Hi,
I realize that there is a separate forum for Java 3D, but I posted there, and did not get any response. This is kinda the crux of my program, so I would like to invite anybody on this forum with knowledge of Java 3D and servlets to give it a stab. Between this post and that one, there are TWENTY duke dollars up for grabs.
Thanks.
http://forum.java.sun.com/thread.jspa?threadID=603198

Let me have an educated guess.
You calculated the time elapsed before sending in a server request - and at that point you have you updated timeLastStateChange yet, which means by the time of the next calculation of time elapsed this apparent delay is not counted in, hence the slow down in animation rate.
Hope this helps~
Alex Lam S.L.

Please help: programs shut down after 60 sec's

*Please help me:* Since two weeks or so (may be, after I updated my QuickTime), every program I opened *shuts down after roughly 60 seconds*. It is not closed but it gets out of the writing mode so that I need to click on the page first before being able to continue writing again (Word, email, also this thread). If I do not always look at my page I loose words and have to retype them again. Also, with backspacing it occurs: it gets out of the enter mode. I am not aware I changed anything in the user mode of my dear power book.
Thank you for helping! rororoger

rororoger:
Welcome to Apple Discussions.
Try starting up in Safe Mode. If can do so successfully, log in, Empty Trash, Restart normally and log in.
If issue persists Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
cornelius

Please help - simple drop down box

i am very new to this - i have just opened the app for the first time - i have to create this form by tomorrow!!
I have a simple list in access - it contains 15 fields in the table - very simple. I need EVERY drop down box on the page to ref. this table to populate the list - which changes on a daily basis. There will be a total of 35 drop down boxes on the form - all pointing to the exact same CHANGING list.
PLEASE HELP!!!

You can enter the sales tax rate for each province as the export value and
then use the drop-down field directly in your calculations.
On Thu, Feb 5, 2015 at 6:06 PM, jennam90934439 <[email protected]>

Please help - table shift down on FF & Safari

Please help with my tables. Im using GL CS2 8.0.1
Objective: Would like my tables (e-commerce site) roughly 5px apart from one another.
Problem: On Firefox & Safari (MAC) there is a huge space between the cards in the browser. What is wrong with my code?
Link to test page: www.larchmontblvd.com/test.html
Thanks
Jesse

Maybe I need to be more specific...
If you look at the page, I've labeled my product cards "Title Card 1" & "Title Card 2". The problem is the spacing between Card 1 and Card 2 is different on Firefox and Safari. My goal is to have a 5 px space between the two cards.
Thanks,
Jesse

Please help - applications shutting down randomly

Evening everyone,
I've used macs for a few years now and am in the process of moving my mum from the crappy family PC over to my old iMac G5, which is just over 3 years old. The G5 is staying at home so mum can use it and I'm going back to uni on Tuesday with my MacBook.
I've set mum up with a new user account, her iPhoto library is on the computer but the iTunes library and a load of backup stuff is on a Western Digital My Book Home edition external hard drive as there's not enough room on the G5. Just as I was starting to show mum how to use the mac (at times a painful process - she's not the best at learning new computer things) the G5 went and showed me up. It's being pretty slow at opening applications and loading photos in iPhoto and it is also quitting applications without any notice or obvious cause.
The problem seems to be only in mum's user account which confuses me as it's pretty much pristine. I've scanned it with ClamxAV for viruses and found none and am in the process of scanning the external HD. One weird thing is that sometimes (but not all) after an app has shut itself down unannounced a finder window will open at a specific folder on the WD Hard Drive. It's a random photo file, originally I had mum's iPhoto library on the external drive but have sinced freed plenty of space for it on the G5 hard drive as I feel its more reliable, but there are still copies of all the photos on the hard drive. I really cant see why it sometimes links back to this one though.
Sorry, I know this is a really long post but thought I'd try and give as much info as possible - I need to get this sorted before I go back to uni on Tuesday otherwise mum won't be able to use the computer and I'm not back again until Christmas! I'd really appreciate your help and any ideas/suggestions you guys could offer. These forums have always been very useful for troubleshooting in the past, just hope my first post can work out as well!

The following may help:
Help - a program unexpectedly
Apps unexpectedly quit

Please help - extremely slow broadband/ technical ...

Hi there,
for approx 2 weeks now there has been a change in our broadband connection. We have always experienced an acceptable broadband speed, but something suddenly changed recently and has left our broadband incredibly slow.
I noticed there was a BT openworld van in our street approx two weeks ago who seemed to be there for the whole day working on the telephone pole. Since he left that afternoon we have had terrible problems with our connection.
We are no longer able to do simple things such as stream videos, download anything or even open multiple tabs when browsing - its just too slow!
I did try a speed test linked from these forums which showed that the IP profile for my line is 135kbps, download speed achieved was 116kbps and "an upstream test was not conducted on this line due to a technical issue"
I'll be totally honest and say this all means nothing to me - I just want my broadband restored to its former self and actually be able to use it properly!
HELP!

I run the initial speedtest using my ethernet cable - those hub readings were wifi connection.
Here are the speedtest results run a second time (ethernet)
download speed 0.13mbps upload speed 0.36mbps http://www.speedtest.net/result/1466971666.png
Here are the hub readings also whilst still connected via ethernet
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:23:36
Downstream:
2.188 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
7.6 dB / 18.0 dB
Line attenuation (Down/Up):
56.4 dB / 31.5 dB
Output power (Down/Up):
17.6 dBm / 12.3 dBm
FEC Events (Down/Up):
4639 / 0
CRC Events (Down/Up):
2 / 0
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
10 / 0
Error Seconds (Local/Remote):
2 / 0

Please help. Slow & dropped wifi after putting ISP's modem in bridge mode

Hi. Thanks for taking the time to read and/or possibly help out with my dilemma. I'm not very apple savvy (even though I love my husband's macbook pro which I'm typing on). Our warranty for our airport extreme is expired & this was given to us.
Our service provider here in Winnipeg Canada is Shaw Communications. We have a fast connection - Broadband 50. There are 4 of us living here - 2 kids, 2 adults & we all have cellphones, computers, ipods etc using the internet by ethernet cable or wifi. Sometimes my son has 7 friends also trying to use it. Normally we have no problems, except to me the wifi seemed slow. So I made a couple changes & wish I hadn't & now things are all screwed up.
So, this was our configuration. Our Shaw modem was SMC. It was connected by cable to my husband's Airport Extreme 4th generation base. My son's computers are connected by cable directy to the airport extreme. We used our phones & macbook wirelessly. I don't know if we were getting the wireless signal from the Shaw modem or through the airport extreme.
2 weeks ago I called Shaw to get their new Gateway pvr system. I mentioned that somtimes the internet lags for my son playing League of legends or when I'm on wifi. He said that our modem was old & they could replace it when they came to install the Gateway system. On October 26th they took the SMC modem & installed a Cisco model DCP3825.
The wireless seemed the same to me. But my son who plays League of Legends says the game's ping spikes go from 100 up to 700. Before they changed the modem, they were 50 to 90. He also kept lagging and getting disconnected from the game. We all looked online & called a computer place & learned that Shaw gives out cheap modems and the Cisco isn't a good one. So I called back Shaw & asked if they could bring back our SMC one. No they can't, but they can give us a new SMC one.
Then I searched online for a better router for gaming. This was before I understood that the airport extreme is already its own router. My husband had set it up. I didn't even know what that white box in the basement was for lol. I read online that it's a good idea to get Shaw or your ISP to bridge your modem & use your own router to get better speeds. I phoned Memory Express & Shaw & they agreed.
2 days ago I called Shaw & asked them to bridge the Cisco modem. The guy did, but didn't explain I needed to reset both routers. So we were without internet for awhile, til my son looked on his phone & figured out what to do. After bridging the Cisco modem, my son's wired connections are fine, but the wifi speeds went from 38 to 46 mbps to 3 to 11 mbps on my phone & the macbook. Sometimes the wifi drops out completely.
I phoned Shaw to ask them what to do, but they said since the airport is an apple product they can't help me. They said we probably need to change the channel & to call Shaw for help. A call to Apple costs $60!!! I couldn't believe it. So I'm asking for help here.
Is there some settings I need to change in the Airport Utility to get our wireless connections back to the way they were? Tonight I coudln't even update an app on my phone, the wifi was so slow.
Should I get them to unbridge the Cisco modem? Change from the airport extreme to a different router? I was going to add another router, but was told it's not good to have the isp modem & the airport extreme & another router on the same network. I would like to buy the Asus N66u router, but can't afford it right now. I am supposed to go buy a used router off of Kijiji tomorrow for $50. It's a Netgear N750 WDR4300 - probably 4000 for Americans. Still sells for $100 to $140 new so it's a good price. Can I use that & the extreme?
Anyway, thanks for taking the time to read my long essay & for whatever help anyone provides.
Trish

Hi. Thanks for taking the time to read and/or possibly help out with my dilemma. I'm not very apple savvy (even though I love my husband's macbook pro which I'm typing on). Our warranty for our airport extreme is expired & this was given to us.
Our service provider here in Winnipeg Canada is Shaw Communications. We have a fast connection - Broadband 50. There are 4 of us living here - 2 kids, 2 adults & we all have cellphones, computers, ipods etc using the internet by ethernet cable or wifi. Sometimes my son has 7 friends also trying to use it. Normally we have no problems, except to me the wifi seemed slow. So I made a couple changes & wish I hadn't & now things are all screwed up.
So, this was our configuration. Our Shaw modem was SMC. It was connected by cable to my husband's Airport Extreme 4th generation base. My son's computers are connected by cable directy to the airport extreme. We used our phones & macbook wirelessly. I don't know if we were getting the wireless signal from the Shaw modem or through the airport extreme.
2 weeks ago I called Shaw to get their new Gateway pvr system. I mentioned that somtimes the internet lags for my son playing League of legends or when I'm on wifi. He said that our modem was old & they could replace it when they came to install the Gateway system. On October 26th they took the SMC modem & installed a Cisco model DCP3825.
The wireless seemed the same to me. But my son who plays League of Legends says the game's ping spikes go from 100 up to 700. Before they changed the modem, they were 50 to 90. He also kept lagging and getting disconnected from the game. We all looked online & called a computer place & learned that Shaw gives out cheap modems and the Cisco isn't a good one. So I called back Shaw & asked if they could bring back our SMC one. No they can't, but they can give us a new SMC one.
Then I searched online for a better router for gaming. This was before I understood that the airport extreme is already its own router. My husband had set it up. I didn't even know what that white box in the basement was for lol. I read online that it's a good idea to get Shaw or your ISP to bridge your modem & use your own router to get better speeds. I phoned Memory Express & Shaw & they agreed.
2 days ago I called Shaw & asked them to bridge the Cisco modem. The guy did, but didn't explain I needed to reset both routers. So we were without internet for awhile, til my son looked on his phone & figured out what to do. After bridging the Cisco modem, my son's wired connections are fine, but the wifi speeds went from 38 to 46 mbps to 3 to 11 mbps on my phone & the macbook. Sometimes the wifi drops out completely.
I phoned Shaw to ask them what to do, but they said since the airport is an apple product they can't help me. They said we probably need to change the channel & to call Shaw for help. A call to Apple costs $60!!! I couldn't believe it. So I'm asking for help here.
Is there some settings I need to change in the Airport Utility to get our wireless connections back to the way they were? Tonight I coudln't even update an app on my phone, the wifi was so slow.
Should I get them to unbridge the Cisco modem? Change from the airport extreme to a different router? I was going to add another router, but was told it's not good to have the isp modem & the airport extreme & another router on the same network. I would like to buy the Asus N66u router, but can't afford it right now. I am supposed to go buy a used router off of Kijiji tomorrow for $50. It's a Netgear N750 WDR4300 - probably 4000 for Americans. Still sells for $100 to $140 new so it's a good price. Can I use that & the extreme?
Anyway, thanks for taking the time to read my long essay & for whatever help anyone provides.
Trish

Please help very slow internet

HI guys,
i have very slow wireless internet... Yesterday i have update to 8 MB. I have one PC where router is connected to. I did speedtest.net and it shows 6.4 mb which is really cool.I have MBP in my room about 15 meters away and 2 doors in way(don't know if that matters) I am connected by wireless. I have download AirGrab wifi radar and it shows only 32% signal and when i do speedtest it shows only 226kbps Then i sit next to router so the radar shows 100% signal and the speed was 1.4 MB a little bit better but still not enough. What should i do or buy to get as fast connection as possible. I feel horrible the PC is 8 years old with 6mb speed and my mac pro.. well u know. Thanks a lot Tomas

I have had problems with this for the entire time (18 months) I've had my Mac Book Pro. My desktop is noticeably faster with wireless than my MBP. Transferring music through iTunes is also slow. It will break up. Sometimes restarting my mbp will help with the speed. I'd love to find a solution.

Please Help Me Track Down 64bit Drivers (GX620)

I must be the dumbest user now that I've registered. I cannot find the 64 bit drivers for my GX620 anywhere! I did find them on some other website but the dates of the posted drivers were from 2008. I'd really like a solid link to the driver download site. Some of the link posted in this forum actually just led me to the "Choose Your Region" page.
I searched the forums as well and did not come across any links or posts that were helpful to me. Am I just really dense?! Please, any help would be greatly appreciated!
My model is the GX620-001US
-M

Quote
Some of the link posted in this forum actually just led me to the "Choose Your Region" page.
Can you post the link?
Why you use x64bit OS anyway?

Please help me break down this code

i really need help at understanding this, i put it together a while ago with some help but im really no pro at java but my tutor has asked me to give a break down of the code line by line
/* This program rolls two six-sided dice a user-specified
number of times, and prints how many times an ordered dice combination occured.
This is followed by a column stating how many times the sum of the two dice
equalled 2 through 12.
import java.util.Scanner;
public class DiceSumDistribution
     public static void main(String[] args)
          Scanner scan = new Scanner(System.in); //receive input from keyboard
          System.out.print("Enter the number of times you would like to toss two dice: "); //prompt user for input
          int timesToToss = scan.nextInt(); //read in user input
          int[] diceSum = new int[37]; //this array holds the dice roll distribution table
          int[] frequencySum = new int[13]; //this array holds how many times a dice sum occured
          int die1, die2; //integers representing the two dice
          for(int i = 0; i < timesToToss; i++) //toss two dice as many times as the user specified
               die1 = (int) (Math.random()*6+1); //assign random number (1 through 6) to dice one
               die2 = (int) (Math.random()*6+1); //assign random number (1 through 6) to dice two
               diceSum[(6*(die1-1))+die2]++; //add one to appropriate cell in distribution table
               frequencySum[die1+die2]++; //add one to appropriate sum counter
          /*the dice roll distribution table shows how many times a certain combination of dice rolls
                  and the rows represent the other dice.
          System.out.println("\n---Dice Roll Distribution Table---");
          System.out.println("\t 1\t2\t3\t4\t5\t6"); //print distribution table
          System.out.println("\t____________________________________________"); //print distribution table
          for(int i = 1; i < 37; i++) //print all 36 cells of distribution tables
               if(i%6 == 1) //if at the beginning of a table row
                    System.out.print(i/6+1 + "\t|"); //print row number
               System.out.print(diceSum[i]+ "\t"); //for each cell in a row, print its value
               if(i%6 == 0) //if at the end of a row
                    System.out.println(); //go down a line
          /*this column represents how many times a sum occured. For example, if the following output occurs
          System.out.println("\n---Dice Roll Sums---");
          for(int i=2; i<=12; i++) //for each possible dice sum
               System.out.println(i+": " + frequencySum); //print each dice sum on its own row
ii wrote this with some help a while ago but i havent done java at all since so im totaly clueless again. if someone could help i would be really greatful, thanks.

ok chill man, and i wasnt asking you to do it for me or nothign liek that.
its mostly these parts im having trouble explaining
Scanner scan = new Scanner(System.in); //receive input from keyboard
          System.out.print("Enter the number of times you would like to toss two dice: "); //prompt user for input
          int timesToToss = scan.nextInt(); //read in user input
die1 = (int) (Math.random()*6+1); //assign random number (1 through 6) to dice one
               die2 = (int) (Math.random()*6+1); //assign random number (1 through 6) to dice two
               diceSum[(6*(die1-1))+die2]++; //add one to appropriate cell in distribution table
               frequencySum[die1+die2]++; //add one to appropriate sum counter
               if(i%6 == 1) //if at the beginning of a table row
                    System.out.print(i/6+1 + "\t|"); //print row number
               System.out.print(diceSum[i]+ "\t"); //for each cell in a row, print its value
               if(i%6 == 0) //if at the end of a row
                    System.out.println(); //go down a linei know in the last one there the "if(i%6 == 1) " and "if(i%6 == 0) " effect the
"System.out.print(i/6+1 + "\t|");" in some way, but i dont really know how to explain it.
thanks

Please help, unbelievably SLOW transfer rate. No idea what to do.

I bought a 500GB TC to use with my recently replaced (and updated) Macbook Pro. I started the time machine back-up process around 7PM last night and I woke up this morning to find it's only backed up 3GB/89GB. Now that is completely unacceptable. I have it on my already existing wireless network and all I'm really using it for is the HDD.
Now I'm not too familiar external HDD with this setup but I used to own a Western Digital 500GB HDD and it would have backed up twice by now.
It is backing up via wireless as we speak and still running terribly slow.
I'm wondering if I should return it.
Message was edited by: FinalFenrir

Thanks, since my last post in this thread, TC has wirelessly backed up 16.80GB out of the total 50GB.
I just tried the ethernet route, also TC downloaded an update a few minutes ago. I disabled Airport while enabling the ethernet connection. The Network Preferences panel had a red dot for Airport (off) and a green dot for ethernet (on), and below it, it says "Self-Addressed IP". After about 2 minutes, a notice came up saying that the connection to TC was lost, the only option was "Disconnect". At this point, TC wasn't recognized anywhere on my computer.
The only way for TC to be recognized is by turning Airport back on. Then I went to Airport Utility to try to make TC work by having no Airport connection, just ethernet. This didn't work, I got an error on the DHCP settings page and the TC flashes amber. After turning Airport back on again and trying to connect the TC via ethernet to my computer, it always brings me back to the DCHP configuration page. I don't know how to properly set that up and the options are to "Skip" or "Ignore", so I clicked ignore every time, so I didn't get far with it.
So it seems the only way for TC to work (green light) is WiFi, even though it's at a snail's pace. After setting up TC again with Airport Utility, I went into Time Machine to make it recognizable by my computer. Since I only want to backup certain files, I keep the slider of Time Machine in the off position. I then accessed the TC through its icon but there's nothing there. I dragged the files I wanted to copy into TC, thinking that it'll just restart and pick up where we left of, but unfortunately this isn't the case. I'm now backing up all 50GB worth of data again, the 16.80GB that was completed at the start of this post has been LOST!!! Argrhhh!!!
Warning, DO NOT DO WHAT I DID ABOVE!!! If you're already backing up wirelessly, let it finish before trying out other methods. So far the only option I've found is WiFi, and it's horrid that I've got to start from zero again! If you couldn't tell, I'm typing this and configuring TC at the same time.
EDIT Note: While configuring TC and sometimes when it's running, the computer experiences some slowdowns. Not sure if this is to be expected but my computer was running slow while pairing up the TC, not so bad once it's running.
Message was edited by: Shandou Li

Its urgent please help me( Drop Down list box)

Hi i am writing th eBDC for VA32 t-code in that screen it is having the dropdown box for the line items i want to select the drop down list in that screen through BDC how we can do this?
Thanks in advance

yes but when we are transfering that value it is not accepting
0     Assigned by the System (Internal)
1              Delivery date too late
2     Poor quality
3              Too expensive
4     Competitor better
5     Guarantee
10            Unreasonable request
11     Cust.to receive replacement
50     Transaction is being checked
the thing is in the drop downbox these text values are coming
but how can i?

Please help me shut down imessage from the computer?

Hello,
I've recently sold my Iphone and unfortunatelly iMessage is still activated on it so I'm not receiving messages from my Iphone friends... I've tried and deleted the phone as one of my products on apples account but this didn't helped I have my apple account info and the serial number of the phone as well as the telephone number it's connected to... Thank you in advance for any help guys!
Apple account: [email protected]
Serial number: 7R1131M4A4S
Phone number: +46 761110115

Asked and answerd many times...
http://support.apple.com/kb/ts5185

Please Help Me Slow Down My Compter

Similar Messages

Maybe you are looking for