Please help me: streaming with the wrt54g

Hi
I got a wrt54g v 5. I have tried to stream web-TV at 800 kb/s from my internet connection of 3.5 Mbps. When I connect my computer straight to the modem by wire, the streaming works perfect. When I try to stream the same on the WLAN it freezes afther just some seconds. I have also tried to measure the speed with wire and wireless, and it gets the same result about 3.5 mbps. My computer is also the only one on the network.
Why does this happen? I have updated the firmware, tried different MTU values and also tried some other different things like turn of the cryptation, have the computer right beside the router and different wireless channels. It still freezes. I am starting to get frustrated.
So what can I do to get a 800 kbps stream to work with this 54 mbps wireless network??? Is it possible? Or is not the router good enought? If it don't work: ehy cant a router send a signal that is 60-70 times slower than 54 mbps?
(sorry about my english, I am norwegian)
Message Edited by sew on 05-05-200710:24 AM

54g is not really fast enough, but it can work if you use buffering(WMP or VLC), try something simple like running a batchfile which does a ping in a loop while streaming.
Try also these settings:
Beacon Interval: 50
DTIM Interval: 1
Fragmentation Threshold: 2307
RTS Threshold: 2306

Similar Messages

Please help me out with the function code of print option in module pool

please help me out with the function code of print option in module pool, along with CASE condition.
regards,
asif

Hi
you can use the Function module
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
    destination            = 'LP01'                       "'Printer name
    list_name              = 'TEST'
    list_text              = 'SUBMIT ... TO SAP-SPOOL'
    immediately            = ' '
    line_size              = '2000'
    no_dialog              = 'X'             "pass space to Pop screen for Print option
IMPORTING
    out_parameters         = wa_pri_params
    valid                  = w_valid.
"next call below things
NEW-PAGE PRINT ON NO DIALOG PARAMETERS wa_pri_params.
     "and try to Print the values inside the new-page
NEW-PAGE PRINT OFF.
Prabhudas

How to access the activities created by an enduser especially when the enduser has left the organization?Please help me out with the possible solution

How to access the activities created by an end user especially when the end user has left the organization?Please help me out with the possible solution

Hi Ramesh,
In the web UI we have business role IC_manger where you can search the activities based on employee responsible and you can use business transaction assignment functionality to assign those activities to any other end user or team.
Else you can also use Agent inbox functionality if you have configure the agent inbox for those activity.
Hope this helps solving your query

Upgrading my MPB.. Please help me decide with the graphics card

Hi Guys
I have got a late 2007 model MBP Santa Rosa 2.2 Ghz 2 Gb RAM and 128 Mb NVIDIA GeForce 8600M GT video card
I am planning to upgrade my MBP. I just want to know that how is the performance of NVIDIA GeForce 9400M integrated graphics processor 256 Mb compared to my dedicated one. I do normal photo and video editing and DONT play any games at all.. I sometimes feel that my this MBP is a bit laggy when I use photoshop or something.
If the integrated one that is standard on MBP's is quite good to what I generally do (which I have mentioned above), then I wont look into getting the one with dedicated Graphics as I need to save money.
I have tried looking on the internet but I cant find anyone who can give direct comparison between these two in MBP
Please suggest!!!
Thanks heaps!

Hey Singh,
If you're looking for completely anecdotal evidence, I can help with that. I recently purchased the 2.8 GHz 17" MacBook Pro with the dual 9400M (256MB shared/9600GT (512MB dedicated) graphics cards. I user Photoshop and iPhoto a lot, a little iMovie and some Final Cut Pro. I also do quite a bit of video encoding, DVD rips and conversions to iPhone format. I prefer my PS3 for gaming and never do so on the Mac.
What I have noticed is that I can really tell the difference in graphics performance when encoding video and not much any other time. A slight exception is with hardcore Photoshop filters. For those two things I'm glad I can switch to the dedicated 512 card especially when time is a concern. It's also really nice to be able to choose between horsepower and battery life if necessary.
All that being said, if I was getting a 15" MBP I would forgo the extra graphics card and spend the money on more RAM which seems to make a bigger difference in what I do. The 17" did not have an option like that so I have the dual card and a lot of screen real estate. That reminds me, I use the additional 24" LED Cinema display and do not notice any difference when running the extra monitor.
My girlfriend owns the 13" MacBook Pro with the 256MB integrated graphics and iMovie and Photoshop run very nicely and are vastly improved in comparison to her old white MacBook. I have owned the 2007 model MBP Santa Rosa 2.2 Ghz and the new 13" 2.2 6GHz MBP is noticeably quicker in all respects.
In conclusion I would say that the dedicated graphics card is a must for anything in Final Cut Studio (Motion, FCP, DVD Studio Pro) or anything 3D, but for typical Photoshop use, iMovie, etc. you'd be better off with more RAM if you had to choose. If you don't have to pick between the two, get the 512MB card with 8GB of RAM and sleep tight knowing that if your Mac is too slow there's nothing you can do about it hardware wise and you're just too quick
If you're looking for benchmark tests, this article is good http://www.macworld.com/article/141144/2009/06/macbookprobenchmarks.html
Hope that helps!

Can you please help me out with the answers

u2022     Created a report to display details of the Open Picking Slip for a given Shipping Point and Delivery Date.
u2022     Developed a report program for stock details in various storage locations. Which displays material number, material group, material description, quantity and plat based on selection screen fields material number and plant number.
u2022     Created a ALV to display the customer arrears report.
u2022     Developed a BDC program to upload Customer master data from legacy to sap system using Call transaction method.
u2022     Modification of Standard Sap script layout set for Sales Order output and printed SAP Scripts using print programs.
u2022     Using SAP Standard Report program RSTXLDMC to upload logo and display it as Standard text

Mazhar,
Maintain the hierarchy for the object and in the Hierarchy display properties of that info object you can maintain the levels.
If the values are appearing in Unassigned then you need to check out the hierarchy definition once. Please check out that and revert back if you have the same issue repeats.
Hope this helps...
Regards
Gattu

Hi all, please help me out with the issue...

Im getting this error ...what should i do to clear this ??
ORA-12012: error on auto execute of job 5103
> ORA-02149: Specified partition does not exist
> ORA-06512: at "SYS.DBMS_SYS_SQL", line 826
> ORA-06512: at "SYS.DBMS_SQL", line 39
> ORA-06512: at "SYSTEM.PR_MODIFY_BUFFER_PARTITION", line 16
> ORA-06512: at line 1

Rookie#007 wrote:
Im getting this error ...what should i do to clear this ??
ORA-12012: error on auto execute of job 5103
> ORA-02149: Specified partition does not exist
> ORA-06512: at "SYS.DBMS_SYS_SQL", line 826
> ORA-06512: at "SYS.DBMS_SQL", line 39
> ORA-06512: at "SYSTEM.PR_MODIFY_BUFFER_PARTITION", line 16
> ORA-06512: at line 1
Did you bother to find any info about the bold text (emphasis is mine) ?
Aman....

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

HT4972 the apps weve downloaded are not working. please help, extremely frustrated with our ipod 4

the apps we have downloaded are not working, please help, extremely frustrated with our ipod 4

See my previous reply for for the apps closing.
For the wifi problem:
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect OK before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Firefox is not able load any websites but others programs can. i tried everything given in the support forum but nothing worked out. so can you please help me out with it?

firefox is not able to load any websites... i tried everything given in the support forum under the topic firefox is not able to load any websites but other programs can.. but still i am facing the same problem. so please help me out with this issue!!

firefox is not able to load any websites... i tried everything given in the support forum under the topic firefox is not able to load any websites but other programs can.. but still i am facing the same problem. so please help me out with this issue!!

Please help me in resolving the URL with parameters.

Hello,
Please help me in resolving the URL with parameters. If desformat is pdf, a pop up message �Acrobat Reader could not open �pa034922.fdf� because it is either not a supported file type or because the file has been corrupted��.
if desformat is html or xml, the following URL is working.
our requirement, report should be in pdf format.
http://servername:7778/dev60cgi/rwcgi60?server=Rep60_mclaren&&userid=bizsystest/test@business&destype=cache&desformat=pdf&report=salary_dept.rdf&p_dept_list=''ABE','ASE','CE','CHE','CS','DE','DIAL','ECE','ERC','IE','ME','PTE','ARC','ASE1''&p_status_list=''ACP','AD','AP','ATP','D','FE','HD','INS','P','RP','S','TF','TP','TS','ST','GS','O''&p_sex=''M','F''&p_order_by='Name'&p_totals='NO'
Thanks in advance,
Usha

We've seen this bug on machines running IE6 with a certain security patch (I forget its number). There's a thread in the Metalink reports forum about it. It appears to be somewhat tied to another problem where IE runs the report twice (you can see that in Showjobs. You're seeing the problem in 6i; I believe it persists in 9i.
The workarounds are (1) set Acrobat so it doesn't open within IE or (2) switch to a different browser, like Netscape. For workaround 1, Start Acrobat Reader, Choose File -> Preferences -> General, Uncheck Web Browser Integration
There's some evidence that it occurs more often with urls that include single quote characters. I think it's worse with XP, but I don't have any proof.
If you check Adobe's site, you will see this isn't just an Oracle Reports problem. I think we're waiting for Microsoft on this one, so don't hold your breath for a quick fix.
-- jim

In Data Quality transform please explain Associate transform with the help of any example.

In Data Quality transform please explain Associate transform with the help of any example.

Hi Neha,
If we are using multiple match transforms and consolidate the final output we will use associate transform .
Let me explain with one example based on data quality blue prints for USA .
We have customer/vendor data .     We need to find the duplicates .
1. First we will find the duplicates on   Name and Address
2. Second we will find the duplicates on Name and Email
3. Third we will find the duplicates on Name and Phone
Here why we need to find the duplicates in multiple stages . If we are finding the duplicates on combination of Name, Address, Email and Phone we may not get proper duplicates   as we are finding the potential duplicates . That's why we are finding the duplicates on different combinations .
In this case we will get the different group numbers for each match combination . Each combination name is there .
We want to consolidate and give the group number to the whole set of duplicates . We will pass these 3 match groups to associative transform and generate the consolidated match group for the input data.
I hope you understand the concept .
Thanks & Regards,
Ramana.

HT5312 I forget answer to my qustion with rescue email adrees please help me and send the answer to my main mail. Thank you very much

I forget answer to my qustion with rescue email adrees please help me and send the answer to my main mail. Thank you very much

We are fellow users here on these forums, you're not talking to iTunes Support.
If you don't have access to your rescue email account, or you don't have one on your iTunes account, then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to add/change a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Dear Friends, I am trying to draw a structure in Adobe Illustrator with 3D effect. But I am unable to give it proper shape. Can someone please help me for drawing the similar structure as showed below. I have facing problems in giving 3D effect.

Dear Friends, I am trying to draw a structure in Adobe Illustrator with 3D effect. But I am unable to give it proper shape. Can someone please help me for drawing the similar structure as showed below. I have facing problems in giving 3D effect.
Thanks a lot for your great help...

i made a quick example:
and what it's made of:
just shapes and gradients. used a combination of pathfinder and shape builder to get the shapes exact.

Suddenly on sunday while i was working, my macbook Air stopped working, right after that i tried getting it on but nothing came other than a grey screen with a question mark right in the center could you please help me in rectifying the problem. Would th

Suddenly on Sunday while i was working, my macbook Air which i bought last year in Spetember from Arkansas, Little Rock stopped working, right after that i tried getting it on but nothing came other than a grey screen with a question mark right in the center. Could someone please help me in rectifying the problem. Would thi issue also affect saved data. However, I have handed the notebook to Apple for reapirs and they will revert by Thursday 12/04/2012.

I just received some horrifying news from Adobe about my production suite. I just FINALLY learned today that what I've been trying to do for over a week now - CAN'T be done because of compatability issues involving updates of both Adobe & Microsucks Winders!!! I sincerely hope this is not your problem. Mine is ALMOST HOPELESS!! Being in this HOPELESS Obamma economy,,,, leaves NO STIMULUS in which to currently upgrade everything that needs upgraded for me to fully use my INVESTMENT in Adobe Suite - sad, horrible and SICKENING!!!
I just wanted to post this. And again, I truly hope you find a solution. Good Luck!

How to stream with the player strobe media playback videos using http dynamic streaming?

Hi..
please could i have some help about the player strobe media playback?
i would like to know how to stream with the player strobe media playback videos using http dynamic streaming.
I have already installed the server,i put my own video in the video on demand folder.i downloaded the player but i don't know how to stream that video with the adobe protocol dynamic streaming.

http://osmf.org/configurator/fmp/
Use this configurator, and use the same code it generates with your strobemediaplayback.swf
Also make sure the domain where strobemediaplayback.swf is being called from and resides, is in your /webroot/crossdomain.xml file, or it will not work.

Please help me: streaming with the wrt54g

Similar Messages

Maybe you are looking for