Please help me to choose the laptop.

I saaw a lot of models but i can't choose. I liked some models like HP ProBook 4730s(A6E93EA) or (A1E72EA) but in this series the ethernet port placed in such uncomfortable place. I need laptop in such price category. Can you help me to chose something like that laptop but with eth port in different place.

Where do you want the ethernet port? I hardly ever use mine because laptops are made to be used with wireless, but every now and then like in a hotel room you have to plug in. The ethernet port on the left side is pretty standard on most laptops these days. They used to put them in the back but that was not a good design because people would push them into a wall and break things. The HP Consumer models and most of their laptops have the ethernet port on the left side.

Similar Messages

Please help me to choose the correct version for my needs

Hi. Currently we have an ESXi server with 2 virtualized windows server 2012 standard edition. I want to setup a new server. His role will only be WDS. The server will have to be a domain controler in order to use WDS or is it not necessary ? If not could
i choose a foundation edition ? I must be able to deploy until 30 images at the same time. Thank you.

WDS has an option to be installed on a domain controller but it does not have to be a domain controller. It makes sense to have it as a member of a domain.
. : | : . : | : . tim

Please help me to choose the right Windows Server 2012 edition

Dear All,
I will plan for new hardware for a University. I plan to have Windows Server 2012 network with upto 10,000 users. I will have Exchange, SharePoint and SQL Server as well.
Please advice on what Windows Edition I should select as well as # of CAL to be purchased.
I am expecting to have a Server of 32GB of RAM, 12TB of hard disk. I will take advantage of HyperV to setup Database server, sharePoint and Exchange
Thank

For the CALs, you can read about them there: http://blogs.technet.com/b/volume-licensing/archive/2014/03/10/licensing-how-to-when-do-i-need-a-client-access-license-cal.aspx
For the Windows Server 2012 edition to use when involving virtualisation, you can read about that here: http://download.microsoft.com/download/7%2F7%2F0%2F7707E736-4557-4310-9709-87358F7E6D1A/WindowsServer2012VirtualTech_VLBrief.pdf
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Please, help me to choose the right router

Hello,
For our new small business company's office we need a router, which simultaneously satisfies all of the following conditions:
- 4 (or 8) ethernet gigabit ports;
- Wireless N;
- Easy VPN connection via Windows VPN Client';
- Wake On LAN capability
Is there a model, that have all of this? Thank You!

Hi Danail,
You can have RV042G or RV320 or RV082.
RV042G and RV320 has four Gbit ports. RV082 has eight fast ethernet ports. For Easy VPN client connection you can use Cisco Quick VPN software. You can download the Quick VPN client software from Cisco.com.
Please refer to the datasheet below to know more about each of the product.
RV320 datasheet:
http://www.cisco.com/en/US/prod/collateral/routers/ps10907/ps9923/ps11997/data_sheet_c78-726132_ps9923_Products_Data_Sheet.html
RV042G Data sheet -
http://www.cisco.com/en/US/prod/collateral/routers/ps10907/ps9923/ps12262/data_sheet_c78-706724.html
RV082 datasheet:
http://www.cisco.com/en/US/prod/collateral/routers/ps9923/ps9926/data_sheet_c78-501227.pdf
Thank you.

Please help me with choosing the Hardware for my new computer

I am creating a new editing machine that i will be using After effect, photoshop, flash, illustrator, and 3ds max. I do a lot of 3d and 2d animation, video editing and graphic design.
This is the system i am currently planing on building:
CPU: intel core i7 2600k ( I will be overclocking it to around 4.8 ghz)
Motherboard: Asrock p67 extreme6
Memory: G.Skill ripjaws x series 16gb ddr3 1600 cas latency 7
Graphics Card: Gtx 570
Power Supply: Rosewill bronze series 1000w
Hard drive: 4x Corsair F120 in raid 0
Case: Bitfenix collosus
Cpu cooler: Noctua Nh-d14
I have a budget of $2500 for this computer. I was wondering if anyone has any suggestions on things i should change or would recommend a completely different build for my budget.
Also i was wondering if the gtx 570 was a stupid choice and i should get a quadro 2000 instead. I dont do any gaming.
One last thing, do 4 ssd in raid 0 help at all or should i just get 8 hard drive in raid 10, or should i spend less money on hard drives.
P.S. I know that the the i7 2600k has been recalled but i am in no hurry to build this computer. Also feel free to recommend hardware that hasn't yet been released but will probably be out in the next 8 months.
P.S.S All of the programs i listed are CS5.

Agree with all from Todd, and some things I'd consider:
Dual CPUs will pack more rendering punch, especially in your 3D work.
Even though 16GB of RAM is generous, I'd consider more. Remember the rule: 2GB for each CPU core, plus some more for OS and other applications. If you're running 8 threads/cores for rendering, 24GB would be optimum.
While the hard drives will provide awesome performance in that config, it's a lot of money to spend on less than a terabyte of storage. RAID 0 is also pretty volatile, so be sure to run a reliable and regular backup system.
For my money, I'd probably use one good-sized SSD for a system drive, then 3 or 4 conventional (or hybrid SSD) drives for media storage, with a decent RAID controller. You'll get 3 times the storage for half the price, and still have quite zippy I/O speeds.

Please Help me to Choose the best config to run forms on web

Hi,
I have started upgrading my application from Dev2000 1.3 to Dev2000 6i in order to deploy on web. I have few questions to ask
1. I need to know which config is the best & fast to run my applications out of
     1. Applet
     2. IE50Native
     3. JInitiator
2. For testing I have configured forms server in socket mode. When I am using JInitiator even after exiting the application from test terminal, "ifweb60.exe" process initiated due to this session remains running. It takes long time when I try to initiate the same application for second time. This problem is not frequent, but this has happened 4 times while testing. Could this be due to Pentium4.
Thanks in advance
Syed

saj123 wrote:
I'm quite new to j2EE developement.
Currently im working on a web based user management application ( a small scale one ).
For that im hoping to use JSP s for presentaion tier and EJBs for business logic. This business logic seems to be having more on database accessing. Im not using Entity Beans for data access , but hope to use Session Beans.Why EJBs? POJOs will work just fine.
>
Is it ok if i develop according to this model , or is it better to use Entity Beans for data acccess ?Neither. Use POJOs. What are EJBs buying you?
Is it a bad design to use Session Beans for data accessing ?Why?
Or else , what if i avoid EJB s completely and database access is done via JSP itself ?Ouch, no. JSPs are for presentation only.
Or i have another option , that is , using JSP for the presentation layer and Servlets for database accessing.Wrong again.
what is the preferred way ? How i can decide a better way ?Learn how to layer an app properly. Learn Spring. http://www.springframework.org
%

I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.

I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .

If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp

Please help me in resolving the URL with parameters.

Hello,
Please help me in resolving the URL with parameters. If desformat is pdf, a pop up message �Acrobat Reader could not open �pa034922.fdf� because it is either not a supported file type or because the file has been corrupted��.
if desformat is html or xml, the following URL is working.
our requirement, report should be in pdf format.
http://servername:7778/dev60cgi/rwcgi60?server=Rep60_mclaren&&userid=bizsystest/test@business&destype=cache&desformat=pdf&report=salary_dept.rdf&p_dept_list=''ABE','ASE','CE','CHE','CS','DE','DIAL','ECE','ERC','IE','ME','PTE','ARC','ASE1''&p_status_list=''ACP','AD','AP','ATP','D','FE','HD','INS','P','RP','S','TF','TP','TS','ST','GS','O''&p_sex=''M','F''&p_order_by='Name'&p_totals='NO'
Thanks in advance,
Usha

We've seen this bug on machines running IE6 with a certain security patch (I forget its number). There's a thread in the Metalink reports forum about it. It appears to be somewhat tied to another problem where IE runs the report twice (you can see that in Showjobs. You're seeing the problem in 6i; I believe it persists in 9i.
The workarounds are (1) set Acrobat so it doesn't open within IE or (2) switch to a different browser, like Netscape. For workaround 1, Start Acrobat Reader, Choose File -> Preferences -> General, Uncheck Web Browser Integration
There's some evidence that it occurs more often with urls that include single quote characters. I think it's worse with XP, but I don't have any proof.
If you check Adobe's site, you will see this isn't just an Oracle Reports problem. I think we're waiting for Microsoft on this one, so don't hold your breath for a quick fix.
-- jim

Please help me to format my laptop hp pavilion dv6 Windows 7 Home premium 64 bit?

Please help me to format my laptop hp pavilion dv6 Windows 7 Home premium 64 bit?

Hi,
There are Three main ways to restore your notebook to format your HDD and return the notebook to its 'Factory Condition' - see the document on the link below.
Performing An HP System Recovery - Windows 7.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Please help me to change the language from Danish to swedish i PS CS5

please help me to change the language from Danish to swedish i PS CS5
In the program (interfaces) i can only choose Danish

There is nothing to choose. The language is determined by your serial number and the choice of language during installation. You need to reinstall in that language.
Mylenium

Please help me to solve the issue in my query.

Hi All,
Please help me to understand the mistake what i did in below query and help to resolve that.
Actually i am trying to create a query to filter the records from db based on my input parameter.
If my input parameter is 1(@showallrecords) then i need to show all the records which has the IsLatest as 1
If my input parameter is 0(@showallrecords) then i need to show all the records which has the IsLatest as 0
select * from tabel1 INNER JOIN tabel2
ON tabel1.KeyId = tabel2.KeyId
and (@showallrecords = 1 and tabel1.IsLatest = 1 )
and (@showallrecords = 0 and tabel1.IsLatest = 0 )
when i am executing the above query with the parameter @showallrecords = 1 ,db is returning 0 rows.If i am executing the above query after removed the last line and (@showallrecords = 0 and tabel1.IsLatest = 0 ) then records are coming.
i understand that 1=0(last line) and the condition is not true.So its affecting the result.
Please help me to solve this.

select * from tabel1 INNER JOIN tabel2
ON tabel1.KeyId = tabel2.KeyId
WHERE (tabel1.IsLatest = @showallrecords Or @showallrecords=0)

PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"

HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradhar

Hi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420

Good day please help me, my iphone 5 wont turn on. i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, i

good day please help me, my iphone 5 wont turn on. i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, so please help.me.

Please make a Genius Appointment and take it in for service. By now it probably cannot be fixed, but you never know.

HT1918 I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

Please help me to choose the laptop.

Similar Messages

Maybe you are looking for