Please help me to correct the script

I try to write a script by my slef, but not work
app.findGrepPreferencest = firstLineIndent:8, leftIndent:8;
app.changeGrepPreferences = firstLineIndent:8, leftIndent:16;
app.changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
Can someone please help me to correct the script, please.

both two script are working
but waht if I change the script into this format?
function(){
app.findGrepPreferences.firstLineIndent  = "8 mm";
app.findGrepPreferences.leftIndent  = "8 mm";
app.changeGrepPreferences.firstLineIndent  = "8 mm";
app.changeGrepPreferences.leftIndent  = "16 mm";
app.selection[0].changeGrep();
app.findGrepPreferences.firstLineIndent  = "8 mm";
app.findGrepPreferences.leftIndent  = "16 mm";
app.changeGrepPreferences.firstLineIndent  = "8 mm";
app.changeGrepPreferences.leftIndent  = "24 mm";
app.selection[0].changeGrep();
and then so on,
Can it works?

Similar Messages

  • Please help me to correct the Variable exit

    Hello,
    I am trying to calculate the previous month from the user input 0CALMONTH variable 0I_CALMO. I have created another variable ZVPCALMON and have restricted a key figure Amount with this variable.
    I have written the below code. When I debug the query I am able to get below in E_T_DATA
    Sign -> I
    OPT ->      EQ     
    LOW -> 200508
    when I enter the variable 09/2005 but I dont get the data in the report. However when I run the report without restricting the keyfigure with ZVPCALMON and input the calmonth as 08/2005 I am able to get the data.
    IF i_step = 2.
      CASE i_vnam.
    WHEN 'ZVPCALMON'.
            CLEAR : l_s_range,
                    l_month_low,
                    l_year,
                    w_var_range.
          LOOP AT i_t_var_range INTO w_var_range WHERE vnam = '0i_CALMO' .
            l_year  = w_var_range-LOW(4).
            l_month_low = w_var_range-low+4(2) - 1.
            IF l_month_low = 0.
              l_month_low = c_12.
              l_year  = l_year - 1.
              CONCATENATE l_year
                          l_month_low INTO l_s_range-low.
            ELSE.
              CONCATENATE l_year
                         l_month_low INTO l_s_range-low.
            ENDIF.
            l_s_range-sign = c_sign_i.
            l_s_range-opt  = c_range_opt_eq.
            APPEND l_s_range TO e_t_range.
          ENDLOOP.
        WHEN OTHERS.
      ENDCASE.
    ENDIF.
    I think I am missing something. Could anyone suggest what could have been wrong.
    Thanks,
    KK

    Hi KJ,
    Thanks for the reply. I don't know why but a simple offset doesnt work either. I have restricted the key figure with 0CALMONTH Variable and put the offset '-1' but still I dont get the result. Thats the reason I have gone for the variable exit.
    thanks,
    Kalyan

  • PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"

    HAI EVERYBODY,
    PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
    step1 : i have taken SRM client 810 and named it as CHINNISRM
    step2 : i  have taken r3 client 810 and named it as CHINNIR3
    step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in   r3   and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
    step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like  "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client  named with T90CLNT810.
    oss :588701
    Solution
    There are different cases in which different forms of processing are
    required or where several options exist:
    - The logical system name of an R/3 Backend client was changed in
    current operation. In this case, the data hangs in the outbound
    queues of the R/3 Backend system as specified under point 1 of
    the symptom. In this case, the logical system name must be
    changed back to the original value. Then the outbound queues
    can be reactivated. If no data was transferred to the EBP/CRM
    server before the change, also a correctioin of the check table
    is possible.
    - The same logical system name was used again in a new client of
    an R/3 Backend system that was linked to the EBP/CRM server. In
    this case, the data is in the inbound queue of the EBP/CRM
    server with the exception GUID_FOR_LOGSYS_CHANGED. In this
    case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of  the R/3 Backend system you have linked has exactly the same
    data as the old client and if it is meant to replace the old
    client (that is, this was deactivated), also a correction of
    the check tables is possible. In this case, the inbound queues
    can be reactivated after the correction.
    oss:765018
    1. If the situation in your system corresponds to the situation described
    under "Reason and Prerequisites" and if symptom 1 occurs, you can
    delete the table entry from table CRMPRLS table (there is just one
    entry). Since there is no maintenance dialog for this table and you
    cannot maintain it using transaction SE16, you must use a report to
    delete it. This report is attached to this note as correction
    instructions.
    Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
    code from the correction instructions. You cannot implement this
    source code using transaction SNOTE.
    You can use the report in every plug-in or plug-in basis system, even
    if it is not specified in the validity section.
    After you have run the report, you can trigger existing queues again
    in transaction SMQ1.
    2. If the situation in your system corresponds to the situation described
    under "Reason and prerequisite" and if symptom 2 occurs, you can
    delete the entry from table CRMMLSGUID (there is just one entry).
    Since there is no maintenance entry for this table and you cannot
    maintain it using transaction SE16, you must use a report to delete
    it. This report is attached to this note as correction instructions.
    If they do not yet exist, add the following messages to message class SMOF in your logon language:
    Message Message short text
    303 User &1 is not allowed to change table &2.
    304 User &1 IS not allowed to display table &2.
    305 Logical system &1 was not found in table &2.
    306 System error! The current client was not
    found in table T000.
    Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
    source code from the correction instructions. You cannot implement
    this source code using transaction SNOTE.
    You can use the report for every release of the CRM system, even if it
    is not specified in the validity section. The only exceptions are CRM
    releases with Support Package versions that are too low such as CRM
    Release 3.0 with Support Package 12.
    After you have run the report, you can trigger existing queues again
    in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
    the CRM system.
    so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
    thanks and best regards,
    n.chakradhar

    Hi chakradhar,
    Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
    BR// 420

  • SQL Server upgradation Issue : 2012 to 2014. A job step received an error at line 1 in a PowerShell script. The corresponding line is 'set-executionpolicy RemoteSigned -scope process -Force'. Correct the script and reschedule the job.

    Message
    Executed as user: CORPTST\XXXXX. A job step received an error at line 1 in a PowerShell script. The corresponding line is 'set-executionpolicy RemoteSigned -scope process -Force'. Correct the script and reschedule the job. The error information returned
    by PowerShell is: 'Security error.  '.  Process Exit Code -1.  The step failed.
    I receive this error during the sql server job 'syspolicy_purge_history' execution  when sql server got upgraded form SQL Server 2008 to 2014.

    Hi Vishnu,
    According to the error message, it also occurs in SQL Server 2012.  Here is a feedback about the error in the link below.
    https://connect.microsoft.com/SQLServer/feedback/details/754063/sql-server-2012-syspolicy-purge-history-job-step-3-fails-with-security-error
    To resolve this issue, please change the value of the following registry key from ‘RemoteSigned’ to ‘Unrestricted’. For more details, you can review this similar
    blog.
    HKLM\SOFTWARE\Microsoft\PowerShell\1\ShellIds\Microsoft.SqlServer.Management.PowerShell.sqlps120\ExecutionPolicy
    Thanks,
    Lydia Zhang

  • Please help me to solve the issue in my query.

    Hi All,
    Please help me to understand the mistake what i did in below query and help to resolve that.
    Actually i am trying to create a query to filter the records from db based on my input parameter.
       If my input parameter is 1(@showallrecords) then i need to show all the records which has the IsLatest as 1
       If my input parameter is 0(@showallrecords) then i need to show all the records which has the IsLatest as 0
    select * from tabel1 INNER JOIN tabel2    
    ON tabel1.KeyId = tabel2.KeyId 
    and (@showallrecords = 1 and tabel1.IsLatest = 1 )
    and (@showallrecords = 0 and tabel1.IsLatest = 0 )
    when i am executing the above query with the parameter @showallrecords = 1 ,db is returning 0 rows.If i am executing the above query after removed the last line and (@showallrecords = 0 and tabel1.IsLatest = 0 ) then records are coming.
    i understand that 1=0(last line) and the condition is not true.So its affecting the result.
    Please help me to solve this.

    select * from tabel1 INNER JOIN tabel2
    ON tabel1.KeyId = tabel2.KeyId
    WHERE (tabel1.IsLatest = @showallrecords Or @showallrecords=0)

  • I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.

    I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .

    If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
    Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
    Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp

  • Good day please help me, my iphone 5 wont turn on.  i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, i

    good day please help me, my iphone 5 wont turn on.  i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, so please help.me.

    Please make a Genius Appointment and take it in for service. By now it probably cannot be fixed, but you never know.

  • HT1918 I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

    I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

    You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

  • Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

    need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

    Try with the latest Apple driver package for Canon (released 15th Feb):
    http://support.apple.com/kb/DL899
    This solved my problem with the printing.

  • Please help me ,i forgot the synchronising password for my mac pro lion backup disk

    please help me ,i forgot the synchronising password for my mac pro lion backup disk

    If the backup volume is encrypted, and you forgot the password, then you'll have to erase the volume and start a new backup. There's no way to recover the password.

  • The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assi

    Hi ,
    We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and  as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
    We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
    "The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
    this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
    Please let us know reason behind this error message.
    Thanks,
    Mruduala

    You are kidding?  It took me about 3 minutes to scroll down on my tab to get to the triplex button!
    Habe you read the error message? 
    Quote:
    java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
    Check the trigger and it should work again.
    Timo

  • Every time I download a file to my macbook pro, it saves it to downloads but changes the name and inserts % sign.  Please advise how to correct the name that it is saved under.

    Every time I download a file to my macbook pro, it saves it to downloads but changes the name and inserts % sign.  Please advise how to correct the name that it is saved under.

    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
    Apple ID FAQs
    http://support.apple.com/kb/HE37

  • I want to check the main diffrence in Pop up block enabled and disabled.But,i don't get any difference.Would u please help me to understand the difference using one practical example of website

    I want to check the main diffrence in Pop up block enabled and disabled.But,i don't get any difference.Would u please help me to understand the difference using one practical example of website

    Here's two popup test sites.
    http://www.kephyr.com/popupkillertest/test/index.html
    http://www.popuptest.com/

  • Can you please help to understand how the firefox decides on the Expires date for a cached javascript file ( my server did not set any Expire header, but firebox set it down).

    # Question
    Can you please help to understand how the firefox decides on the Expires date for a cached javascript file ( my server did not set any Expire header, but firebox set it down). I tried to understand but different javascript file gets different Expires date value when it is being cached. Please help me as I tried lot and could not get proper answer for this. Thanks in Advance.

    Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
    http://forums.mozillazine.org/viewforum.php?f=25 <br />
    You'll need to register and login to be able to post in that forum.

  • Please help me in resolving the URL with parameters.

    Hello,
    Please help me in resolving the URL with parameters. If desformat is pdf, a pop up message �Acrobat Reader could not open �pa034922.fdf� because it is either not a supported file type or because the file has been corrupted���.
    if desformat is html or xml, the following URL is working.
    our requirement, report should be in pdf format.
    http://servername:7778/dev60cgi/rwcgi60?server=Rep60_mclaren&&userid=bizsystest/test@business&destype=cache&desformat=pdf&report=salary_dept.rdf&p_dept_list=''ABE','ASE','CE','CHE','CS','DE','DIAL','ECE','ERC','IE','ME','PTE','ARC','ASE1''&p_status_list=''ACP','AD','AP','ATP','D','FE','HD','INS','P','RP','S','TF','TP','TS','ST','GS','O''&p_sex=''M','F''&p_order_by='Name'&p_totals='NO'
    Thanks in advance,
    Usha

    We've seen this bug on machines running IE6 with a certain security patch (I forget its number). There's a thread in the Metalink reports forum about it. It appears to be somewhat tied to another problem where IE runs the report twice (you can see that in Showjobs. You're seeing the problem in 6i; I believe it persists in 9i.
    The workarounds are (1) set Acrobat so it doesn't open within IE or (2) switch to a different browser, like Netscape. For workaround 1, Start Acrobat Reader, Choose File -> Preferences -> General, Uncheck Web Browser Integration
    There's some evidence that it occurs more often with urls that include single quote characters. I think it's worse with XP, but I don't have any proof.
    If you check Adobe's site, you will see this isn't just an Oracle Reports problem. I think we're waiting for Microsoft on this one, so don't hold your breath for a quick fix.
    -- jim

Maybe you are looking for

  • Can anyone tell me ??

    Just wondreing if anyone can tell me if a AMD AthlonXP 2600 [2.08GHZ 333] OEM would run ok in a K7T266 PRO 2 (MS6380) M/BOARD? What I need to know is will it run at its full potentual? Or will it not be able to (does an older board support a newer pr

  • Does anybody know where to buy a centronics cable?

    I have a power pc G4 with firewire ports. And I have a hp printer that has a 36 pin (mini) centronics parallel port. Does anybody makean adapter for this ? Thank you.

  • Cut-Off Entries in Z-Condition table during Initial Download

    Hi there, I have implemented in our CRM 5.0 / Backend 4.70 a new condition type, access sequence and condition table that uses two Z-fields. The customizing download worked well. I also created an adapter object for the initial download of the condit

  • Find text name of item text of object eban

    How to find the text name of item text of object eban. Thanks, Sai.

  • Open a new browser window from applet

    Anybody know how to open a new Netscape window by pressing a button in an applet? Which class handles it? Thanks a lot. wz