Please help me to find airplay icon on my ipad

I just bought the new Apple TV, how can I get the airplay icon on my ipad?

Double tap the home button and look next to the volume slider. It's only visible if you are connected to a device on the same WiFi network.

Similar Messages

Can't find AirPlay icon in new iPad

can't find AirPlay icon in new iPad

I was experiencing the same problem. This is the solution I figured out:
Check the wireless settings on your router. Ensure the "Enable Wireless Isolation" is not selected. If this is enabled, devices cannot talk to one another even if on the same network.
Hope this helps.
T.

Can not find airplay icon on my ipad 3rd gen

I have a 3rd gen Ipad, I have kept everything up to date. I get airplay on youtube, but have no airplay in my settings or on my pull up window. I want to be able to play videos off safari to watch on my airplay tv like I do with you tube. where is it? can I do it? how do I fix it?

Good day wickedweaver,
The following article has information on how to use AirPlay from your iPad.
Thanks for using Apple Support Communities.
Safe computing,
Brett L

I can't find airplay icon

i can't find airplay icon on my ipad and iphone4

Airplay is not a standalone app. However, you will find it inside other apps such as iTunes in your iOS devices
You have to be connected via Wi-Fi and on the same network as the ATV

HT204291 ipad( gen 1) can't find airplay icon. Help!

Where do I find the airplay icon on my iPad? Thanks.

steadyslack,
Check these links out:
http://support.apple.com/kb/HT4437
or
http://support.apple.com/kb/TS4215

CAN NOT FIND AIRPLAY ICON ON IPAD MINI RETINA IOS 7.1.1??

HELLO..
I seem to be having quite a challenging day!!
I can not seem to find my airplay icon on my ipad mini retina display running ios 7.1.1!!!
i have searched and nothing seems to help
have rebooted also
my ipad is running on the same wireless home network... can connect as adhoc...
but can NOT find airplay not by going to settings control panel neither by swiping up on home screen...
only have an airdrop icon there in the middle?!
any suggestions please?

Thanks Phil0124 for replying..
yes there is and they are on same wifi network...
also tried trial version of Airserver and was actually doing that to purchase a full version of that only to find I do not even have Airplay, I wonder how?!

Please help me to find my iPad and iPhone 5C. I lost all of them last night. I set up icloud for my devices but i can't find them because they were not connect to the Internet. Please guide me other ways to find my "best friends".

Dear Apple,
Please help me to find my iPad Air 2 64 GB and iPhone 5C 8GB. They're in IOS 8.0 maybe...I lost all of them last night. I set up icloud for my devices but i can't find them because they were not connect to the Internet. Please guide me other ways to find my "best friends". They're very important to me. Many important files for my job in here and it has sentimental value to me. My boyfriend gave it for me so i don't want to lose them. And because i just lost my iPad Air last 3 month, and now i just bought iPad Air 2 two months ago. I'm so sad and lost. I want to catch the thief to the police so bad because they keep my bag and many other important things. I can not do anything without them. Please help me and contact me via my email or my phone. Thank you very much. Hope to receive your answer soon.

Hey there thaovy309,
Welcome to Apple Support Communities.
The linked article below provides a lot of great information and suggestions that should address your concerns about your data and finding your lost or stolen iPhone 5c and iPad Air 2.
If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support
Take care,
-Jason

HT201335 I cannot see the airplay icon on my iPad both iPad and Apple TV on same network help me

I cannot see the airplay icon on my iPad both iPad and Apple TV on same network help me?

ipad1 don't support airplay mirror

PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"

HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradhar

Hi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

HT1937 I would like to help me. My iPhone was lost and stolen and I didn't have configured Find My iPhone. So I could n't find it. Please help me to find it or delete my information and photos. This is my serial No: DN*****TWD. Thank U

I would like to help me. My iPhone was lost and stolen and I didn't have configured Find My iPhone. So I could n't find it. Please help me to find it or delete my information and photos. This is my serial No: DN*****TWD.
<Personal Information Edited by Host>

If you didn't set up Find My iPhone, there's nothing we can do to help you. Sorry.

TS1398 I can longer find the airplay icon on my iPad when I double click the home icon. It worked fine and then mysteriously disappeared. When I click the music icon there is an airplay icon top right which is fine for music, but I can't mirror anything e

I can longer find the airplay icon on my iPad when I double click the home icon. It worked fine and i used it for a couple of weeks to mirror with the Apple TV and then it mysteriously disappeared. Now when I double click and slide the icons at the bottom to far left, instead of finding airplay there is an extra music icon and a music control panel. If I open up the music app, there is an airplay icon top right next to volume control which works fine with mirroring the Apple TV, which suggests to me wi-if and networks are fine. I can only mirror music however. Any ideas anyone?

Hello there, Catherine351.
The following Knowledge Base article has some great in-depth information and steps to troubleshoot the issue you're describing:
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
If the issue persists, the Additional Information section has a supplemental link for how to resolve issues with Multi-Tasking that may prove useful as well.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

I need to swich from us store to saudi arabian store, please help me to find solution.

i need to swich from us store to saudi arabian store, please help me to find solution.

See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311

Please help me in finding link to downlaod oracle BI discover

Please help me in finding link to downlaod oracle BI discover
i didnot find discover in obiee so where can find
Thanks in Advance

Hi,
Discoverer is part of BI Standard Edition. You can down load BI from here. You need the 2 CDs for Discoverer Plus and Viewer and the Tools CD for Discoverer Admin and Desktop.
You should also apply the patches to go to the latest version. The LearnDiscoverer blog has details of the latest patches.
Rod West

Why is my ipad doesnt have a software update?please help,i cannot find it.. :(

why is my ipad doesnt have a software update?please help,i cannot find it..

The ipad 1 (no camera) can't be updated beyond IOS 5.1.1.

Please help me to find airplay icon on my ipad

Similar Messages

Maybe you are looking for