Please help me to find the sample code and schema for GetDBDateTime.zip fil
Please help me to find the GetDBDateTime.zip and Guest_Book.zip files.
Tks!
Does this Help?
http://www.oracle.com/technology/sample_code/products/ias/files/psp/GetDBDateTime/Readme.html
Did you install Oracle9iAS ?
Similar Messages
-
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"
HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradharHi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420 -
need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?
Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing. -
Please help me out with the function code of print option in module pool
please help me out with the function code of print option in module pool, along with CASE condition.
regards,
asifHi
you can use the Function module
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
destination = 'LP01' "'Printer name
list_name = 'TEST'
list_text = 'SUBMIT ... TO SAP-SPOOL'
immediately = ' '
line_size = '2000'
no_dialog = 'X' "pass space to Pop screen for Print option
IMPORTING
out_parameters = wa_pri_params
valid = w_valid.
"next call below things
NEW-PAGE PRINT ON NO DIALOG PARAMETERS wa_pri_params.
"and try to Print the values inside the new-page
NEW-PAGE PRINT OFF.
Prabhudas -
My mobile phone is lost, please help me to find the serial number is: DNQKDBS8F8H4, my name is Yu Fan, thank you very much for this is my number: 15052995201
We're not Apple here. We're users. We cannot locate your phone any more than you could locate ours.
If you did not have find my phone activated on your device, there's no way to track it. -
Please help me to find the table for fields where the descriptions are give
please help me to find the table for fields where the descriptions are given below
Customer Support Administrator
first line Support indicatorYou could also try table DD01T. In se 16,put in the description thats needed,you will get to know the respective data elements.
Then you can use DD03L to find the respective table. This would work if the data element is not generic.
Regards,
Anubhav. -
I have lost my new iPhone. Please help. I have the IMEI no and all the details that comes at the back of the box.
Having the imei won't help you find your phone.
If you setup and enabled find my phone prior to losing it then go to icloud.com
If you didn't set it up - then there nothing you can do.
Call your carrier and let them know, change all your passwords. -
How do I find the image name and media_link for an ubuntu image in the Gallery?
I am trying to create VM using Python API.
I have a custom Linux image:
image_name = 'cloudN-Azure-20150205-os-2015-02-05'
media_link = 'https://portalvhds10ssz63zgvb9g.blob.core.windows.net/vhds/cloudN-Azure-20150205-os-2015-02-05.vhd'
When I used this image to create VM, it failed.
I would like to use the ubuntu 1204 image in the Gallery.
How do I specify the image_name and media_link in my Python code? Basically, where and how do I find the image name and media_link for an image in the Azure image Gallery?
Thanks in advance...hi sir,
Did you try to use "List OS Image"? we can get the property form the results:
result = sms.list_os_images()
for image in result:
print('Name: ' + image.name)
print('Label: ' + image.label)
print('OS: ' + image.os)
print('Category: ' + image.category)
print('Description: ' + image.description)
print('Location: ' + image.location)
print('Affinity group: ' + image.affinity_group)
print('Media link: ' + image.media_link)
print('')
Please try it. Any questions or it doesn't work, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
In Report Builder 3.0, I have the following custom code entered:
Public Function SafeDivide(Numerator as String, Denominator as String) as String
Try
If Numerator = “” or Denominator = “” then
Return “-“
End if
If Numerator = “-“ or Denominator = “-“ then
Return “-“
End If
If CDbl(Numerator) =0 or CDbl(Denominator) = 0 then
Return “-“
End if
If IsNothing(Numerator) or IsNothing(Denominator) then
Return "-"
End if
Return Val( ( (CDbl(Numerator) / CDbl(Denominator) )*100 ) )
Catch
Return "-"
End Try
End Function
I call the custom code in the cell with the following equation:
=Code.SafeDivide(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value),sum(Fields!LY_UNITS.Value))
I have the format for the cell set to 0.00%, but it’s not being followed.
I want the result to be formatted as a Percentage, but instead I get values like:
-78.9473684210
80
300
-100
I have the format for the cell set to 0.00%, but it’s not being followed.
How do I do use the custom code and format for a percentage with 2 decimals?Hi AngP,
After testing the issue in my local environment, I can reproduce it. Based on my research, I find this issue is caused by the type of Units_VAR_Percentage cell is string, while the type of CDbl(Parameters!Var_Threshold.Value) is double, so they cannot be
compared.
To fix this issue, we can add a hidden column (Textbox91) next to the Units_VAR_Percentage column, and type =(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value)) /sum(Fields!LY_UNITS.Value) as the expression. Then use the expression below to control the
BackgroundColor:
=iif(iif(reportitems!Units_VAR_Percentage.Value=CStr(format(reportitems!Textbox91.Value,"0.00%")),reportitems!Textbox91.Value,0)>CDbl(Parameters!Var_Threshold.Value),"Yellow","PaleTurquoise")
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
HT5848 What is the sampling rate and codec for iTunes Radio. Is it lossless encoded?
What is the sample rate and codec for iTunes Radio? Is it lossless encoded?
I have to agree with you. There are several forum discussions on bit rate being as high as 256 kbps but I don't see how it could be more than 96 kbps based on the poor sound quality I'm hearing. I'm comparing it to an internet radio station that is 128 kbps and sounds much better.
Am I missing something? -
Please help me in finding the solution for this query
Hi Experts,
How could i print column name's second word in next line
suppose am taking ename alias as "employee name"
i want to print the second word "name" in next line
like
"Employee
Name"
Whats the way of writing this query
Please help me out
Thanks in AdvanceHi,
914618 wrote:
WITH mydata AS
SELECT 1 emp_id, 'John Smith' emp_name FROM DUAL UNION ALL
SELECT 2 emp_id, 'Steve Jobs' emp_name FROM DUAL UNION ALL
SELECT 3 emp_id, 'Larry Allison' emp_name FROM DUAL
SELECT emp_id, emp_name
FROM mydata;
after executing the above query the o/p I am getting is in the normal format like EMP_ID and EMP_NAME
not according to my requirement like
Emp Emp
Id NameWhat are the results you reaally want? Do you want this?
` EMP_ID SPLIT_NAME
1 John
Smith
2 Steve
Jobs
3 Larry
AllisonIf so:
SELECT emp_id
, REPLACE (emp_name, ' ', CHR (10)) AS split_name
FROM mydata
;The results above are 3 rows, not 6.
What results would you want if emp_name contained 3 or more words? For example, if you add this to the sample data:
SELECT 9 emp_id, 'Aung San Suu Kyi' emp_name FROM DUAL UNION ALL -
How to get rid of Apple Support Community notices? my box is full as I receive thousand of messages a day. I cannot handle it anymore, please it is urgent. Help! I have Mac OS X 10.7.5 and unable to find the "notification tab" in my "preferences" I need a image if possible to better understand. Thanks a lot.
Thank you, but I just tried everything you said, my apple id account (icloud) continues and still is receiving the email from ASC each second. My i phone and macpro (i cloud account) is full of messages that I have difficult to erase at once. I have to do it one by one which can take me the whole day. How can i unsucribe from ASC, just get ride of my account, I mean cancel the ASC account, so I will not get any messages. Please help. Thanks.
-
Please add Forms/Reports in the Sample Code section
Hi
When we click on the Breadcrumb menu->Sample code
http://www.oracle.com/technology/sample_code/index.html
In the Sample ApplicationsDevelopment Tools there is no link for
Forms and Reports product. Please add these links there:
http://www.oracle.com/technology/sample_code/products/forms/index.html
http://www.oracle.com/technology/sample_code/products/reports/index.htmlGood point; we have made these additions.
Cheers, OTN -
Please help me to find the drivers/software for SB Surround
Hi all!
Does anyone know how to find the drivers fo the SB Surround 5. external sound card?
Since the HW looks quite similiar to the LIVE 24bit external I tried to install the drivers for it but they didnt work.
I can not find the SB Surround 5. card in the auto update section.
Thanks in advance/BartekHere is the link
http://support.creative.com/downloads/download.aspx?nDownloadId=0588
The driver suite gives you all the software, plus the newest driver.
Unfortunately, creative still hasnt listened to us and has not given us DDL. There was no real need to waste 60 bucks on this thing, if all it does is increase sound quality a tiny amount. When I saw the device I, along with many other customers, came to believe that it would allow for surround sound music. However, the device only outputs media that is already in surround sound, as 5. . I have tried AC3 filter, kx driver (wont work) , rednoreck (no asio) , and tons of random plugins for winamp. I have no idea how to get stereo upmixed to 5. with the spdif out on this card. I am going nuts because of this. If anyone knows how to do that please let me know !? -
Please help me to find link between customer and Business partner
Hi All,
With the help of customer number as input for my report, i have to find the Business partner.
Please help me how to find the Business partner based on the customer number using tables.hi,
Get the customer address number from the KNA1 table
and pass that to the FM ADDR_GET with address group as BP( business partner)
you get the Business partner address number and from that you can find the business partner number from KNA1 table
or in KNVP table field KUNN2 gives the BP number
DATA: w_selection_ds TYPE addr1_sel,
w_addrprnt_ds TYPE adrs_print,
w_adrs1_ds TYPE adrs1.
clear w_address_value_ds.
w_selection_ds-addrnumber = w_kna1_ds-adrnr. "address number
CALL FUNCTION 'ADDR_GET'
EXPORTING
address_selection = w_selection_ds
address_group = 'BP' "business partner
IMPORTING
address_value = w_address_value_ds
EXCEPTIONS
address_not_exist = 1
OTHERS = 2.
regards
Prasanth
Maybe you are looking for
-
Is there a way to browse all "poster frames"/"album artwork" for TV Shows?
Here's the scenario... I have a LOT of old cartoon shows in my iTunes collection, and I have them tagged and sorted as "TV Shows". Unfortunately, when browsing the collection using "Album View", iTunes only shows me ONE poster frame for the entire se
-
Problem in accessing the Interactive forms in an ISR Senario(like MSS)
Hi all, I am facing a problem whenever I try to access the interactive form.I am doing this from the standard Business Package, MSS. I have done all the configurations needed for these ISR Senarios. I suspect the the error is because of some missing
-
How to set color of a row depending on the value of column in JTable?
Hi All, I have a JTable that add rows when the user clicks on the button. In this way there can be any no. of rows in my table. My table contains five columns. When a new row is added , it is added with new data each time. Also the data of the rows k
-
Im trying to use cd sharing but cannot access the disc.Please Help!
Im trying to put cds on my new mba using sharing via a pc. I have installed all the necessary software and I can sucsessfully connect the two computers but when I click on the cd icon on my mba it says ' the operation cant be completed as the origina
-
Error WUC-14 after open a File with CLIENT_TEXT_IO.FOPEN (Oracle 10g)
Hi, the error WUC-14 occurs during open a file with forms10g. F_VersandZahlen := CLIENT_TEXT_IO.FOPEN (F_Dateiname,'w'); Afterwards the error message it ist possible to write into the file and close it correctyl (without am error message - also the I