PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"
HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradhar
Hi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420
Similar Messages
-
Please help me in finding the solution for this query
Hi Experts,
How could i print column name's second word in next line
suppose am taking ename alias as "employee name"
i want to print the second word "name" in next line
like
"Employee
Name"
Whats the way of writing this query
Please help me out
Thanks in AdvanceHi,
914618 wrote:
WITH mydata AS
SELECT 1 emp_id, 'John Smith' emp_name FROM DUAL UNION ALL
SELECT 2 emp_id, 'Steve Jobs' emp_name FROM DUAL UNION ALL
SELECT 3 emp_id, 'Larry Allison' emp_name FROM DUAL
SELECT emp_id, emp_name
FROM mydata;
after executing the above query the o/p I am getting is in the normal format like EMP_ID and EMP_NAME
not according to my requirement like
Emp Emp
Id NameWhat are the results you reaally want? Do you want this?
` EMP_ID SPLIT_NAME
1 John
Smith
2 Steve
Jobs
3 Larry
AllisonIf so:
SELECT emp_id
, REPLACE (emp_name, ' ', CHR (10)) AS split_name
FROM mydata
;The results above are 3 rows, not 6.
What results would you want if emp_name contained 3 or more words? For example, if you add this to the sample data:
SELECT 9 emp_id, 'Aung San Suu Kyi' emp_name FROM DUAL UNION ALL -
Please help me to find the table for fields where the descriptions are give
please help me to find the table for fields where the descriptions are given below
Customer Support Administrator
first line Support indicatorYou could also try table DD01T. In se 16,put in the description thats needed,you will get to know the respective data elements.
Then you can use DD03L to find the respective table. This would work if the data element is not generic.
Regards,
Anubhav. -
need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?
Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing. -
My mobile phone is lost, please help me to find the serial number is: DNQKDBS8F8H4, my name is Yu Fan, thank you very much for this is my number: 15052995201
We're not Apple here. We're users. We cannot locate your phone any more than you could locate ours.
If you did not have find my phone activated on your device, there's no way to track it. -
Please help me to find the sample code and schema for GetDBDateTime.zip fil
Please help me to find the GetDBDateTime.zip and Guest_Book.zip files.
Tks!Does this Help?
http://www.oracle.com/technology/sample_code/products/ias/files/psp/GetDBDateTime/Readme.html
Did you install Oracle9iAS ? -
How to get rid of Apple Support Community notices? my box is full as I receive thousand of messages a day. I cannot handle it anymore, please it is urgent. Help! I have Mac OS X 10.7.5 and unable to find the "notification tab" in my "preferences" I need a image if possible to better understand. Thanks a lot.
Thank you, but I just tried everything you said, my apple id account (icloud) continues and still is receiving the email from ASC each second. My i phone and macpro (i cloud account) is full of messages that I have difficult to erase at once. I have to do it one by one which can take me the whole day. How can i unsucribe from ASC, just get ride of my account, I mean cancel the ASC account, so I will not get any messages. Please help. Thanks.
-
Please help me to find the drivers/software for SB Surround
Hi all!
Does anyone know how to find the drivers fo the SB Surround 5. external sound card?
Since the HW looks quite similiar to the LIVE 24bit external I tried to install the drivers for it but they didnt work.
I can not find the SB Surround 5. card in the auto update section.
Thanks in advance/BartekHere is the link
http://support.creative.com/downloads/download.aspx?nDownloadId=0588
The driver suite gives you all the software, plus the newest driver.
Unfortunately, creative still hasnt listened to us and has not given us DDL. There was no real need to waste 60 bucks on this thing, if all it does is increase sound quality a tiny amount. When I saw the device I, along with many other customers, came to believe that it would allow for surround sound music. However, the device only outputs media that is already in surround sound, as 5. . I have tried AC3 filter, kx driver (wont work) , rednoreck (no asio) , and tons of random plugins for winamp. I have no idea how to get stereo upmixed to 5. with the spdif out on this card. I am going nuts because of this. If anyone knows how to do that please let me know !? -
Please help
But still its a disadvantage. Suppose my phone is in sleep mode and i get a chat message or some email. I wont get it at that moment, but after turning on my wifi manually, i'll receive the message. Dont you think its irritating?
-
Please help me to find the problem in this Query
hi
This is my xml structure,
<?xml version="1.0">
<rss version ="2.0">
<channel>
<Lgs>
<Lg>
<Fid>16447</Fid>
<Fname>Sam</Fname>
</Lg>
</Lgs>
<Lgs>
<Lg>
<Fid>206</Fid>
<Fname>David</Fname>
</Lg>
</Lgs>
<Lgs>
</channel>
</rss>
I need to limit the results ie, at a time retrieve only "10" results , also that should be ordered by node "Fid".
I am using PHP-API
and following query is i have used...
$query = "let $hits := (for $hit in collection('gview.dbxml')/rss/channel/Lgs/Lg order by $hit/Fid return $hit) return subsequence($hits, 1, 10)";
$results = $mgr->query($query);
getting the error,
Fatal error: Uncaught exception 'xmlexception' with message 'Error: syntax error, unexpected :=, expecting <end of file> [err:XPST0003], <query>:1:8' in /usr/local/apache/htdocs/add_loc_file.php:99 Stack trace: #0 /usr/local/apache/htdocs/add_loc_file.php(99): xmlmanager->query('let := (for i...') #1 {main} thrown
Message was edited by:
user647571The "$hits" in your string is being interpreted by PHP as a variable reference and substituted out before DB XML gets the query.
John -
Please help me to find out solution to following problem
create or replace procedure load_prod_dim
is
cursor c2 is select p.productid,p.productname,p.unitprice,c.categoryname,s.companyname from products p
join categories c on p.categoryid = c.categoryid
join suppliers s on p.supplierid = s.supplierid;
type c2_prod is table of c2%rowtype index by pls_integer;
type typ_prod_dim is table of product_dim%rowtype index by pls_integer;
p_dim typ_prod_dim;
p_dim_up typ_prod_dim;
c1_var typ_prod_dim;
k number := 1;
m number := 1;
flag number := 1;
y number := 1;
j number := 1;
v_sdate date := to_date('1-Jan-1995','DD-MON-YYYY');
v_edate date := to_date('31-Dec-2050','DD-MON-YYYY');
begin
select * bulk collect into p_dim from
(select * from product_dim order by eff_start_dt desc);
if p_dim.count = 0 then
dbms_output.put_line('Insert all rows in the table...');
for i in c2
loop
select Product_Seq.nextval into c1_var(k).seq_id from dual;
c1_var(k).product_id := i.productid;
c1_var(k).product_name := i.productname;
c1_var(k).list_price := i.unitprice;
c1_var(k).category := i.categoryname;
c1_var(k).supplier_name := i.companyname;
c1_var(k).eff_start_dt := v_sdate;
c1_var(k).eff_end_dt := v_edate;
k := k + 1;
end loop;
forall i in c1_var.first..c1_var.last insert into product_dim values c1_var(i);
else
dbms_output.put_line('Inside the else part..');
for i in c2
loop
for j in p_dim.first..p_dim.last
loop
if p_dim(j).product_id = i.productid
and p_dim(j).product_name = i.productname
and p_dim(j).list_price = i.unitprice
and p_dim(j).category = i.categoryname
and p_dim(j).supplier_name = i.companyname
then
flag := 1;
exit;
else
if p_dim(j).product_id = i.productid then
p_dim_up(y).eff_end_dt := sysdate - 1;
p_dim_up(y).seq_id := p_dim(j).seq_id;
flag := flag + 1;
y := y + 1;
exit;
end if;
end if;
end loop;
if flag != 1 then
select Product_Seq.nextval into c1_var(m).seq_id from dual;
--c1_var(m).seq_id := Product_Seq.nextval;
c1_var(m).product_id := i.productid;
c1_var(m).product_name := i.productname;
c1_var(m).list_price := i.unitprice;
c1_var(m).category := i.categoryname;
c1_var(m).supplier_name := i.companyname;
c1_var(m).eff_start_dt := sysdate;
c1_var(m).eff_end_dt := v_edate;
m := m + 1;
end if;
end loop;
forall i in p_dim_up.first..p_dim_up.last
update product_dim set eff_end_dt = p_dim_up(i).eff_end_dt where seq_id = p_dim_up(i).seq_id;
forall i in c1_var.first..c1_var.last insert into product_dim values c1_var(i);
-- forall i in p_dim_up.first..p_dim_up.last update product_dim set eff_end_dt = p_dim_up(i).eff_end_dt where seq_id = p_dim_up(i).seq_id;
end if;
end;
show err
Error in procedure are:
@load_prod_dim.sql
Warning: Procedure created with compilation errors.
Errors for PROCEDURE LOAD_PROD_DIM:
LINE/COL ERROR
98/3 PL/SQL: SQL Statement ignored
98/39 PL/SQL: ORA-22806: not an object or REF
98/39 PLS-00382: expression is of wrong type
98/39 PLS-00436: implementation restriction: cannot reference fields of
BULK In-BIND table of records
98/77 PLS-00382: expression is of wrong type
98/77 PLS-00436: implementation restriction: cannot reference fields of
BULK In-BIND table of records
Edited by: 958621 on Dec 11, 2012 3:31 AMI didn't go through your unformatted code, but a brief search on google for PLS-00436 revealed this:
http://www.oracle-developer.net/display.php?id=410
cheers -
Clarification Regarding Logical System Names
HI all,
I read the blogs regarding Logical System Name, even I am having the some problems in my system.
For PI system client is 100.
R/3 System Client is 100 is created.
IN PI when I checked the sale->basic setting-> LOgical Settings-> Assign Logical Systems
I found there is only one client 100, and it is having the same logical system name as 'PICLNT100'.
In SLD one Business System is created for Client 100 and having the Logical System Name is 'PICLNT100'.
When I checking in the R/3 system that logical system Name ('PICLNT100') is not there and for r/3 client 100 having the different logical system name.
IN ID when I found the Goto ID->File Buinsess system and Menu ->Services->Adapter Specific Identifiers->Logical Ssytem,
It is different from the SLD logical System Name.
How Can I know in PI, that Logical System is belongs to r/3 or PI client 100,
when I running the sceanrio it is giving error as ATTRIBUTE_INV_SND_SERV while doing the file to Idoc scenario.
How I have to maintain the logical system names in this case?
please help me in this.
Regards,
Sreehi.
each r3 system has his own SLN (PI,BI,ECC,etc). this name identify each R3 sytem.
http://help.sap.com/saphelp_nw04/helpdata/en/78/217dc151ce11d189570000e829fbbd/frameset.htm
IN ID when I found the Goto ID->File Buinsess system and Menu ->Services->Adapter Specific Identifiers->Logical Ssytem,
to export data of your R3 system to SLD, just do it from TCODE RZ70 in your r3 system, not PI.
once you configure it all data from r3 system is exported to SLD.
if the SLN does not match in Adapter Specific Identifiers->Logical Ssytem, edit the Bussines System (press in the little pencil) go to Adapter Specific Identifiers->Logical Ssytem and prees in the little hand icon. in the SLN in not refresh, go to menu enviroment--> CLEAR SLD DELTA CACHE. and repeat the steps before.
each time you send data to an R3 system and the sender system is a legacy. in your receiver communication channel>header mapping>sender system--> select the PI Bussines system and try again.
hope its helps
Rodrigo
PD: rewards points if useful -
Please help me to find out the solution..​.plz
question-"fourier series coefficents of a square wave using gibbs phenominon"
i have tried this problem so many times to find the solution but i can not find find it.it shows a data type problem.
plz help me sir to draw the circuit properly...plz
i am sending my program to you...plz check it and give me some suggestions..i am very thankful to you.
Attachments:
try_fourier1.vi 847 KBHi
The Templates are in this path
For OCDT the path is C:\Program Files\SAP\Data Transfer Workbench\Templates\Templates\Administration\Setup\Banking\Credit Card Payment
For sample template ODSC it is in C:\Program Files\SAP\Data Transfer Workbench\Templates\Samples\1. Add New Data\Administration\Setup\Banking\Banks
like the way u can see all the set up banking templates in this path
C:\Program Files\SAP\Data Transfer Workbench\Templates\Templates\Administration\Setup\Banking
Regards,
Sudhir B.
Edited by: B.sudhir on Dec 13, 2011 11:13 AM -
Why doesn't my iPhone 4 have an 'Internet tethering' options? Is it carrier related or iOs related? Please help me find the solution for this. thanx
Personal Hot spot
http://support.apple.com/kb/HT3574
Understanding
http://support.apple.com/kb/HT4517
Trouble Shooting
http://support.apple.com/kb/TS2756 -
Can anybody please help me to find out the link where small co.
can anybody please help me to find out the link where small companies implementing saps.
Hi,
SAP is providing a solution to Small Scale Industries with SMB (Small and Midsize Business) Product for various industries. It's a Pre configured SAP Solution pertaining to a specific industry(like Pharma, Oil..etc) with which the implementation as well as the cost will also decreases.
Regards,
Jayaram...
Maybe you are looking for
-
Hello, we realized single sign on on our mac machines. It runs great. Now i want to combine it with our SAP logon groups. There's an error that he cannot find the KDC. Where's the problem? Is it nit possible to combine groups with using snc? We set t
-
Spotlight search not appearing in ios7 when swiping down
The spotlight search box is supposed to appear in IOS7 when you swipe down on the home screen or within apps, but it doesn't. When I swipe down, I get the notification centre and that's all. In my settings- general - spotlight search, all apps shown
-
Things that Pages can do and Word can't
It seems to me that a fair number of posts are from people who expect Pages to do everything Word does. But Office has been around for a long time and is considerably more expensive. It would be nice if Peggy and a couple other experts could point ou
-
Unble to access the JNDI server in J2EE 1.4 RI ...
Hi, the following code can be used to access the JNDI "server" included in the J2EE 1.3 RI, from a client placed at anywhere (you also must include the j2ee.jar in the classpath at runtime) : Hashtable env = new Hashtable(); env.put(Context.INITIAL_C
-
I'm trying to create a time lapse of 1170 images I took during the Geminid meteor shower. I edited all the files in Lightroom v4.3 with the Catalog Settings set to "Automatically write changes into XMP" selected. Lightroom created all the necessary