Please help me to get the wireframe component scroll bar to actually scroll??

I can't seem to figure out how to get this working?? I have a page that is long and needs scrolling capabilities.   Blargh.
Gina

Hi RemsX,
I'm glad you found some steps that worked for you, but you should be able to set up a scroll panel more easily without those strange extra steps.  Try the following:
Draw a few rectangles (say, 5) arranged in a vertical stack.
Place a wireframe Vertical Scrollbar to the right of the rectangles.
Select everything and Convert to > Scroll Panel
Double-click to edit the Scroll Panel
Select all the boxes -- but not the Scroll Bar, and Convert to > Scrolling Content
You should now see a dotted-line bounding box surrounding the rectangles.  Drag the bottom of the dotted-line box upwards, so that the bottom one or two rectangles are hidden (clipped).
File > Run, and verify that dragging the scroll bar causes the stack of boxes to scroll.
Does that work for you?  You shouldn't need to convert anything to a generic component or graphic, or place the scrollbar inside the content...  If you're having trouble with the above steps, please post back with details about which step didn't work out and we'll try to help more...
- Peter

Similar Messages

  • Please help me. i get the following error " error getting license, server communication problem, E_ADEPT_DOCUMENT_TOO_SHORT

    HI,
    I am using this for the first time. I have downloaded a Adobe E-book from my library. I installed Digital Edition 4 and i keep on getting this message when i try to get the book from my pc downloads. Please help me overcome this issue
    regards,
    kapil desai

    Please try de-authorizing and authorizing again.
    Steps to De-authorize
    1) Switch to Library Mode by clicking Library button
    2) Select menu item Help--> Erase Authorization or Press Ctrl+Shift+D
    3) Click Erase button to De-authorize
    Steps to Authorize
    1) Launch ADE
    2) Switch to Library Mode by clicking Library button (if you are in Reading Mode)
    3) Select menu item Help-->Authorize Computer or Press Ctrl+Shift+U
    4) Enter the valid credential to Authorize
    Hope this solves your problem.

  • Please Help: I cannot get the Airport Extreme settings right with AT&T DSL

    AT&T Motorola 2210 DSL Modem.
    I have tried both bridged on/off and different configurations on the Airport Extreme, but I cannot get online. I am out of ideas. I called AT&T tech support and because it's not one of their wireless routers, they wanted to charge me to troubleshoot, ridiculous.
    Please help

    If you find that the Double NAT setting will not allow the PS3 to connect correctly, your only other option is to change the configuration of the modem to either +PPP on the computer+ or +Bridge Mode+ and then configure the PPPoe service on the AirPort Extreme.
    I assume that you have already set the modem up using the default IP address of 192.1681.254 (I think this is it). You'll need to locate the page to change the settings and it will probably have a red warning sign on it. Either PPP on the computer or Bridge Mode will work. Update to save settings.
    Then under the Internet icon in AirPort Utility:
    Connect Using = PPPoE
    enter your user name (probably your email address with the service provider)
    enter your password
    Leave the Service Name area completely blank
    Connection = Always On
    Disconnect if Idle = Never
    Update to save settings.
    That will eliminate the Double NAT issue and the PS3 should get a clear indication. As I said, when you have the PPP connection on a device other than the modem, you may see an occasional drop and restart of your connection. That seems to be a fact of life with this type of setup.

  • Please help - Unable to get the cluster database home page

    I have both the RACDB1 & RACDB2 instances running (and the 2 listeners also) . But I do not get the the cluster database home page. Instead I get startup/shutdown page. EM later confirms both instances are up.
    But how do I connect to the RACDB database to perform any admin work from within EM ?
    Any help is appreciated.
    Thank you.

    Ehm. Before placing? At that point ID doesn't know anything at all about the PDF.
    var myPDFFile = File.openDialog("Choose a PDF File");
    myPDFFile.execute();
    Then check the lower left bottom -- it should display the page size.
    Why not first place the file and then check its size? You can always move it to the right position after placing.
    Oh, by the way: "a PDF" doesn't have a "page size". Each single page in a PDF can have a page size of its own.

  • Please help, i cannot get the CD out of the drive! thanks

    I was adding music to iTunes with some CDs, I am not able to get the CD out now, the eject selection is grayed out so i am not able to use it.....how do i get the CD out?!!

    Quit iTunes. Then you can drag the CD icon to the Trash.

  • Could someone please help me with getting the sabnzbd daemon to start?

    Hi everyone,
    I'm a classic newbie.  I managed to follow some instructions I found on the web to get sabnzbd to install (via Yaourt), and when I invoke it from the command line, it works fine.
    I've read that you can get it to start as a daemon, which would be really good.  Could someone please explain how this should be done?
    Where do I need to put the sabnzbd.init file?
    What about the sabnzbd.confd file?
    I'm okay enough with adding sabnzbd to the /etc/rc.conf file, but I can't quite configure it so that the necessary files are in place to start it.
    If you need any details of my setup, please let me know.
    Thanks heaps,
    Luke

    birdie101 wrote:Where would I find a good place to describe how to install programs using PKGBUILDs?  and what that process is actually doing?
    Apart from the wiki article on ABS, always look at the pkgbuild when in doubt. This is also helpful when you want to know what compile arguments are passed to GCC. Custom postinstall commands are run through .install file (example what is displayed after installation), this is generally foo.install in the AUR for a pkg named foo. And most importantly, familiarize yourself with compiling process, and Arch specific routines like a daemon should be defined in /etc/rc.d/, instead of /etc/init.d/ in other linuxes.
    Edit: A best exercise would be to create a pkgbuild yourself. Arch always recommends community contributions.
    Last edited by shemz (2010-09-24 08:08:14)

  • Please HELP me with getting the right version of Adventure Works database

    Hi,
    I have SQL SERVER 2008 R2 installed with me. And i have downloaded 'AdventureWorks2008R2_Database' from msdn links only.
    It is running fine. 
    Now the practise material i have with me is where employee table have columns precisely as in this link here 'http://technet.microsoft.com/en-us/library/ms124432(v=sql.100).aspx'. And the version which i downloaded and using doesnot have these.
    So need help with actual version which would have all these columns. 
    Thanks

    Hello,
    That's link is to the documentation of Version 2008, in Version
    2008 R2 the design has changed a little bit. Download the example for version 2008 is you Need exact that table design.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Please help me to get the website design in exact fit

    Hi,                           
    I developed a website that is 1280x840 and a few user had smaller screens were having problem checking the site in noscale mode. Now i set it to exact fit, but all the external movie clips are getting distorted, so what i was wondering is, if you have any sample codes that will resize those movie clips keeping its scale proportions, or if you have any other suggestions on what to do?
    Kind regards and thanks in advance for your replies...... 
    Nirmalatha

    Ehm. Before placing? At that point ID doesn't know anything at all about the PDF.
    var myPDFFile = File.openDialog("Choose a PDF File");
    myPDFFile.execute();
    Then check the lower left bottom -- it should display the page size.
    Why not first place the file and then check its size? You can always move it to the right position after placing.
    Oh, by the way: "a PDF" doesn't have a "page size". Each single page in a PDF can have a page size of its own.

  • HT204088 Hello. I can't log into iTunes Store. I made a purchase this morning for gold in csr classics and it charged my card twice. Can you please help me either get the gold for the game or recredit it back to my card.

    Hello there
           We also looked at the account for other purchases over a year ago or less and they had charged my card twice for the same purchase. They said they would let me know and I haven't received an email to confirm. It did it today also I purchased 9.99 of gold on the csr classic racing and it didn't give me the gold so I did it again and it gave me the gold. When we called our card company it was charged twice. And help would be great. Thank you.

    If you haven't received the item, or if you've been overcharged, then try the 'report a problem' page to contact iTunes Support (these are user-to-user forums) : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Please help! I get the message ALERT: Error verifying class MyCnavas

    Hello, I'm Trying to work on a gaming project in j2me. For which first of all, I'm trying to create a menu using the low level API. I tried the following program to see if my idea works. I tried to add in the menu items by calling g.drawString inside a for loop in the paint method. Then I've used the drawRect to draw a highlighting rectangle around the first menu item. It compiles and preverifies successfully, after which it gives me the error while running:
    ALERT: Error verifying class MyCnavas
    import javax.microedition.midlet.*;
    import javax.microedition.lcdui.*;
    class MyCanvas extends Canvas
         private static final int DOWN = -2;
         private static final int UP = -1;
         Graphics g;
         int itemposition = 0;
         public MyCanvas()
              super();
              repaint();
         public void paint(Graphics g)
              this.g = g;
              int pos=0;
              for ( int i =1; i<3;i++)
                   pos = i*20;
                   g.drawString("Option".concat(String.valueOf(i)), 20,pos, Graphics.TOP|Graphics.LEFT);
              g.drawRect(15,pos-5, getWidth()- 50, pos+5);
         public void keyPressed( int keycode)
              System.out.println(keycode);
              //if ( keycode == UP)
    public class MyMIDlet extends MIDlet
         MyCanvas can;
         Display display;
         public MyMIDlet()
              can = new MyCanvas();
         public void startApp()
              display = Display.getDisplay(this);
              display.setCurrent(can);
         public void pauseApp()
         public void destroyApp( boolean unconditional)
    }Any help on this issue will be greatly helpful
    Regards
    Rahul

    No, I am using the default emulator provided by the sun midp 2.0 specification. I am executing the program on the command prompt. I am not using the wireless tollkit provided by sun.
    I already tried removing those declarations of UP and DOWN, which are quite unnecessary I understand. and I tried removing the repaint call in the constructor. It still gives me the same problem.
    I am not able to figure out what the problem could be. ANy help on this would be appreciated
    Rahul

  • Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my pass fail

    Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my passcode is failed

    The passcode you need to enter is the passcode you set on your device. It is the passcode that you enter when you turn on your iPad or awaken it from sleep after and Auto lock.
    If you do not know or remember your password and did not store it somewhere then you will have to restore your device.
    http://support.apple.com/kb/HT1212

  • My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

    My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

    Sorry i mistakenly made this question. It was alright. No Problem At ALL

  • Can anyone help please. how do i get the home button to appear on the touch screen my home button has stopped working?

    can anyone help please. how do i get the home button to appear on the touch screen my home button has stopped working?

    I have same problem.
    However, I am unable to turn on Assistive Touch.
    At one time I was able to activate it, but it went away and now I cant reactivate.
    What is the solution?

  • I want to check the main diffrence in Pop up block enabled and disabled.But,i don't get any difference.Would u please help me to understand the difference using one practical example of website

    I want to check the main diffrence in Pop up block enabled and disabled.But,i don't get any difference.Would u please help me to understand the difference using one practical example of website

    Here's two popup test sites.
    http://www.kephyr.com/popupkillertest/test/index.html
    http://www.popuptest.com/

  • I have iOS 6 on my iPhone. i have linked my contacts with facebook and yahoo, which has doubled or triplicated some of the contacts. how can i integrate them into one? please help. it is getting on my nerves. thanks :)

    I have iOS 6 on my iPhone. i have linked my contacts with facebook and yahoo, which has doubled or triplicated some of the contacts. how can i integrate them into one? please help. it is getting on my nerves. thanks

    click on the contact which you want to integrate, click the edit button scroll down u will find a option called link contacts use it to link it to the duplicate contact

Maybe you are looking for