Please help me to know the tables which contain details of APD and Open hub destination

Hi experts,
I need to know the list of APDs that have been created in our system. So can you please let me know the table name (if there is any) which contains the name of the APD and as well as the status (active / inactive) of the APD.
Thanks ,
Shalini

Hi Shalini,
Go to RSANWB T-code and select any analysis process. Then press the "monitor" button. On the monitor screen, you can see the selection criteria in a table on the right. Now double-click on the table and a popup will come up where you can set the selection criteria. in particular, you can set the time frame and the analysis process selection.
Hope it 'll help you..........
Regards,
Mukesh

Similar Messages

Please help me to know the answers

Hi ALL,
Please help me to know the answers
What is the role of the container element in BPM?
What is the difference between Idoc and RFC adapter ? How to decide which one will be used?
How to restart the adapter engine or J2ee engine?
What is the role of wndows1 and windows2 in SXMB_MONI?
Is it possible to see the message after mapping ?If it is possible how to check?
Regards,
Somenath

Hi somenth,
What is the difference between Idoc and RFC adapter ? How to decide which one will be used?
A)in case of sender idoc means Sender IDOC adapter need not be configured because IDOC adapter
lies in ABAP engine - IDOC adpter resides in Integration engine.
Incase of receiver, whatever is the adapter, you need an adapter configuration and receiver
agreement - from the IE, the xml msg need to be sent to pipeline of idoc adapter,
so you need a recever agreement......
IDOC #
Idoc Adapter: The next most commonly used adapter is Idoc adapter for sending and receiving Idocs from SAP XI.
The foremost step before configuring the idoc adapter is the system settings that have to be done
Details:
In the case where we encounter a standard IDOC provided by SAP or Situation where a mapping is available or
an IDOC as well as a BAPI exits, the approach will be dependent on the specific integration scenarioo......
for For example, options might be
1) sending one IDOC at a time
2) combing multiple IDOCS and sending as a single IDOC.
3) making one single RFC call, for each business transation.
4) avoiding multiple calls to the same BAPI / RFC by deploying a wrapper BAPI and sending all records in one call.
5) Using the proxy and sending all data in one shot and making single calls to the BAPI from the proxy.
proxy and rfc adapter #
a proxy on the SAP application system should be used while interfacing with a standard BAPI or remote enabled
function modules on the application system. the proxy will be invoked by SAP PI/XI and on the application system
the proxy will call the BAPI. in SAP systems with WEB AS versions <6.20 the proxy option is not available and hence
the RFC adapter should be used insted.
Disadvantage:
pre-built meta data and the mapping that SAP delivers will not be usefull as the BAPI is wrapped with a proxy.
so if the pre-defined integration content is not taken into account the proxy should be used insted of configuring
the RFC adapter and calling the BAPI / RFC
Advantage:
it bypasses the adapter engine and directly interacts with the application system and integration engine thereby
enchancing the performance
2 )What is the role of the container element in BPM?
A)The workflow container contains an element which is defined with a data type reference to the same object type that is created in the referenced task, this binding definition is proposed automatically when an activity is defined.
If no element with an appropriate data type reference is available in the workflow container, a suitable element is added to the workflow container and the binding entered.
Defines the data for a business process and to enable data to be transferred between the individual steps of the business process.
consists of an unlimited number of container elements.
Container elements ( Variable declaration)
Consists of a name to address data in the process
Can be typed to
*Simple XSD ypes :XSD:data,XSD:time,XSD:integer, XSD:string.
*Abstract interface
*Receiver
*Can be multiline ( a vector of the types above)
3)How to restart the adapter engine or J2ee engine?
SMICM
4)What is the role of wndows1 and windows2 in SXMB_MONI?
Window1 and window2 will get you the message payload
we can check the messages in SXMB_moni
regards
srinivas

Please help me to find the table for fields where the descriptions are give

please help me to find the table for fields where the descriptions are given below
Customer Support Administrator
first line Support indicator

You could also try table DD01T. In se 16,put in the description thats needed,you will get to know the respective data elements.
Then you can use DD03L to find the respective table. This would work if the data element is not generic.
Regards,
Anubhav.

Optimise query on the table which contain 1000 column

Hi ,
I have query on the table which contain 1000 columns
when i am executing query on same table .It is taking time .
Select * from abc
where col1 between start_date and end_date ;
abc table contain 1000 columns.
please tell me how to optimise query

Yeah, that was my thought as well ... 1000 columns? wtf?
I can't think of many reasons for why you'd need to do a select * on it, and the scenarios that would require that are better addressed at the DBA level, perhaps using db replication and the data pump, etc. So to start with try selecting just the data you would need.
One thing you can do right off the bat is to partition that table by date, and also to analyze and run statistics on it (this was a nightly operation at my last job).
You can also create a materialzed view that refreshes overnight, just on the slice of the data you need. Use a forced fast refresh to make it current before you use it.

Which 3rd party tools can support Open Hub Destination?

Hi BI experts,
In the Open Hub Destination Type, I have a choice between Database Table, File or Third Party Tool. From what I read from SAP documentation, the Third Party Tool which is supported is Ascential. Apart from Ascential, what are other 3rd party Tools can Open Hub Destination link up to ?
Can Microsoft BI be linked up?
Please let me know.
Thanks,
Anthony

Hi Anthony,
Yes, SSIS can be used with Open hub.
Refer to below mentioned link:
[Using SQL Server 2008 Integration Services with SAP BI 7.0|http://msdn.microsoft.com/en-us/library/dd299430.aspx]
Regards
Hemant Khemani

What's the difference between Infospokes and Open Hub Destination in BI 7?

I understand the API that a 3rd party tool uses to get data our of BW using infospokes. Is it the same API that a 3rd party tools such as MS-SSIS uses? Supposedly that software only communicates with an OH Destination and not Infospokes. So apparently is does use a different API. If that's the case, where can I find documentation on that API for OH Destintations?

Open Hub Destination (OHD) replaced InfoSpokes as of BI 7 SPS 6, for Open Hub Service. Existing InfoSpokes can be used still, but it's recommended that any new retractions be created as an Open Hub Desitnation, because it exposes more functionality (e.g. Transformations and functionalities with DTPs).
Here's a document on [Open Hub Service - 3rd Party Integration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/com.sap.km.cm.docs/library/icc/bw-ohs%20open%20hub%20service%2c%20third-party%20integration.pdf] (see Page 7). Hope this helps.
Edited by: Dennis Scoville on Aug 3, 2009 1:45 PM

Please Help me in giving the tables of PS Modules?

Hi all,
Please Give me all PS module Tables. And especailly the table where the total cost of that Particular WBS element are stored?
Thanking you all in advance,
SAP ABAPer

Hi,
This is the 'official' list of tables for queries in PS:
<b>Master Data:</b>
PROJ Project definition
PRPS WBS elements
PRTE Scheduling data
PRHI WBS hierarchy
AUFK Orders/networks headers
AFKO Production Orders/networks
AFVC Network activities
AFVU Network activities
AFVV Network activities
RESB Network Components
MLST Milestones
<b>Transaction data and totals:</b>
RPSCO Project info database (cost, revenues)
RPSQT Project info database (quantities)
COSP Cost totals for external postings
COSS Cost totals for internal postings
COSB Total variances/result analysis
COEP Line items, actuals
COOI Line items, commitments
COEJ Line items, planned orders
BPGE Budget, overall cost
BPJA Budget, annual values
QBEW Project stock valuation
MSPR Project stock (incl. non-valuated)
<b>Refer the link for table realation:-</b>
http://www.erpgenie.com/sap/abap/tables_ps.htm
http://www.sapgenie.com/abap/tables_ps.htm
Regards
Sudheer

Please help me to create the table

How may Long column will create in the table
any restriction on this

Longs are deprecated. Oracle actively discourages using long in any new application, in part because there are huge deficiencies. Better to go with LOB (CLOB, BLOB or BFILE) if at all possible.

Tables which contain details about queries

Hi All,
I would like to know the database tables which hold information about queries like structure, fields, Query elements etc. Thanks in advance
thanks & regards
satish murthy d.s

try RSZCOMPDIR ??
have a look at tables: rsrworkbook , rsrw*
Re: Where-used list of an attribute (either display or navigational)
Also try : RRMX_WORKBOOK_QUERIES_GET
Re: Query Detailes
Re: Query-InfoObject - Tables
Re: Query Issues
Re: Workbooks - Where-Used
assign points if useful ***
Thanks,
Raj

Please help : how to know the caller ?

Hi,
suppose servlet 'C' can be called by servlet 'A' and servlet 'B'.
How can servlet 'C' know by which servlet it has been called ? Is there something foreseen in HttpServletRequest ?
Thanks,
Javamad.

If it needs to know that -- and in a good design it should not need to know that -- you could store something in the session object to indicate it.

Please help - Getting to know the Hardware-Revision of an T60p

Hi there! I own an T60p,like it very much cause of WUXGA and Flexview an would like an Dealer to upgrade the processor cause of my needs.
Thinkwiki told that core2duo are only possible if the mainbord comes from Hardware-Revision 3. I am afraid I dont know if this is the case. How can I see if this is the case? Thanks

i would like to know if there is any way without Java web start.
it has to be set manually.
i.e every user should make this entry in the server.xml so that the context is set.

I have iphone 4 ios 6.1.3. My wifi disconnects everytime i lock my phone. Please help if you know the solution

Please help

But still its a disadvantage. Suppose my phone is in sleep mode and i get a chat message or some email. I wont get it at that moment, but after turning on my wifi manually, i'll receive the message. Dont you think its irritating?

Name of the Table which contains Debit Credit Fields

Hii all,
I have to calculate the net amt of sales performed by all sales offices of my company. i have to take Debit n credit field. Which table should I refer to get these fields ?
Regards
Shubhra Tiwari
Edited by: shubhra tiwari on Feb 18, 2008 7:14 AM

Hi,
In table LIPS, you have the field CMPRE_FLT for item credit price.
Reward if Helpful.

I am trying to center my content, but the Divs (which contain my spry menu and logo) will not center

I have two Divs (there will be more in the future) that I am trying to center together on my page, but when I use the #wrapper code I have seen and a div tag, nothing changes.
This is my HTML code
<body>
<div id="wrapper">
<div id="Logo"><img src="Backgrounds/Color-War-Logowhite.png" width="250" height="250" alt="The Color War"></div>
<div id="MenuBarDiv">
    <ul id="MenuBar1" class="MenuBarHorizontal">
      <li><a href="#">Home</a>    </li>
      <li><a href="#">About</a></li>
      <li><a href="#">FAQ</a>    </li>
      <li><a href="#">Registration</a></li>
      <li><a href="#">Contact</a></li>
    </ul>
</div>
<div id="Home-Splat"></div>
<div id="About-splat"></div>
<div id="FAQ-splat"></div>
<div id="Registration-splat"></div>
<div id="Contact-splat"></div>
<p> </p>
</div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
and this is my CSS
#wrapper {
          width: 960px;
          margin-right: auto;
          margin-left: auto;
I am new to dreamweaver and webdesign and can't figure this out.
Can anyone help me with this?

You're welcome
Find any hosting you can
http://www.w3schools.com/css/

Find table which contains "job name" and "Mail sent to users"

Hi Folks,
I have a requirement whenever I run a job(xyz), it send mail to users, Can you please let me know the table which contains both job name and successfully mail sent to users.
Thanks in Advance.
Lakshmi.

Hi,
You can find the job name in TBTCJOB.
Regards,
Ravi
Note : Please mark the helpful answers

Please help me to know the tables which contain details of APD and Open hub destination

Similar Messages

Maybe you are looking for