Please help me to solve screen shot errors...
HI All,
Please find the attached screen shot.
Please assist me to solve screenshot errors.
I am really struggling to solve errors.
Thanks for your help in advance.
Regards
Durai S
Attachments:
Screen shot.PNG 40 KB
Thanks for your reply.
After adding <windows.h>, the redeclaration and redefinition errors are resloved, but i am facing new errors.
Please see the attached file for error screen shot.
Thanks for your help in advance.
Regards
Durai S
Attachments:
Missing prototype.PNG 19 KB
Similar Messages
-
ýesterday my iphone 5c screen suddendly shows connect to itune and i try to restore it using itune but halfway i got a message error occured (14). please help me in solving this problem.
what did you learn when you search the internet for iPhone error 14?
-
Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks
As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.
-
Please help me to solve error: Split mapping created no messages
Hi Experts,
I am facing Split mapping created no messages when i run my scenario.
My Scenario is : Proxy to FILE.
I am triggering Proxy and based on one condition i am generating different Flat Files.
Now when i do this i am getting error :Split mapping created no messages in SXI_MONITOR.
When i check this in Message Mapping by taking data from SXI_MONI its working fine...
but when i trigger the data from RUNTIME WORKBENCH its throughing the error.
When i remove the NameSpaces <ns0:message>
and <ns0:messages1> its working fine.
How can i solve this issue.
Even though i removed Namespace in Message Type, i am getting the error.
I changed occurance of Target message to O..unbounded both in Message Mapping and Interface Mapping.
Its working fine in Message Mapping, problem occurs only when i run end-to-end scenario.
So please help me to solve this issue.I think there might be mismatch between your name spaces.
may be this link might help you
Split mapping created no messages -Mluti Mapping
are you getting the same structure from your proxies whatever structure you have in your XI structure(sender) and NS should match.
but I dont have exp with proxies.
Sri -
i can not connect my i phon with my pc it shows athorised computer when i am trying to do authorised process the process done but again i connect my phon again show this errore please help me to solve my prob....
I have clicked on the connect button, but it brings up the same There is a problem connecting, and I have also tried SMB://
i tried pinging the ip address with in termial and it times out.
From my windows PC and I can access my MacBook Air just fine, -
Please help me to solve the problem ---it's urgent
hi everybody
my application is deployed on the weblogic 9.0. I am using the VB DLL through which i am sending the request to the servlet.
When i am pressing the "Color" button in VBDLL to retrieve the color information, server takes the long time nearly 10-12 minutes to return back the color information but it throws the following error
<Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "621" seconds working on the request "Http Request: /sales/appFindSize.jsp", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
java.lang.Object.wait(Native Method)
java.lang.Object.wait(Object.java:474)
javelin.client.JobWaiter.blockUntilFinished(JobWaiter.java:45)
javelin.client.ClientUtilsImpl.build(ClientUtilsImpl.java:838)
weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:244)
weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:200)
weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:164)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:224)
weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:383)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:298)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3022)
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1925)
weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1848)
weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1288)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
please help me to solve this error it is urgent.
Thanks in advance
Pandurang S. PokharkarExchange rates can be entered as a direct or indirect quotation. You can maintain two prefixes that
can be used to differentiate between direct and indirect quotations exchange rates during input and
display. If you don´t set up a prefix, the standard setting is valid:
Ÿ (blank, without a prefix) for direct quotation exchange rates
Ÿ / for indirect quotation exchange rates
n Scenario 1: If you use mainly direct quotation exchange rates and indirect quotation occurs seldom,
use the default configuration. In this way you can enter direct quotation exchange rates without a
prefix.
n Scenario 2: If, in addition to direct quotation exchange rates, the handling of indirect quotation is
required, you should define a prefix that is not blank for both quotation types, e.g.:
Ÿ * for direct quotation exchange rates, / for indirect quotation exchange rates
Ÿ If you follow this suggestion, the configuration does not allow exchange rates to be entered
without a prefix, an error message occurs. Thus users are forced to consider which the correct
quotation is and enter the rate with a valid prefix.
n Scenario 3: If indirect quotation is the major notation at your company, you can configure the
settings this way:
Ÿ * for direct quotation exchange rates, (blank) for indirect quotation exchange rates
Ÿ This configuration allows indirect quotation exchange rates to be entered without a prefix whereas
the less used direct quotation exchange rates have to be entered with a prefix. -
Please, Help me my folder utilities have errors!
Please, Help me my folder utilities have errors - You can't open the application Terminal because it may damaged or incomplete.
I formatted the HD and reinstalled Snow Leopard Apple original disk that came with Macbook Pro.
I am a photojournalist and need the terminal window, please do not ask why! :-)
I have a documentary project in Brazil jungle in a few days and I am desperate to solve the problem. I don't want just now migrating to the Mountain Lion, I'd rather do it when I return from the project. I am new to the Apple world! I appreciate all help!
Thanks. Leo
AirPort Utility - You can't open the application Terminal because it may damaged or incomplete.
AppleScript Editor - You can't open the application Terminal because it may damaged or incomplete.
Audio MIDI Setup - You can't open the application Terminal because it may damaged or incomplete.
Bluetooth File Exchange - You can't open the application Terminal because it may damaged or incomplete.
ColorSync Utility - You can't open the application Terminal because it may damaged or incomplete.
Console - You can't open the application Terminal because it may damaged or incomplete.
DigitalColor Meter - You can't open the application Terminal because it may damaged or incomplete.
Disk Utility - You can't open the application Terminal because it may damaged or incomplete.
Expose - You can't open the application Terminal because it may damaged or incomplete.
Grab - You can't open the application Terminal because it may damaged or incomplete.
Grapher - You can't open the application Terminal because it may damaged or incomplete.
Java Preferences - You can't open the application Terminal because it may damaged or incomplete.
Keychain Access - You can't open the application Terminal because it may damaged or incomplete.
Remote Install Mac OS X - You can't open the application Terminal because it may damaged or incomplete.
Spaces - You can't open the application Terminal because it may damaged or incomplete.
System Profiler - You can't open the application Terminal because it may damaged or incomplete.
Terminal - You can't open the application Terminal because it may damaged or incomplete.
VoiceOver Utility - You can't open the application Terminal because it may damaged or incomplete.Welcome to Apple Support Communities.
Reinstalling from the original Snow Leopard disk probably got you a version of OS X earlier than 10.6.8.
Running Software Update multiple times MIGHT eventually fix the problem.
A Combo Update is supposed to be a complete set of all OS X files that were updated in any release of that version of OS X.
So, the Combo update is a shorter path to get the updates all at once, in one download of OS X 10.6.8 Combo Update v1.1.
http://support.apple.com/kb/DL1399
The full combo download is about 1 Gigabyte, so it will take a while.
You'll still need to download Safari v5.1.7 from this non-Apple link to get to the latest release, selecting Get Older Version for OS X 10.6.8.
http://www.macupdate.com/app/mac/15675/apple-safari -
I spent my SG$39.90 to purchsed a new version of mac lion 10.7.2. But sadly, after installed i could not open my webcam or facetime.It is very frustrating and making me very upset due to this situation.If i know like this i would never purchased the new Mac lion version!please help me to solve this problem!thanks!
You can try the following:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
How to configure Time-sheet in Project server 2013 please share the doc with screen shot
How to configure Time-sheet in Project server 2013 please share the doc with screen shot
Thanks and Regards, Rangnath MaliHi,
Please refer to the following Youtube video and article.
https://www.youtube.com/watch?v=lZWvg4q17JE
https://support.office.com/en-sg/article/Set-up-timesheets-and-task-status-672fa06f-8c4b-4e43-bfbc-4c355d681605
Please don't forget to mark it answered, if your problem resolved or helpful. -
Please please please help me to solve problem
hi everybody,
i am facing the problem when am upload the table from one system to another.i was able to import and export the applications but i was unable to import and export the tables and schemas.what i have to do? what is the procedure to do?
can anybody please help me to solve this problem.....
regards,
vally.shi chrissy,
i have exported the table succesfully, when am import the table to another schema it shows the error get block error. and also i was tried with upload the table , it is also unsuceesfull, it shows the error application id is inconsistent, can you please tell me the difference between upload and lmport in the sql workshop(you can find this in sql script page)
regards
vally.s -
i just bought iphone5 last 2 weeks.At first week i can use itune apps after these last 3 days i try to use itunes again and i couldnt open it...same as app store...please help me to solve my problem...thanks and god bless...
Thanks Jakob. You are correct.
I just finished another "experiment".
I transcode the whole clip 1,2,3,4,5,6,7 to another ext Western Digital HDD and got the Error -50 too. Problem is this ext Western Digital HDD is Daisy chained to the LaCIe.
So, I tried transcoding to another ext Western Digital HDD connected to my router. And this time NO PROBLEM.
So, I should readjust the FW800 connectors.
What do you mean by the controller of the Firewire ?
Thanks
Jakob Peterhänsel wrote:
All I'm saying is, the error -50 from the Finder normally means there is something spooky going on.
Here, the LaCie drives become unstable. In the few cases where I'v actually opened the cage and put the HDD into another mount, the HDD seems to be fine, so I suspect it's either the FW connectors of the controller itself.
If the drive is under warranty, replace it, otherwise, move your data to another drive if it startes to do so frequently.
Here, the drive will 'behave' normally for some time after a reboot of the OS, but it's a pain to reboot every X hours... -
Help me to solve msvcp80.dll error
Every time i execute any Program it shows following error. I've already reinstalled , refreshed my PC but it doesn't working. Please help me to solve this problem.
What is exact wording of your proble/error?
Check consistency of your sustem with sfc function and share your findings here (log file - upload it and publish url)
http://support.microsoft.com/kb/929833
Also read
http://pcsupport.about.com/od/findbyerrormessage/a/msvcp80-dll-not-found-missing-error.htm
HTH
Milos -
Please help me to solve the issue in my query.
Hi All,
Please help me to understand the mistake what i did in below query and help to resolve that.
Actually i am trying to create a query to filter the records from db based on my input parameter.
If my input parameter is 1(@showallrecords) then i need to show all the records which has the IsLatest as 1
If my input parameter is 0(@showallrecords) then i need to show all the records which has the IsLatest as 0
select * from tabel1 INNER JOIN tabel2
ON tabel1.KeyId = tabel2.KeyId
and (@showallrecords = 1 and tabel1.IsLatest = 1 )
and (@showallrecords = 0 and tabel1.IsLatest = 0 )
when i am executing the above query with the parameter @showallrecords = 1 ,db is returning 0 rows.If i am executing the above query after removed the last line and (@showallrecords = 0 and tabel1.IsLatest = 0 ) then records are coming.
i understand that 1=0(last line) and the condition is not true.So its affecting the result.
Please help me to solve this.select * from tabel1 INNER JOIN tabel2
ON tabel1.KeyId = tabel2.KeyId
WHERE (tabel1.IsLatest = @showallrecords Or @showallrecords=0) -
Dear , please help me to solve my problem in activating my iPhone
Where I lost it since 3 months and when found it cannot activating my ID
Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at applied.apple.com)
And try to reset my password but cannot please help me where am a poor man and cannot pay another money to solving this problem to any one
My iPhone data
Ime: ****
Model: A1332
FCC ID : BCG-E2380A
IC: 579C-E2380A
MY id at cloud ****
Password ( ****)
My country : Egypt
MY EMAIL : ****
Tell no: ****
<Personal Information Edited By Host>The following may help:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears - Apple Support
If you didn't receive your Apple ID verification or reset email - Apple Support -
Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.
Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore.
Maybe you are looking for
-
It used to be if I had more than one window open, I had to click on the hidden window to bring it to the front. Now, if my cursor slides over the hidden window, that window opens. I want to change it back because it causes a problem when typing. If I
-
Installing XP on Macbook pro in bootcamp ~updates first?
For installing XP on Macbook pro in bootcamp what updates should I have installed first? I have already installed parallels with XP and all is well but I have one PC program that will not run on parallels and needs to be setup in a Bootcamp environme
-
Manual creation of Oracle RAC Database
Hello Guru's, I successfully installed Oracle Grid(clusterware) and Oracle RDBMS 11.2.0.1.0 for RAC containing 2 nodes on Linux 5.3 64 bit. All the clusterware services and ASM instance are running fine on both nodes. Now im planning to create databa
-
I am trying to create a flowing table for a mortgage collection. Table labeled in 6 columns; Pay Date, Amount Paid, Interest, Principal, Balance Due, Interest paid Thru. The functions used are as follows, Interest = Balance due*6%/12 Principal = Amou
-
How to download without credit card on ipod
i have bought an ipod recently i had one before and i could change payment method to no card i want to do the same to this ipod but there is no none card option how do i download without a credit card? please tell me asap need it thank you sooo much!