Please help me to unable my ipad2 to play stream video from rtr planeta
Please help me to unable my ipad2 to play stream video from rtr planeta . Thank you!
I have no idea what rtr planeta is but if it uses Flash, it won't work very well or at all on an iOS device. If it is Flash, try the Skyfire browser... it is supposed to run some Flash sites. Review it carefully before purchase.
Similar Messages
-
yesterday I have purchased Ipad2 with 3G but did not able see in built aceTime on my scree do we need to Install? please Help, yesterday I have purchased Ipad2 with 3G but did not able see in built FaceTime on my scree do we need to Install? please Help.
See this support doc on how to use FT... http://support.apple.com/kb/HT4319
-
Please help, I am trying to split a HD mp4 video into two parts using Quicktime 10.2
Please help, I am trying to split a HD mp4 video into two parts using Quicktime 10.2, running Mountain Lion. I use trim then export but it doesn't give the movie option as a format. What would you suggest i do?
I'm not sure why you're using a FAT32 drive, but using ExFAT instead of FAT32 would be a better overall choice as it doesn't have the 4 Gig limit.
http://www.tech-recipes.com/rx/2801/exfat_versus_fat32_versus_ntfs/ -
Dear All,
Firefox hangs when i try to play flash videos from any site but when i run firefox as administrator it works fine. (but Google Chrome, Opera & I.E9 Plays videos without running as administrator.) I am using Windows 7 & Firefox 7.0.1. Please help.A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls -
Please help I just accidentally deleted a very very important note from my "Notes" on my iPhone 4s. How can I get it back?
Is there a "Trash" file somewhere for deleted notes?
Thank you,
SusanHad you never backed up the phone before? When you saw the iTunes logo and cable, the device was in recovery mode. The data was already lost. The only way to recover from that is to restore the device, which will delete all of your data. You will only be able to restore to your last backup, whenever that was. Sorry this happened, but this highlights the importance of doing regular backups. The backup is the only protection you have against a problem like this.
-
HT203477 PLEASE HELP I CAN HEAR SOUND BUT CAN'T SEE VIDEO(final cut pro x)what gonna on?
PLEASE HELP I CAN HEAR SOUND BUT CAN'T SEE VIDEO(final cut pro x)what gonna on?os x lion 10.7.4(11e53)
What's the video exactly? Open into the QT player and report what it says in the movie inspector or post a screen shot.
-
Please help needed os x lion I wish to transfer photos from the iPhoto library to a album or folder then delete them from the Library but when I do this it also deletes them from the album ? how do I do this please.
Albums are not places to store photos, they're more like "labels" you can apply to photos to better organize them. A single image file can be in multiple albums... they are not copies, it's simply been labelled as being in all those albums. So what you're trying to do doesn't make sense, because it's based on incorrect assumptions.
The iPhoto library will always show all photos that you have added to iPhoto. -
I lost all my pictures! Please help:( I added all my photo to a new album from the camera roll and i delete the picture that already move to new album, at last all my picture was gone !:'( Please, anyway to recover back all my photo? please help :'( Apple Service Center or Branch can help?
Albums is a way or sorting photos. Photos aren't moved from the Camera roll. The Camera Roll consists of all the photos on the phone. If you delete from Camera Roll they are deleted everywhere but Photo Stream.
Are you using Photo Stream? Your photos, providing they wer recent should still be in Photo Stream. If you have Photo Stream set up on your computer they should all be there. -
i set up my email account with ntlworld can somebody please help me why it keeps downloading emails i have deleted from about 4 years ago amounting to thousands of emails. thanks
Hi, is this POP or IMAP?
In Mail Preferences>Accounts>Mailbox Behaviors, what are settings for remove from server & such? -
my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...
Here you go:
http://support.apple.com/kb/ts1559 -
Please help! My iPhone 4s will not let me slide from off to no
Please help! My iPhone 4s will not let me slide from off to no
try this:
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost). -
Please Help, iTunes has taken my right to play certain songs
Please Help, iTunes has taken my right to play certain songs.
These were free songs with coco-cola codes some time ago.
Now in Mtn Lion it has took the playing rights from me and locked them off!
Anybodys help on this subject is much appreciated...Yes it worked,
Right-click in it > Show in Finder. Finally, right-click in that file > Get Info > Sharing & Permissions. See if you have got read permission,
Clicked through the Get Info > Sharing & Permissions and when I closed the window the song played again.
Not sure why but it worked for me! -
New to Quicktime-Please Help-Not Playing Streaming Video
_PLEASE HELP, I AM NEW TO THIS._ I can't see that Quicktime is playing streaming videos. I have the latest version of Quicktime including Perian and every other plug-in I can find. In System Preferences I have tried Automatic and Custom (Port 80) for the Transport Protocol. I have everything checked in the MIME settings. In Safari Preferences I have all the plug-ins enabled. The streaming videos play in Safari, but if I try to open ANY URL in Quicktime, it says URL INVALID. THANK YOU.
I dont believe you can put a youtube link in quicktime itself. An easy way to download them however is to add &fmt=18 for HQ videos or &fmt=22 for HD videos to the end of the youtube url ex http://www.youtube.com/watch?v=GRSbC6HAgNE&fmt=18 Then load that page and then in safari click window then activity. Find the one with the largest size (should be the only one in MB) and double click on it. THen it will download to where you set safari to download your files.
-
Need Help Streaming Video From Web Server Built Into Application - Linksys WRT54g Router
Very much appreciate any help getting streaming video feed from web server built into video application to work properly using port forwarding on my Linksys WRT54g wireless router.
Here is the situation:
My PC is connected to the internet via a Linksys WRT54g wireless router.
The Windows XP Pro SP2 firewall is enabled, with a firewall exception established for the video camera application.
On the router, forwarding of port 80 is enabled for the LAN IP address of the PC running the video application with an embedded web server, and the web server in the video camera application is also set to use port 80.
I have a free DYNDNS account and also run the DYNDNS updater program on the PC running the video application with embedded web server. According to the DYNDNS web site and the DYNDNS updater program, the IP address assigned to the machine running the video application with embedded web server is set correctly in my dyndns account.
When I open a browser (Explorer or Firefox) on the PC running the video camera application with embedded web server, I am able to connect to the video application's web server by going to the dyndns address linked to the machine running the video application. The video application's web server is set to use the dyndns address. That's the good news. The bad news is that I can't connect to the video application's web server from any machine that connects to the internet that uses a router other than the router used by the PC running the video application. I am only able to connect to the streaming video from the application's web server only on machines that connect to the internet using the same (home) router used by the PC that is running the video application.
Since I am able to connect to the video app's embedded web server successfully on the machine running the video application, it seems that at least something about the current port forwarding settings is correct. For example, if I uncheck 'enable' for forwarding of port 80 on the router settings page, I am no longer able to connect to the video app's web server when I try to do so in a browser running on the machine running the video app. When I re-enable port 80 forwarding on the router, I am again able to connect to the web server of the video application on the machine running the video app. I thought that by enabling forwarding of port 80 on the router and associating that port with the LAN IP of the machine running the video application, it would be possible to connect to the streaming video of the video app's embedded web server from ANY machine connected to the internet, but that is not the case. There must be some other router settings to update/change in order to get the port forwarding working to enable a successful connection to the video web server, but I am stumped. Very grateful for any suggestions as to how to get this working properly.
Thanks in advance...The firewall log can be configured on the third tab in the window for the firewall settings, where you can turn the firewall on and off completely.
From your tests, though, it does not seem to be the firewall. However, to be sure, it would be good to check the log. It will help to eliminate the firewall as the culprit and you may find it handy in the future, too. ;-) Just don't forget to turn the log off again after you are done because it may cause some performance penalty on your system while on.
From what you write, it seems as if I should give a little networking background on the ip addresses you'll see. Your setup is (or should be) a modem connected to the WAN/Internet port of the WRT. The computer is connected into a LAN port of the WRT.
Your router has two IP addresses (that's what makes it a router): a WAN address and a LAN address. The WAN address is the address assigned by the ISP. It is a normal internet IP address. Everyone is able to send packets to this IP address. The WAN address is the one reported by whatismyipaddress.com, it should be listed in the dyndns record and it is the address that your router shows on the Status page. It's the public IP address of your router. Dyndns maps your dyndns.org name to that IP address.
Your router also has an IP address on the LAN side. You can configure it to be whatever you want. The default is 192.168.1.1 with netmask 255.255.255.0 and it is better to leave it like that or at least inside the network 192.168.*.*. 192.168 is a special, reserved IP address range for private networks. Basically, routers in the internet are not supposed to forward addresses in this range. That makes them suitable for private LANs as the packets never can get anywhere. Most people using Linksys routers have there LAN in 192.168.1.*.
The router acts as gateway, which means it forwards packets from PCs in the LAN to the internet and back. As all your PCs in your LAN share a single WAN IP address, the gateway does address translation (NAT). This works only in one direction: from the inside to the outside. The router remembers when a PC in your LAN sends something out and accepts the responses in and sending them back to the PC. If something comes in from the internet which cannot be associated with a ongoing communication the packet is dropped unless you use port forwarding.
All computers in your LAN either have a static IP address assigned or use DHCP to get it automatically. The router has a DHCP server as well which gives out IP address from 192.168.1.100-149 if not changed. With a router with default settings static IP addresses can be in the range of 192.168.1.2-99 and 150-254.
ipconfig /all reports your IP address in your LAN, i.e. an address 192.168.1.*. The gateway in this output should be 192.168.1.1 which is your router. And packet no in the LAN address range 192.168.1.* is send to the router which forwards the packets into the internet.
An address 192.168.1.* should not appear as internet address in the Status page of the router nor should it appear at dyndns.
Port forwarding is used to operate a server in the LAN. By default, a server in the LAN cannot be reached from the internet. You have to configure port forwarding for this. You configure that traffic bound for a specific port (e.g. TCP port 80 for http) on your WAN IP address is forwarded to the same port on a specific LAN IP address. If your server runs on 192.168.1.50 than traffic to your WAN IP address port 80 is forwarded to 192.168.1.50 port 80. That way your HTTP server can be reached from the internet. As you can only configure a fixed IP address in port forwarding it is recommended that the server uses a static IP address and not DHCP as in the latter case the IP address may change over time...
O.K. so much for networking. I hope that makes things a little clearer and you can verify that your setup is how it is intended to be.
I suggest the following: on the router's security page there is an option to block WAN requests. Remove the check if it is set (meaning: do not block). After you did that change you should be able to ping your WAN address (e.g. ping xxxx.dyndns.org) from the internet. That way we know that it is on the correct address.
Also on the Administration page make sure that remote management is disabled (should be like that per default) or that the management port is NOT 80 but for example 8080. What is your your UPnP settings on the same page?
O.K. that should be enough for the moment... -
Unable to stream Videos from Mac and IPad 3 to TV
My Apple TV (1.Generation) is starting to work bad after an update.
I am no longer able to stream videos from IMac nor IPad 3 or IPhone 4.
Can anybody give me a help.
Thanks.Not sure if I'm missing something here. AirPlay is the newer audio video streaming technology Apple implemented into their devices. Airplay video from a computer requires a newer Mac running Mountian Lion and a 2G or higher ATV. Streaming video from iTunes to a 1G ATV still works, it is similar to AirPlay but is technically not the same thing.
Streaming video from an iPad or iPhone to an Apple TV is using AirPlay and also requires using a 2 or 3G ATV. These are hardware limitations no HDMI cable can fix.
If you can not stream video from iTunes by selecting it on your Apple TV you have a problem. If you are trying to send video to the ATV by selecting it on a device you need a new ATV and/or computer.
Maybe you are looking for
-
Will I lose files when I perform Lion Recovery?
Will I lose any files when I perform Lion Recovery? I have been having some problems with my 2011 MacBook Pro 13-inch lately and am considering using Lion Recovery to solve them.. Will I lose any of my files when installing a fresh copy of Lion with
-
AHH! Help! colors (not b&W) are negative - blue to orange etc..
All colors (not black and white) are inverted. the ol' universal access trick / control/opt/cmd/8 trick doesn't work! tried recalibrating colors to no avail.
-
WCF LOB template does not show in VS 2010 nor 2K13
Hi, I have 2 boxes, BTS 2K10 with VS 2K10 and BTS 2013R2 with VS 2K13. On both machines I have setup the WCF LOB but when firing VS, point to projects, I do not see the WCF lob template. I followed instructions I found in a couple of threads in this
-
Hi All From where could I get this software downloaded for Sun solaris SPARC kb
-
No scaling with fullscreen flash playback
Greetings, I have this problem where flash doesnt scale the video when I try to run it in fullscreen. Instead it centers the video on the middle of the screen, keeping the original size, with the rest of the screen becoming black. See the attached im