Please help me wifi problems

ok hears the deal when my mac is open iam connected to the internet but whenn i close the lid on the mac and open it again i loose the wifi so i have to to go to settings again to connect back again and this is really anoying

I'd been having this problem since upgrading to Lion and was getting very frustrated. Not only after sleep but during use of the laptop the wifi would drop out and I would have to do as you say. This was happening all the time. I googled to find a solution and one that I tried was to unplug our router and wait 15 seconds, then plug in and turn on. Wait for it to go through it's process, then restart your laptop. Since I did this yesterday I've no longer had the problem even after sleep mode. I hope it continues.

Similar Messages

My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem.

My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem. Iphone4s, 32gigs, IOS 7.1.2
I don't know why it stopped working but it happened a month or two ago but the option on this phone that's usually all the way to the left when you select your device but now its not and I don't know what caused it. ive already tried troubleshooting my problem but have found no help.

Hello Salmomma,
Thank you for the details of the issue you are experiencing when trying to connect your iPhone to your Mac. I recommend following the steps in the tutorial below for an issue like this:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Additionally, you can delete music directly from the iPhone by swiping the song:
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
iPhone User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
Thank you for using Apple Support Communities.
Best,
Sheila M.

[ETL]Could you please help with a problem accessing UML stereotype attributes ?

Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank you

Hi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana

HT5312 i forgot my secret question, please help me this problem. Thanks

I forgot my secret question, please help me this problem. Thanks

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
And/or see the More Like This section on the right.

Please help with slideshow problems!

Am using Photoshop Elements 8 and trying to make a slideshow. Have tried 4 times now and keep ending up with same problem, cannot reopen project to continue edititing. Won't show up in orginizer and when I find on harddrive and try to open get message " wmv file cannot be opened". How can I save a
slideshow inprogress and be able to reopen and continue to edit and make slideshow? I want to thank anyone who can help me with this in advance as I
have gotten so frustrated that I want to just scream.
Thanks

Thanks for the help, thought I had done so but maybe not. Anyway will have another go at it, now may I ask another
question? I am trying to add audio to slideshow. I have some music I purchased thru amazon as mp3 files but I get
message no codec and when I try to add wmv I get same message. What type of file do I need and how can I add
multiple songs to one slideshow. I have one little wmv file that will go in, but it just replicates itself multiple times until
it fills slide show.
Thanks again, sorry to be a bother, but this thing is driving this old man crazy.
Date: Sun, 26 Dec 2010 20:34:32 -0700
From: [email protected]
To: [email protected]
Subject: Please help with slideshow problems!
You need to save the slideshow project in order to be able to go back later and make changes or additions to an existing slideshow . The wmv file is a final output format.
Now you are most probably using only the Output command: that is what makes the wmv file.
You should also do the Save Project command. (and I make it a practice to do the Save Project command before I do the Output command).
If you look at the Elements Organizer 8 Help, there is a topic on "Create a slide show".
-- Very close to the beginning of that topic is a screen shot of the Sldie Show Editor screen,
-- The bar below the usual menu bar is labeled with a "B" and called the Shortcuts bar.
-- The 1st entry on that Shortcuts bar is "Save Project"
It is the Save Project command that saves the information about which photos, audio, etc you placed in that specific slide show so that you can come back again to do subsequent editing. Save each Project with a unique name.
After completing the Save Project command, you shoud see an "icon" in the Organizer for that slide show.
Note: you must also keep the photo files and audio files which you have used in this slide show: you can't delete them because the project file does NOT contain a copy of the photos, it only has the identification and folder location of the photo and audio files.
>

PLEASE HELP - my wife is going to kill me! Cannot locate her "books"

OK - Here is the scoop! (Call me stupid!) We have about 14 blazillion pictures in iPhoto and I was attempting to manage them alittle better so I downloaded the freeware "iPhoto Buddy" to help manage the pics. Well, I obviously did not know what the heck I was doing and the next time I opened up iPhoto, it appeared that all our pictures were gone. I re-imported them into iPhoto and everything was great, except that I was not able to locate the phot albums that my wife has ordered and made via iphoto and mac.
Well she was OK with that (if she had to be) and so she proceeded to create the new "grandmother's" Christmas books and then I got stupid again and tried to find all the old albums she had made. Well, I saw on IphotoBuddy's help info that if you wanted to go back to y our original library - go to "Use Default Library" and that is what I did. Once that was finished - it appeared all was OK again, with all the OLD albums loaded back in iPhoto again, but now the one that she had spent HOURS on was missing. I had to reload the last month's pictures, but that was fairly painless.
SO - FIRST of all - how do I get rid of iPhotoBuddy (if and when that is appropriate?)
SECOND - how can I find the photo album that she has just made? She has nt ordered it yet, but she spend HOURS on it.
THIRD - can I "streamline" the "album" issues that I have? What do I need? iPhot library? 2003 library? 2004 library, etc? Please advise-
Please help a man from being murderized! (not that I don't deserve it...)
Sproles

thesproles:
Welcome to the Apple Discussions. It's apparent that you have two iPhoto libraries in your Pictures folder, the original one and the new one with the new book. You can use iPB to move between the two libraries until the book is completed and purchased. Then delete the book library and go back to the original with all the albums.
You can use iPhoto Library Manager to move between the two also but iPLM will let you rename the libraries to better identify them. You can call the library with the book "Book Library" and the folder in the Pictures folder will be renamed Book Library.
OR, the paid version of iPhoto Library manager will let you copy rolls and/or albums from one library to another and keep keywords, comments, etc. intact. So you could copy all of the albums from the old library into the "Book Library" and let it become your primary library.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application, iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

I need some help with wifi problem on iTouch gen 4

i have a problem with my wifi on itouch gen 4, it only access wifi without password but password wifi,it always shows the message "incorrect password", i tried many solutions but those seem like impossible.Please help me solve it, thanks everybody!I

u got any
i>indoor
I>Indianapolis
l>Laptop
1>one
O>on
0>zero
as any of ur pswd? it could look like anyone of them since computers dont show in regular txt's of L's and i's nc capital "i" and a "L" has the same showing> "l" "I" ya dont know from each other apart, one of them is a L and the othe is a i, not on less u look at it very carefully, u could probably tell each other apart

PLEASE HELP WITH WIFI ON MY STORM 2

Someone please help me set up my wifi on my blackberry storm 2. Technically i'm connected, but my little wifi thing is GRAY not WHITE(which I know means that my data is off -the way I want it to be) but when I go on my browser it says "unable to connect, try again later "
Very frustrating !! If someone has a solution please let me know thanks

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

Please help -- slooooow wifi

I have a 1 year old MacBook Pro and am having trouble with my wifi connection. I connect via Qwest DSL. After an hour on the phone with Qwest and lots of tinkering, I've confirmed that everything but my Macbook connects at about 12mbps. My wifi connection, however, is .5mbps. Any ideas? The Qwest person was nice, but basically said the problem was with my mac. Please help!

Have you tried to connect to a different network - maybe a friend's wifi or a coffee shop? That would help determine if it's your internet connection or your computer. I have a mid-2009 MBP and I'm getting 20mbs download speeds (Comcast). So it's either your ISP or something weird going on with your system.

PLEASE HELP MY WIFI-ENCYPTION ISSUE!??!????!!!!!!!

I am having the same problem as everyone else on this board.
No encryption, the wi-fi works fine. With encryption, the wi-fi goes to edge for all internet related activities...
I HAVE TRIED EVERYTHING EVERYONE HAS SUGGESTED ON THIS BOARD TO NO AVAIL...
I've tried all the solutions offered here and nothing works... I think it is because everyone has different routers/ internet companies that the solutions are so varied. Meanwhile, I still need help...
I've even tried calling Apple. The first tier guy tells me there is a known issue with this and it has something to do with the cell service and Apple chose to release the iphone anyway, without any warning... and that ****** me off...
They send me to the second tier guy who tells me the issue is I need 128bit encryption, and my router is running at 64. I say fine, go turn the router to 128 bit encryption. Still does not work. Them they tell me I need to do a full reset and loose all my text messages. I then ask for a higher person and so far that is where it has been left.
Everyone, I am on SBCglobal.net-Yahoo DSL service - which has just been switched to Att. I have a Gateway router, 802.11b...
If anyone has fixed this problem, can you PLEASE email me or answer here. I am still on with Apple tech support and they don't know anything. I really love this phone but this issue is making me HATE it... and the fact that the techs have no idea what they are talking about is beginning to sour me on Apple. Someone HELP!P!!!!!!!!!

ISSUE SOLVED!!!!!!
They sent me to the top of top of Iphone folks - the product specialist. All this guy does is answer WiFi questions and solve WiFi problems. You will not believe this solution...
First, he told me that not everyone is having this issue. He said this issue is coming from older routers. Because iPhone uses the latest technology, it "likes" the WPA protocol instead of WEP, which he says is older technology that is PC friendly.
He also said, that while many people have tried many things, the solution will almost always depend on the type of router you have. Which is why some things work for some people and others don't work for all, and why nothing worked for me.
His solution which worked for me was:
1.) unplug router for AT LEAST 10 minutes
2.) reset network settings on iPhone [go to SETTINGS, then to GENERAL, then to NETWORK... then hit RESET NETWORK SETTINGS]
3.) power down iPhone [hold sleep/wake button 8 secs, then slide slider to off]
4.) turn on router [wait about 5 minutes for it to fully cycle up]
5.) Go to settings - WiFi - choose your network - when the password screen comes up, switch to Hex/ AscII, then enter password [no $] press enter.
And it came up!!!!!! And surfs without going to EDGE!!!! No dns crap, no static crap, nothing! When I asked him about it, since I had done all that and more, he said that with the iphone, it is not always what you do, but the timing and order you do it in... So everything needs to be cleared first before trying any option because the iphone will hold "widow" coding as you try the different options which will keep it from working.
If you want to talk to him directly, his name is TROY at 800-my-iPhone. He is a iPhone WiFi Product Specialist.
So for all of you who are still having a hard time, hopefully this helps.
I expect a long happy iPhone relationship after this initial glitch.
Thanks to all that helped!
-Talicia

PLEASE HELP - COLOR SHIFTING PROBLEM on output NTSC monitors

http://www.smmlv.com/testproject/
Above is a link to a layered photoshop file that has a USA map and over a dozen network overlays used in a section of our video. I animate each layer on sepeartely in the video and have noticed a major problem recently, the color of the art does not hold true to placement. I created the art originally in Illustrator and then converted the file to Photoshop at 640x480, 72dpi. This has always worked perfectly in the past to display and animated artwork in FCP.
Right now, in FCP I am using the NTSC DV 3:2 frame size, and the compressor of DV/DVCPRO - NTSC. I have a JVC Profressional DV deck that hooks up through firewire and sends S-Video to my monitors. This setup has always given me a great picture even though it is not completely upcompressed. Using these settings and this art, the color lines on this map in red, light blue, yellow and purple all have a "color shift" to the left about 5 pixels. It makes it appear that the line is where it is in the file, but the color overlaying the line is offset to the left 5 pixels and transperant to about 50%. This occurs only when viewed on some TV's and NTSC monitors and projectors. The strange thing is, some monitors display the color aligned almost perfectly on these maps and other monitors and projectors show this "digital halo" of color shifting really bad. If I take the layered network overlays in these colors and color tint them to black or grey, white, light green, or even light orange, they no longer have the color shifting and the detail is perfect.
Is there any way to fix this problem? I have tried duplicating the sequence and setting the compressor to 8bit Uncompressed, and while my captured footage is not this compression, in theory the art should render at this higher resolution setting. This did nothing to solve the problem.
I also have tried using different Broadcast safe and Y/C corrector filters with different results. The Y/C filter allowed me to reposition the color problem and thus removing most of the problem, but also removing most of the color. Nothing else has allowed me to seemingly move the color into the proper possition.
What is causing this color shift on the displayed NTSC image?
In FCP 4.5 I can see my rendered video in the program viewer screen and besides the pixel compression appearing on the lines, overall the video looks great paused or even better when playing. Then you view it through my deck onto my Pro Sony NTSC 19" color monitor and it also appears great, with a slight color halo to the left of these colors, but the color in the lines are there. If you are a few feet from the screen and know what you are looking for you might see it, but doubtful. Then you view it using the same signal on a 17" Samsung TV and the color shifting makes the map and other art, like the clients blue logo, look horrible, with each color line appearing twice and offset left from each other as if you had double vision. Normally I would think it is the TV causing this, but then we tested this same movie on 2 differnt projectors. The $700 Epson projector displayed everything beautifully, again with only the slightest color halo to the left, but then the Panasonic $4000 projector made everthing in these colors look double vision again. What is going on???
One more thing to keep in mind, my color bars also show this problem with these colors as well as shot footage of these facilities. There are tall red poles in the shots and everything displays fine except for the red pole color looks like it's glowing off the pole to the left.
PLEASE tell me there is a solution to this.

I have tried Degaussing, using filters, changing cables, and testing other monitors and systems on these monitors, everthing I can think of to solve the issue. Is it FCPo or is it the monitors?... or is it a signal strength thing. Can monitors and projectors shift color when the signal is read from a DVD or Mini DV Deck? Is there a fequency difference (Ie: 75mgz or 80 mgz) that might be causing the shift in some monitors and not so badly in others. But if this was true, how would some DVD's (like Baby Einstein DVDs that use really bright colors) display red and blue perfect using these same player and monitor, while my projects is shifting color? Doesn't that rule out the signal from the DVD player if other DVD's do not have this issue?
I have uploaded the original art used, an exported .jpg file from the FCP timeline and sample photos of 2 different monitors to show to show this problem as best I can. http://www.smmlv.com/testproject/
Someone out there must have had this problem before. There's no way a color shift problem like this with Mini DV has gone on this long without someone seeing it.
One last thing about what I have tried... I do understand that with editing in Mini DV instead of uncompressed or HD video I lose a bit of resolution (4:2:2) and I see this compression occuring in some of the areas in the video where these problems persist. But, I did remake the art and rerender this project in an 8bit uncompressed settings and then displayed that up on the screen and I get the same color shift. I keep going in circles trying to find the culprit that is causing the delema.
PLEASE HELP! There are large tours going through our facilities daily and the large screen projector is displaying this problem as well. Let's just hope they don't notice and that their TV's at home or office does not display it on our final DVD's made.

I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect to my MacBook it erases everything on had on there. Can someone please help with this problem?

I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.

dwgar1322 wrote:
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
Yes, you have WD software installed REMOVE IT !!
WD has warned its customers about their huge mistake that their software doesnt work on Mavericks and causes data loss.
(also dont use WD drives anymore)
Read all about it here:
https://discussions.apple.com/thread/5475136?start=255&tstart=0
See their website on removing the destructive WD software here:
http://community.wd.com/t5/External-Drives-for-Mac/External-Drives-for-Mac-Exper iencing-Data-Loss-with-Maverick-OS/td-p/613775
Western Digital External Hard Drives Experiencing Data Loss On OS X Mavericks
http://www.cultofmac.com/252826/western-digital-external-hard-drives-experiencin g-data-loss-on-os-x-mavericks/

PLEASE HELP.. PROBLEM WITH RESTORE

okey, well i have this huge problem. i got my ipod 2 weeks ago from the US, i live in poland and not many people know how these things work so i ask that someone here can help me..
a week ago.. the ipod froze my computer, i could do nothing with it. so i had to restart it.the problem was that my ipod was connected to the computer still.. but my comp wouldnt start so i had to disconnect the ipod.(yes the DO NOT DISCONNECT icon was on the ipod.. but wut else could i do?)
so my ipod froze then, and i had the apple icon the whole time on the screen, so i tried everything, i get so frustrated with the ipod that i just want to throw it out the window. i read some things about the problem on the suppoort page, i reset it about a hundred times.. and finally it started working when i got it into disc mode. Yes i got all happy.. I press the restore buttons in itunes.. and this is what happens.. the ( i dont know how to call it) scroll bar? well the green bar that moves to show that its 'restoring' it freezes in the middle of the process, i uninstalled itunes 10 times.. i even tried restoring on 2 other computers, on one of them it does the same thing and on the other theres some other problem.
PLEASE HELP ME!! I DONT know what to do.
ipod 5th gen 30gb Windows XP

____________________16.06V16, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
Universal Serial Bus Controllers:
Otwarty kontroler hosta PCI do USB SiS 7001, Magistrala PCI 0, urządzenie 2, funkcja 2. Device is working properly.
No IEEE 1394 Host Controller found.
The last connected iPod serial number: ****.
The iPod Service Logging Information:
[SERVICE: 0xB20,22:06:21 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Mon Nov 20 22:06:21 2006)
[SERVICE: 0xB20,22:06:21 INFO] ##### iPodService starting as a service, version: 7.0.2.16
[SERVICE: 0xB2C,22:06:22 INFO] Timed out... Starting device manager!
[SERVICE: 0xB54,22:06:22 INFO] Listener Window created
[SERVICE: 0xB54,22:07:32 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:32 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:32 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:34 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:34 INFO] device \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:34 INFO] device is an iPod
[SERVICE: 0xB54,22:07:34 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB54,22:07:34 INFO] [-1] set waiting to mount = 1
[SERVICE: 0xB54,22:07:34 INFO] [1] Assigning session 0
[SERVICE: 0xB54,22:07:34 INFO] [1] added device interface "\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0xB54,22:07:34 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0xB54,22:07:34 INFO] [1] added device number 1 to m_objDeviceNumberMap
[SERVICE: 0xB54,22:07:34 INFO] [1] added device interface "\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0xB54,22:07:34 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:34 INFO] [1] input #0 from src #0
[SERVICE: 0xB44,22:07:34 INFO] [1] input #0
[SERVICE: 0xB44,22:07:34 INFO] [MACHINE 1 INPUT #0] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:07:34 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:07:38 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:38 INFO] [1] input #1 from src #0
[SERVICE: 0xB48,22:07:38 INFO] [1] input #1
[SERVICE: 0xB48,22:07:38 INFO] [MACHINE 1 INPUT #1] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:07:38 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:07:39 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:39 INFO] [VolumeArrive] mask = 0x7D
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\G:
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xB54,22:07:39 INFO] iTunes device #1 found with drive letter G, mask 0x40
[SERVICE: 0xB54,22:07:39 INFO] [1] set waiting to mount = 0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\F:
[SERVICE: 0xB54,22:07:39 INFO] type 0x2 drive 0x1 partition 0xffffffff
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\E:
[SERVICE: 0xB54,22:07:39 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0xB54,22:07:39 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\D:
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x0 partition 0x2
[SERVICE: 0xB54,22:07:39 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB54,22:07:47 INFO] [VolumeArrive] mask = 0x40
[SERVICE: 0xB54,22:07:47 INFO] looking up device # for \\.\G:
[SERVICE: 0xB54,22:07:47 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xB54,22:07:47 INFO] iTunes device #1 found with drive letter G, mask 0x40
[SERVICE: 0xB54,22:07:47 INFO] [1] set waiting to mount = 0
[SERVICE: 0xB54,22:07:47 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:47 INFO] [1] input #2 from src #0
[SERVICE: 0xB4C,22:07:47 INFO] [1] input #2
[SERVICE: 0xB4C,22:07:47 INFO] [MACHINE 1 INPUT #2] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:07:47 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB50,22:07:51 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB50,22:07:51 INFO] [First Connect] Creating connect event for device 1
[SERVICE: 0xB50,22:07:51 INFO] [1] set waiting to mount = 1
[SERVICE: 0xB50,22:07:51 INFO] [1] input #3 from src #0
[SERVICE: 0xB44,22:07:51 INFO] [1] input #3
[SERVICE: 0xB44,22:07:51 INFO] [MACHINE 1 INPUT #3] - (HDW) Interface Arrival
[SERVICE: 0xB44,22:07:51 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0xB44,22:07:51 INFO] [1] progress is now 2
[SERVICE: 0xB44,22:07:51 INFO] [1] progress is now 2
[SERVICE: 0xB44,22:07:51 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0xB44,22:07:51 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0xB44,22:07:51 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0xB50,22:07:52 INFO] [First Connect] Creating mount event for device 1
[SERVICE: 0xB50,22:07:52 INFO] [VolumeArrive] mask = 0x7D
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\G:
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xB50,22:07:52 INFO] iTunes device #1 found with drive letter G, mask 0x40
[SERVICE: 0xB50,22:07:52 INFO] [1] set waiting to mount = 0
[SERVICE: 0xB50,22:07:52 INFO] [1] input #4 from src #0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\F:
[SERVICE: 0xB50,22:07:52 INFO] type 0x2 drive 0x1 partition 0xffffffff
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\E:
[SERVICE: 0xB50,22:07:52 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0xB50,22:07:52 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\D:
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x0 partition 0x2
[SERVICE: 0xB50,22:07:52 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB44,22:07:53 INFO] VendorId: Apple
[SERVICE: 0xB44,22:07:53 INFO] ProductId: iPod
[SERVICE: 0xB44,22:07:53 INFO] revision: 1.62
[SERVICE: 0xB44,22:07:53 INFO] vendor bytes:
[SERVICE: 0xB44,22:07:53 INFO] 02 01 00 00 00 00 00 00 00 0B 00 11 91 00 00 00 00 00 00 00
[SERVICE: 0xB44,22:07:53 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0xB44,22:07:53 INFO] [1] Power State: Powered
[SERVICE: 0xB44,22:07:53 INFO] [1] Checkpoint attempt #0
[SERVICE: 0xB44,22:08:01 ERROR] Did not find first letter of stage
[SERVICE: 0xB44,22:08:01 INFO] got HotPlugState 0
[SERVICE: 0xB44,22:08:01 INFO] [1] serial number 000A270015BEEE43
[SERVICE: 0xB44,22:08:01 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0xB44,22:08:01 INFO] [1] input #4
[SERVICE: 0xB44,22:08:01 INFO] [MACHINE 1 INPUT #4] - (HDW) Volume Mount
[SERVICE: 0xB44,22:08:01 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0xB44,22:08:01 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:08:01 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0xB44,22:08:01 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0xB44,22:08:01 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0xB44,22:08:13 ERROR] Did not find first letter of stage
[SERVICE: 0xB44,22:08:13 INFO] got HotPlugState 0
[SERVICE: 0xB44,22:08:17 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xB44,22:08:17 INFO] [1] ===== iPod with Video =====
[SERVICE: 0xB44,22:08:17 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0xB44,22:08:17 INFO] [1] iPod needs formatting...
[SERVICE: 0xB44,22:08:17 INFO] 22:8:17, year 2006, day of yr. 323, GMT offset 4 isDST 0
[SERVICE: 0xB44,22:08:17 INFO] [1] Perform launch updater check.
[SERVICE: 0xB44,22:08:17 INFO] [1] iTunes located at 'D:\iTunes.exe'
[SERVICE: 0xB44,22:08:17 INFO] [1] progress is now 0
[SERVICE: 0xB44,22:08:17 INFO] [1] *** MOUNT FAILED - Non-FAT32 device, device session 0
[SERVICE: 0xB34,22:08:57 INFO] <0x4> Got Serial #
[SERVICE: 0xBD0,22:09:01 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xBD0,22:09:01 INFO] <0x4> GetFormatType() returned unknown format 4
[SERVICE: 0xBD0,22:09:01 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xD04,22:09:01 INFO] Mounted
[SERVICE: 0xD04,22:09:01 INFO] [1] already mounted!
[SERVICE: 0xD04,22:09:01 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xB34,22:09:03 ERROR] ERROR, mount lock count is 0 but device is not mounted
[SERVICE: 0xBD0,22:09:07 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xBD0,22:09:07 INFO] <0x4> GetFormatType() returned unknown format 4
[SERVICE: 0xBD0,22:09:16 INFO] <0x1> Got Serial #
[SERVICE: 0xB34,22:09:16 INFO] <0x1> Got Serial #
[SERVICE: 0xB34,22:09:20 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xB34,22:09:20 INFO] <0x1> GetFormatType() returned unknown format 4
[SERVICE: 0xBD0,22:09:22 INFO] <0x1> Got Serial #
[SERVICE: 0xBD0,22:09:22 INFO] API is now LOCKED!!!
[SERVICE: 0xB54,22:11:15 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:11:15 INFO] [1] input #5 from src #0
[SERVICE: 0xB48,22:11:15 INFO] [1] input #5
[SERVICE: 0xB48,22:11:15 INFO] [MACHINE 1 INPUT #5] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:11:15 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:12:22 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:12:22 INFO] [1] input #6 from src #0
[SERVICE: 0xB4C,22:12:22 INFO] [1] input #6
[SERVICE: 0xB54,22:12:22 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:12:22 INFO] [1] input #7 from src #0
[SERVICE: 0xB44,22:12:22 INFO] [1] input #7
[SERVICE: 0xB4C,22:12:22 INFO] [MACHINE 1 INPUT #6] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:12:22 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:12:22 INFO] [MACHINE 1 INPUT #7] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:12:22 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:18:13 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:18:13 INFO] [1] input #8 from src #0
[SERVICE: 0xB48,22:18:13 INFO] [1] input #8
[SERVICE: 0xB48,22:18:13 INFO] [MACHINE 1 INPUT #8] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:18:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:21:48 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:21:48 INFO] [1] input #9 from src #0
[SERVICE: 0xB4C,22:21:48 INFO] [1] input #9
[SERVICE: 0xB54,22:21:48 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:21:48 INFO] [1] input #10 from src #0
[SERVICE: 0xB44,22:21:48 INFO] [1] input #10
[SERVICE: 0xB4C,22:21:48 INFO] [MACHINE 1 INPUT #9] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:21:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:21:48 INFO] [MACHINE 1 INPUT #10] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:21:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:44:23 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:44:23 INFO] [1] input #11 from src #0
[SERVICE: 0xB48,22:44:23 INFO] [1] input #11
[SERVICE: 0xB48,22:44:24 INFO] [MACHINE 1 INPUT #11] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:44:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:52:27 INFO] [VolumeRemoved] existing mask 0x40, arrive mask 0x20
[SERVICE: 0xB54,22:52:47 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:52:47 INFO] [1] input #12 from src #0
[SERVICE: 0xB4C,22:52:47 INFO] [1] input #12
[SERVICE: 0xB54,22:52:47 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:52:47 INFO] [1] input #13 from src #0
[SERVICE: 0xB44,22:52:47 INFO] [1] input #13
[SERVICE: 0xB4C,22:52:47 INFO] [MACHINE 1 INPUT #12] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:52:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:52:48 INFO] [MACHINE 1 INPUT #13] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:52:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:52:49 INFO] [VolumeArrive] mask = 0x20
[SERVICE: 0xB54,22:52:49 INFO] looking up device # for \\.\F:
[SERVICE: 0xB54,22:52:49 INFO] type 0x2 drive 0x1 partition 0xffffffff
Windows XP
well i clicked help.. and that didnt do anything either.. ;/

Please help, color printing problems.

I have snow leopard and just bought a new HP officejet 7500 wide format wireless all-in-one. The problem is when I Print from my boyfriend's PC, the pictures are fine but when I print from my imac, the image I see on the monitor isn't what is printed. The colors are off and the picture is way too dark. I've looked on the internet to try to find a solution but haven't really found one. Please help.

Hello
Driver from HP web site
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-86352-1 &cc=us&dlc=en&lc=en&os=219&product=4083652&sw_lang=
instruction for configurationn and use
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&tmp_task=setupCate gory&cc=us&dlc=en&lc=en&os=219&product=4083652&softwareitem=mp-86352-1&sw_lang=# N28
HP printer listing for os 10.6 support is not that clear but "HP Officejet Pro L7500 series" in on the list so you may not need to download driver from hp but only from apple
HTH
Pierre

Very frastrated. Please HELP! SX712 problem copying music from latptop to IC recorder

It worked before. I haven't used it for a while. Now, I wasted hours to try to solve this problem to no avail.
When I connected my SX712 IC Recorder to my laptop, I could see 3 folders: MUSIC, PODCAST and VOICE and one file: capability_01.
I copied a bunch of MP4 files to the MUSIC folder and then disconnected the IC Recorder from the laptop.
On the IC Recorder, I pressed the "folder" button. Only MUSIC and BOOKS were shown next to the Conversation icon. The Conversation icon was the only icon showing on the left panel. There was no MUSIC or PODCAST icons or any of the files that I copied over which were visible to me when the IC Recorder was connected to the laptop.
What did I do wrong?
Please HELP!
Many Thanks in advance...Mimi

Hi Mimi! The ICD-SX712 Digital Voice Recorder only supports MP3, WMA, AAC-LC and PCM files. MP4 files are not supported.
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/Win-4K

Please help me wifi problems

Similar Messages

Maybe you are looking for