Please help me with feedburner and iTunes! Help!

I'm knew to podcasting, so if someone could help me out you'd rock. I have a show on podbean.com, and my show is also on iTunes.
I burned the feed with feedburner, but feed burner shows 0 subscribers 0 listeners. Podbean.com shows hundreds of downloads.
Could someone explain to me IN PLAIN SIMPLE ENGLISH how to get iTunes to recognize my feed burner version of my feed?!?! I can't seem to make sense out of any answers online, and i am frustrated!
Here are my links, could someone simplify this for me? Thanks.
http://todayinipad.podbean.com/feed/
http://feeds.feedburner.com/TodayInIpad
-Dr. Brad

This is the problem with services like Podbean, they may make things easy, but you don't have a lot of control. The same is true of Feedburner, of course; mostly it works OK but you should be aware that if you wanted to change from it you would have the same problem. On the plus side, you can change the feed which you submit to Feedburner without upsetting iTunes, and of course you get the statistics which iTunes does not provide.
In order to remove your existing podcast, follow the instructions here. Then submit anew using the Feedburner feed, or another if you decide to do that.
However, if you keep the same title you will probably have the submission rejected on the grounds that a podcast of that name has already been submitted (even though it's been removed) - this appears to be a bug in the Store. You will probably need to make a small change to the title - a bit of punctuation, perhaps, such as 'Today - in iPad'; you could then change the title back once the feed has been accepted and is up and running.

Similar Messages

  • Real Problems with Feedburner and iTunes. Please help!

    I've tried numerous things to figure out whats going on but havent been able to pin point it. Maybe someone here can help. My latest podcast episode has not shown up in iTunes yet and it has been almost 2 days. I've tried pinging the iTS and pinging feedburner but I'm not sure what's going on. For my first 2 podcasts everything went fine but for this one, the feedburners site says it was unable to create an enclosure for the podcast. Any clues on where to even start? I'm not really a code guy so I don't know what to do. Here's my feed URL and the site I post my podcasts too:
    http://moviepool.wordpress.com/feed/
    http://moviepool.wordpress.com
    feedburner feed:
    http://feeds.feedburner.com/moviepool

    interesting. I see they are in the iTunes Store now. Last night after I pinged iTunes AND feedburner it didn't show up. What is the usual wait time for pinging the sites? Maybe I need to just be a little more patient
    All I care about are the actual mp3 episodes of my podcasts. I don't care about the other links or image files.
    Bones

  • I believe my ipads hard drive corrupted when i went from my macbook to a pc...I can get to the screen with cord and itunes but cant get past there to desktop of ipad...Any help would be appreciated....

    I believe my ipads hard drive corrupted when i went from my macbook to a pc...I can get to the screen with cord and itunes but cant get past there to desktop of ipad...Any help would be appreciated....

    Try using this article to help with your iPad not showing up in iTunes---
    http://support.apple.com/kb/TS1538     -This deals with the device not being recognized in iTunes for Windows
    The following steps work well with iPod but i would try them for help with your iPad issue:
    Try connecting your iPad to another USB port directly on the computer. Verify that you're connecting it to a high-powered USB 2.0 port on your computer to be sure iPad is getting power. If you're connecting to a Windows laptop computer through USB, connect the laptop to a power outlet before connecting your iPad. Also, see iPod not recognized when connected to Windows laptop over USB to be sure that your USB ports are supplying enough power.
    Avoid connecting to an external USB hub. If a hub must be used, make sure the hub is USB 2.0, and that it has its own power supply. Also, make sure the hub is connected to a high-power USB 2.0 port on your computer.
    If the issue persists, try disconnecting other USB devices from the computer such as printers, cameras, scanners, external hard drives, and USB hubs to determine if there is a conflict in the USB chain.

  • Problem with podcasts and iTunes 6.0.1.3

    Hi everybody!
    First of all, please excuse my poor English: I'm French. I'll try to do my best to write as well as I can.
    I have some difficulties with podcasts and iTunes 6.0.1.3.
    When I "sign up" (FR: "s'abonner") to some podcasts, they are not updated in my iPod nano indeed (and some others are), although iTunes says: "Your iPod is updated" (FR: "Votre iPod est à jour").
    I have no way to put these podcasts episodes in my iPod...
    Could you help me please?
    Thanks in advance for your help!

    Hi iFriend,
    try this, it worked for me:
    1) first of all, uninstall QuickTime and older versions of iTunes from your PC, using the "remove" button in the "install applications" tool that you find in the windows control panel.
    2) reboot the system
    3) turn off the windows firewall application; go into the windows control panel, double click on windows firewall and disable the firewall option
    4) if you have one, disable your Anti-Virus application; i mean its real-time protection.
    5) probably it's not necessary, but for being sure... download and launch the standalone installer of QuickTime (latest version)
    6) download and launch the iTunes + QuickTime installer from this web address
    7) as an option, i suggest you to download and install also iTunes Art Importer. It's a nice application, that allows you to import from the internet directly into iTunes the album ArtWorks of the selected tracks in iTunes. I installed it, and it works very well with iTunes 6.
    8) after all the installations, remember to enable both firewall and anti-virus previously disabled!
    as i said, probably the 5th passage is not necessary, but i did it and it worked!
    if you have any questions or feedbacks, just relpy to this topic. stay iTuned!
    bye, bye,
    Marco

  • Hi. I have an IPAD2 with IOS6 and itunes 11. I can see my music files in itunes but not in my music apps.

    Hi. I have an IPAD2 with IOS6 and itunes 11. I can see my music files in itunes from my Windows PC but not in my music apps on the IPAD. I can even play the music files on my IPAD in itunes.

    Hi there,
    You may find the article below helpful.
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    -Griff W.

  • Why won't some photos or videos sync to my iPad when they work fine with iPhoto and iTunes?

    Why won't some photos or videos sync to my iPad when they work fine with iPhoto and iTunes? Other photos taken with same camera sync fine from iPhoto while certain events are inexplicably incompatible. I've recently foundvthecsame occurrence with certain mp3s and videos from iTunes.

    For photos try deleting the photo cache from your computer and then re-try the photo sync and see if they then copy over - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314
    Not all video formats that work in iTunes are compatible with the iPad - the supported formats are (from http://www.apple.com/ipad/specs/) :
    Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Have you tried Advanced > Create iPad Version and then sync those versions to the iPad
    The iPad's supported audio formats are :
    HE-AAC (V1 and V2), AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV

  • What is the Nano 6th gen battery life with nikeplus and itunes running together

    Thinking about buying a 6th gen Nano- what is the batt life with Nike+ and iTunes running together?

    Mine is about 4 hours, but I'm not sure if that's typical or if I have a defective battery.

  • Microphone works with Utube and iTunes but only with earphones for games and Facebook

    Microphone works with Utube and iTunes but only with earphones for games and Facebook, obviously the microphone works but is there something I need to turn or or something to get the external microphone to work for everything?

    Microphone works with Utube and iTunes but only with earphones for games and Facebook, obviously the microphone works but is there something I need to turn or or something to get the external microphone to work for everything?

  • Just got an ipadmini. screen stuck with usb and itune motiff image?

    How to unlock ipadmini screen. Stuck with usb and itune image. Tried to turn off with sleep button and home button. No luck

    Your iPad is in recovery mode and you need to restore the device now. Take a look at this kb support article.
    http://support.apple.com/kb/ht1808

  • Connecting Problems with iPhone and iTunes. Help please?

    When I connect my iPhone 4 to my laptop (Toshiba), I have a huge issue with connecting and syncing my phone on iTunes. During the time it is plugged and attached to my laptop, I can charge it and sync photos that are on my device to the compter, but I can not get it to sync with iTunes. Also, I do not know what my iTunes is fuctioning at (6.1- 7.1- 8.etc), but I did updated it about a month ago. Does anyone have any information and /or/ helpful advice on this topic?
    Thank you!

    Hi CookiCat,
    Follow the troubleshooting steps in the link below:
    http://support.apple.com/kb/TS1538
    Cheers,
    GB

  • HELP WITH IPOD AND ITUNES MUSIC

    for a reason unknown my music in itunes has been wiped! just dissapeared.  the music is still on my ipod, the only music i get from my ipod back onto itunes are recent purchases. does anyone know how i can get music from my ipod back onto my itunes?? thank you.

    It has always been very basic to always maintain a backup copy of your computer.  Use your backup copy to put everything back.
    If for some reason you have failed to maintaina  abckup, not good, then you can transfer itunes purchases from an ipod:  File>Transfer Purchases or you can redownload some itunes purchases in som countries:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • NO PHONE TAB IN ITUNES PREFS problem with V3i and iTunes

    Hey everyone. Just got a V3i and it won't mount in iTunes. It mounts on my desktop, and iSync, but not in iTunes. In iTunes Preferences I don't see the Phone tab. There's iPod, Parental, Music Store, Sharing,Advanced and all that but no Phone Tab. I've tried formatting the card several times, reset the phone, repaired permissions, and changed the cable. Nothing has worked. I just find it strange that iTunes Prefs does not show the Phone Tab to make edits. I have the Phone driver kext and the latest iTunes 6.0.5 also installed. Anyone with this problem solved please help. Thanx.
    iMacintel, Dual 500 G4, Converted G4 Pismo Powerbook   Mac OS X (10.4.7)  

    The setup has changed a bit. With your iPod connected to iTunes, click on the iPod's name. You will see the "Summary" page. You will also notice various tabs. This is where you will find the area to set-up syncing your contacts, etc.

  • IPhone 4 with iOS6 and iTunes 10.7 on PC/Vista won't sync!!!

    Just updated my iPhone 4 to iOS 6 and my iTunes to 10.7. And now they won't sync. I get the "tone" indicating that the device is recognized when I plug into the usb port, but my iPhone does not appear as a device in iTunes, nor does the iPhone even appear as a device in My Computer. Have uninstalled and reinstalled iTunes. No luck. Have reverted back to installing iTunes 10.6.3 but then it won't open properly becasue the file "iTunes Library.itl" was created by a newer version of iTunes. So back to iTunes 10.7. Have run the iTunes diagnostics and get the below log. Nothing is working. Please help.
    Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
    iTunes 10.7.0.21
    QuickTime 7.7.2
    FairPlay 2.2.19
    Apple Application Support 2.2.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.0.59
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number ****
    Current user is not an administrator.
    The current local date and time is 2012-10-08 22:20:30.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., ATI Radeon HD 3450
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 10.7.0.21 (x64) is currently running.
    iTunesHelper 10.7.0.21 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) ICH10 Family USB Universal Host Controller - 3A34.  Device is working properly.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A35.  Device is working properly.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A36.  Device is working properly.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A37.  Device is working properly.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A38.  Device is working properly.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A39.  Device is working properly.
    Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A.  Device is working properly.
    Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    OHCI Compliant IEEE 1394 Host Controller.  Device is working properly.
    Most Recent Devices Not Currently Connected:
    iPod touch (4th generation) running firmware version 6.0
    Serial Number:          CC*******T75
    iPhone 4 (GSM) running firmware version 6.0
    Serial Number:          DX*******P0N
    <Edited By Host>

    OK, getting closer. Looks like it may have something to do with my Apple Mobile Device USB Driver. I get this message when I look at it in Device Manager: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
    Unfortunately, when I try to update the driver Windows tells me that I have the latest version of this driver.
    Is there another remedy?

  • Problem with IPod and Itunes

    Hi
    Can anyone please help me I installed Itunes latest version and updated the old version on the PC. Now when I connect my ipod it showsin the side bar of itunes only to give a message saying it is in recovery mode and I need to restore factory settings. After having done this reluctantly - it is supposed to then be visible after the ipod has rebooted in itunes - it isn't and if I connect again says the same thing about recovery mode. I now have an ipod that effectively has nothing on it and I cannot use has any had the same problem or got any ideas?
    Many Thanks
    Karen

    Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore
    Towards the end it says "If after restoring your iPod, the message described above reappears, the iPod drive letter may need to be reassigned. See the "Change the Drive Letter" section of this document for steps to assign a different drive letter" which contains a link to this article: Windows confuses iPod with network drive and iTunes may exhibit strange behavior in relation to the iPod.

  • I'm struggling with iOS6 and iTunes [new iPad Cellular]

    Last night I connect my new-ipad cellular and was informed to update iOS6. And yes, I did agree to update. After iTunes downloaded and it started updating software + firmware as usual. I think there should be no problem. After finishing updating firmware, I received a notification from iTunes: your ipad is restarting... But in the end, nothing happened. My iPad stayed silent. Power button and Home button have no effect now. I tried to plug ipad to my mac again and restart iTunes. The same notification, saying that my iPad is in recovery mode and I need to restore. This loop never ends. And my iPad doesn't work again.
    Please tell me what is the problem. if there is an issue of iOS6, software and firmware, please fix it NOW.
    I want my iPad back to work.
    All of my data was lost and I cannot use my iPad anymore. What a disaster!!!
    PLEASE HELP ME!!!

    Restart the Mac and hold down Command+Option+R. Choose to reinstall OS X. The version of OS X your Mac came with will be installed.

Maybe you are looking for

  • Activating data in DSO got dump SAPSQL_EMPTY_TABNAME after BW system copy

    Hi all, We had an issue after system copy. After a system copy the data in the standard DSOs(all of them) cannot be activated. The DOSs themselves are active, the transformations are active but if one attempts to load data and activate u2013 it does

  • Make PO Box City field as required when either of other fields r non-blank

    Hi, I need your help and valuable suggestion to fix this problem. While Creating/Changing a vendor, I would like to input some data in the PO box address area (Table LFA1). If I populate the fields PO Box & Postal code fields in this area, the PO box

  • Express document "Update was terminated" in CS62 order BOM change

    Hi All, I am creating one sales order BOM with reference to Material BOM. While creating BOM, we have setup BOM creation in such a way that while creation BOM status will be inactive. While changing status to active using CS62 transaction, I am getti

  • Why won't my computer update ilife '11?

    I have iLife '11, and it won't update. in the past i had a similar problem with iWork, and i found the solution. I had moved iWork from its default folder and the updater couldn't find the apps. so i think i did the same thing here. after i put iwork

  • 2 Developement Systems (4 System Landscape)???

    Dear all, an Idea of a person in our project is (because he wants make make sure that nobody/no further project destroys - nonsense but reality) that we have to customize new objects etc. in a further development system AB2 an transport these into th