Please help me with multiple threads

I don't understand much about multiple threads, so can anyone help me with this? can you show me a small simple code about multiple threads?

Do you understand much about google? yahoo?

Similar Messages

Please help me with this error: "Apple application support was not found... Error 2"

Can anyone please help me with this error: "Apple application support was not found... Error 2"
I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
"Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
Thank you

iTunes "Apple Application Support is required... Error 2" and possible fix.
I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
Problems:
The initial error during the installation of iTunes was:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
The error (after installing iTunes) when trying to run iTunes was:
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
http://support.microsoft.com/kb/2688946
This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Note: The installation of VC++ rolls back when it fails.
Solution:
Through this error I found this MSKB article:
http://support.microsoft.com/kb/946414
The Automated MS "Fix It" msi package didn’t work.
Note: Please backup your registry first (see the above MSKB article for instructions).
I opened the registry and (as instructed in the MSKB article) deleted the following keys:
HKEY_LOCAL_MACHINE\COMPONENTS\
PendingXmlIdentifier
NextQueueEntryIndex
AdvancedInstallersNeedResolving
Reboot and reinstall iTunes.
If it helps you please like this so others can find it.

Please help me with spry bar menu

I have laid out my page with the div tags in Dreamweaver. I defined the different sections by putting colors in them until i am ready to put stuff into them however when i insert the spry menu bar into my navigation section, the area below it is behaving like a drop down box of color. What i mean is that the area below which is supposed to stretch from left to right as a single box is now broken up by a different color box the width of the spry bar and goes down to the next box. When i preview it in the browser the page appears normal. How can i get rid of the intruding box in dreamweaver.

HI
I am practicing for the webmaster design course pratical exam. The web page i will be asked to construct will consist of a home page with two or three other pages pages in the site it will have to link to. I know how to do most of the steps individualy but i do not know in what order some of them are done. What i mean is this. ... after setting up the root folder..images..laying out the divs .. i would like to know ... at what point do i do the various things like, set up a styles folder...make a template... make the other pages of the site ..etc. I think i am able to do nearly all of these things but not sure in what order they should be done so the site will work.
I have reached the point where i have established the site and layout, i.e. the wrapper, logo, navigation,header,bodycontent,right and left columns, clearbar, footer. i would like someone to list the sequence i should follow after this. I am praticing on a trial CS5.5 which seems to simplfy to a freat extent what we learned on the course because it is a later version. The version we used on course was CS4 and if the pratical is in this version then i will need to know how it is done in this format.
Date: Sun, 22 Jan 2012 17:45:18 -0700
From: [email protected]
To: [email protected]
Subject: Please help me with spry bar menu
Re: Please help me with spry bar menu created by Nancy O. in Dreamweaver - View the full discussion
If this only happens in DW Design View, use Live View or turn off your CSS display.
View > Style Rendering > un-tick Display Styles.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4157994#4157994
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4157994#4157994. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How do you disable "Run with Multiple Threads" in a standalone EXE

I have a program written in Labview 6.1. After moving to a different hardware platform, my program has started crashing at the same point every time it is run. I eventually found out that the cause of the crash is the fact that the new hardware has a dual core processor. I confirmed this by disabling "Run with multiple threads" and now the program works fine. What I need to know now is how to disable the same setting in a built EXE file, since as far as I know the "Run with multple threads" setting only affects execution in the Labview Dev environment.
Thanks for any help,
Dave

Greg McKaskle once posted that using a non-reentrant (VI is NOT re-entrant) wrapper VI to make the calls to the dll will prevent simultaneous execution of the dll.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Please help me with this indicator on my screen...it has reduced voice quality

Please help me with the rectangular symbol on the top next to the speaker symbol. It seems that I have turned on some option by mistake and everytime I make or receive a call, this symbol comes up. It wasn't the case earlier.
Because of this my voice call quality has dropped significantly. Please help soon.
Thanks,
itsmits
Solved!
Go to Solution.

Sure, it's been answered here in the forums many many times.
That is the call Audio Boost indicator.
To change it, press your green dial key > Menu key > Enhanced Audio Boost.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My MacBook Pro iTunes movie purchase is not showing in iTunes store movie purchases nor does it show on my iPad or Apple TV. Can someone please help me with a solution? Thanks.

First of all, I live in Ho Chi Minh City, Vietnam. Sometimes, I use a VPN to search on the web here. I purchased Toy Story 3 on my MacBook Pro 2011 OS/X - Lion through iTunes. I initially had trouble downloading it which may be due to being on and off the VPN but after a while it finally downloaded and shows up in my iTunes library on my MacBook.
Under my Apple ID account (which is the only Apple ID account I have), I look under purchase history and it shows that I paid for Toy Story which is where I got my Order # from. But if you go to the iTunes Store then to the Quick Links then click on Purchased, under all my Movies, it does NOT show Toy Story 3 as one of my movies.
Now when I go to my iPad (3rd gen.), Toy Story 3 does not show up under purchased movies (all or not on my iPad). It does not show up on my Apple TV as well. If I want to have Toy Story 3 on my iPad or Apple TV, then it says I have to purchase it again.
I have searched for help via Apple support communities but so far none of their solutions have worked for me. I have tried logging off iTunes & App Store on iPad and also shutting down the iPad. I also made sure that under iTunes Preferences>Store that iTunes in the Clouds purchases is checked. Can someone please help me with this? Your consideration is greatly appreciated. Thanks.

Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items.

I bought a movie the movie Godzilla 2014 recently but it didn't show up in my library. I went check the itunes store and it wants me to buy it again. Please help me with this problem.

I just bought this movie "Godzilla 2014" but it won't show in my Movie Library. I closed my Itunes and put it back on again but still won't show up. I checked my purchased list and it shows that I recently bought the movie but when I checked the itunes store it wants to buy the movie again. Please help me with this right away Apple.

Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

HELP!!!! My Hotmail no longer works with Safari v. 5.0.6 and my Imac Leopard operating system 10.5.8. Please help me with any suggestions on what to do. Thank you.

HELP!!!! My Hotmail no longer works with Safari v. 5.0.6 and my Imac Leopard operating system 10.5.8. Please help me with any suggestions on what to do. Thank you. I cannot find any new downloads for Safari that work with Leopard. The newest ones only work with Lion. My Firefox browser still works though but I would rather use Safari and cannot access any e-mails or send any e-mails via Safari. This happened about 3 weeks ago and I thought it was just a glitch on Hotmail's site. Now I realize Hotmail must have released an update that no longer works with Leopard 10.5.8. PLEASE HELP ME!!!! Thanks to anyone and everyone who reads this and attempts to help me. I do not know what to do....

Hi Sue,
What exactly happens when trying Safari?
They did change it to Outlook recently, but while not pretty, I can access mine with Safari 4.0 still...
You can also set it up in Mail so you don't need a browser at all if you want.

Hello, Honestly I just updated my 4s and my iPad 3 to iOS 6 and when try to press on the Music app or the iTunes app it says "cannot connect to iTunes Store" Could you please help me with this thank you so much, Charbel from Lebanon

Hello, Honestly I just updated my 4s and my iPad 3 to iOS 6 and when try to press on the Music app or the iTunes app it says "cannot connect to iTunes Store" Could you please help me with this thank you so much, Charbel from Lebanon

See these previous discussions help.
App Store Updates (but only Updates)...: Apple Support Communities
Apps suddenly don't update: Apple Support Communities

Please help me with an error 1418...

OK I have iPod mini 4GB and I have the latest iTunes installed 7.02 or something I don't know anymore.
Anyway a sad iPod icon displayed on my screen a few days ago and I managed to restart it and to put it in a disk mode and then iTunes finally recognized iPod and I clicked on Restore and then Restore and Updated and after a few seconds during the restore process it says:
An iPod 'iPod' couldn't be resoterd. An unknown error occurred (1418).
I am desperate and i don't know what to do.
I read almost everything about this but nothing helped.
Please help me with any kind of solution...

I did a Support Search for that error number and this is what I got. I hope one of these links helps:
http://docs.info.apple.com/article.html?artnum=304508
http://docs.info.apple.com/article.html?artnum=304996

I cannot install itunes on my windown 7 laptop. Error says "computer not modified". Please help me with this problem.

I cannot install Itunes and Icloud on my Sony Vaio Laptop - Window 7. Error says " computer/system not modified". Please help me with this problem.

Hello there, jag123059.
The following Knowledge Base article offers up some great steps to follow for resolving issues with installing iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Hi there. Can someone please help me with copying photos from my old iPad to my new one? Thanks.

Hi there. Can someone please help me with copying photos from my old iPad to my new ipad2? Thanks.

If you have a pc, when you plug your iPad in you should see the windows pop up window offering to backup the photos. Do that and it will save all your photos and videos to your computer where you can then sync them back to your new one.
If the pop up doesn't come up, double click on my computer and navigate your way to the iPad. Double cick on it an d navigate to the DCIM folder. Drag your photos and videos to your pc, then sync them back onto your iPad.

Query Issue in Creating a View....Please help me with this query..

I would like to create a view on this table with four columns
1. PN#_EXP_DATE
2. PN#
3. PN#_EFF_DATE
4. PN#
P_S_C     A_C     P     EXP_DT
21698     13921     1     5/29/2009 3:15:41 PM
21698     13921     1     5/29/2009 3:54:57 PM
21698     1716656     4     5/29/2009 3:15:41 PM
21698     3217     3     5/29/2009 3:15:40 PM
21698     3217     3     5/29/2009 3:54:57 PM
21698     60559     2     5/29/2009 3:15:41 PM
21698     60559     2     5/29/2009 3:54:57 PM
I have a trigger on A, which inserts the DML records into B. (Table A and B structure is the almost the same,
                                   where table B will have one extra column exp_dt)
NOw Table B can have records with same P_S_C and A_C columns and exp_dt will capture the history.
for example: from the above sample data, let us take first two records..
P_S_C     A_C     P     EXP_DT
21698     13921     1     5/29/2009 3:15:41 PM     --- Record 1
21698     13921     1     5/29/2009 3:54:57 PM     --- Record 2
from this..
Note: 1. Table A and Table C can be joined using A.P_S_C and C.R_C to get the start_date.
2. PN# comes from table D. It contains numbers for the resp. weeks.
3. PN#_EFF_DATE is the previous immediate previous date for that record in history table (Table B).
I wanted the data like..
---- this is for the second record in the above..
PN#_EXP_DATE PN# PN#_EFF_DATE PN#
5/29/2009 3:54:57 PM     214 5/29/2009 3:15:41 PM     214
---- this is for the first record in the above..
PN#_EXP_DATE PN# PN#_EFF_DATE PN#
5/29/2009 3:54:41 PM     214 ( for this we should query the table C to get the
                    start_date, for this combinatation of P_S_C and A_C in table B
                         where B.P_S_C = C.A_C
                         and that value should be the EFF_DT for this record)
Please help me with this....
Thanks in advance..

Hi All,
select d.P# as "PN#_EXP_DATE", exp_date
from daily_prd d, cbs1_assoc_hist b
where to_char(d.day_date,'MM/DD/YYYY') = to_char(b.exp_date,'MM/DD/YYYY')
and d.period_type = 'TIMEREPORT';
This above query gives the output as follows:
pn#_exp_date exp_date
214     5/29/2009 3:15:40 PM
214     5/29/2009 3:15:41 PM
214          5/29/2009 3:15:41 PM
214          5/29/2009 3:15:41 PM
214          5/29/2009 3:54:57 PM
214          5/29/2009 3:54:57 PM
214          5/29/2009 3:54:57 PM
This below is the data from history table (Table B).
P_S_C     A_C PLACE EXP_DATE
21698          3217          3     5/29/2009 3:15:40 PM
21698          13921          1     5/29/2009 3:15:41 PM
21698          1716656          4     5/29/2009 3:15:41 PM
21698          60559          2     5/29/2009 3:15:41 PM
21698          13921          1     5/29/2009 3:54:57 PM
21698          3217          3     5/29/2009 3:54:57 PM
21698          60559          2     5/29/2009 3:54:57 PM
I got the pn#_exp_date from the Table 'D', for the given exp_date from Table B.
My question is again....
CASE - 1
from the given records above, I need to look for exp_date for the given same P_S_C and A_C.
in this case we can take the example...
P_S_C     A_C PLACE EXP_DATE
21698          3217          3     5/29/2009 3:15:40 PM
21698          3217          3     5/29/2009 3:54:57 PM
In this case, the
pn#_exp_date exp_date     pn#_eff_date eff_date
214     5/29/2009 3:15:57 PM     < PN# corresponding to the     5/29/2009 3:15:40 PM
                    eff_date .>
                    <Basically the eff_date is
                    nothing but the exp_date only.
                    we should take the immediate before one.
In this case, our eff_date is '5/29/2009 3:15:40 PM'.
but how to get this.
CASE - 2
from the above sample data, consider this
P_S_C     A_C PLACE EXP_DATE
21698     1716656     4     5/29/2009 3:15:41 PM
In this case, there is only one record for the P_S_C and A_C combination.
The expected result :
pn#_exp_date exp_date               pn#_eff_date eff_date
214     5/29/2009 3:15:41 PM     < PN# corresponding to the     5/29/2009 3:15:40 PM
                    eff_date .>
               <Basically the eff_date is
               nothing but the exp_date only.
                    we should take the immediate before one.
In this case to get the eff_date, we should query the Table 'C', to get the eff_date, which is START_DT column in this table.
for this join B.P_S_C and C.R_C.
Hope I am clear now..
Thanks in advance.....

Please help me with the logic

Hi All,
I have a number on the selection-screen.I need to prepare a structure with fields equal to the number provided on the selection screen.please help me with it.
Thanks in advance,
kushagra sharma

Hi Kushagra,
Below is one way of doing it.
First create a dynamic internal table, taking number of fields from selection screen using cl_alv_table_create=>create_dynamic_table.
Then create a dynamic structure for that dynamic internal table.
Ex:
DATA:fcat_wa TYPE lvc_s_fcat,
     fcat_itab TYPE lvc_t_fcat,
     poi_itab TYPE REF TO data,
     poi_itab1 TYPE REF TO data,
     cha(4) TYPE c.
FIELD-SYMBOLS: <itab> TYPE STANDARD TABLE,
               <wa> TYPE ANY.
PARAMETERS: p_num TYPE i. " Number of fields
DO p_num TIMES.
cha = sy-index.
CONCATENATE 'F' cha INTO cha.
CONDENSE cha NO-GAPS.
fcat_wa-fieldname = cha.
fcat_wa-datatype = 'STRG'.
APPEND fcat_wa TO fcat_itab.
ENDDO.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
    it_fieldcatalog           = fcat_itab
IMPORTING
    ep_table                  = poi_itab
EXCEPTIONS
    generate_subpool_dir_full = 1
    OTHERS                    = 2.
ASSIGN poi_itab->* TO <itab>. " Dynamic internal table
CREATE DATA poi_itab1 LIKE LINE OF <itab>.
ASSIGN poi_itab1->* TO <wa>. " Dynamic structure
Hope it helps u.
Thanks,
Edited by: Sap Fan on Oct 28, 2009 3:41 PM

Please help me with the following two questions, very urgent

Hi All,
Please help me with some scenerios about what are the common problems when modifying a standard script such a standard Invoice script and how can we overcome them.
What are the common problems encountered when working with SAP SMARTFORMS and how to overcome them?
Please help me with these questions, its very urgent.
Thanks in advance.
MD.

hi
hope it will help you.
reward if ehlp.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)

Please help me with multiple threads

Similar Messages

Maybe you are looking for