Please help me with my iPods when connected to the computer is turned on but after disconnecting the computer will not start

help

Thanks for your reply, but I've already done that and the Column Browser options are completely grayed out.  I've taken a screen shot and hope I can paste it in here.  You'll see I have the sidebar open.  That's the way I prefer to deal with iTunes.
This happened after I updated to iTunes 11.0.4.  Perhaps that changed the setting options. I think I had the Column Browser option prior to that, but I just got a new iPod and I was busy loading stuff, so not completely sure if it worked before the update.  But I think I would have noticed, because it bugs me so much not to have the option.

Similar Messages

  • My iphone4 when connected to any computer will not charge and is constantly connected and disconnected.  does the same with itunes.  Also i'm talking on the phone and all of a sudden the other person can not hear me.

    My iphone4 when connected to any computer will not charge and is constantly connecting and disconnecting.  It does the same with itunes so it doesnt really sync.  Also when talking to someone, all of a sudden they cant hear me.

    I'm having the same issue. I went to my local apple store and they could not work me into the genius bar so i made an appointment for tomorrow morning. The clerk did check the phone for the pink indicators at the top and bottom of the phone (where you plug in your USB or headphones) He said if you can see a pink indicator dot you may have gotten it wet, or had some sort of condensation in it, which could cause the plugs to not work.
    In regards to people not being able to hear you, i'm waiting for my appointment tomorrow for more news! I would recommend taking it into your local apple store for more answers.

  • Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,thanks, Derek

    Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,any ideas? thanks, Derek

    Dave I'm glad to say that it works perfectly but I'm embarrassed to say that my 12 year old nephew hooked it up in about 10 minutes.
    If you have the Kanex Mini DisplayPort cable it will work, what confused me was changing the display settings in System Preferences,
    and dragging the mac screen from the mac onto the tv. Sorry I cant be more helpful but you have the right cable now you need a 12 year old nephew.
    Good luck Derek

  • My apple tv, when connected to the television, will only show an itunes icon with a usb cord

    My apple tv, when connected to the television, will only show an itunes icon with a usb cord. I don't know whay to do?

    Don Sullivan wrote
    "Same thing just happened to  me. There was a software update available, it installed the update and then died with that visual on the screen. Reset doesn't work and it won't even show up in iTunes to try and do anything with it. I think they just bricked it on me."
    Same thing just happened to me too...
    I did an update a couple of days ago: and it seemed to be working fine. Just did another update today: got a flashing light, sometimes a blank screen, and sometimes the itunes logo / USB symbol...

  • My computer will not start up. It powers up I get the gray screen with the apple and get the loading progress bar it loads to 25% and the screen goes black

    My computer will not start up. It powers up, I get the gray screen with the apple, then the loading progress bar starts loading to about 25% the the screen goes black. what can I try to get my computer up and running?

    Carolyn Samit wrote:
    iMac, Mac OS X (10.7.1)
    Use Command + R for Lion Recovery
    Try restarting, when you hear the startup tone hold down the Option key. Then choose the Recovery Partition.

  • When install iTunes 11.1.4   It says Apple Mobile Device Service service will not start.  It was started when I began the installation.  Is this an Apple software bug?

    When install iTunes 11.1.4   It says Apple Mobile Device Service service will not start.  It was started when I began the installation.  Is this an Apple software bug?

    I have this issue. It isn't the MSVCR80 issue. No matter what I do nothing will let me even INSTALL Apple Moblie Device. Further details are in my thread:
    https://discussions.apple.com/thread/5831093

  • HT1883 I am trying to run a hardware test. The Computer will not start with the "D" key held?

    I am trying to run a hardware test. The Computer will not start with the "D" key held?

    If you are using a Blutooth keyboard, don't hold the "D" key until the keyboard is recognised (green light)
    Running AHT in Lion
    http://support.apple.com/kb/PH4510

  • Please help me with my Ipod Touch 4th Gen.

    I erase all the data of my ipod touch 4th generation by clicking the settings and go to erase all data.  after erasing the indicator shown that the data is erasing but suddenly it hang up and only the apple logo shown.  I tried to press the sleep and wake up button but it still my device is not starting.  What should I do?  Please help me.

    i did it already ckuan but still the apple logo only displayed and not the menu. is there any solution for that?

  • Why cannot I see my music on my iPod when connected to the pc, using Windows explorer

    I am having problems with seeing my iPod Classic in my Windows Explorer.... when connecting using the correct leads I can only see the non-essential directoris, my music is hidden and is shown as F1, F2, F3,etc......
    Please help as I wish to transfer the music to my netbook...
    Thanks

    Those F1, F2, etc., folders are the ones containing your actual music.  If you copy these over to your Desktop and then into iTunes most of your track tags should still be with associated with the correct tracks in these folders.  Some may not.
    B-rock

  • ITunes on my computer does not recognize my IPod when connected to my computer

    When my Ipod is connected to the computer, it does not recognize there is a device. I have been able to sync my Ipod to my Itunes in almost 4 months. Songs transfer to Ipod but the playlists do not. I have tried to figure out the problem and nothing has worked so far to correct the problem. I hope someone is able to help me.

    Hello bre8613,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning recognition issues:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Your iPhone, iPad, or iPod touch may not appear under Devices in iTunes after you connect it to your Windows PC. Any of the following may also occur:
    The device cannot be restored in iTunes.
    An exclamation point, question mark, plug symbol, or "X" appears next to the device's entry in Device Manager.
    During an update or restore, the device may no longer be recognized by iTunes
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Unable to access song list in ipod when connected to the computer.

    My daughter loaned her ipod to a friend who tried to download some music to her ipod. A box opened asking if she wanted to delete all her songs from her ipod and she was given yes, no, and cancel. She pushed cancel and got out.
    My daughters ipod has not worked correctly since.
    When connected to the computer and logged into iTunes she can see all the songs in her ipod but they are light in color and she can not play or pick songs from the list. She can't delete anything from her list in the ipod. She can play her music from the computer list just fine.
    What has happened and can we somehow get her ipod back to working correctly?

    Hello jhfields,
    So, you are saying that you are unable to pick and choose songs from the Music list for the iPod while it is plugged into iTunes?
    If the songs are grayed out, it is probably because the iPod is set up to automatically sync. In order to play music from the iPod through iTunes, you have to enable the "manually manage music and videos" option from under the iPod's Summary tab.
    Does that do the trick for you?
    B-rock

  • HELP! my computer will not start!

    Help Please...my powerbook g4 12" will not start up. when i power up, a white screen with a gray apple in the center is all that i see. i was reading some posts on this website, and found some information to bypass, and help move into safe mode, but when i get to the point where i am holding the shift key and the small gear looking thing is turning, it gets to a certain point and the computer shuts itself off. the computer was purchased in 2003, and has worked fine. the only thing i can think of that might have triggered a problem is that i just had to purchase a brand new power supply from apple, other than that there have been no changes in use. any and all assistance is greatly appreciated.
    thanks
    Karin K.

    Karin:
    i cleaned off my hard drive and started over...
    I am not sure what you mean by "cleaned off", but if you mean an erase and install, you lose everything on the HDD. I recommend a reinstall only after we have exhausted other possibilities because it is the ultimate invasive procedure. It is also important to have a backup before attempting any major procedure.
    i dont have the upgrades i made previously
    If you mean the OS upgrades, try this:
    Go to Applications > Utilities > Disk Utility.
    Select your HDD (manufacturer ID) in left side bar.
    Select First Aid in main panel.
    Click Repair Disk Permissions.
    Download and install Mac OS X 10.4.11 Combo update (PPC)
    Computer will restart after installation.
    Repair Disk Permissions as previously.
    Go to Apple Menu > Software Update
    Install all updates.
    Repair Disk Permissions as previously.
    is there any way to prevent this in the future?
    1. Make sure you always have a current backup. The best way to do this is to clone your entire HDD to an external firewire HDD using a utility like SuperDuper or Carbon Copy Cloner
    2. Develop a regular maintenance schedule. Here are a couple of articles that will help:
    Mac OS X 10.3/10.4: System maintenance
    Macintosh OS X Routine Maintenance
    Please do post back if you have further questions or comments.
    Good luck
    cornelius

  • My firefox installation is complete on my PC with Win XP, the icons are up, but the program will not start... no process or anything in task manager... any idea what is going on?

    bought a second hand laptop running Windows xp. When I go to download firefox, the installation goes seemingly smooth, but the program will not open. There are no firefox processes showing in task manager when I do this. I just downloaded chrome instead, but it sucks and I want firefox but my computer rejects it. This computer runs every other program I use without a hitch
    == This happened ==
    Every time Firefox opened
    == after installation ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

    thanks chris for the reply back,i have solved the massive problem i have had with MF 3.6.3 it ws COMODO FREE FIREWALL i had a sneaking suspicion all a long it could have been that but was not sure?,my pc had slowed down since installing comodo i am pretty sure of that,there were lags and pauses ect ect on general usage of the pc even though cpu usage was ok?,so maybe if many pc users that have comodo firewall installed they might like to try a change to another firewall and see if it helps,i went back to OUTPOST FREE FIREWALL which i had for ages without ANY problems whatsoever.
    regards
    john
    mozilla firefox build 3.6.3

  • Please help me with my iPod

    Hi there, I have a Problem, when I connected my iPod mini with my computer It said I have to update it to the lastest software, I downloaded the iPod udater 2005-11-17, when I did so, the computer perfectly read my ipod, it showed exactly it's name and the memory I had in songs, I tried to update it, but later it said that it couldn't write over the firmware or something likke that, later, I connected it again and it couldn't read it, it showed my iPod i gray color (my iPod is gold) and in name and memory it said N/A, what can I do, every time I connect it is the same, please help me

    http://www.apple.com/support/ipod/

  • Please help me with my mac. when i turned it on, a small question mark icon (?) appears at the center.

    hi,
    Please help me out with my MAC model m6497. when i turned it on, only a smallquestion mark appears at the center and does not proceed to its descktop at all

    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
    Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    Or if you are running 10.7 Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 partition.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Maybe you are looking for

  • OUT PUT ERROR

    HI      WHEN I AM EXECUTING THE FOLLOWING PROG I AM GETTING AN ERROR "MAXIMUM NUMBER OF INTERNAL SESSIONS REACHED". DOES ANY ONE HAS ANY IDEA ABT IT. REPORT  ZSPOOL14. TABLES:TSP01. PARAMETERS: P_EMAIL1 LIKE SOMLRECI1-RECEIVER,             P_EMAIL2 L

  • Ipad mini dispay black line on bottom of screen

    ipad mini has blacyk lines on bottom of the screen

  • How shall i run servlets in weblogic 8.1 sp2

              can any one assist me for running servlets in weblogic8.1 sp2.           thanking you,           chandra sekhar           

  • RAID 5 Question - separate volume for OS/Apps: pros/cons

    What are the pros & cons of having 2 volumes on a Mac Pro RAID 5 (instead of one big volume): Vol 1: OS & Applications Vol 2: Home Folders (basically everything else) 1) Is this a good idea/bad idea? 2) For what purposes would this setup be best used

  • Declaration of Rabge table Paramater in Global class method

    Hi Friends, I have created a Global class with a method GET_DATA. In that method,i have written the like  : select * from kna1 into table it_kna1where kunnr in S_kunnr. But, I am getting the error with Range table S_KUNNR. Kindly, Let me know how I s