Please help me.... with my nano plus

can someone please help me.. im having problem with creative zen nano plus.. it wouldnt play anymore wen i plug in the usb and open the folder, there is a warning said that the request could not be performed beacuse of an i/o device error.. what should i do with my nano plus? huhuhu please help me i already miss my nano plus....

Go to Creative.com and click the Support link. Look for the firmware driver for your Zen Nano and follow the directions. I had to do this to fix my Zen Nano Plus, because it had the exact same problem that yours had.
Good luck!

Similar Messages

Please help me with my Nano P

I recently purchased a Zen Nano Plus and am having difficulty getting my laptop to recognize it. When I connect it via the USB it takes an ungodly long time for it to appear in my Windows Explorer (although I get notification in the lower right of my screen that it's connected).After say 30 minutes of waiting, it finally appears but I can't transfer music or anything. I was finally able to get the firmware update (which I saved to the desktop) to connect with it. Then I got some sort of error message in the process, but it did appear as if the firmware was updated. Last thing I did was reboot and try to connect it again. Nothing appears on the little display panel, I cant even turn it on now and it's not being recognized by my IBM Thinkpad at all. I'm using a USB hub, but I even tried connecting to a USB card and no success at all. I just purchased a Vision:M at few weeks ago and had no problems whatsoever. I initially installed both softwares on the same dri've but put the Nano plus onto another hard dri've in case there was a conflict. But the only conflict I'm having is w/ the Nano plus.

Looks like there are a lot of us experiencing this kind of trouble with the Nano Plus. I've noticed that when I uninstall the USB 2.0 drivers for my motherboard (Intel 865PE chipset), the Nano Plus works perfectly (although painstakingly slower because it reverts back to USB .). Install it, and the problem occurs. I read somewhere in the knowledge base that certain chipsets from VIA, ALI, Intel and Nvidia have problems working with the Nano Plus. Whether it's the fault of the Nano Plus or the chpset, Creative isn't sure (but that's too many chipset makes against one device... makes it kinda obvious, doesn't it's) Looks like this thing will give you a good time only if you have the right PC for it. Otherwise, might as well get another player.

Please help me with Ipod Nano

Hi There
Just got a new ipod nano for Christmas want to set up on my lap top but I don't know where to plug it in to get the set up assistant. I have a packard bell lap top and the only place that you seem to be able to plug it in is the USB port but it says not to do that in the instructions. When you do plug it in there it just comes up with ipod folder in the e drive and nothing happens on the Ipod. Please help how do I get up the set up assistant???
Thanks

First for new user guide
http://docs.info.apple.com/article.html?artnum=304914
Ok, download and iTunes 7 on your computer
b]Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
Connect your iPod with the USB port of your computer, and the window will pop up and just follow the steps for installation

Please help - problems with iPod Nano

I saw a page in my Popular Science magazine and it had iPod Linux. So I went to the website installed it, and it worked!!! But the problem is , is that when I plug it in to my computer, it charges but won't show up as a drive. Please help!!!!!!!!!!!!!

Even within the iPod Linux Project the Fifth Generation iPod and the Nano are unsupported hardware so you are pretty much on you own, however check these links out:
iPod Linux Unsupported - What if Something Goes Wrong
iPod Linux Project- My iPod is really messed up, how can I fix it?

Please help me install backup assistant plus

please help me install backup assistant plus

I would recommend you use Google android services for you device. I have used Google in almost all of my phones and with never a problem. Backup assistant plus is not as stable or as easy to use as Google. Just set up a Google account if you don't have one already (and I'm sure you do) . Give it a try
Do a Google backup
1. Sign in to your Google's device, online account and go to settings.
2. Personal, Backup and reset, and select both Backup my data and Automatic restore.
3. Go to Settings, Personal, Accounts & Sync, and select your Google account.
4. Select all of the option boxes listed, to ensure that all available data is synced.
5. Though the specific procedure may slightly vary between Android devices, the process is generally the same.

Please Help me with Oracle Reports (10G)

Hi ,
I have created a report in Oracle 10G and save it as .JSP file, while i tried to open
that .jsp file through edit plus i observed that reportbuilder have generated a code for what i have done in Layout but all the code is commented, why was it happened so , Do it effect the functionality of my report.
Please help me with this
Thanks and Regards
Kalyan Chitti

Hello Chris90909,
switch width an height properties as Inol mentioned.
http://nycapex.blogspot.com/2010/03/landscape.html
If you have any question about the issue, let us know.
Don't forget to mark Correct or Helpful accordingly.

TS3700 I am facing this issues that music stops playing when the display goes...Please help me with this...:)

I am facing this issues that music stops playing when the display goes...Please help me with this...:)

Did you see the article linked at the top of this page?
iPod nano (6th generation): Music stops when display turns off
B-rock

My MacBook Pro iTunes movie purchase is not showing in iTunes store movie purchases nor does it show on my iPad or Apple TV. Can someone please help me with a solution? Thanks.

First of all, I live in Ho Chi Minh City, Vietnam. Sometimes, I use a VPN to search on the web here. I purchased Toy Story 3 on my MacBook Pro 2011 OS/X - Lion through iTunes. I initially had trouble downloading it which may be due to being on and off the VPN but after a while it finally downloaded and shows up in my iTunes library on my MacBook.
Under my Apple ID account (which is the only Apple ID account I have), I look under purchase history and it shows that I paid for Toy Story which is where I got my Order # from. But if you go to the iTunes Store then to the Quick Links then click on Purchased, under all my Movies, it does NOT show Toy Story 3 as one of my movies.
Now when I go to my iPad (3rd gen.), Toy Story 3 does not show up under purchased movies (all or not on my iPad). It does not show up on my Apple TV as well. If I want to have Toy Story 3 on my iPad or Apple TV, then it says I have to purchase it again.
I have searched for help via Apple support communities but so far none of their solutions have worked for me. I have tried logging off iTunes & App Store on iPad and also shutting down the iPad. I also made sure that under iTunes Preferences>Store that iTunes in the Clouds purchases is checked. Can someone please help me with this? Your consideration is greatly appreciated. Thanks.

Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items.

I bought a movie the movie Godzilla 2014 recently but it didn't show up in my library. I went check the itunes store and it wants me to buy it again. Please help me with this problem.

I just bought this movie "Godzilla 2014" but it won't show in my Movie Library. I closed my Itunes and put it back on again but still won't show up. I checked my purchased list and it shows that I recently bought the movie but when I checked the itunes store it wants to buy the movie again. Please help me with this right away Apple.

Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

HELP!!!! My Hotmail no longer works with Safari v. 5.0.6 and my Imac Leopard operating system 10.5.8. Please help me with any suggestions on what to do. Thank you.

HELP!!!! My Hotmail no longer works with Safari v. 5.0.6 and my Imac Leopard operating system 10.5.8. Please help me with any suggestions on what to do. Thank you. I cannot find any new downloads for Safari that work with Leopard. The newest ones only work with Lion. My Firefox browser still works though but I would rather use Safari and cannot access any e-mails or send any e-mails via Safari. This happened about 3 weeks ago and I thought it was just a glitch on Hotmail's site. Now I realize Hotmail must have released an update that no longer works with Leopard 10.5.8. PLEASE HELP ME!!!! Thanks to anyone and everyone who reads this and attempts to help me. I do not know what to do....

Hi Sue,
What exactly happens when trying Safari?
They did change it to Outlook recently, but while not pretty, I can access mine with Safari 4.0 still...
You can also set it up in Mail so you don't need a browser at all if you want.

Hello, Honestly I just updated my 4s and my iPad 3 to iOS 6 and when try to press on the Music app or the iTunes app it says "cannot connect to iTunes Store" Could you please help me with this thank you so much, Charbel from Lebanon

Hello, Honestly I just updated my 4s and my iPad 3 to iOS 6 and when try to press on the Music app or the iTunes app it says "cannot connect to iTunes Store" Could you please help me with this thank you so much, Charbel from Lebanon

See these previous discussions help.
App Store Updates (but only Updates)...: Apple Support Communities
Apps suddenly don't update: Apple Support Communities

Please help me with an error 1418...

OK I have iPod mini 4GB and I have the latest iTunes installed 7.02 or something I don't know anymore.
Anyway a sad iPod icon displayed on my screen a few days ago and I managed to restart it and to put it in a disk mode and then iTunes finally recognized iPod and I clicked on Restore and then Restore and Updated and after a few seconds during the restore process it says:
An iPod 'iPod' couldn't be resoterd. An unknown error occurred (1418).
I am desperate and i don't know what to do.
I read almost everything about this but nothing helped.
Please help me with any kind of solution...

I did a Support Search for that error number and this is what I got. I hope one of these links helps:
http://docs.info.apple.com/article.html?artnum=304508
http://docs.info.apple.com/article.html?artnum=304996

I cannot install itunes on my windown 7 laptop. Error says "computer not modified". Please help me with this problem.

I cannot install Itunes and Icloud on my Sony Vaio Laptop - Window 7. Error says " computer/system not modified". Please help me with this problem.

Hello there, jag123059.
The following Knowledge Base article offers up some great steps to follow for resolving issues with installing iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Hi there. Can someone please help me with copying photos from my old iPad to my new one? Thanks.

Hi there. Can someone please help me with copying photos from my old iPad to my new ipad2? Thanks.

If you have a pc, when you plug your iPad in you should see the windows pop up window offering to backup the photos. Do that and it will save all your photos and videos to your computer where you can then sync them back to your new one.
If the pop up doesn't come up, double click on my computer and navigate your way to the iPad. Double cick on it an d navigate to the DCIM folder. Drag your photos and videos to your pc, then sync them back onto your iPad.

Query Issue in Creating a View....Please help me with this query..

I would like to create a view on this table with four columns
1. PN#_EXP_DATE
2. PN#
3. PN#_EFF_DATE
4. PN#
P_S_C     A_C     P     EXP_DT
21698     13921     1     5/29/2009 3:15:41 PM
21698     13921     1     5/29/2009 3:54:57 PM
21698     1716656     4     5/29/2009 3:15:41 PM
21698     3217     3     5/29/2009 3:15:40 PM
21698     3217     3     5/29/2009 3:54:57 PM
21698     60559     2     5/29/2009 3:15:41 PM
21698     60559     2     5/29/2009 3:54:57 PM
I have a trigger on A, which inserts the DML records into B. (Table A and B structure is the almost the same,
                                   where table B will have one extra column exp_dt)
NOw Table B can have records with same P_S_C and A_C columns and exp_dt will capture the history.
for example: from the above sample data, let us take first two records..
P_S_C     A_C     P     EXP_DT
21698     13921     1     5/29/2009 3:15:41 PM     --- Record 1
21698     13921     1     5/29/2009 3:54:57 PM     --- Record 2
from this..
Note: 1. Table A and Table C can be joined using A.P_S_C and C.R_C to get the start_date.
2. PN# comes from table D. It contains numbers for the resp. weeks.
3. PN#_EFF_DATE is the previous immediate previous date for that record in history table (Table B).
I wanted the data like..
---- this is for the second record in the above..
PN#_EXP_DATE PN# PN#_EFF_DATE PN#
5/29/2009 3:54:57 PM     214 5/29/2009 3:15:41 PM     214
---- this is for the first record in the above..
PN#_EXP_DATE PN# PN#_EFF_DATE PN#
5/29/2009 3:54:41 PM     214 ( for this we should query the table C to get the
                    start_date, for this combinatation of P_S_C and A_C in table B
                         where B.P_S_C = C.A_C
                         and that value should be the EFF_DT for this record)
Please help me with this....
Thanks in advance..

Hi All,
select d.P# as "PN#_EXP_DATE", exp_date
from daily_prd d, cbs1_assoc_hist b
where to_char(d.day_date,'MM/DD/YYYY') = to_char(b.exp_date,'MM/DD/YYYY')
and d.period_type = 'TIMEREPORT';
This above query gives the output as follows:
pn#_exp_date exp_date
214     5/29/2009 3:15:40 PM
214     5/29/2009 3:15:41 PM
214          5/29/2009 3:15:41 PM
214          5/29/2009 3:15:41 PM
214          5/29/2009 3:54:57 PM
214          5/29/2009 3:54:57 PM
214          5/29/2009 3:54:57 PM
This below is the data from history table (Table B).
P_S_C     A_C PLACE EXP_DATE
21698          3217          3     5/29/2009 3:15:40 PM
21698          13921          1     5/29/2009 3:15:41 PM
21698          1716656          4     5/29/2009 3:15:41 PM
21698          60559          2     5/29/2009 3:15:41 PM
21698          13921          1     5/29/2009 3:54:57 PM
21698          3217          3     5/29/2009 3:54:57 PM
21698          60559          2     5/29/2009 3:54:57 PM
I got the pn#_exp_date from the Table 'D', for the given exp_date from Table B.
My question is again....
CASE - 1
from the given records above, I need to look for exp_date for the given same P_S_C and A_C.
in this case we can take the example...
P_S_C     A_C PLACE EXP_DATE
21698          3217          3     5/29/2009 3:15:40 PM
21698          3217          3     5/29/2009 3:54:57 PM
In this case, the
pn#_exp_date exp_date     pn#_eff_date eff_date
214     5/29/2009 3:15:57 PM     < PN# corresponding to the     5/29/2009 3:15:40 PM
                    eff_date .>
                    <Basically the eff_date is
                    nothing but the exp_date only.
                    we should take the immediate before one.
In this case, our eff_date is '5/29/2009 3:15:40 PM'.
but how to get this.
CASE - 2
from the above sample data, consider this
P_S_C     A_C PLACE EXP_DATE
21698     1716656     4     5/29/2009 3:15:41 PM
In this case, there is only one record for the P_S_C and A_C combination.
The expected result :
pn#_exp_date exp_date               pn#_eff_date eff_date
214     5/29/2009 3:15:41 PM     < PN# corresponding to the     5/29/2009 3:15:40 PM
                    eff_date .>
               <Basically the eff_date is
               nothing but the exp_date only.
                    we should take the immediate before one.
In this case to get the eff_date, we should query the Table 'C', to get the eff_date, which is START_DT column in this table.
for this join B.P_S_C and C.R_C.
Hope I am clear now..
Thanks in advance.....

Please help me.... with my nano plus

Similar Messages

Maybe you are looking for